/* $OpenBSD: pluart.c,v 1.6 2017/08/29 13:33:03 jsg Exp $ */ /* * Copyright (c) 2014 Patrick Wildt * Copyright (c) 2005 Dale Rahn * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB #include #endif #include #include #include #include #include #define DEVUNIT(x) (minor(x) & 0x7f) #define DEVCUA(x) (minor(x) & 0x80) #define UART_DR 0x00 /* Data register */ #define UART_DR_DATA(x) ((x) & 0xf) #define UART_DR_FE (1 << 8) /* Framing error */ #define UART_DR_PE (1 << 9) /* Parity error */ #define UART_DR_BE (1 << 10) /* Break error */ #define UART_DR_OE (1 << 11) /* Overrun error */ #define UART_RSR 0x04 /* Receive status register */ #define UART_RSR_FE (1 << 0) /* Framing error */ #define UART_RSR_PE (1 << 1) /* Parity error */ #define UART_RSR_BE (1 << 2) /* Break error */ #define UART_RSR_OE (1 << 3) /* Overrun error */ #define UART_ECR 0x04 /* Error clear register */ #define UART_ECR_FE (1 << 0) /* Framing error */ #define UART_ECR_PE (1 << 1) /* Parity error */ #define UART_ECR_BE (1 << 2) /* Break error */ #define UART_ECR_OE (1 << 3) /* Overrun error */ #define UART_FR 0x18 /* Flag register */ #define UART_FR_CTS (1 << 0) /* Clear to send */ #define UART_FR_DSR (1 << 1) /* Data set ready */ #define UART_FR_DCD (1 << 2) /* Data carrier detect */ #define UART_FR_BUSY (1 << 3) /* UART busy */ #define UART_FR_RXFE (1 << 4) /* Receive FIFO empty */ #define UART_FR_TXFF (1 << 5) /* Transmit FIFO full */ #define UART_FR_RXFF (1 << 6) /* Receive FIFO full */ #define UART_FR_TXFE (1 << 7) /* Transmit FIFO empty */ #define UART_FR_RI (1 << 8) /* Ring indicator */ #define UART_ILPR 0x20 /* IrDA low-power counter register */ #define UART_ILPR_ILPDVSR ((x) & 0xf) /* IrDA low-power divisor */ #define UART_IBRD 0x24 /* Integer baud rate register */ #define UART_IBRD_DIVINT ((x) & 0xff) /* Integer baud rate divisor */ #define UART_FBRD 0x28 /* Fractional baud rate register */ #define UART_FBRD_DIVFRAC ((x) & 0x3f) /* Fractional baud rate divisor */ #define UART_LCR_H 0x2c /* Line control register */ #define UART_LCR_H_BRK (1 << 0) /* Send break */ #define UART_LCR_H_PEN (1 << 1) /* Parity enable */ #define UART_LCR_H_EPS (1 << 2) /* Even parity select */ #define UART_LCR_H_STP2 (1 << 3) /* Two stop bits select */ #define UART_LCR_H_FEN (1 << 4) /* Enable FIFOs */ #define UART_LCR_H_WLEN5 (0x0 << 5) /* Word length: 5 bits */ #define UART_LCR_H_WLEN6 (0x1 << 5) /* Word length: 6 bits */ #define UART_LCR_H_WLEN7 (0x2 << 5) /* Word length: 7 bits */ #define UART_LCR_H_WLEN8 (0x3 << 5) /* Word length: 8 bits */ #define UART_LCR_H_SPS (1 << 7) /* Stick parity select */ #define UART_CR 0x30 /* Control register */ #define UART_CR_UARTEN (1 << 0) /* UART enable */ #define UART_CR_SIREN (1 << 1) /* SIR enable */ #define UART_CR_SIRLP (1 << 2) /* IrDA SIR low power mode */ #define UART_CR_LBE (1 << 7) /* Loop back