/* $OpenBSD: pccom.c,v 1.61 2007/05/09 14:32:17 deraadt Exp $ */ /* $NetBSD: com.c,v 1.82.4.1 1996/06/02 09:08:00 mrg Exp $ */ /* * Copyright (c) 1997 - 1999, Jason Downs. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name(s) of the author(s) nor the name OpenBSD * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /*- * Copyright (c) 1993, 1994, 1995, 1996 * Charles M. Hannum. All rights reserved. * Copyright (c) 1991 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)com.c 7.5 (Berkeley) 5/16/91 */ /* * PCCOM driver, uses National Semiconductor NS16450/NS16550AF UART */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define com_lcr com_cfcr #ifdef DDB #include #endif #include "pccomvar.h" #include "pccom.h" /* XXX: These belong elsewhere */ cdev_decl(com); static u_char tiocm_xxx2mcr(int); void pccom_xr16850_fifo_init(bus_space_tag_t, bus_space_handle_t); /* * XXX the following two cfattach structs should be different, and possibly * XXX elsewhere. */ int comprobe(struct device *, void *, void *); void comattach(struct device *, struct device *, void *); void compwroff(struct com_softc *); #if NPCCOM_ISA struct cfattach pccom_isa_ca = { sizeof(struct com_softc), comprobe, comattach }; #endif #if NPCCOM_ISAPNP struct cfattach pccom_isapnp_ca = { sizeof(struct com_softc), comprobe, comattach }; #endif #if NPCCOM_COMMULTI struct cfattach pccom_commulti_ca = { sizeof(struct com_softc), comprobe, comattach }; #endif struct cfdriver pccom_cd = { NULL, "pccom", DV_TTY }; void cominit(bus_space_tag_t, bus_space_handle_t, int); #ifndef CONSPEED #define CONSPEED B9600 #endif #if defined(COMCONSOLE) || defined(PCCOMCONSOLE) int comdefaultrate = CONSPEED; /* XXX why set default? */ #else int comdefaultrate = TTYDEF_SPEED; #endif bus_addr_t comconsaddr; int comconsinit; int comconsattached; bus_space_tag_t comconsiot; bus_space_handle_t comconsioh; tcflag_t comconscflag = TTYDEF_CFLAG; int commajor; int comsopen = 0; #ifdef KGDB #include bus_addr_t com_kgdb_addr; bus_space_tag_t com_kgdb_iot; bus_space_handle_t com_kgdb_ioh; int com_kgdb_getc(void *); void com_kgdb_putc(void *, int); #endif /* KGDB */ #define DEVUNIT(x) (minor(x) & 0x7f) #define DEVCUA(x) (minor(x) & 0x80) /* Macros for determining bus type. */ #if NPCCOM_ISA || NPCCOM_PCMCIA #define IS_ISA(parent) \ (!strcmp((parent)->dv_cfdata->cf_driver->cd_name, "isa") || \ !strcmp((parent)->dv_cfdata->cf_driver->cd_name, "pcmcia")) #elif NPCCOM_ISA #define IS_ISA(parent) \ !strcmp((parent)->dv_cfdata->cf_driver->cd_name, "isa") #elif NPCCOM_ISAPNP #define IS_ISA(parent) 0 #endif #if NPCCOM_ISAPNP #define IS_ISAPNP(parent) \ !strcmp((parent)->dv_cfdata->cf_driver->cd_name, "isapnp") #else #define IS_ISAPNP(parent) 0 #endif int comspeed(long freq, long speed) { #define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */ int x, err; if (speed == 0) return 0; if (speed < 0) return -1; x = divrnd((freq / 16), speed); if (x <= 0) return -1; err = divrnd((quad_t)freq * 1000 / 16, speed * x) - 1000; if (err < 0) err = -err; if (err > COM_TOLERANCE) return -1; return x; #undef divrnd } int comprobe1(bus_space_tag_t iot, bus_space_handle_t ioh) { int i, k; /* force access to id reg */ bus_space_write_1(iot, ioh, com_lcr, 0); bus_space_write_1(iot, ioh, com_iir, 0); for (i = 0; i < 32; i++) { k = bus_space_read_1(iot, ioh, com_iir); if (k & 0x38) { bus_space_read_1(iot, ioh, com_data); /* cleanup */ } else break; } if (i >= 32) return 0; return 1; } int comprobe(struct device *parent, void *match, void *aux) { bus_space_tag_t iot; bus_space_handle_t ioh; int iobase, needioh; int rv = 1; /* * XXX should be broken out into functions for isa probe and * XXX for commulti probe, with a helper function that contains * XXX most of the interesting stuff. */ /* #if NPCCOM_ISA || NPCCOM_PCMCIA || NPCCOM_ISAPNP */ #if NPCCOM_ISA || NPCCOM_ISAPNP if (IS_ISA(parent) || IS_ISAPNP(parent)) { struct isa_attach_args *ia = aux; iot = ia->ia_iot; iobase = ia->ia_iobase; if (IS_ISAPNP(parent)) { ioh = ia->ia_ioh; needioh = 0; } else needioh = 1; } else #endif #if NPCCOM_COMMULTI if (1) { struct cfdata *cf = match; struct commulti_attach_args *ca = aux; if (cf->cf_loc[0] != -1 && cf->cf_loc[0] != ca->ca_slave) return (0); iot = ca->ca_iot; iobase = ca->ca_iobase; ioh = ca->ca_ioh; needioh = 0; } else #endif