/* $NetBSD: zs.c,v 1.14 1996/01/23 09:35:15 leo Exp $ */ /* * Copyright (c) 1995 L. Weppelman (Atari modifications) * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This software was developed by the Computer Systems Engineering group * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and * contributed to Berkeley. * * * All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)zs.c 8.1 (Berkeley) 7/19/93 */ /* * Zilog Z8530 (ZSCC) driver. * * Runs two tty ports (modem2 and serial2) on zs0. * * This driver knows far too much about chip to usage mappings. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zs.h" #if NZS > 1 #error "This driver supports only 1 85C30!" #endif #if NZS > 0 #define PCLK (8053976) /* PCLK pin input clock rate */ #define splzs spl5 /* * Software state per found chip. */ struct zs_softc { struct device zi_dev; /* base device */ volatile struct zsdevice *zi_zs; /* chip registers */ struct zs_chanstate zi_cs[2]; /* chan A and B software state */ }; static u_char cb_scheduled = 0; /* Already asked for callback? */ /* * Define the registers for a closed port */ static u_char zs_init_regs[16] = { /* 0 */ 0, /* 1 */ 0, /* 2 */ 0x60, /* 3 */ 0, /* 4 */ 0, /* 5 */ 0, /* 6 */ 0, /* 7 */ 0, /* 8 */ 0, /* 9 */ ZSWR9_MASTER_IE | ZSWR9_VECTOR_INCL_STAT, /* 10 */ ZSWR10_NRZ, /* 11 */ ZSWR11_TXCLK_BAUD | ZSWR11_RXCLK_BAUD, /* 12 */ 0, /* 13 */ 0, /* 14 */ ZSWR14_BAUD_FROM_PCLK | ZSWR14_BAUD_ENA, /* 15 */ 0 }; /* * Define the machine dependant clock frequencies * If BRgen feeds sender/receiver we always use a * divisor 16, therefor the division by 16 can as * well be done here. */ static u_long zs_freqs_tt[] = { /* * Atari TT, RTxCB is generated by TT-MFP timer C, * which is set to 307.2KHz during initialisation * and never changed afterwards. */ PCLK/16, /* BRgen, PCLK, divisor 16 */ 229500, /* BRgen, RTxCA, divisor 16 */ 3672000, /* RTxCA, from PCLK4 */ 0, /* TRxCA, external */ PCLK/16, /* BRgen, PCLK, divisor 16 */ 19200, /* BRgen, RTxCB, divisor 16 */ 307200, /* RTxCB, from TT-MFP TCO */ 2457600 /* TRxCB, from BCLK */ }; static u_long zs_freqs_falcon[] = { /* * Atari Falcon, XXX no specs available, this might be wrong */ PCLK/16, /* BRgen, PCLK, divisor 16 */ 229500, /* BRgen, RTxCA, divisor 16 */ 3672000, /* RTxCA, ??? */ 0, /* TRxCA, external */ PCLK/16, /* BRgen, PCLK, divisor 16 */ 229500, /* BRgen, RTxCB, divisor 16 */ 3672000, /* RTxCB, ??? */ 2457600 /* TRxCB, ??? */ }; static u_long zs_freqs_generic[] = { /* * other machines, assume only PCLK is available */ PCLK/16, /* BRgen, PCLK, divisor 16 */ 0, /* BRgen, RTxCA, divisor 16 */ 0, /* RTxCA, unknown */ 0, /* TRxCA, unknown */ PCLK/16, /* BRgen, PCLK, divisor 16 */ 0, /* BRgen, RTxCB, divisor 16 */ 0, /* RTxCB, unknown */ 0 /* TRxCB, unknown */ }; static u_long *zs_frequencies; /* Definition of the driver for autoconfig. */ static int zsmatch __P((struct device *, struct cfdata *, void *)); static void zsattach __P((struct device *, struct device *, void *)); struct cfdriver zscd = { NULL, "zs", (cfmatch_t)zsmatch, zsattach, DV_TTY, sizeof(struct zs_softc), NULL, 0 }; /* Interrupt handlers. */ int zshard __P((long)); static int