enable */ #define UART_CR_TXE (1 << 8) /* Transmit enable */ #define UART_CR_RXE (1 << 9) /* Receive enable */ #define UART_CR_DTR (1 << 10) /* Data transmit enable */ #define UART_CR_RTS (1 << 11) /* Request to send */ #define UART_CR_OUT1 (1 << 12) #define UART_CR_OUT2 (1 << 13) #define UART_CR_CTSE (1 << 14) /* CTS hardware flow control enable */ #define UART_CR_RTSE (1 << 15) /* RTS hardware flow control enable */ #define UART_IFLS 0x34 /* Interrupt FIFO level select register */ #define UART_IMSC 0x38 /* Interrupt mask set/clear register */ #define UART_IMSC_RIMIM (1 << 0) #define UART_IMSC_CTSMIM (1 << 1) #define UART_IMSC_DCDMIM (1 << 2) #define UART_IMSC_DSRMIM (1 << 3) #define UART_IMSC_RXIM (1 << 4) #define UART_IMSC_TXIM (1 << 5) #define UART_IMSC_RTIM (1 << 6) #define UART_IMSC_FEIM (1 << 7) #define UART_IMSC_PEIM (1 << 8) #define UART_IMSC_BEIM (1 << 9) #define UART_IMSC_OEIM (1 << 10) #define UART_RIS 0x3c /* Raw interrupt status register */ #define UART_MIS 0x40 /* Masked interrupt status register */ #define UART_ICR 0x44 /* Interrupt clear register */ #define UART_DMACR 0x48 /* DMA control register */ #define UART_SPACE 0x100 struct pluart_softc { struct device sc_dev; bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; struct soft_intrhand *sc_si; void *sc_irq; struct tty *sc_tty; struct timeout sc_diag_tmo; struct timeout sc_dtr_tmo; int sc_overflows; int sc_floods; int sc_errors; int sc_halt; u_int16_t sc_ucr1; u_int16_t sc_ucr2; u_int16_t sc_ucr3; u_int16_t sc_ucr4; u_int8_t sc_hwflags; #define COM_HW_NOIEN 0x01 #define COM_HW_FIFO 0x02 #define COM_HW_SIR 0x20 #define COM_HW_CONSOLE 0x40 u_int8_t sc_swflags; #define COM_SW_SOFTCAR 0x01 #define COM_SW_CLOCAL 0x02 #define COM_SW_CRTSCTS 0x04 #define COM_SW_MDMBUF 0x08 #define COM_SW_PPS 0x10 int sc_fifolen; u_int8_t sc_initialize; u_int8_t sc_cua; u_int16_t *sc_ibuf, *sc_ibufp, *sc_ibufhigh, *sc_ibufend; #define UART_IBUFSIZE 128 #define UART_IHIGHWATER 100 u_int16_t sc_ibufs[2][UART_IBUFSIZE]; struct clk *sc_clk; }; int pluartprobe(struct device *parent, void *self, void *aux); void pluartattach(struct device *parent, struct device *self, void *aux); void pluartcnprobe(struct consdev *cp); void pluartcnprobe(struct consdev *cp); void pluartcninit(struct consdev *cp); int pluartcnattach(bus_space_tag_t iot, bus_addr_t iobase, int rate, tcflag_t cflag); int pluartcngetc(dev_t dev); void pluartcnputc(dev_t dev, int c); void pluartcnpollc(dev_t dev, int on); int pluart_param(struct tty *tp, struct termios *t); void pluart_start(struct tty *); void pluart_pwroff(struct pluart_softc *sc); void pluart_diag(void *arg); void pluart_raisedtr(void *arg); void pluart_softint(void *arg); struct pluart_softc *pluart_sc(dev_t dev); int pluart_intr(void *); /* XXX - we imitate 'com' serial ports and take over their entry points */ /* XXX: These belong elsewhere */ cdev_decl(pluart); struct cfdriver pluart_cd = { NULL, "pluart", DV_TTY }; struct cfattach pluart_ca = { sizeof(struct pluart_softc), pluartprobe, pluartattach }; bus_space_tag_t pluartconsiot; bus_space_handle_t pluartconsioh; bus_addr_t pluartconsaddr; tcflag_t pluartconscflag = TTYDEF_CFLAG; int pluartdefaultrate = B38400; void pluart_init_cons(void) { struct fdt_reg reg; void *node; if ((node = fdt_find_cons("arm,pl011")) == NULL) return; if (fdt_get_reg(node, 0, ®)) return; pluartcnattach(&arm64_bs_tag, reg.addr, B115200, TTYDEF_CFLAG); } int pluartprobe(struct device *parent, void *self, void *aux) { struct fdt_attach_args *faa = aux; return OF_is_compatible(faa->fa_node, "arm,pl011"); } struct cdevsw pluartdev = cdev_tty_init(3/*XXX NUART */ ,pluart); /* 8: serial port */ void pluartattach(struct device *parent, struct device *self, void *aux) { struct fdt_attach_args *faa = aux; struct pluart_softc *sc = (struct pluart_softc *) self; int maj; if (faa->fa_nreg < 1) { printf(": no register data\n"); return; } sc->sc_irq = arm_intr_establish_fdt(faa->fa_node, IPL_TTY, pluart_intr, sc, sc->sc_dev.dv_xname); sc->sc_iot = faa->fa_iot; if (bus_space_map(sc->sc_iot, faa->fa_reg[0].addr, faa->fa_reg[0].size, 0, &sc->sc_ioh)) panic("pluartattach: bus_space_map failed!"); if (stdout_node == faa->fa_node) { /* Locate the major number. */ for (maj = 0; maj < nchrdev; maj++) if (cdevsw[maj].d_open == pluartopen) break; cn_tab->cn_dev = makedev(maj, sc->sc_dev.dv_unit); printf(": console"); SET(sc->sc_hwflags, COM_HW_CONSOLE); } timeout_set(&sc->sc_diag_tmo, pluart_diag, sc); timeout_set(&sc->sc_dtr_tmo, pluart_raisedtr, sc); sc->sc_si = softintr_establish(IPL_TTY, pluart_softint, sc); if(sc->sc_si == NULL) panic("%s: can't establish soft interrupt.", sc->sc_dev.dv_xname); bus_space_write_4(sc->sc_iot, sc->sc_ioh, UART_IMSC, (UART_IMSC_RXIM | UART_IMSC_TXIM)); bus_space_write_4(sc->sc_iot, sc->sc_ioh, UART_ICR, 0x7ff); bus_space_write_4(sc->sc_iot, sc->sc_ioh, UART_LCR_H, bus_space_read_4(sc->sc_iot, sc->sc_ioh, UART_LCR_H) & ~UART_LCR_H_FEN); printf("\n"); } int pluart_intr(void *arg) { struct pluart_softc *sc = arg; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct tty *tp = sc->sc_tty; u_int16_t fr; u_int16_t *p; u_int16_t c; bus_space_write_4(iot, ioh, UART_ICR, -1); if (sc->sc_tty == NULL) return(0); fr = bus_space_read_4(iot, ioh, UART_FR); if (ISSET(fr, UART_FR_TXFE) && ISSET(tp->t_state, TS_BUSY)) { CLR(tp->t_state, TS_BUSY | TS_FLUSH); if (sc->sc_halt > 0) wakeup(&tp->t_outq); (*linesw[tp->t_line].l_start)(tp); } if(!ISSET(bus_space_read_4(iot, ioh, UART_FR), UART_FR_RXFF)) return 0; p = sc->sc_ibufp; while (ISSET(bus_space_read_4(iot, ioh, UART_FR), UART_FR_RXFF)) { c = bus_space_read_2(iot, ioh, UART_DR); if (c & UART_DR_BE) { #ifdef DDB