#	$OpenBSD: LAP,v 1.17 1997/01/01 20:10:34 graichen Exp $
#	$NetBSD: TDR,v 1.64 1996/03/25 05:45:49 perry Exp $
#
#	TDR -- Theo Deraadt's 486
#

machine		i386		# architecture, used by config; REQUIRED

option		I386_CPU	# CPU classes; at least one is REQUIRED
option		I486_CPU
option		I586_CPU
#option		GPL_MATH_EMULATE	# floating point emulation

# Some BIOSes don't get the size of extended memory right.  If you
# have a broken BIOS, uncomment the following and set the value
# properly for your system.
#option		EXTMEM_SIZE=... # size of extended memory

option		DUMMY_NOPS	# speed hack; recommended
option		XSERVER

maxusers	10		# estimated number of users
#option		TIMEZONE=0	# time zone to adjust RTC time by
#option		DST=0		# daylight savings time used by RTC

option		SWAPPAGER	# paging; REQUIRED
option		DEVPAGER	# mmap() of devices

option		DDB		# in-kernel debugger
#option		DIAGNOSTIC	# internal consistency checks
option		KTRACE		# system call tracing, a la ktrace(1)

option		SYSVMSG		# System V-like message queues
option		SYSVSEM		# System V-like semaphores
option		SYSVSHM		# System V-like memory sharing
#option		SHMMAXPGS=1024	# 1024 pages is the default

option		COMPAT_NOMID	# compatibility with 386BSD, BSDI, NetBSD 0.8,
option		COMPAT_09	# NetBSD 0.9,
option		COMPAT_10	# NetBSD 1.0,
option		COMPAT_11	# NetBSD 1.1,
option		COMPAT_43	# and 4.3BSD
#option		TCP_COMPAT_42	# TCP bug compatibility with 4.2BSD

option		COMPAT_SVR4	# binary compatibility with SVR4
option		COMPAT_IBCS2	# binary compatibility with SCO and ISC

option		USER_LDT	# user-settable LDT; used by WINE
option		LKM		# loadable kernel modules

option		FFS,QUOTA	# UFS and quotas
#option		LFS		# log-structured file system
option		MFS		# memory file system

option		NFSCLIENT	# Network File System client
#option		NFSSERVER	# Network File System server

#option		CD9660		# ISO 9660 + Rock Ridge file system
option		MSDOSFS		# MS-DOS file system
#option		FDESC		# /dev/fd
option		FIFO		# FIFOs; RECOMMENDED
option		KERNFS		# /kern
#option		NULLFS		# loopback file system
#option		PORTAL		# create sockets with open(2)
#option		PROCFS		# /proc
#option		UMAPFS		# NULLFS + uid and gid remapping
#option		UNION		# union file system

option		GATEWAY		# packet forwarding
option		INET		# IP + ICMP + TCP + UDP
#option		NS		# XNS
#option		ISO,TPIP	# OSI
#option		EON		# OSI tunneling over IP
#option		CCITT,LLC,HDLC	# X.25

config		bsd	root on wd0 swap on wd0

mainbus0 at root

isa0	at mainbus0
#eisa0	at mainbus0
#pci0	at mainbus0

#ppb*	at pci? dev ? function ?	# PCI-PCI bridges
#pci*	at ppb? bus ?

npx0	at isa? port 0xf0 irq 13	# math coprocessor
isadma0	at isa?
#isapnp0	at isa?

#pc0	at isa? port 0x60 irq 1		# generic PC console device
vt0	at isa? port 0x60 irq 1

com0	at isa? port 0x3f8 irq 4	# standard PC serial ports
com1	at isa? port 0x2f8 irq 3
#com2	at isa? port 0x3e8 irq 5
#com3	at isa? port 0x2e8 irq 9
#ast0	at isa? port 0x1a0 irq 5	# AST 4-port serial cards
#com*	at ast? slave ?
#rtfps0	at isa? port 0x1230 irq 10	# RT 4-port serial cards
#com*	at rtfps? slave ?

#cy0	at isa? ...

#lpt0	at isa? port 0x378 irq 7	# standard PC parallel ports
#lpt1	at isa? port 0x278
#lpt2	at isa? port 0x3bc

#lms0	at isa? port 0x23c irq 5	# Logitech bus mouse
#lms1	at isa? port 0x238 irq 5
#mms0	at isa? port 0x23c irq 5	# Microsoft InPort mouse
#mms1	at isa? port 0x238 irq 5
pms0	at pckbd? irq 12		# PS/2 auxiliary port mouse