zssoft __P((long)); static int zsrint __P((struct zs_chanstate *, volatile struct zschan *)); static int zsxint __P((struct zs_chanstate *, volatile struct zschan *)); static int zssint __P((struct zs_chanstate *, volatile struct zschan *)); static struct zs_chanstate *zslist; /* Routines called from other code. */ static void zsstart __P((struct tty *)); void zsstop __P((struct tty *, int)); static int zsparam __P((struct tty *, struct termios *)); static int zsbaudrate __P((int, int, int *, int *, int *, int *)); /* Routines purely local to this driver. */ static void zs_reset __P((volatile struct zschan *, int, int)); static int zs_modem __P((struct zs_chanstate *, int, int)); static void zs_loadchannelregs __P((volatile struct zschan *, u_char *)); static int zsshortcuts; /* number of "shortcut" software interrupts */ static int zsmatch(pdp, cfp, auxp) struct device *pdp; struct cfdata *cfp; void *auxp; { if(strcmp("zs", auxp) || cfp->cf_unit != 0) return(0); return(1); } /* * Attach a found zs. */ static void zsattach(parent, dev, aux) struct device *parent; struct device *dev; void *aux; { register struct zs_softc *zi; register struct zs_chanstate *cs; register volatile struct zsdevice *addr; register struct tty *tp; char tmp; addr = (struct zsdevice *)AD_SCC; zi = (struct zs_softc *)dev; zi->zi_zs = addr; cs = zi->zi_cs; /* * Get the command register into a known state. */ tmp = addr->zs_chan[ZS_CHAN_A].zc_csr; tmp = addr->zs_chan[ZS_CHAN_A].zc_csr; tmp = addr->zs_chan[ZS_CHAN_B].zc_csr; tmp = addr->zs_chan[ZS_CHAN_B].zc_csr; /* * Do a hardware reset. */ ZS_WRITE(&addr->zs_chan[ZS_CHAN_A], 9, ZSWR9_HARD_RESET); delay(50000); /*enough ? */ ZS_WRITE(&addr->zs_chan[ZS_CHAN_A], 9, 0); /* * Initialize both channels */ zs_loadchannelregs(&addr->zs_chan[ZS_CHAN_A], zs_init_regs); zs_loadchannelregs(&addr->zs_chan[ZS_CHAN_B], zs_init_regs); if(machineid & ATARI_TT) { /* * ininitialise TT-MFP timer C: 307200Hz * timer C and D share one control register: * bits 0-2 control timer D * bits 4-6 control timer C */ int cr = MFP2->mf_tcdcr & 7; MFP2->mf_tcdcr = cr; /* stop timer C */ MFP2->mf_tcdr = 1; /* counter 1 */ cr |= T_Q004 << 4; /* divisor 4 */ MFP2->mf_tcdcr = cr; /* start timer C */ /* * enable scc related interrupts */ SCU->sys_mask |= SCU_SCC; zs_frequencies = zs_freqs_tt; } else if (machineid & ATARI_FALCON) { zs_frequencies = zs_freqs_falcon; } else { zs_frequencies = zs_freqs_generic; } /* link into interrupt list with order (A,B) (B=A+1) */ cs[0].cs_next = &cs[1]; cs[1].cs_next = zslist; zslist = cs; cs->cs_unit = 0; cs->cs_zc = &addr->zs_chan[ZS_CHAN_A]; cs++; cs->cs_unit = 1; cs->cs_zc = &addr->zs_chan[ZS_CHAN_B]; printf(": serial2 on channel a and modem2 on channel b\n"); } /* * Open a zs serial port. */ int zsopen(dev, flags, mode, p) dev_t dev; int flags; int mode; struct proc *p; { register struct tty *tp; register struct zs_chanstate *cs; struct zs_softc *zi; int unit = ZS_UNIT(dev); int zs = unit >> 1; int error, s; if(zs >= zscd.cd_ndevs || (zi = zscd.cd_devs[zs]) == NULL) return (ENXIO); cs = &zi->zi_cs[unit & 1]; /* * When port A (ser02) is selected on the TT, make sure * the port is enabled. */ if((machineid & ATARI_TT) && !