if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { if (db_console) db_enter(); continue; } #endif c = 0; } if (p >= sc->sc_ibufend) { sc->sc_floods++; if (sc->sc_errors++ == 0) timeout_add(&sc->sc_diag_tmo, 60 * hz); } else { *p++ = c; if (p == sc->sc_ibufhigh && ISSET(tp->t_cflag, CRTSCTS)) { /* XXX */ //CLR(sc->sc_ucr3, IMXUART_CR3_DSR); //bus_space_write_4(iot, ioh, IMXUART_UCR3, // sc->sc_ucr3); } } /* XXX - msr stuff ? */ } sc->sc_ibufp = p; softintr_schedule(sc->sc_si); return 1; } int pluart_param(struct tty *tp, struct termios *t) { struct pluart_softc *sc = pluart_cd.cd_devs[DEVUNIT(tp->t_dev)]; //bus_space_tag_t iot = sc->sc_iot; //bus_space_handle_t ioh = sc->sc_ioh; int ospeed = t->c_ospeed; int error; tcflag_t oldcflag; if (t->c_ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed)) return EINVAL; switch (ISSET(t->c_cflag, CSIZE)) { case CS5: return EINVAL; case CS6: return EINVAL; case CS7: //CLR(sc->sc_ucr2, IMXUART_CR2_WS); break; case CS8: //SET(sc->sc_ucr2, IMXUART_CR2_WS); break; } // bus_space_write_4(iot, ioh, IMXUART_UCR2, sc->sc_ucr2); /* if (ISSET(t->c_cflag, PARENB)) { SET(sc->sc_ucr2, IMXUART_CR2_PREN); bus_space_write_4(iot, ioh, IMXUART_UCR2, sc->sc_ucr2); } */ /* STOPB - XXX */ if (ospeed == 0) { /* lower dtr */ } if (ospeed != 0) { while (ISSET(tp->t_state, TS_BUSY)) { ++sc->sc_halt; error = ttysleep(tp, &tp->t_outq, TTOPRI | PCATCH, "pluartprm", 0); --sc->sc_halt; if (error) { pluart_start(tp); return (error); } } /* set speed */ } /* setup fifo */ /* When not using CRTSCTS, RTS follows DTR. */ /* sc->sc_dtr = MCR_DTR; */ /* and copy to tty */ tp->t_ispeed = t->c_ispeed; tp->t_ospeed = t->c_ospeed; oldcflag = tp->t_cflag; tp->t_cflag = t->c_cflag; /* * If DCD is off and MDMBUF is changed, ask the tty layer if we should * stop the device. */ /* XXX */ pluart_start(tp); return 0; } void pluart_start(struct tty *tp) { struct pluart_softc *sc = pluart_cd.cd_devs[DEVUNIT(tp->t_dev)]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int s; s = spltty(); if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP)) goto out; if (tp->t_outq.c_cc <= tp->t_lowat) { if (ISSET(tp->t_state, TS_ASLEEP)) { CLR(tp->t_state, TS_ASLEEP); wakeup(&tp->t_outq); } if (tp->t_outq.c_cc == 0) goto out; selwakeup(&tp->t_wsel); } SET(tp->t_state, TS_BUSY); if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) { u_char buffer[64]; /* largest fifo */ int i, n; n = q_to_b(&tp->t_outq, buffer, min(sc->sc_fifolen, sizeof buffer)); for (i = 0; i < n; i++) { bus_space_write_4(iot, ioh, UART_DR, buffer[i]); } bzero(buffer, n); } else if (tp->t_outq.c_cc != 0) bus_space_write_4(iot, ioh, UART_DR, getc(&tp->t_outq)); out: splx(s); } void pluart_pwroff(struct pluart_softc *sc) { } void pluart_diag(void *arg) { struct pluart_softc *sc = arg; int overflows, floods; int s; s = spltty(); sc->sc_errors = 