# $OpenBSD: RAMDISK,v 1.2 2004/02/01 16:29:59 miod Exp $ # $NetBSD: GENERIC,v 1.27.4.1 2002/08/01 04:18:06 lukem Exp $ # # GENERIC machine description file # # This machine description file is used to generate the default OpenBSD # kernel. The generic kernel does not include all options, subsystems # and device drivers, but should be useful for most applications. # # The machine description file can be customised for your specific # machine to reduce the kernel size and improve its performance. # # For further information on compiling OpenBSD kernels, see the config(8) # man page. # # For further information on hardware support for this architecture, see # the intro(4) man page. For further information about kernel options # for this architecture, see the options(4) man page. For an explanation # of each device driver in this file see the section 4 man page for the # device. machine cats arm # include "../../../conf/GENERIC" option TIMEZONE=0 # time zone to adjust RTC time by option DST=0 # daylight saving time used by RTC option COMPAT_43 # and 4.3BSD option FFS # UFS option NFSCLIENT # Network File System client option CD9660 # ISO 9660 + Rock Ridge file system option MSDOSFS # MS-DOS file system option INET # IP + ICMP + TCP + UDP option INET6 # IPv6 (needs INET) option DDB # kernel debugger option EXT2FS # Second Extended Filesystem option FIFO # FIFOs; RECOMMENDED options SYSCALL_DEBUG options ARM32 options FOOTBRIDGE_INTR # estimated number of users maxusers 32 # Standard system options #options UCONSOLE # users can use TIOCCONS (for xconsole) #options INSECURE # disable kernel securelevel #options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT #options NTP # NTP phase/frequency locked loop # CPU options # For StrongARM systems options CPU_SA110 # Support the SA110 core # FPA options #options ARMFPE # ARM Ltd FPE # Compatibility options option WSDISPLAY_COMPAT_USL # VT handling option WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes option WSDISPLAY_DEFAULTSCREENS=6 # can get raw scancodes option WSDISPLAY_COMPAT_PCVT # can get raw scancodes #config bsd swap generic config bsd root on rd0a swap on rd0b # The main bus device mainbus0 at root # The boot cpu cpu0 at mainbus? # Core logic footbridge0 at mainbus? # footbridge uart fcom0 at footbridge? # system clock via footbridge #clock* at footbridge? # time-of-day device via footbridge or RTC todclock0 at todservice? # PCI bus support # PCI bus via footbridge pci0 at footbridge? # PCI bus pci* at ppb? bus ? option PCIVERBOSE option USBVERBOSE # PCI bridges ppb* at pci? dev ? function ? # PCI-PCI bridges # XXX 'puc's aren't really bridges, but there's no better place for them here #puc* at pci? dev ? function ? # PCI "universal" comm. cards # PCI serial interfaces #com* at puc? port ? # 16x50s on "universal" comm boards #cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards # PCI parallel printer interfaces #lpt* at puc? port ? # || ports on "universal" comm boards # PCI SCSI Controllers and Buses adv* at pci? dev ? function ? # AdvanSys 1200[A,B], ULTRA SCSI scsibus* at adv? #adw* at pci? dev ? function ? # AdvanSys 9xxUW SCSI #scsibus* at adw? ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI controllers scsibus* at ahc? #bha* at pci? dev ? function ? # BusLogic 9xx SCSI #scsibus* at bha? iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI scsibus* at iha? #isp* at pci? dev ? function ? # Qlogic ISP 10x0 SCSI controllers #scsibus* at isp? pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI scsibus* at pcscp? siop* at pci? dev ? function ? # NCR 53c8xx SCSI scsibus* at siop? # SCSI devices sd* at scsibus? target ? lun ? # SCSI disk drives st* at scsibus? target ? lun ? # SCSI tape drives cd* at scsibus? target ? lun ? # SCSI CD-ROM drives #ch* at scsibus? target ? lun ? # SCSI auto-changers #uk* at scsibus? target ? lun ? # SCSI unknown device #ss* at scsibus? target ? lun ? # SCSI scanner # PCI IDE Controllers and Devices # PCI IDE controllers - see pciide(4) for supported hardware. # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know # how to set up DMA modes for this chip. This may work, or may cause # a machine hang with some controllers. pciide* at pci? dev ? function ? flags 0x0000 # IDE drives # Flags are used only with controllers that support DMA operations # and mode settings (e.g. some pciide controllers) # The lowest order four bits (rightmost digit) of the flags define the PIO # mode to use, the next set of four bits the DMA mode and the third set the # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode # to use, and the last bit must be 1 for this setting to be used. # For DMA and UDMA, 0xf (1111) means 'disable'. # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. # (0xc=1100, 0xa=1010, 0xf=1111) # 0x0000 means "use whatever the drive claims to support". wd* at pciide? channel ? drive ? flags 0x0000 # the drives themselves # ATAPI bus support atapiscsi* at pciide? channel ? scsibus* at atapiscsi? # PCI network interfaces #en* at pci? dev ? function ? # ENI/Adaptec ATM #ep* at pci? dev ? function ? # 3C590 ethernet cards fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B ne* at pci? dev ? function ? # NE2000 compat ethernet #ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial dc* at pci? dev ? function ? # DECchip 21x4x and clones de* at pci? dev ? function ? # DECchip 21x4x and clones vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet #lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3 # MII/PHY support exphy* at mii? phy ? # 3Com internal PHYs #icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x inphy* at mii? phy ? # Intel 82555 PHYs #iophy* at mii? phy ? # Intel 82553 PHYs #lxtphy* at mii? phy ? # Level One LXT-970 PHYs nsphy* at mii? phy ? # NS83840 PHYs #nsphyter* at mii? phy ? # NS83843 PHYs qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs #sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs #tlphy* at mii? phy ? # ThunderLAN PHYs #tqphy* at mii? phy ? # TDK Semiconductor PHYs ukphy* at mii? phy ? # generic unknown PHYs # USB Controller and Devices # PCI USB controllers ohci* at pci? # Open Host Controller # USB bus support usb* at ohci? # USB Hubs uhub* at usb? uhub* at uhub? port ? configuration ? interface ? # USB HID device uhidev* at uhub? port ? configuration ? interface ? # USB Mice ums* at uhidev? reportid ? wsmouse* at ums? # USB Keyboards ukbd* at uhidev? reportid ? wskbd* at ukbd? console ? # USB Generic HID devices uhid* at uhidev? reportid ? # USB Printer ulpt* at uhub? port ? configuration ? interface ? # USB Modem umodem* at uhub? port ? configuration ? ucom* at umodem? # USB Mass Storage umass* at uhub? port ? configuration ? interface ? atapiscsi* at umass? scsibus* at umass? # USB audio uaudio* at uhub? port ? configuration ? audio* at uaudio? # USB MIDI umidi* at uhub? port ? configuration ? midi* at umidi? # USB Ethernet adapters aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters cue* at uhub? port ? # CATC USB-EL1201A based adapters kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters # Prolofic PL2301/PL2302 host-to-host adapter upl* at uhub? port ? # Serial adapters # FTDI FT8U100AX serial adapter uftdi* at uhub? port ? ucom* at uftdi? portno ? uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter ucom* at uplcom? portno ? umct* at uhub? port ? # MCT USB-RS232 serial adapter ucom* at umct? portno ? # Diamond Multimedia Rio 500 urio* at uhub? port ? # USB Handspring Visor uvisor* at uhub? port ? ucom* at uvisor? # USB scanners uscanner* at uhub? port ? # USB scanners that use SCSI emulation, e.g., HP5300 usscanner* at uhub? port ? scsibus* at usscanner? # Y@P firmware loader uyap* at uhub? port ? # USB Generic driver ugen* at uhub? port ? # Audio Devices # PCI audio devices #eap* at pci? dev ? function ? # Ensoniq AudioPCI #sv* at pci? dev ? function ? # S3 SonicVibes # Audio support #audio* at eap? #audio* at sv? vga* at pci? wsdisplay* at vga? console ? # ISA bus bridging pcib* at pci? dev ? function ? # PCI-ISA bridge isa* at pcib? # ISA bus # ISA Plug-and-Play bus support #isapnp0 at isa? # wscons pckbc0 at isa? # pc keyboard controller pckbd* at pckbc? # PC keyboard pms* at pckbc? # PS/2 mouse for wsmouse wskbd* at pckbd? console ? wsmouse* at pms? pcppi0 at isa? sysbeep0 at pcppi? # ISA Plug-and-Play serial interfaces #com* at isapnp? # Modems and serial boards # ISA Plug-and-Play network interfaces #ep* at isapnp? # 3Com 3c509 Ethernet # ISA serial interfaces com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports com1 at isa? port 0x2f8 irq 3 #com2 at isa? port 0x3e8 irq 9 #com3 at isa? port 0x2e8 irq 10 # ISA parallel printer interfaces lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports lpt1 at isa? port 0x278 irq 5 #lpt2 at isa? port 0x3bc # ISA floppy #fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers #fdc1 at isa? port 0x370 irq ? drq ? #fd* at fdc? drive ? # the drives themselves # ISA network interface #ne0 at isa? port 0x280 irq 9 #ne1 at isa? port 0x300 irq 10 #ep* at isa? port ? irq ? # The spkr driver provides a simple tone interface to the built in speaker. spkr0 at pcppi? # PC speaker ds1687rtc0 at isa? port 0x72 # Dallas RTC # ISA Plug-and-Play audio devices #ess* at isapnp? # ESS Tech ES1887, ES1888, ES888 audio #sb* at isapnp? # SoundBlaster-compatible audio #wss* at isapnp? # Windows Sound System # MPU 401 UARTs #mpu* at sb? # MIDI support midi* at pcppi? # MIDI interface to the PC speaker #midi* at mpu? # MPU 401 # Joysticks # ISA Plug-and-Play joysticks #joy* at isapnp? # Game ports (usually on audio cards) # ISA joysticks. Probe is a little strange; add only if you have one. #joy0 at isa? port 0x201 # Pseudo-Devices # mouse & keyboard multiplexor pseudo-devices pseudo-device wsmux 2 pseudo-device crypto 1 pseudo-device loop 1 # network loopback pseudo-device bpfilter 1 # packet filter pseudo-device rd 1 # ram disk option BOOT_CONFIG # boot-time kernel config # RAMDISK stuff option MINIROOTSIZE=8192 option RAMDISK_HOOKS