(unit & 1)) { SOUND->sd_selr = YM_IOA; SOUND->sd_wdat = SOUND->sd_rdat | PA_SER2; } if (cs->cs_rbuf == NULL) { cs->cs_rbuf = malloc(ZLRB_RING_SIZE * sizeof(int), M_DEVBUF, M_WAITOK); } tp = cs->cs_ttyp; if(tp == NULL) { cs->cs_ttyp = tp = ttymalloc(); tp->t_dev = dev; tp->t_oproc = zsstart; tp->t_param = zsparam; } s = spltty(); if((tp->t_state & TS_ISOPEN) == 0) { ttychars(tp); if(tp->t_ispeed == 0) { tp->t_iflag = TTYDEF_IFLAG; tp->t_oflag = TTYDEF_OFLAG; tp->t_cflag = TTYDEF_CFLAG; tp->t_lflag = TTYDEF_LFLAG; tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED; } (void)zsparam(tp, &tp->t_termios); ttsetwater(tp); } else if(tp->t_state & TS_XCLUDE && p->p_ucred->cr_uid != 0) { splx(s); return (EBUSY); } error = 0; for(;;) { /* loop, turning on the device, until carrier present */ zs_modem(cs, ZSWR5_RTS|ZSWR5_DTR, DMSET); /* May never get a status intr. if DCD already on. -gwr */ if(cs->cs_zc->zc_csr & ZSRR0_DCD) tp->t_state |= TS_CARR_ON; if(cs->cs_softcar) tp->t_state |= TS_CARR_ON; if(flags & O_NONBLOCK || tp->t_cflag & CLOCAL || tp->t_state & TS_CARR_ON) break; tp->t_state |= TS_WOPEN; if(error = ttysleep(tp, (caddr_t)&tp->t_rawq, TTIPRI | PCATCH, ttopen, 0)) { if(!(tp->t_state & TS_ISOPEN)) { zs_modem(cs, 0, DMSET); tp->t_state &= ~TS_WOPEN; ttwakeup(tp); } splx(s); return error; } } splx(s); if(error == 0) error = linesw[tp->t_line].l_open(dev, tp); if(error) zs_modem(cs, 0, DMSET); return(error); } /* * Close a zs serial port. */ int zsclose(dev, flags, mode, p) dev_t dev; int flags; int mode; struct proc *p; { register struct zs_chanstate *cs; register struct tty *tp; struct zs_softc *zi; int unit = ZS_UNIT(dev); int s; zi = zscd.cd_devs[unit >> 1]; cs = &zi->zi_cs[unit & 1]; tp = cs->cs_ttyp; linesw[tp->t_line].l_close(tp, flags); if(tp->t_cflag & HUPCL || tp->t_state & TS_WOPEN || (tp->t_state & TS_ISOPEN) == 0) { zs_modem(cs, 0, DMSET); /* hold low for 1 second */ (void)tsleep((caddr_t)cs, TTIPRI, ttclos, hz); } if(cs->cs_creg[5] & ZSWR5_BREAK) { s = splzs(); cs->cs_preg[5] &= ~ZSWR5_BREAK; cs->cs_creg[5] &= ~ZSWR5_BREAK; ZS_WRITE(cs->cs_zc, 5, cs->cs_creg[5]); splx(s); } ttyclose(tp); /* * Drop all lines and cancel interrupts */ s = splzs(); zs_loadchannelregs(cs->cs_zc, zs_init_regs); splx(s); return (0); } /* * Read/write zs serial port. */ int zsread(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { register struct zs_chanstate *cs; register struct zs_softc *zi; register struct tty *tp; int unit; unit = ZS_UNIT(dev); zi = zscd.cd_devs[unit >> 1]; cs = &zi->zi_cs[unit & 1]; tp = cs->cs_ttyp; return(linesw[tp->t_line].l_read(tp, uio, flags)); } int zswrite(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { register struct zs_chanstate *cs; register struct zs_softc *zi; register struct tty *tp; int unit; unit = ZS_UNIT(dev); zi = zscd.cd_devs[unit >> 1]; cs = &zi->zi_cs[unit & 1]; tp = cs->cs_ttyp; return(linesw[tp->t_line].l_write(tp, uio, flags)); } struct tty * zstty(dev) dev_t dev; { register struct zs_chanstate *cs; register struct zs_softc *zi; int unit; unit = ZS_UNIT(dev); zi = zscd.cd_devs[unit >> 1]; cs = &zi->zi_cs[unit & 