0; overflows = sc->sc_overflows; sc->sc_overflows = 0; floods = sc->sc_floods; sc->sc_floods = 0; splx(s); log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf overflow%s\n", sc->sc_dev.dv_xname, overflows, overflows == 1 ? "" : "s", floods, floods == 1 ? "" : "s"); } void pluart_raisedtr(void *arg) { //struct pluart_softc *sc = arg; //SET(sc->sc_ucr3, IMXUART_CR3_DSR); /* XXX */ //bus_space_write_4(sc->sc_iot, sc->sc_ioh, IMXUART_UCR3, sc->sc_ucr3); } void pluart_softint(void *arg) { struct pluart_softc *sc = arg; struct tty *tp; u_int16_t *ibufp; u_int16_t *ibufend; int c; int err; int s; if (sc == NULL || sc->sc_ibufp == sc->sc_ibuf) return; tp = sc->sc_tty; s = spltty(); ibufp = sc->sc_ibuf; ibufend = sc->sc_ibufp; if (ibufp == ibufend || tp == NULL || !ISSET(tp->t_state, TS_ISOPEN)) { splx(s); return; } sc->sc_ibufp = sc->sc_ibuf = (ibufp == sc->sc_ibufs[0]) ? sc->sc_ibufs[1] : sc->sc_ibufs[0]; sc->sc_ibufhigh = sc->sc_ibuf + UART_IHIGHWATER; sc->sc_ibufend = sc->sc_ibuf + UART_IBUFSIZE; #if 0 if (ISSET(tp->t_cflag, CRTSCTS) && !ISSET(sc->sc_ucr3, IMXUART_CR3_DSR)) { /* XXX */ SET(sc->sc_ucr3, IMXUART_CR3_DSR); bus_space_write_4(sc->sc_iot, sc->sc_ioh, IMXUART_UCR3, sc->sc_ucr3); } #endif splx(s); while (ibufp < ibufend) { c = *ibufp++; /* if (ISSET(c, IMXUART_RX_OVERRUN)) { sc->sc_overflows++; if (sc->sc_errors++ == 0) timeout_add(&sc->sc_diag_tmo, 60 * hz); } */ /* This is ugly, but fast. */ err = 0; /* if (ISSET(c, IMXUART_RX_PRERR)) err |= TTY_PE; if (ISSET(c, IMXUART_RX_FRMERR)) err |= TTY_FE; */ c = (c & 0xff) | err; (*linesw[tp->t_line].l_rint)(c, tp); } } int pluartopen(dev_t dev, int flag, int mode, struct proc *p) { int unit = DEVUNIT(dev); struct pluart_softc *sc; bus_space_tag_t iot; bus_space_handle_t ioh; struct tty *tp; int s; int error = 0; if (unit >= pluart_cd.cd_ndevs) return ENXIO; sc = pluart_cd.cd_devs[unit]; if (sc == NULL) return ENXIO; s = spltty(); if (sc->sc_tty == NULL) tp = sc->sc_tty = ttymalloc(0); else tp = sc->sc_tty; splx(s); tp->t_oproc = pluart_start; tp->t_param = pluart_param; tp->t_dev = dev; if (!ISSET(tp->t_state, TS_ISOPEN)) { SET(tp->t_state, TS_WOPEN); ttychars(tp); tp->t_iflag = TTYDEF_IFLAG; tp->t_oflag = TTYDEF_OFLAG; if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) tp->t_cflag = pluartconscflag; else tp->t_cflag = TTYDEF_CFLAG; if (ISSET(sc->sc_swflags, COM_SW_CLOCAL)) SET(tp->t_cflag, CLOCAL); if (ISSET(sc->sc_swflags, COM_SW_CRTSCTS)) SET(tp->t_cflag, CRTSCTS); if (ISSET(sc->sc_swflags, COM_SW_MDMBUF)) SET(tp->t_cflag, MDMBUF); tp->t_lflag = TTYDEF_LFLAG; tp->t_ispeed = tp->t_ospeed = pluartdefaultrate; s = spltty(); sc->sc_initialize = 1; pluart_param(tp, &tp->t_termios); ttsetwater(tp); sc->sc_ibufp = sc->sc_ibuf = sc->sc_ibufs[0]; sc->sc_ibufhigh = sc->sc_ibuf + UART_IHIGHWATER; sc->sc_ibufend = sc->sc_ibuf + UART_IBUFSIZE; iot = sc->sc_iot; ioh = sc->sc_ioh; #if 0 sc->sc_ucr1 = bus_space_read_4(iot, ioh, IMXUART_UCR1); sc->sc_ucr2 = bus_space_read_4(iot, ioh, IMXUART_UCR2); sc->sc_ucr3 = bus_space_read_4(iot, ioh, IMXUART_UCR3); sc->sc_ucr4 = bus_space_read_4(iot, ioh, IMXUART_UCR4); /* interrupt after one char on tx/rx */ /* reference frequency divider: 1 */ bus_space_write_4(iot, ioh, IMXUART_UFCR, 1 << IMXUART_FCR_TXTL_SH | 5 << IMXUART_FCR_RFDIV_SH | 1 << IMXUART_FCR_RXTL_SH); bus_space_write_4(iot, ioh, IMXUART_UBIR, (pluartdefaultrate / 100) - 1); /* formula: clk / (rfdiv * 1600) */ bus_space_write_4(iot, ioh, IMXUART_UBMR, (clk_get_rate(sc->sc_clk) * 1000) / 1600); SET(sc->sc_ucr1, IMXUART_CR1_EN|IMXUART_CR1_RRDYEN); SET(sc->sc_ucr2, IMXUART_CR2_TXEN|IMXUART_CR2_RXEN); bus_space_write_4(iot, ioh, IMXUART_UCR1, sc->sc_ucr1); bus_space_write_4(iot, ioh, IMXUART_UCR2, sc->sc_ucr2); /* sc->sc_mcr = MCR_DTR | MCR_RTS; XXX */ SET(sc->sc_ucr3, IMXUART_CR3_DSR); /* XXX */ bus_space_write_4(iot, ioh, IMXUART_UCR3, sc->sc_ucr3); #endif SET(tp->t_state, TS_CARR_ON); /* XXX */ } else if (ISSET(tp->t_state, TS_XCLUDE) && p->p_ucred->cr_uid != 0) return EBUSY; else s = spltty(); if (DEVCUA(dev)) { if (ISSET(tp->t_state, TS_ISOPEN)) { splx(s); return EBUSY; } sc->sc_cua = 1; } else { /* tty (not cua) device; wait for carrier if necessary */ if (ISSET(flag, O_NONBLOCK)) { if (sc->sc_cua) { /* Opening TTY non-blocking... but the CUA is busy */ splx(s); return EBUSY; } } else { while (sc->sc_cua || (!ISSET(tp->t_cflag, CLOCAL) && !ISSET(tp->t_state, TS_CARR_ON))) { SET(tp->t_state, TS_WOPEN); error = ttysleep(tp, &tp->t_rawq, TTIPRI | PCATCH, ttopen, 0); /* * If TS_WOPEN has been reset, that means the * cua device has been closed. We don't want * to fail in that case, * so just go around again. */ if (error && ISSET(tp->t_state, TS_WOPEN)) { CLR(tp->t_state, TS_WOPEN); if (!sc->sc_cua && !ISSET(tp->t_state, TS_ISOPEN)) pluart_pwroff(sc); splx(s); return error; } } } } splx(s); return (*linesw[tp->t_line].l_open)(dev,tp,p); } int pluartclose(dev_t dev, int flag, int mode, struct proc *p) { int unit = DEVUNIT(dev); struct pluart_softc *sc = pluart_cd.cd_devs[unit]; //bus_space_tag_t iot = sc->sc_iot; //bus_space_handle_t ioh = sc->sc_ioh; struct tty *tp = sc->sc_tty; int s; /* XXX This is for cons.c. */ if (!ISSET(tp->t_state, TS_ISOPEN)) return 0; (*linesw[tp->t_line].l_close)(tp, flag, p); s = spltty(); if (ISSET(tp->t_state, TS_WOPEN)) { /* tty device is waiting for carrier; drop dtr then re-raise */ //CLR(sc->sc_ucr3, IMXUART_CR3_DSR); //bus_space_write_4(iot, ioh, IMXUART_UCR3, sc->sc_ucr3); timeout_add(&sc->sc_dtr_tmo, hz * 2); } else { /* no one else waiting; turn off the uart */ pluart_pwroff(sc); } CLR(tp->t_state, TS_BUSY | TS_FLUSH); sc->sc_cua = 0; splx(s); ttyclose(tp); return 0; } int pluartread(dev_t dev, struct