return(0); /* This cannot happen */ #ifdef KGDB if (iobase == com_kgdb_addr) goto out; #endif /* KGDB */ /* if it's in use as console, it's there. */ if (iobase == comconsaddr && !comconsattached) goto out; if (needioh && bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh)) { rv = 0; goto out; } rv = comprobe1(iot, ioh); if (needioh) bus_space_unmap(iot, ioh, COM_NPORTS); out: /* #if NPCCOM_ISA || NPCCOM_PCMCIA */ #if NPCCOM_ISA if (rv) { struct isa_attach_args *ia = aux; ia->ia_iosize = COM_NPORTS; ia->ia_msize = 0; } #endif return (rv); } void comattach(struct device *parent, struct device *self, void *aux) { struct com_softc *sc = (void *)self; bus_addr_t iobase; bus_space_tag_t iot; bus_space_handle_t ioh; int irq; /* * XXX should be broken out into functions for isa attach and * XXX for commulti attach, with a helper function that contains * XXX most of the interesting stuff. */ /* #if NPCCOM_ISA || NPCCOM_PCMCIA || NPCCOM_ISAPNP */ #if NPCCOM_ISA || NPCCOM_ISAPNP if (IS_ISA(parent) || IS_ISAPNP(parent)) { struct isa_attach_args *ia = aux; /* * We're living on an isa. */ iobase = ia->ia_iobase; iot = ia->ia_iot; if (IS_ISAPNP(parent)) { /* No console support! */ ioh = ia->ia_ioh; } else { #ifdef KGDB if ((iobase != comconsaddr) && (iobase != com_kgdb_addr)) { #else if (iobase != comconsaddr) { #endif /* KGDB */ if (bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh)) panic("comattach: io mapping failed"); } else #ifdef KGDB if (iobase == comconsaddr) { ioh = comconsioh; } else { ioh = com_kgdb_ioh; } #else ioh = comconsioh; #endif /* KGDB */ } irq = ia->ia_irq; } else #endif #if NPCCOM_COMMULTI if (1) { struct commulti_attach_args *ca = aux; /* * We're living on a commulti. */ iobase = ca->ca_iobase; iot = ca->ca_iot; ioh = ca->ca_ioh; irq = IRQUNK; if (ca->ca_noien) SET(sc->sc_hwflags, COM_HW_NOIEN); } else #endif panic("comattach: impossible"); sc->sc_iot = iot; sc->sc_ioh = ioh; sc->sc_iobase = iobase; sc->sc_frequency = COM_FREQ; sc->sc_hwflags = 0; sc->sc_swflags = 0; if (irq != IRQUNK) { /* disable interrupts */ bus_space_write_1(iot, ioh, com_ier, 0); /* #if NPCCOM_ISA || NPCCOM_PCMCIA || NPCCOM_ISAPNP */ #if NPCCOM_ISA || NPCCOM_ISAPNP if (IS_ISA(parent) || IS_ISAPNP(parent)) { struct isa_attach_args *ia = aux; #ifdef KGDB if (iobase == com_kgdb_addr) { sc->sc_ih = isa_intr_establish(ia->ia_ic, irq, IST_EDGE, IPL_HIGH, kgdbintr, sc, sc->sc_dev.dv_xname); } else { sc->sc_ih = isa_intr_establish(ia->ia_ic, irq, IST_EDGE, IPL_HIGH, comintr, sc, sc->sc_dev.dv_xname); } #else sc->sc_ih = isa_intr_establish(ia->ia_ic, irq, IST_EDGE, IPL_HIGH, comintr, sc, sc->sc_dev.dv_xname); #endif /* KGDB */ } else #endif panic("comattach: IRQ but can't have one"); } com_attach_subr(sc); } int com_detach(struct device *self, int flags) { struct com_softc *sc = (struct com_softc *)self; int maj, mn; /* locate the major number */ for (maj = 0; maj < nchrdev; maj++) if (cdevsw[maj].d_open == comopen) break; /* Nuke the vnodes for any open instances. */ mn = self->dv_unit; vdevgone(maj, mn, mn, VCHR); /* XXX a symbolic constant for the cua bit would be nicer. */ mn |= 0x80; vdevgone(maj, mn, mn, VCHR); /* Detach and free the tty. */ if (sc->sc_tty) { ttyfree(sc->sc_tty); } timeout_del(&sc->sc_dtr_tmo); timeout_del(&sc->sc_diag_tmo); return (0); } int com_activate(struct device *self, enum devact act) { struct com_softc *sc = (struct com_softc *)self; int s, rv = 0; /* XXX splserial, when we get that. */ s = spltty(); switch (act) { case DVACT_ACTIVATE: break; case DVACT_DEACTIVATE: #ifdef KGDB if (sc->sc_hwflags & (COM_HW_CONSOLE|COM_HW_KGDB)) { #else if (sc->sc_hwflags & COM_HW_CONSOLE) { #endif /* KGDB */ rv = EBUSY; break; } if (sc->disable != NULL && sc->enabled != 0) { (*sc->disable)(sc); sc->enabled = 0; } break; } splx(s); return (rv); } int comopen(dev_t dev, int flag, int mode, struct proc *p) { int unit = DEVUNIT(dev); struct com_softc *sc; bus_space_tag_t iot; bus_space_handle_t ioh; struct tty *tp; int s; int error = 0; if (unit >= pccom_cd.cd_ndevs) return ENXIO; sc = pccom_cd.cd_devs[unit]; if (!sc) return ENXIO; #ifdef KGDB /* * If this is the kgdb port, no other use is permitted. */ if (ISSET(sc->sc_hwflags, COM_HW_KGDB)) return (EBUSY); #endif /* KGDB */ s = spltty(); if (!sc->sc_tty) { tp = sc->sc_tty = ttymalloc(); } else tp = sc->sc_tty; splx(s); tp->t_oproc = comstart; tp->t_param = comparam; tp->t_hwiflow = comhwiflow; tp->t_dev = dev; if (!ISSET(tp->t_state, TS_ISOPEN)) { SET(tp->t_state, TS_WOPEN); ttychars(tp); tp->t_iflag = TTYDEF_IFLAG; tp->t_oflag = TTYDEF_OFLAG; if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) tp->t_cflag = comconscflag; else tp->t_cflag = TTYDEF_CFLAG; if (ISSET(sc->sc_swflags, COM_SW_CLOCAL)) SET(tp->t_cflag, CLOCAL); if (ISSET(sc->sc_swflags, COM_SW_CRTSCTS)) SET(tp->t_cflag, CRTSCTS); if (ISSET(sc->sc_swflags, COM_SW_MDMBUF)) SET(tp->t_cflag, MDMBUF); tp->t_lflag = TTYDEF_LFLAG; tp->t_ispeed = tp->t_ospeed = comdefaultrate; s = spltty(); iot = sc->sc_iot; ioh = sc->sc_ioh; /* * Wake up the sleepy heads. */ switch (sc->sc_uarttype) { case COM_UART_ST16650: case COM_UART_ST16650V2: case COM_UART_ST16C654: case COM_UART_XR16850: case COM_UART_OX16C950: bus_space_write_1(iot, ioh, com_lcr, LCR_EFR); bus_space_write_1(iot, ioh, com_efr, EFR_ECB); bus_space_write_1(iot, ioh, com_ier, 0); bus_space_write_1(iot, ioh, com_efr, 0); bus_space_write_1(iot, ioh, com_lcr, 0); break; case COM_UART_TI16750: bus_space_write_1(iot, ioh, com_ier, 0); break; } sc->sc_initialize = 1; comparam(tp, &tp->t_termios); ttsetwater(tp); sc->sc_rxput = sc->sc_rxget = sc->sc_tbc = 0; if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) { u_int8_t fifo = FIFO_ENABLE|FIFO_RCV_RST|FIFO_XMT_RST; u_int8_t lcr; switch (sc->sc_uarttype) { case COM_UART_ST16650V2: if (tp->t_ispeed <= 1200) fifo |= FIFO_RCV_TRIGGER_8|FIFO_XMT_TRIGGER_8; /* XXX */ else fifo |= FIFO_RCV_TRIGGER_28|FIFO_XMT_TRIGGER_30; break; case COM_UART_ST16C654: if (tp->t_ispeed <= 1200) fifo |= FIFO_RCV3_TRIGGER_8|FIFO_XMT3_TRIGGER_8; /* XXX */ else fifo |= FIFO_RCV3_TRIGGER_60|FIFO_XMT3_TRIGGER_56; break; case COM_UART_XR16850: case COM_UART_OX16C950: pccom_xr16850_fifo_init(iot, ioh); if (tp->t_ispeed <= 1200) fifo |= FIFO_RCV3_TRIGGER_8|FIFO_XMT3_TRIGGER_8; /* XXX */ else fifo |= FIFO_RCV3_TRIGGER_60|FIFO_XMT3_TRIGGER_56; break; case COM_UART_TI16750: fifo |= FIFO_ENABLE_64BYTE; lcr = bus_space_read_1(iot, ioh, com_lcr); bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB); default: if (tp->t_ispeed <= 1200) fifo |= FIFO_TRIGGER_1; else fifo |= FIFO_TRIGGER_8; } /* * (Re)enable and drain FIFOs. * * Certain SMC chips cause problems if the FIFOs are * enabled while input is ready. Turn off the FIFO * if necessary to clear the input. Test the input * ready bit after enabling the FIFOs to handle races * between enabling and fresh input. * * Set the FIFO threshold based on the receive speed. */ for (;;) { bus_space_write_1(iot, ioh, com_fifo, 0); delay(100); (void) bus_space_read_1(iot, ioh, com_data); bus_space_write_1(iot, ioh, com_fifo, fifo | FIFO_RCV_RST | FIFO_XMT_RST); delay(100); if(!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY)) break; } if (sc->sc_uarttype == COM_UART_TI16750) bus_space_write_1(iot, ioh, com_lcr, lcr); } /* flush any pending I/O */ while (ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY)) (void) bus_space_read_1(iot, ioh, com_data); /* you turn me on, baby */ sc->sc_mcr = MCR_DTR | MCR_RTS; if (!ISSET(sc->sc_hwflags, COM_HW_NOIEN)) SET(sc->sc_mcr, MCR_IENABLE); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); sc->sc_ier = IER_ERXRDY | IER_ERLS | IER_EMSC; bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); sc->sc_msr = bus_space_read_1(iot, ioh, com_msr); if (ISSET(sc->sc_swflags, COM_SW_SOFTCAR) || DEVCUA(dev) || ISSET(sc->sc_msr, MSR_DCD) || ISSET(tp->t_cflag, MDMBUF)) SET(tp->t_state, TS_CARR_ON); else CLR(tp->t_state, TS_CARR_ON); } else if (ISSET(tp->t_state, TS_XCLUDE) && p->p_ucred->cr_uid != 0) return EBUSY; else s = spltty(); if (DEVCUA(dev)) { if (ISSET(tp->t_state, TS_ISOPEN)) { /* Ah, but someone already is dialed in... */ splx(s); return EBUSY; } sc->sc_cua = 1; /* We go into CUA mode */ } else { /* tty (not cua) device; wait for carrier if necessary */ if (ISSET(flag, O_NONBLOCK)) { if (sc->sc_cua) { /* Opening TTY non-blocking... but the CUA is busy */ splx(s); return EBUSY; } } else { while (sc->sc_cua || (!ISSET(tp->t_cflag, CLOCAL) && !ISSET(tp->t_state, TS_CARR_ON))) { SET(tp->t_state, TS_WOPEN); error = ttysleep(tp, &tp->t_rawq, TTIPRI | PCATCH, ttopen, 0); /* * If TS_WOPEN has been reset, that means the cua device * has