1]; return(cs->cs_ttyp); } /* * ZS hardware interrupt. Scan all ZS channels. NB: we know here that * channels are kept in (A,B) pairs. * * Do just a little, then get out; set a software interrupt if more * work is needed. * * We deliberately ignore the vectoring Zilog gives us, and match up * only the number of `reset interrupt under service' operations, not * the order. */ int zshard(sr) long sr; { register struct zs_chanstate *a; #define b (a + 1) register volatile struct zschan *zc; register int rr3, intflags = 0, v, i; do { intflags &= ~4; for(a = zslist; a != NULL; a = b->cs_next) { rr3 = ZS_READ(a->cs_zc, 3); if(rr3 & (ZSRR3_IP_A_RX|ZSRR3_IP_A_TX|ZSRR3_IP_A_STAT)) { intflags |= 4|2; zc = a->cs_zc; i = a->cs_rbput; if(rr3 & ZSRR3_IP_A_RX && (v = zsrint(a, zc)) != 0) { a->cs_rbuf[i++ & ZLRB_RING_MASK] = v; intflags |= 1; } if(rr3 & ZSRR3_IP_A_TX && (v = zsxint(a, zc)) != 0) { a->cs_rbuf[i++ & ZLRB_RING_MASK] = v; intflags |= 1; } if(rr3 & ZSRR3_IP_A_STAT && (v = zssint(a, zc)) != 0) { a->cs_rbuf[i++ & ZLRB_RING_MASK] = v; intflags |= 1; } a->cs_rbput = i; } if(rr3 & (ZSRR3_IP_B_RX|ZSRR3_IP_B_TX|ZSRR3_IP_B_STAT)) { intflags |= 4|2; zc = b->cs_zc; i = b->cs_rbput; if(rr3 & ZSRR3_IP_B_RX && (v = zsrint(b, zc)) != 0) { b->cs_rbuf[i++ & ZLRB_RING_MASK] = v; intflags |= 1; } if(rr3 & ZSRR3_IP_B_TX && (v = zsxint(b, zc)) != 0) { b->cs_rbuf[i++ & ZLRB_RING_MASK] = v; intflags |= 1; } if(rr3 & ZSRR3_IP_B_STAT && (v = zssint(b, zc)) != 0) { b->cs_rbuf[i++ & ZLRB_RING_MASK] = v; intflags |= 1; } b->cs_rbput = i; } } } while(intflags & 4); #undef b if(intflags & 1) { if(BASEPRI(sr)) { spl1(); zsshortcuts++; return(zssoft(sr)); } else if(!cb_scheduled) { cb_scheduled++; add_sicallback(zssoft, 0, 0); } } return(intflags & 2); } static int zsrint(cs, zc) register struct zs_chanstate *cs; register volatile struct zschan *zc; { register int c; /* * First read the status, because read of the received char * destroy the status of this char. */ c = ZS_READ(zc, 1); c |= (zc->zc_data << 8); /* clear receive error & interrupt condition */ zc->zc_csr = ZSWR0_RESET_ERRORS; zc->zc_csr = ZSWR0_CLR_INTR; return(ZRING_MAKE(ZRING_RINT, c)); } static int zsxint(cs, zc) register struct zs_chanstate *cs; register volatile struct zschan *zc; { register int i = cs->cs_tbc; if(i == 0) { zc->zc_csr = ZSWR0_RESET_TXINT; zc->zc_csr = ZSWR0_CLR_INTR; return(ZRING_MAKE(ZRING_XINT, 0)); } cs->cs_tbc = i - 1; zc->zc_data = *cs->cs_tba++; zc->zc_csr = ZSWR0_CLR_INTR; return (0); } static int zssint(cs, zc) register struct zs_chanstate *cs; register volatile struct zschan *zc; { register int rr0; rr0 = zc->zc_csr; zc->zc_csr = ZSWR0_RESET_STATUS; zc->zc_csr = ZSWR0_CLR_INTR; /* * The chip's hardware flow control is, as noted in zsreg.h, * busted---if the DCD line goes low the chip shuts off the * receiver (!). If we want hardware CTS flow control but do * not have it, and carrier is now on, turn HFC on; if we have * HFC now but carrier has gone low, turn it off. */ if(rr0 & ZSRR0_DCD) { if(cs->cs_ttyp->t_cflag & CCTS_OFLOW && (cs->cs_creg[3] & ZSWR3_HFC) == 0) { cs->cs_creg[3] |= ZSWR3_HFC; ZS_WRITE(zc, 3, cs->cs_creg[3]); } } else { if (cs->cs_creg[3] & ZSWR3_HFC) { cs->cs_creg[3] &= ~ZSWR3_HFC; ZS_WRITE(zc, 3, cs->cs_creg[3]); } } return(ZRING_MAKE(ZRING_SINT, rr0)); } /* * Print out a ring or fifo overrun error message. */ static void zsoverrun(unit, ptime, what) int unit; long *ptime; char *what; { if(*ptime != time.tv_sec) { *ptime = time.tv_sec; log(LOG_WARNING, "zs%d%c: %s overrun\n", unit >> 1, (unit & 1) + 'a', what); } } /* * ZS software interrupt. Scan all channels for deferred interrupts. */ int zssoft(sr) long sr; { register struct zs_chanstate *cs; register volatile struct zschan *zc; register struct linesw *line; register struct tty *tp; register int get, n, c, cc, unit, s; int retval = 0; cb_scheduled = 0; s = spltty(); for(cs = zslist; cs != NULL; cs = cs->cs_next) { get = cs->cs_rbget; again: n = cs->cs_rbput; /* atomic */ if(get == n) /* nothing more on this line */ continue; retval = 1; unit = cs->cs_unit; /* set up to handle interrupts */ zc = cs->cs_zc; tp = cs->cs_ttyp; line = &linesw[tp->t_line]; /* * Compute the number of interrupts in the receive ring. * If the count is overlarge, we lost some events, and * must advance to the first valid one. It may get * overwritten if more data are arriving, but this is * too expensive to check and gains nothing (we already * lost out; all we can do at this point is trade one * kind of loss for another). */ n -= get; if(n > ZLRB_RING_SIZE) { zsoverrun(unit, &cs->cs_rotime, "ring"); get += n - ZLRB_RING_SIZE; n = ZLRB_RING_SIZE; } while(--n >= 0) { /* race to keep ahead of incoming interrupts */ c = cs->cs_rbuf[get++ & ZLRB_RING_MASK]; switch (ZRING_TYPE(c)) { case ZRING_RINT: c = ZRING_VALUE(c); if(c & ZSRR1_DO) zsoverrun(unit, &cs->cs_fotime, "fifo"); cc = c >> 8; if(c & ZSRR1_FE) cc |= TTY_FE; if(c & ZSRR1_PE) cc |= TTY_PE; line->l_rint(cc, tp); break; case ZRING_XINT: /* * Transmit done: change registers and resume, * or clear BUSY. */ if(cs->cs_heldchange) { int sps; sps = splzs(); c = zc->zc_csr; if((c & ZSRR0_DCD) == 0) cs->cs_preg[3] &= ~ZSWR3_HFC; bcopy((caddr_t)cs->cs_preg, (caddr_t)cs->cs_creg, 16); zs_loadchannelregs(zc, cs->cs_creg); splx(sps); cs->cs_heldchange = 0; if(cs->cs_heldtbc && (tp->t_state & TS_TTSTOP) == 0) { cs->cs_tbc = cs->cs_heldtbc - 1; zc->zc_data = *cs->cs_tba++; goto again; } } tp->t_state &= ~TS_BUSY; if(tp->t_state & TS_FLUSH) tp->t_state &= ~TS_FLUSH; else ndflush(&tp->t_outq,cs->cs_tba - (caddr_t)tp->t_outq.c_cf); line->l_start(tp); break; case ZRING_SINT: /* * Status line change. HFC bit is run in * hardware interrupt, to avoid locking * at splzs here. */ c = ZRING_VALUE(c); if((c ^ cs->cs_rr0) & ZSRR0_DCD) { cc = (c & ZSRR0_DCD) != 0; if(line->l_modem(tp, cc) == 0) zs_modem(cs, ZSWR5_RTS|ZSWR5_DTR, cc ? DMBIS : DMBIC); } cs->cs_rr0 = c; break; default: log(LOG_ERR, "zs%d%c: bad ZRING_TYPE (%x)\n", unit >> 1, (unit & 1) + 'a', c); break; } } cs->cs_rbget = get; goto again; } splx(s); return (retval); } int zsioctl(dev, cmd, data, flag, p) dev_t dev; u_long cmd; caddr_t data; int flag; struct proc *p; { int unit = ZS_UNIT(dev); struct zs_softc *zi = zscd.cd_devs[unit >> 1]; register struct tty *tp = zi->zi_cs[unit & 1].cs_ttyp; register int error, s; register struct