uio *uio, int flag) { struct tty *tty; tty = pluarttty(dev); if (tty == NULL) return ENODEV; return((*linesw[tty->t_line].l_read)(tty, uio, flag)); } int pluartwrite(dev_t dev, struct uio *uio, int flag) { struct tty *tty; tty = pluarttty(dev); if (tty == NULL) return ENODEV; return((*linesw[tty->t_line].l_write)(tty, uio, flag)); } int pluartioctl( dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p) { struct pluart_softc *sc; struct tty *tp; int error; sc = pluart_sc(dev); if (sc == NULL) return (ENODEV); tp = sc->sc_tty; if (tp == NULL) return (ENXIO); error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p); if (error >= 0) return (error); error = ttioctl(tp, cmd, data, flag, p); if (error >= 0) return (error); switch(cmd) { case TIOCSBRK: break; case TIOCCBRK: break; case TIOCSDTR: break; case TIOCCDTR: break; case TIOCMSET: break; case TIOCMBIS: break; case TIOCMBIC: break; case TIOCMGET: break; case TIOCGFLAGS: break; case TIOCSFLAGS: error = suser(p, 0); if (error != 0) return(EPERM); break; default: return (ENOTTY); } return 0; } int pluartstop(struct tty *tp, int flag) { return 0; } struct tty * pluarttty(dev_t dev) { int unit; struct pluart_softc *sc; unit = DEVUNIT(dev); if (unit >= pluart_cd.cd_ndevs) return NULL; sc = (struct pluart_softc *)pluart_cd.cd_devs[unit]; if (sc == NULL) return NULL; return sc->sc_tty; } struct pluart_softc * pluart_sc(dev_t dev) { int unit; struct pluart_softc *sc; unit = DEVUNIT(dev); if (unit >= pluart_cd.cd_ndevs) return NULL; sc = (struct pluart_softc *)pluart_cd.cd_devs[unit]; return sc; } /* serial console */ void pluartcnprobe(struct consdev *cp) { cp->cn_dev = makedev(8 /* XXX */, 0); cp->cn_pri = CN_MIDPRI; } void pluartcninit(struct consdev *cp) { } int pluartcnattach(bus_space_tag_t iot, bus_addr_t iobase, int rate, tcflag_t cflag) { static struct consdev pluartcons = { NULL, NULL, pluartcngetc, pluartcnputc, pluartcnpollc, NULL, NODEV, CN_MIDPRI }; if (bus_space_map(iot, iobase, UART_SPACE, 0, &pluartconsioh)) return ENOMEM; /* Disable FIFO. */ bus_space_write_4(iot, pluartconsioh, UART_LCR_H, bus_space_read_4(iot, pluartconsioh, UART_LCR_H) & ~UART_LCR_H_FEN); cn_tab = &pluartcons; cn_tab->cn_dev = makedev(8 /* XXX */, 0); cdevsw[8] = pluartdev; /* KLUDGE */ pluartconsiot = iot; pluartconsaddr = iobase; pluartconscflag = cflag; return 0; } int pluartcngetc(dev_t dev) { int c; int s; s = splhigh(); while((bus_space_read_4(pluartconsiot, pluartconsioh, UART_FR) & UART_FR_RXFF) == 0) ; c = bus_space_read_4(pluartconsiot, pluartconsioh, UART_DR); splx(s); return c; } void pluartcnputc(dev_t dev, int c) { int s; s = splhigh(); while((bus_space_read_4(pluartconsiot, pluartconsioh, UART_FR) & UART_FR_TXFE) == 0) ; bus_space_write_4(pluartconsiot, pluartconsioh, UART_DR, (uint8_t)c); splx(s); } void pluartcnpollc(dev_t dev, int on) { }