/*	$OpenBSD: vmparam.h,v 1.6 2001/06/27 06:19:44 art Exp $	*/
/*	$NetBSD: vmparam.h,v 1.16 1998/08/20 08:33:48 kleink Exp $	*/

/*
 * Copyright (c) 1988 University of Utah.
 * Copyright (c) 1982, 1986, 1990, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * the Systems Programming Group of the University of Utah Computer
 * Science Department.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * from: Utah $Hdr: vmparam.h 1.16 91/01/18$
 *
 *	@(#)vmparam.h	8.2 (Berkeley) 4/19/94
 */

#ifndef _HP300_VMPARAM_H_
#define	_HP300_VMPARAM_H_

/*
 * Machine dependent constants for HP300
 */

/*
 * USRTEXT is the start of the user text/data space, while USRSTACK
 * is the top (end) of the user stack.  LOWPAGES and HIGHPAGES are
 * the number of pages from the beginning of the P0 region to the
 * beginning of the text and from the beginning of the P1 region to the
 * beginning of the stack respectively.
 *
 * NOTE: the ONLY reason that HIGHPAGES is 0x100 instead of UPAGES (3)
 * is for HPUX compatibility.  Why??  Because HPUX's debuggers
 * have the user's stack hard-wired at FFF00000 for post-mortems,
 * and we must be compatible...
 */
#define	USRTEXT		8192
#define	USRSTACK	(-HIGHPAGES*NBPG)	/* Start of user stack */
#define	BTOPUSRSTACK	(0x100000-HIGHPAGES)	/* btop(USRSTACK) */
#define P1PAGES		0x100000
#define	LOWPAGES	0
#define HIGHPAGES	(0x100000/NBPG)

/*
 * Virtual memory related constants, all in bytes
 */
#ifndef MAXTSIZ
#define	MAXTSIZ		(8*1024*1024)		/* max text size */
#endif
#ifndef DFLDSIZ
#define	DFLDSIZ		(16*1024*1024)		/* initial data size limit */
#endif
#ifndef MAXDSIZ
#define	MAXDSIZ		(64*1024*1024)		/* max data size */
#endif
#ifndef	DFLSSIZ
#define	DFLSSIZ		(512*1024)		/* initial stack size limit */
#endif
#ifndef	MAXSSIZ
#define	MAXSSIZ		MAXDSIZ			/* max stack size */
#endif

/*
 * Default sizes of swap allocation chunks (see dmap.h).
 * The actual values may be changed in vminit() based on MAXDSIZ.
 * With MAXDSIZ of 16Mb and NDMAP of 38, dmmax will be 1024.
 * DMMIN should be at least ctod(1) so that vtod() works.
 * vminit() insures this.
 */
#define	DMMIN	32			/* smallest swap allocation */
#define	DMMAX	4096			/* largest potential swap allocation */

/*
 * Sizes of the system and user portions of the system page table.
 */
/* SYSPTSIZE IS SILLY; IT SHOULD BE COMPUTED AT BOOT TIME */
#define	SYSPTSIZE	(2 * NPTEPG)	/* 8mb */
#define	USRPTSIZE 	(1 * NPTEPG)	/* 4mb */

/*
 * PTEs for mapping user space into the kernel for phyio operations.
 * One page is enough to handle 4Mb of simultaneous raw IO operations.
 */
#ifndef USRIOSIZE
#define USRIOSIZE	(1 * NPTEPG)	/* 4mb */
#endif

/*
 * PTEs for system V style shared memory.
 * This is basically slop for kmempt which we actually allocate (malloc) from.
 */
#ifndef SHMMAXPGS
#define SHMMAXPGS	1024		/* 4mb */
#endif

/*
 * External IO space map size.
 * By default we make it large enough to map up to 3 DIO-II devices and
 * the complete DIO space.  For a 320-only configuration (which has no
 * DIO-II) you could define a considerably smaller region.
 */
#ifndef EIOMAPSIZE
#define EIOMAPSIZE	3584		/* 14mb */
#endif

/*
 * The time for a process to be blocked before being very swappable.
 * This is a number of seconds which the system takes as being a non-trivial
 * amount of real time.  You probably shouldn't change this;
 * it is used in subtle ways (fractions and multiples of it are, that is, like
 * half of a ``long time'', almost a long time, etc.)
 * It is related to human patience and other factors which don't really
 * change over time.
 */
#define	MAXSLP 		20

/*
 * A swapped in process is given a small amount of core without being bothered
 * by the page replacement algorithm.  Basically this says that if you are
 * swapped in you deserve some resources.  We protect the last SAFERSS
 * pages against paging and will just swap you out rather than paging you.
 */
#define	SAFERSS		4		/* nominal ``small'' resident set size
					   protected against replacement */
/*
 * Mach derived constants
 */

/* user/kernel map constants */
#define VM_MIN_ADDRESS		((vaddr_t)0)
#define VM_MAXUSER_ADDRESS	((vaddr_t)0xFFF00000)
#define VM_MAX_ADDRESS		((vaddr_t)0xFFF00000)
#define VM_MIN_KERNEL_ADDRESS	((vaddr_t)0)
#define VM_MAX_KERNEL_ADDRESS	((vaddr_t)0xFFFFF000)

/* virtual sizes (bytes) for various kernel submaps */
#define VM_MBUF_SIZE		(NMBCLUSTERS*MCLBYTES)
#define VM_KMEM_SIZE		(NKMEMCLUSTERS*PAGE_SIZE)
#define VM_PHYS_SIZE		(USRIOSIZE*PAGE_SIZE)

/* # of kernel PT pages (initial only, can grow dynamically) */
#define VM_KERNEL_PT_PAGES	((vsize_t)2)		/* XXX: SYSPTSIZE */

/* pcb base */
#define	pcbb(p)		((u_int)(p)->p_addr)

/*
 * Constants which control the way the VM system deals with memory segments.
 * The hp300 only has one physical memory segment.
 */
#define	VM_PHYSSEG_MAX		1
#define	VM_PHYSSEG_STRAT	VM_PSTRAT_BSEARCH
#define	VM_PHYSSEG_NOADD

#define	VM_NFREELIST		1
#define	VM_FREELIST_DEFAULT	0

/*
 * pmap-specific data stored in the vm_physmem[] array.
 */
struct pmap_physseg {
	struct pv_entry *pvent;		/* pv table for this seg */
	char *attrs;			/* page attributes for this seg */
};

#endif /* _HP300_VMPARAM_H_ */