zs_chanstate *cs = &zi->zi_cs[unit & 1]; error = linesw[tp->t_line].l_ioctl(tp, cmd, data, flag, p); if(error >= 0) return(error); error = ttioctl(tp, cmd, data, flag, p); if(error >= 0) return (error); switch (cmd) { case TIOCSBRK: s = splzs(); cs->cs_preg[5] |= ZSWR5_BREAK; cs->cs_creg[5] |= ZSWR5_BREAK; ZS_WRITE(cs->cs_zc, 5, cs->cs_creg[5]); splx(s); break; case TIOCCBRK: s = splzs(); cs->cs_preg[5] &= ~ZSWR5_BREAK; cs->cs_creg[5] &= ~ZSWR5_BREAK; ZS_WRITE(cs->cs_zc, 5, cs->cs_creg[5]); splx(s); break; case TIOCGFLAGS: { int bits = 0; if(cs->cs_softcar) bits |= TIOCFLAG_SOFTCAR; if(cs->cs_creg[15] & ZSWR15_DCD_IE) bits |= TIOCFLAG_CLOCAL; if(cs->cs_creg[3] & ZSWR3_HFC) bits |= TIOCFLAG_CRTSCTS; *(int *)data = bits; break; } case TIOCSFLAGS: { int userbits, driverbits = 0; error = suser(p->p_ucred, &p->p_acflag); if(error != 0) return (EPERM); userbits = *(int *)data; /* * can have `local' or `softcar', and `rtscts' or `mdmbuf' # defaulting to software flow control. */ if(userbits & TIOCFLAG_SOFTCAR && userbits & TIOCFLAG_CLOCAL) return(EINVAL); if(userbits & TIOCFLAG_MDMBUF) /* don't support this (yet?) */ return(ENODEV); s = splzs(); if((userbits & TIOCFLAG_SOFTCAR)) { cs->cs_softcar = 1; /* turn on softcar */ cs->cs_preg[15] &= ~ZSWR15_DCD_IE; /* turn off dcd */ cs->cs_creg[15] &= ~ZSWR15_DCD_IE; ZS_WRITE(cs->cs_zc, 15, cs->cs_creg[15]); } else if(userbits & TIOCFLAG_CLOCAL) { cs->cs_softcar = 0; /* turn off softcar */ cs->cs_preg[15] |= ZSWR15_DCD_IE; /* turn on dcd */ cs->cs_creg[15] |= ZSWR15_DCD_IE; ZS_WRITE(cs->cs_zc, 15, cs->cs_creg[15]); tp->t_termios.c_cflag |= CLOCAL; } if(userbits & TIOCFLAG_CRTSCTS) { cs->cs_preg[15] |= ZSWR15_CTS_IE; cs->cs_creg[15] |= ZSWR15_CTS_IE; ZS_WRITE(cs->cs_zc, 15, cs->cs_creg[15]); cs->cs_preg[3] |= ZSWR3_HFC; cs->cs_creg[3] |= ZSWR3_HFC; ZS_WRITE(cs->cs_zc, 3, cs->cs_creg[3]); tp->t_termios.c_cflag |= CRTSCTS; } else { /* no mdmbuf, so we must want software flow control */ cs->cs_preg[15] &= ~ZSWR15_CTS_IE; cs->cs_creg[15] &= ~ZSWR15_CTS_IE; ZS_WRITE(cs->cs_zc, 15, cs->cs_creg[15]); cs->cs_preg[3] &= ~ZSWR3_HFC; cs->cs_creg[3] &= ~ZSWR3_HFC; ZS_WRITE(cs->cs_zc, 3, cs->cs_creg[3]); tp->t_termios.c_cflag &= ~CRTSCTS; } splx(s); break; } case TIOCSDTR: zs_modem(cs, ZSWR5_DTR, DMBIS); break; case TIOCCDTR: zs_modem(cs, ZSWR5_DTR, DMBIC); break; case TIOCMGET: zs_modem(cs, 0, DMGET); break; case TIOCMSET: case TIOCMBIS: case TIOCMBIC: default: return (ENOTTY); } return (0); } /* * Start or restart transmission. */ static void zsstart(tp) register struct tty *tp; { register struct zs_chanstate *cs; register int s, nch; int unit = ZS_UNIT(tp->t_dev); struct zs_softc *zi = zscd.cd_devs[unit >> 1]; cs = &zi->zi_cs[unit & 1]; s = spltty(); /* * If currently active or delaying, no need to do anything. */ if(tp->t_state & (TS_TIMEOUT | TS_BUSY | TS_TTSTOP)) goto out; /* * If there are sleepers, and output has drained below low * water mark, awaken. */ if(tp->t_outq.c_cc <= tp->t_lowat) { if(tp->t_state & TS_ASLEEP) { tp->t_state &= ~TS_ASLEEP; wakeup((caddr_t)&tp->t_outq); } selwakeup(&tp->t_wsel); } nch = ndqb(&tp->t_outq, 0); /* XXX */ if(nch) { register char *p = tp->t_outq.c_cf; /* mark