been closed. We don't want to fail in that case, * so just go around again. */ if (error && ISSET(tp->t_state, TS_WOPEN)) { CLR(tp->t_state, TS_WOPEN); if (!sc->sc_cua && !ISSET(tp->t_state, TS_ISOPEN)) compwroff(sc); splx(s); return error; } } } } splx(s); return (*linesw[tp->t_line].l_open)(dev, tp); } int comclose(dev_t dev, int flag, int mode, struct proc *p) { int unit = DEVUNIT(dev); struct com_softc *sc = pccom_cd.cd_devs[unit]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct tty *tp = sc->sc_tty; int s; /* XXX This is for cons.c. */ if (!ISSET(tp->t_state, TS_ISOPEN)) return 0; (*linesw[tp->t_line].l_close)(tp, flag); s = spltty(); if (ISSET(tp->t_state, TS_WOPEN)) { /* tty device is waiting for carrier; drop dtr then re-raise */ CLR(sc->sc_mcr, MCR_DTR | MCR_RTS); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); timeout_add(&sc->sc_dtr_tmo, hz * 2); } else { /* no one else waiting; turn off the uart */ compwroff(sc); } CLR(tp->t_state, TS_BUSY | TS_FLUSH); sc->sc_cua = 0; splx(s); ttyclose(tp); #ifdef notyet /* XXXX */ if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { ttyfree(tp); sc->sc_tty = 0; } #endif return 0; } void compwroff(struct com_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct tty *tp = sc->sc_tty; CLR(sc->sc_lcr, LCR_SBREAK); bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr); bus_space_write_1(iot, ioh, com_ier, 0); if (ISSET(tp->t_cflag, HUPCL) && !ISSET(sc->sc_swflags, COM_SW_SOFTCAR)) { /* XXX perhaps only clear DTR */ sc->sc_mcr = 0; bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } /* * Turn FIFO off; enter sleep mode if possible. */ bus_space_write_1(iot, ioh, com_fifo, 0); delay(100); (void) bus_space_read_1(iot, ioh, com_data); delay(100); bus_space_write_1(iot, ioh, com_fifo, FIFO_RCV_RST | FIFO_XMT_RST); switch (sc->sc_uarttype) { case COM_UART_ST16650: case COM_UART_ST16650V2: case COM_UART_ST16C654: case COM_UART_XR16850: case COM_UART_OX16C950: bus_space_write_1(iot, ioh, com_lcr, LCR_EFR); bus_space_write_1(iot, ioh, com_efr, EFR_ECB); bus_space_write_1(iot, ioh, com_ier, IER_SLEEP); bus_space_write_1(iot, ioh, com_lcr, 0); break; case COM_UART_TI16750: bus_space_write_1(iot, ioh, com_ier, IER_SLEEP); break; } } void com_raisedtr(void *arg) { struct com_softc *sc = arg; SET(sc->sc_mcr, MCR_DTR | MCR_RTS); bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_mcr, sc->sc_mcr); } int comread(dev_t dev, struct uio *uio, int flag) { struct com_softc *sc = pccom_cd.cd_devs[DEVUNIT(dev)]; struct tty *tp = sc->sc_tty; return ((*linesw[tp->t_line].l_read)(tp, uio, flag)); } int comwrite(dev_t dev, struct uio *uio, int flag) { struct com_softc *sc = pccom_cd.cd_devs[DEVUNIT(dev)]; struct tty *tp = sc->sc_tty; return ((*linesw[tp->t_line].l_write)(tp, uio, flag)); } struct tty * comtty(dev_t dev) { struct com_softc *sc = pccom_cd.cd_devs[DEVUNIT(dev)]; struct tty *tp = sc->sc_tty; return (tp); } static u_char tiocm_xxx2mcr(int data) { u_char m = 0; if (ISSET(data, TIOCM_DTR)) SET(m, MCR_DTR); if (ISSET(data, TIOCM_RTS)) SET(m, MCR_RTS); return m; } int comioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p) { int unit = DEVUNIT(dev); struct com_softc *sc = pccom_cd.cd_devs[unit]; struct tty *tp = sc->sc_tty; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int error; error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p); if (error >= 0) return error; error = ttioctl(tp, cmd, data, flag, p); if (error >= 0) return error; switch (cmd) { case TIOCSBRK: SET(sc->sc_lcr, LCR_SBREAK); bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr); break; case TIOCCBRK: CLR(sc->sc_lcr, LCR_SBREAK); bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr); break; case TIOCSDTR: SET(sc->sc_mcr, sc->sc_dtr); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); break; case TIOCCDTR: CLR(sc->sc_mcr, sc->sc_dtr); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); break; case TIOCMSET: CLR(sc->sc_mcr, MCR_DTR | MCR_RTS); case TIOCMBIS: SET(sc->sc_mcr, tiocm_xxx2mcr(*(int *)data)); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); break; case TIOCMBIC: CLR(sc->sc_mcr, tiocm_xxx2mcr(*(int *)data)); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); break; case TIOCMGET: { u_char m; int bits = 0; m = sc->sc_mcr; if (ISSET(m, MCR_DTR)) SET(bits, TIOCM_DTR); if (ISSET(m, MCR_RTS)) SET(bits, TIOCM_RTS); m = sc->sc_msr; if (ISSET(m, MSR_DCD)) SET(bits, TIOCM_CD); if (ISSET(m, MSR_CTS)) SET(bits, TIOCM_CTS); if (ISSET(m, MSR_DSR)) SET(bits, TIOCM_DSR); if (ISSET(m, MSR_RI | MSR_TERI)) SET(bits, TIOCM_RI); if (bus_space_read_1(iot, ioh, com_ier)) SET(bits, TIOCM_LE); *(int *)data = bits; break; } case TIOCGFLAGS: { int driverbits, userbits = 0; driverbits = sc->sc_swflags; if (ISSET(driverbits, COM_SW_SOFTCAR)) SET(userbits, TIOCFLAG_SOFTCAR); if (ISSET(driverbits, COM_SW_CLOCAL)) SET(userbits, TIOCFLAG_CLOCAL); if (ISSET(driverbits, COM_SW_CRTSCTS)) SET(userbits, TIOCFLAG_CRTSCTS); if (ISSET(driverbits, COM_SW_MDMBUF)) SET(userbits, TIOCFLAG_MDMBUF); *(int *)data = userbits; break; } case TIOCSFLAGS: { int userbits, driverbits = 0; error = suser(p, 0); if (error != 0) return(EPERM); userbits = *(int *)data; if (ISSET(userbits, TIOCFLAG_SOFTCAR) || ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) SET(driverbits, COM_SW_SOFTCAR); if (ISSET(userbits, TIOCFLAG_CLOCAL)) SET(driverbits, COM_SW_CLOCAL); if (ISSET(userbits, TIOCFLAG_CRTSCTS)) SET(driverbits, COM_SW_CRTSCTS); if (ISSET(userbits, TIOCFLAG_MDMBUF)) SET(driverbits, COM_SW_MDMBUF); sc->sc_swflags = driverbits; break; } default: return ENOTTY; } return 0; } int comparam(struct tty *tp, struct termios *t) { struct com_softc *sc = pccom_cd.cd_devs[DEVUNIT(tp->t_dev)]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int ospeed = comspeed(sc->sc_frequency, t->c_ospeed); u_int8_t lcr; tcflag_t oldcflag; int s; /* check requested parameters */ if (ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed)) return EINVAL; lcr = ISSET(sc->sc_lcr, LCR_SBREAK); switch (ISSET(t->c_cflag, CSIZE)) { case CS5: SET(lcr, LCR_5BITS); break; case CS6: SET(lcr, LCR_6BITS); break; case CS7: SET(lcr, LCR_7BITS); break; case CS8: SET(lcr, LCR_8BITS); break; } if (ISSET(t->c_cflag, PARENB)) { SET(lcr, LCR_PENAB); if (!ISSET(t->c_cflag, PARODD)) SET(lcr, LCR_PEVEN); } if (ISSET(t->c_cflag, CSTOPB)) SET(lcr, LCR_STOPB); sc->sc_lcr = lcr; s = spltty(); if (ospeed == 0) { CLR(sc->sc_mcr, MCR_DTR); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } /* * Set the FIFO threshold based on the receive speed, if we are * changing it. */ if (sc->sc_initialize || (tp->t_ispeed != t->c_ispeed)) { sc->sc_initialize = 0; if (ospeed != 0) { /* * Make sure the transmit FIFO is empty before * proceeding. If we don't do this, some revisions * of the UART will hang. Interestingly enough, * even if we do this while the last character is * still being pushed out, they don't hang. This * seems good enough. */ while (ISSET(tp->t_state, TS_BUSY)) { int error; ++sc->sc_halt; error = ttysleep(tp, &tp->t_outq, TTOPRI | PCATCH, "comprm", 0); --sc->sc_halt; if (error) { splx(s); comstart(tp); return (error); } } bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB); bus_space_write_1(iot, ioh, com_dlbl, ospeed); bus_space_write_1(iot, ioh, com_dlbh, ospeed >> 8); bus_space_write_1(iot, ioh, com_lcr, lcr); SET(sc->sc_mcr, MCR_DTR); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } else bus_space_write_1(iot, ioh, com_lcr, lcr); if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) { u_int8_t fifo = FIFO_ENABLE; u_int8_t lcr2; switch (sc->sc_uarttype) { case COM_UART_ST16650V2: if (t->c_ispeed <= 1200) fifo |= FIFO_RCV_TRIGGER_8|FIFO_XMT_TRIGGER_8; /* XXX */ else fifo |= FIFO_RCV_TRIGGER_28|FIFO_XMT_TRIGGER_30; break; case COM_UART_ST16C654: case COM_UART_XR16850: case COM_UART_OX16C950: if (t->c_ispeed <= 1200) fifo |= FIFO_RCV3_TRIGGER_8|FIFO_XMT3_TRIGGER_8; /* XXX */ else fifo |= FIFO_RCV3_TRIGGER_60|FIFO_XMT3_TRIGGER_56; break; case COM_UART_TI16750: fifo |= FIFO_ENABLE_64BYTE; lcr2 = bus_space_read_1(iot, ioh, com_lcr); bus_space_write_1(iot, ioh, com_lcr, lcr2 | LCR_DLAB); default: if (t->c_ispeed <= 1200) fifo |= FIFO_TRIGGER_1; else fifo |= FIFO_TRIGGER_8; } bus_space_write_1(iot, ioh, com_fifo, fifo); if (sc->sc_uarttype == COM_UART_TI16750) bus_space_write_1(iot, ioh, com_lcr, lcr2); } } else bus_space_write_1(iot, ioh, com_lcr, lcr); /* When not using CRTSCTS, RTS follows DTR. */ if (!ISSET(t->c_cflag, CRTSCTS)) { if (ISSET(sc->sc_mcr, MCR_DTR)) { if (!ISSET(sc->sc_mcr, MCR_RTS)) { SET(sc->sc_mcr, MCR_RTS); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } } else { if (ISSET(sc->sc_mcr, MCR_RTS)) { CLR(sc->sc_mcr, MCR_RTS); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } } sc->sc_dtr = MCR_DTR | MCR_RTS; } else sc->sc_dtr = MCR_DTR; /* and copy to tty */ tp->t_ispeed = t->c_ispeed; tp->t_ospeed = t->c_ospeed; oldcflag = tp->t_cflag; tp->t_cflag = t->c_cflag; /* * If DCD is off and MDMBUF is changed, ask the tty layer if we should * stop the device. */ if (!ISSET(sc->sc_msr, MSR_DCD) && !ISSET(sc->sc_swflags, COM_SW_SOFTCAR) && ISSET(oldcflag, MDMBUF) != ISSET(tp->t_cflag, MDMBUF) && (*linesw[tp->t_line].l_modem)(tp, 0) == 0) { CLR(sc->sc_mcr, sc->sc_dtr); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } /* Just to be sure... */ splx(s); comstart(tp); return 0; } /* * (un)block input via hw flowcontrol */ int comhwiflow(struct tty *tp, int block) { struct com_softc *sc = pccom_cd.cd_devs[DEVUNIT(tp->t_dev)]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int s; /* * XXX * Is spltty needed at all ? sc->sc_mcr is only in comsoft() not comintr() */ s = spltty(); if (block) { /* When not using CRTSCTS, RTS follows DTR. */ if (ISSET(tp->t_cflag, MDMBUF)) { CLR(sc->sc_mcr, (MCR_DTR | MCR_RTS)); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } else { CLR(sc->sc_mcr, MCR_RTS); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } } else { /* When not using CRTSCTS, RTS follows DTR. */ if (ISSET(tp->t_cflag, MDMBUF)) { SET(sc->sc_mcr, (MCR_DTR | MCR_RTS)); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } else { SET(sc->sc_mcr, MCR_RTS); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } } splx(s); return 1; } void comstart(struct tty *tp) { struct com_softc *sc = pccom_cd.cd_devs[DEVUNIT(tp->t_dev)]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int s, count; s = spltty(); if (ISSET(tp->t_state, TS_BUSY)) goto out; if (ISSET(tp->t_state, TS_TIMEOUT | TS_TTSTOP) || sc->sc_halt > 0) goto stopped; if (ISSET(tp->t_cflag, CRTSCTS) && !ISSET(sc->sc_msr, MSR_CTS)) goto stopped; if (tp->t_outq.c_cc <= tp->t_lowat) { if (ISSET(tp->t_state, TS_ASLEEP)) { CLR(tp->t_state, TS_ASLEEP); wakeup((caddr_t)&tp->t_outq); } selwakeup(&tp->t_wsel); } count = ndqb(&tp->t_outq, 0); splhigh(); if (count > 0) { int n; SET(tp->t_state, TS_BUSY); if (!ISSET(sc->sc_ier, IER_ETXRDY)) { SET(sc->sc_ier, IER_ETXRDY); bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); } n = sc->sc_fifolen; if (n > count) n = count; sc->sc_tba = tp->t_outq.c_cf; while (--n >= 0) { bus_space_write_1(iot, ioh, com_data, *sc->sc_tba++); --count; } sc->sc_tbc = count; goto out; } stopped: if (ISSET(sc->sc_ier, IER_ETXRDY)) { CLR(sc->sc_ier, IER_ETXRDY); bus_space_write_1(iot, ioh, com_ier, sc->sc_ier); } out: splx(s); return; } /* * Stop output on a line. */ int comstop(struct tty *tp, int flag) { int s; struct com_softc *sc = pccom_cd.cd_devs[DEVUNIT(tp->t_dev)]; s = splhigh(); if (ISSET(tp->t_state, TS_BUSY)) { sc->sc_tbc = 0; if (!ISSET(tp->t_state, TS_TTSTOP)) SET(tp->t_state, TS_FLUSH); } splx(s); return 0; } void comdiag(void *arg) { struct com_softc *sc = arg; int overflows; int s; s = spltty(); overflows = sc->sc_overflows; sc->sc_overflows = 0; splx(s); if (overflows) log(LOG_WARNING, "%s: %d silo overflow%s\n", sc->sc_dev.dv_xname, overflows, overflows == 1 ? "" : "s"); } #ifdef PCCOM_DEBUG int maxcc = 0; #endif void comsoft(void) { struct com_softc *sc; struct tty *tp; struct linesw *line; int unit, s, c; u_int rxget; static int lsrmap[8] = { 0, TTY_PE, TTY_FE, TTY_PE|TTY_FE, TTY_FE, TTY_PE|TTY_FE, TTY_FE, TTY_PE|TTY_FE }; for (unit = 0; unit < pccom_cd.cd_ndevs; unit++) { sc = pccom_cd.cd_devs[unit]; if (sc == NULL) continue; tp = sc->sc_tty; /* * XXX only use (tp == NULL) ??? */ if (tp == NULL || !ISSET(tp->t_state, TS_ISOPEN | TS_WOPEN)) continue; line = &linesw[tp->t_line]; /* * XXX where do we _really_ need spltty(), if at all ??? */ s = spltty(); rxget = sc->sc_rxget; while (rxget != sc->sc_rxput) { u_int8_t lsr; lsr = sc->sc_rxbuf[rxget]; rxget = (rxget + 1) & RBUFMASK; if (ISSET(lsr, LSR_RCV_MASK)) { c = sc->sc_rxbuf[rxget]; if (ISSET(lsr, LSR_OE)) { sc->sc_overflows++; if (sc->sc_errors++ == 0) timeout_add(&sc->sc_diag_tmo, 60 * hz); } rxget = (rxget + 1) & RBUFMASK; c |= lsrmap[(lsr & (LSR_BI|LSR_FE|LSR_PE)) >> 2]; line->l_rint(c, tp); } else if (ISSET(lsr, LSR_TXRDY)) { CLR(tp->t_state, TS_BUSY); if (ISSET(tp->t_state, TS_FLUSH)) CLR(tp->t_state, TS_FLUSH); else ndflush(&tp->t_outq, (int)(sc->sc_tba - tp->t_outq.c_cf)); if (sc->sc_halt > 0) wakeup(&tp->t_outq); line->l_start(tp); } else if (lsr == 0) { u_int8_t msr; msr = sc->sc_rxbuf[rxget]; rxget = (rxget + 1) & RBUFMASK; if (ISSET(msr, MSR_DDCD) && !ISSET(sc->sc_swflags, COM_SW_SOFTCAR)) { if (ISSET(msr, MSR_DCD)) line->l_modem(tp, 1); else if (line->l_modem(tp, 0) == 0) { CLR(sc->sc_mcr, sc->sc_dtr); bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_mcr, sc->sc_mcr); } } if (ISSET(msr, MSR_DCTS) && ISSET(msr, MSR_CTS) && ISSET(tp->t_cflag, CRTSCTS)) line->l_start(tp); } } sc->sc_rxget = rxget; /* * XXX this is the place where we could unblock the input */ splx(s); } } #ifdef KGDB /* * If a line break is set, or data matches one of the characters * gdb uses to signal a connection, then start up kgdb. Just gobble * any other data. Done in a stand alone function because comintr * does tty stuff and we don't have one. */ int kgdbintr(void *arg) { struct com_softc *sc = arg; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; u_char lsr, data, msr, delta; if (!ISSET(sc->sc_hwflags, COM_HW_KGDB)) return(0); for (;;) { lsr = bus_space_read_1(iot, ioh, com_lsr); if (ISSET(lsr, LSR_RXRDY)) { do { data = bus_space_read_1(iot, ioh, com_data); if (data == 3 || data == '$' || data == '+' || ISSET(lsr, LSR_BI)) { kgdb_connect(1); data = 0; } lsr = bus_space_read_1(iot, ioh, com_lsr); } while (ISSET(lsr, LSR_RXRDY)); } if (ISSET(lsr, LSR_BI|LSR_FE|LSR_PE|LSR_OE)) printf("weird lsr %02x\n", lsr); msr = bus_space_read_1(iot, ioh, com_msr); if (msr != sc->sc_msr) { delta = msr ^ sc->sc_msr; sc->sc_msr = msr; if (ISSET(delta, MSR_DCD)) { if (!ISSET(sc->sc_swflags, COM_SW_SOFTCAR)) { CLR(sc->sc_mcr, sc->sc_dtr); bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr); } } } if (ISSET(bus_space_read_1(iot, ioh, com_iir), IIR_NOPEND)) return (1); } } #endif /* KGDB */ int comintr(void *arg) { struct com_softc *sc = arg; struct tty *tp = sc->sc_tty; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; u_int8_t lsr, c; u_int rxput; if (!sc->sc_tty) return (0); /* can't do squat. */ if (ISSET(bus_space_read_1(iot, ioh, com_iir), IIR_NOPEND)) return (0); rxput = sc->sc_rxput; do { u_int8_t msr, delta; for (;;) { lsr = bus_space_read_1(iot, ioh, com_lsr); if (!ISSET(lsr, LSR_RCV_MASK)) break; c = bus_space_read_1(iot, ioh, com_data); if (ISSET(lsr, LSR_BI)) { #ifdef DDB if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { if (db_console) Debugger(); continue; } #endif c = 0; } sc->sc_rxbuf[rxput] = lsr; rxput = (rxput + 1) & RBUFMASK; sc->sc_rxbuf[rxput] = c; rxput = (rxput + 1) & RBUFMASK; } msr = bus_space_read_1(iot, ioh, com_msr); delta = msr ^ sc->sc_msr; ttytstamp(tp, sc->sc_msr & MSR_CTS, msr & MSR_CTS, sc->sc_msr & MSR_DCD, msr & MSR_DCD); if (!ISSET(delta, MSR_DCD | MSR_CTS | MSR_RI | MSR_DSR)) continue; sc->sc_msr = msr; /* * stop output straight away if CTS drops and RTS/CTS flowcontrol is used * XXX what about DTR/DCD flowcontrol (ISSET(t_cflag, MDMBUF)) */ msr = (msr & 0xf0) | (delta >> 4); if (ISSET(tp->t_cflag, CRTSCTS) && ISSET(msr, MSR_DCTS)) { if (!ISSET(msr, MSR_CTS)) sc->sc_tbc = 0; } sc->sc_rxbuf[rxput] = 0; rxput = (rxput + 1) & RBUFMASK; sc->sc_rxbuf[rxput] = msr; rxput = (rxput + 1) & RBUFMASK; } while (!ISSET(bus_space_read_1(iot, ioh, com_iir), IIR_NOPEND)); if (ISSET(lsr, LSR_TXRDY)) { if (sc->sc_tbc > 0) { int n; n = sc->sc_fifolen; if (n > sc->sc_tbc) n = sc->sc_tbc; while (--n >= 0) { bus_space_write_1(iot, ioh, com_data, *sc->sc_tba++); --sc->sc_tbc; } } else if (ISSET(tp->t_state, TS_BUSY)) { sc->sc_rxbuf[rxput] = lsr; rxput = (rxput + 1) & RBUFMASK; } } if (sc->sc_rxput != rxput) { /* * XXX * This is the place to do input flow control by dropping RTS or DTR. * However, 115200 bps transfers get maxcc only up to 112 while there's * room for 512 so should we bother ? */ #ifdef PCCOM_DEBUG int cc; cc = rxput - sc->sc_rxget; if (cc < 0) cc += RBUFSIZE; if (cc > maxcc) maxcc = cc; #endif sc->sc_rxput = rxput; setsofttty(); } return 1; } void pccom_xr16850_fifo_init(bus_space_tag_t iot, bus_space_handle_t ioh) { u_int8_t lcr, efr, fctl; lcr = bus_space_read_1(iot, ioh, com_lcr); bus_space_write_1(iot, ioh, com_lcr, LCR_EFR); efr = bus_space_read_1(iot, ioh, com_efr); bus_space_write_1(iot, ioh, com_efr, efr | EFR_ECB); fctl = bus_space_read_1(iot, ioh, com_fctl); bus_space_write_1(iot, ioh, com_fctl, fctl | FCTL_TRIGGER3); bus_space_write_1(iot, ioh, com_lcr, lcr); } /* * Following are all routines needed for PCCOM to act as console */ void comcnprobe(struct consdev *cp) { /* XXX NEEDS TO BE FIXED XXX */ bus_space_tag_t iot = 0; bus_space_handle_t ioh; int found; if (bus_space_map(iot, CONADDR, COM_NPORTS, 0, &ioh)) return; found = comprobe1(iot, ioh); bus_space_unmap(iot, ioh, COM_NPORTS); if (!found) return; /* locate the major number */ for (commajor = 0; commajor < nchrdev; commajor++) if (cdevsw[commajor].d_open == comopen) break; /* initialize required fields */ cp->cn_dev = makedev(commajor, CONUNIT); #if defined(COMCONSOLE) || defined(PCCOMCONSOLE) cp->cn_pri = CN_REMOTE; /* Force a serial port console */ #else cp->cn_pri = CN_NORMAL; #endif } /* * The following functions are polled getc and putc routines, shared * by the console and kgdb glue. */ int com_common_getc(bus_space_tag_t iot, bus_space_handle_t ioh) { int s = splhigh(); u_char stat, c; /* block until a character becomes available */ while (!ISSET(stat = bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY)) continue; c = bus_space_read_1(iot, ioh, com_data); /* clear any interrupts generated by this transmission */ stat = bus_space_read_1(iot, ioh, com_iir); splx(s); return (c); } void com_common_putc(bus_space_tag_t iot, bus_space_handle_t ioh, int c) { int s = splhigh(); int timo; /* wait for any pending transmission to finish */ timo = 150000; while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_TXRDY) && --timo) continue; bus_space_write_1(iot, ioh, com_data, c); /* wait for this transmission to complete */ timo = 1500000; while (!ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_TXRDY) && --timo) continue; splx(s); } /* * Following are all routines needed for COM to act as console */ void comcninit(struct consdev *cp) { #if 0 XXX NEEDS TO BE FIXED XXX comconsiot = ???; #endif #ifdef CONADDR_OVERRIDE comconsaddr = CONADDR; #else const int comports[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; int unit = minor(cp->cn_dev); if (unit >= 0 && unit < 4) comconsaddr = comports[unit]; else comconsaddr = CONADDR; #endif if (bus_space_map(comconsiot, comconsaddr, COM_NPORTS, 0, &comconsioh)) panic("comcninit: mapping failed"); cominit(comconsiot, comconsioh, comdefaultrate); comconsinit = 0; } void cominit(bus_space_tag_t iot, bus_space_handle_t ioh, int rate) { int s = splhigh(); u_int8_t stat; bus_space_write_1(iot, ioh, com_lcr, LCR_DLAB); rate = comspeed(COM_FREQ, rate); /* XXX not comdefaultrate? */ bus_space_write_1(iot, ioh, com_dlbl, rate); bus_space_write_1(iot, ioh, com_dlbh, rate >> 8); bus_space_write_1(iot, ioh, com_lcr, LCR_8BITS); bus_space_write_1(iot, ioh, com_mcr, MCR_DTR | MCR_RTS); bus_space_write_1(iot, ioh, com_ier, IER_ERXRDY | IER_ETXRDY); bus_space_write_1(iot, ioh, com_fifo, FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_4); stat = bus_space_read_1(iot, ioh, com_iir); splx(s); } int comcngetc(dev_t dev) { return (com_common_getc(comconsiot, comconsioh)); } /* * Console kernel output character routine. */ void comcnputc(dev_t dev, int c) { #if 0 /* XXX not needed? */ bus_space_tag_t iot = comconsiot; bus_space_handle_t ioh = comconsioh; if (comconsinit == 0) { cominit(iot, ioh, comdefaultrate); comconsinit = 1; } #endif com_common_putc(comconsiot, comconsioh, c); } void comcnpollc(dev_t dev, int on) { } #ifdef KGDB int com_kgdb_attach(bus_space_tag_t iot, bus_addr_t iobase, int rate, int frequency, tcflag_t cflag) { if (iot == comconsiot && iobase == comconsaddr) { return (EBUSY); /* cannot share with console */ } com_kgdb_iot = iot; com_kgdb_addr = iobase; if (bus_space_map(com_kgdb_iot, com_kgdb_addr, COM_NPORTS, 0, &com_kgdb_ioh)) panic("com_kgdb_attach: mapping failed"); /* XXX We currently don't respect KGDBMODE? */ cominit(com_kgdb_iot, com_kgdb_ioh, rate); kgdb_attach(com_kgdb_getc, com_kgdb_putc, NULL); kgdb_dev = 123; /* unneeded, only to satisfy some tests */ return (0); } /* ARGSUSED */ int com_kgdb_getc(void *arg) { return (com_common_getc(com_kgdb_iot, com_kgdb_ioh)); } /* ARGSUSED */ void com_kgdb_putc(void *arg, int c) { return (com_common_putc(com_kgdb_iot, com_kgdb_ioh, c)); } #endif /* KGDB */