#aha0	at isa? port 0x330 irq ? drq ?	# Adaptec 154[02] SCSI controllers
#aha1	at isa? port 0x334 irq ? drq ?	# Adaptec 154[02] SCSI controllers
#scsibus* at aha?
#ahb*	at eisa? slot ?			# Adaptec 174[024] SCSI controllers
#scsibus* at ahb?
#aic0	at isa? port 0x340 irq 12	# Adaptec 152[02] SCSI controllers
#scsibus* at aic?
#bt0	at isa? port 0x330 irq ? drq ?	# BusLogic [57]4X SCSI controllers
#bt1	at isa? port 0x334 irq ? drq ?	# BusLogic [57]4X SCSI controllers
#bt2	at isa? port ? irq ?
#scsibus* at bt?
#ncr*	at pci? dev ? function ?	# NCR 538XX SCSI controllers
#scsibus* at ncr?
#sea0	at isa? iomem 0xc8000 irq 5
#scsibus* at sea?
#uha0	at isa? port 0x330 irq ? drq ?	# UltraStor [13]4f SCSI controllers
#uha1	at isa? port 0x334 irq ? drq ?	# UltraStor [13]4f SCSI controllers
#uha*	at eisa? slot ?			# UltraStor 24f SCSI controllers
#scsibus* at uha?
#sd*	at scsibus? target ? lun ?	# SCSI disk drives
#st*	at scsibus? target ? lun ?	# SCSI tape drives
#cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
#ch*	at scsibus? target ? lun ?	# SCSI autochangers

fdc0	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy controllers
#fdc1	at isa? port 0x370 irq ? drq ?
fd*	at fdc? drive ?

#mcd0	at isa? port 0x300 irq 7	# Mitsumi CD-ROM drives

wdc0	at isa? port 0x1f0 irq 14	# ST506, ESDI, and IDE controllers
#wdc1	at isa? port 0x170 irq ?
wd*	at wdc? drive ?

#wt0	at isa? port 0x300 irq 5 drq 1	# Archive and Wangtek QIC tape drives

#ed0	at isa? port 0x280 iomem 0xd0000 irq 9	# WD/SMC, 3C503, and NE[12]000
#ed1	at isa? port 0x250 iomem 0xd8000 irq 9	#   ethernet cards
#ed2	at isa? port 0x300 iomem 0xcc000 irq 10
#eg0	at isa? ...				# 3C505 ethernet cards
#el0	at isa? port 0x300 irq 9		# 3C501 ethernet cards
#ep0	at isa? port ? irq ?			# 3C509 ethernet cards
#ep1	at isa? port ? irq ?
#ep2	at isa? port ? irq ?
#ie0	at isa? port 0x360 iomem 0xd0000 irq 7	# StarLAN & 3C507 ethernet cards
#le0	at isa? port 0x320 irq 10 drq 7		# IsoLan, NE2100, and DEPCA

#sb0	at isa? port 0x220 irq 7 drq 1	# SoundBlaster
#spkr0	at pckbd? port 0x61

option		APM_NOIDLE
#option		PCIVERBOSE
#option		PCMCIA_DEBUG
#option		PCMCIA_ISA_DEBUG

#apm0	at mainbus?
pcmcia* at pcic?

# Multiple controllers need some testing.  Some laptops have multiple PCIC
# controllers instead of two-slot controllers.
# The i82365 (pcic) controller uses the same ports for the first two
# controllers and for the second two controllers.
# On some systems there the pcicmaster is a pci-chip (you'll see a pci
# device of the type "class bridge, subclass PCMCIA, ..." at bootup)
# you may try the following:
#
#   pcicmaster0     at isa? port 0x3000 size 2
#   pcic0           at pcicmaster0 irq 11 iomem 0xd4000 iosiz 4096
#
# IRQ 2/9 doesn't seem to work for status change interrupts, so use one
# of the higher ones.
pcicmaster0	at isa? port 0x3E0 size 2
pcic0	at pcicmaster0 irq 11 iomem 0xd4000 iosiz 4096
pcic1	at pcicmaster0 irq 12 iomem 0xd5000 iosiz 4096
pcicmaster1 at isa? port 0x3E2 size 2
pcic2	at pcicmaster1 irq 11 iomem 0xd6000 iosiz 4096
pcic3	at pcicmaster1 irq 12 iomem 0xd7000 iosiz 4096

ed0	at pcmcia? port 0x300 iomem 0xd8000 iosiz 8192 	irq 10
ed0	at pcmcia? port 0x300 size 0x20 irq 10 slot ?
ep0	at pcmcia? port 0x300 size 0x10 irq 10 slot ?
#com1	at pcmcia? port 0x2f8 size 8 irq 5 slot ?
#com2	at pcmcia? port 0x3e8 size 8 irq 5 slot ?
com3	at pcmcia? port 0x2e8 size 8 irq 3 slot ?

pseudo-device	loop	1		# network loopback
pseudo-device	bpfilter 16		# packet filter
pseudo-device	sl	2		# CSLIP
pseudo-device	ppp	2		# PPP
pseudo-device	tun	2		# network tunneling over tty

pseudo-device	pty	32		# pseudo-terminals
#pseudo-device	tb	1		# tablet line discipline
pseudo-device	vnd	4		# paging to files