busy, enable tx done interrupts, & send first byte */ tp->t_state |= TS_BUSY; (void) splzs(); cs->cs_preg[1] |= ZSWR1_TIE; cs->cs_creg[1] |= ZSWR1_TIE; ZS_WRITE(cs->cs_zc, 1, cs->cs_creg[1]); cs->cs_zc->zc_data = *p; cs->cs_tba = p + 1; cs->cs_tbc = nch - 1; } else { /* * Nothing to send, turn off transmit done interrupts. * This is useful if something is doing polled output. */ (void) splzs(); cs->cs_preg[1] &= ~ZSWR1_TIE; cs->cs_creg[1] &= ~ZSWR1_TIE; ZS_WRITE(cs->cs_zc, 1, cs->cs_creg[1]); } out: splx(s); } /* * Stop output, e.g., for ^S or output flush. */ void zsstop(tp, flag) register struct tty *tp; int flag; { register struct zs_chanstate *cs; register int s, unit = ZS_UNIT(tp->t_dev); struct zs_softc *zi = zscd.cd_devs[unit >> 1]; cs = &zi->zi_cs[unit & 1]; s = splzs(); if(tp->t_state & TS_BUSY) { /* * Device is transmitting; must stop it. */ cs->cs_tbc = 0; if ((tp->t_state & TS_TTSTOP) == 0) tp->t_state |= TS_FLUSH; } splx(s); } /* * Set ZS tty parameters from termios. * * This routine makes use of the fact that only registers * 1, 3, 4, 5, 9, 10, 11, 12, 13, 14, and 15 are written. */ static int zsparam(tp, t) register struct tty *tp; register struct termios *t; { int unit = ZS_UNIT(tp->t_dev); struct zs_softc *zi = zscd.cd_devs[unit >> 1]; register struct zs_chanstate *cs = &zi->zi_cs[unit & 1]; int cdiv, clkm, brgm, tcon; register int tmp, tmp5, cflag, s; tmp = t->c_ospeed; tmp5 = t->c_ispeed; if(tmp < 0 || (tmp5 && tmp5 != tmp)) return(EINVAL); if(tmp == 0) { /* stty 0 => drop DTR and RTS */ zs_modem(cs, 0, DMSET); return(0); } tmp = zsbaudrate(unit, tmp, &cdiv, &clkm, &brgm, &tcon); if (tmp < 0) return(EINVAL); tp->t_ispeed = tp->t_ospeed = tmp; cflag = tp->t_cflag = t->c_cflag; if (cflag & CSTOPB) cdiv |= ZSWR4_TWOSB; else cdiv |= ZSWR4_ONESB; if (!(cflag & PARODD)) cdiv |= ZSWR4_EVENP; if (cflag & PARENB) cdiv |= ZSWR4_PARENB; switch(cflag & CSIZE) { case CS5: tmp = ZSWR3_RX_5; tmp5 = ZSWR5_TX_5; break; case CS6: tmp = ZSWR3_RX_6; tmp5 = ZSWR5_TX_6; break; case CS7: tmp = ZSWR3_RX_7; tmp5 = ZSWR5_TX_7; break; case CS8: default: tmp = ZSWR3_RX_8; tmp5 = ZSWR5_TX_8; break; } tmp |= ZSWR3_RX_ENABLE; tmp5 |= ZSWR5_TX_ENABLE | ZSWR5_DTR | ZSWR5_RTS; /* * Block interrupts so that state will not * be altered until we are done setting it up. */ s = splzs(); cs->cs_preg[4] = cdiv; cs->cs_preg[11] = clkm; cs->cs_preg[12] = tcon; cs->cs_preg[13] = tcon >> 8; cs->cs_preg[14] = brgm; cs->cs_preg[1] = ZSWR1_RIE | ZSWR1_TIE | ZSWR1_SIE; cs->cs_preg[9] = ZSWR9_MASTER_IE | ZSWR9_VECTOR_INCL_STAT; cs->cs_preg[10] = ZSWR10_NRZ; cs->cs_preg[15] = ZSWR15_BREAK_IE | ZSWR15_DCD_IE; /* * Output hardware flow control on the chip is horrendous: if * carrier detect drops, the receiver is disabled. Hence we * can only do this when the carrier is on. */ if(cflag & CCTS_OFLOW && cs->cs_zc->zc_csr & ZSRR0_DCD) tmp |= ZSWR3_HFC; cs->cs_preg[3] = tmp; cs->cs_preg[5] = tmp5; /* * If nothing is being transmitted, set up new current values, * else mark them as pending. */ if(cs->cs_heldchange == 0) { if (cs->cs_ttyp->t_state & TS_BUSY) { cs->cs_heldtbc = cs->cs_tbc; cs->cs_tbc = 0; cs->cs_heldchange = 1; } else { bcopy((caddr_t)cs->cs_preg, (caddr_t)cs->cs_creg, 16); zs_loadchannelregs(cs->cs_zc, cs->cs_creg); } } splx(s); return (0); } /* * search for the best matching baudrate */ static int zsbaudrate(unit, wanted, divisor, clockmode, brgenmode, timeconst) int unit, wanted, *divisor, *clockmode, *brgenmode, *timeconst; { int bestdiff, bestbps, source; unit = (unit & 1) << 2; for (source = 0; source < 4; ++source) { long freq = zs_frequencies[unit + source]; int diff, bps, div, clkm, brgm, tcon; switch (source) { case 0: /* BRgen, PCLK */ brgm = ZSWR14_BAUD_ENA|ZSWR14_BAUD_FROM_PCLK; break; case 1: /* BRgen, RTxC */ brgm = ZSWR14_BAUD_ENA; break; case 2: /* RTxC */ clkm = ZSWR11_RXCLK_RTXC|ZSWR11_TXCLK_RTXC; break; case 3: /* TRxC */ clkm = ZSWR11_RXCLK_TRXC|ZSWR11_TXCLK_TRXC; break; } switch (source) { case 0: case 1: div = ZSWR4_CLK_X16; clkm = ZSWR11_RXCLK_BAUD|ZSWR11_TXCLK_BAUD; tcon = BPS_TO_TCONST(freq, wanted); if (tcon < 0) tcon = 0; bps = TCONST_TO_BPS(freq, tcon); break; case 2: case 3: { int b1 = freq / 16, d1 = abs(b1 - wanted); int b2 = freq / 32, d2 = abs(b2 - wanted); int b3 = freq / 64, d3 = abs(b3 - wanted); if (d1 < d2 && d1 < d3) { div = ZSWR4_CLK_X16; bps = b1; } else if (d2 < d3 && d2 < d1) { div = ZSWR4_CLK_X32; bps = b2; } else { div = ZSWR4_CLK_X64; bps = b3; } brgm = tcon = 0; break; } } diff = abs(bps - wanted); if (!source || diff < bestdiff) { *divisor = div; *clockmode = clkm; *brgenmode = brgm; *timeconst = tcon; bestbps = bps; bestdiff = diff; if (diff == 0) break; } } /* Allow deviations upto 5% */ if (20 * bestdiff > wanted) return -1; return bestbps; } /* * Raise or lower modem control (DTR/RTS) signals. If a character is * in transmission, the change is deferred. */ static int zs_modem(cs, bits, how) struct zs_chanstate *cs; int bits, how; { int s, mbits; bits &= ZSWR5_DTR | ZSWR5_RTS; s = splzs(); mbits = cs->cs_preg[5] & (ZSWR5_DTR | ZSWR5_RTS); switch(how) { case DMSET: mbits = bits; break; case DMBIS: mbits |= bits; break; case DMBIC: mbits &= ~bits; break; case DMGET: splx(s); return(mbits); } cs->cs_preg[5] = (cs->cs_preg[5] & ~(ZSWR5_DTR | ZSWR5_RTS)) | mbits; if(cs->cs_heldchange == 0) { if(cs->cs_ttyp->t_state & TS_BUSY) { cs->cs_heldtbc = cs->cs_tbc; cs->cs_tbc = 0; cs->cs_heldchange = 1; } else { ZS_WRITE(cs->cs_zc, 5, cs->cs_creg[5]); } } splx(s); return(0); } /* * Write the given register set to the given zs channel in the proper order. * The channel must not be transmitting at the time. The receiver will * be disabled for the time it takes to write all the registers. */ static void zs_loadchannelregs(zc, reg) volatile struct zschan *zc; u_char *reg; { int i; zc->zc_csr = ZSM_RESET_ERR; /* reset error condition */ i = zc->zc_data; /* drain fifo */ i = zc->zc_data; i = zc->zc_data; ZS_WRITE(zc, 4, reg[4]); ZS_WRITE(zc, 10, reg[10]); ZS_WRITE(zc, 3, reg[3] & ~ZSWR3_RX_ENABLE); ZS_WRITE(zc, 5, reg[5] & ~ZSWR5_TX_ENABLE); ZS_WRITE(zc, 1, reg[1]); ZS_WRITE(zc, 9, reg[9]); ZS_WRITE(zc, 11, reg[11]); ZS_WRITE(zc, 12, reg[12]); ZS_WRITE(zc, 13, reg[13]); ZS_WRITE(zc, 14, reg[14]); ZS_WRITE(zc, 15, reg[15]); ZS_WRITE(zc, 3, reg[3]); ZS_WRITE(zc, 5, reg[5]); } #endif /* NZS > 1 */