/* $OpenBSD: pcvt_ext.c,v 1.24 1999/11/25 20:24:21 aaron Exp $ */ /* * Copyright (c) 1992, 1995 Hellmuth Michaelis and Joerg Wunsch. * * Copyright (C) 1992, 1993 Soeren Schmidt. * * All rights reserved. * * For the sake of compatibility, portions of this code regarding the * X server interface are taken from Soeren Schmidt's syscons driver. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by * Hellmuth Michaelis, Joerg Wunsch and Soeren Schmidt. * 4. The name authors may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * * @(#)pcvt_ext.c, 3.32, Last Edit-Date: [Tue Oct 3 11:19:48 1995] * */ /*---------------------------------------------------------------------------* * * pcvt_ext.c VT220 Driver Extended Support Routines * ------------------------------------------------------ * * -hm ------------ Release 3.00 -------------- * -hm integrating NetBSD-current patches * -hm applied Onno van der Linden's patch for Cirrus BIOS upgrade * -hm pcvt_x_hook has to care about fkey labels now * -hm changed some bcopyb's to bcopy's * -hm TS_INDEX -> TS_DATA for cirrus (mail from Onno/Charles) * -jw removed kbc_8042(), and replaced by kbd_emulate_pc() * -hm X server patch from John Kohl * -hm applying Joerg's patch for FreeBSD 2.0 * -hm enable 132 col support for Trident TVGA8900CL * -hm applying patch from Joerg fixing Crtat bug * -hm removed PCVT_FAKE_SYSCONS10 * -hm fastscroll/Crtat bugfix from Lon Willett * -hm bell patch from Thomas Eberhardt for NetBSD * -hm multiple X server bugfixes from Lon Willett * -hm patch from John Kohl fixing tsleep bug in usl_vt_ioctl() * -hm bugfix: clear 25th line when switching to a force 24 lines vt * -jw add some forward declarations * -hm fixing MDA re-init when leaving X * -hm patch from John Kohl fixing potential divide by 0 problem * -hm patch from Joerg: console unavailable flag handling * -hm bugfix: unknown cirrus board enables 132 cols * -hm fixing NetBSD PR1123, minor typo (reported by J.T. Conklin) * -hm adding support for Cirrus 5430 chipset * -hm adding NetBSD-current patches from John Kohl * -hm ---------------- Release 3.30 ----------------------- * -hm patch to support Cirrus CL-GD62x5 from Martin * -hm patch to support 132 cols for Cirrus CL-GD62x5 from Martin * -hm patch from Frank van der Linden for keyboard state per VT * -hm patch from Charles Hannum, bugfix of keyboard state switch * -hm implemented KDGKBMODE keyboard ioctl * -hm patch from John Kohl, missing kbd_setmode() in switch_screen() * -hm ---------------- Release 3.32 ----------------------- * *---------------------------------------------------------------------------*/ #include "vt.h" #if NVT > 0 #include "pcvt_hdr.h" /* global include */ static int s3testwritable( void ); static int et4000_col( int ); static int wd90c11_col( int ); static int tri9000_col( int ); static int v7_1024i_col( int ); static int s3_928_col( int ); static int cl_gd542x_col( int ); /* storage to save video timing values of 80 columns text mode */ static union { u_char generic[11]; u_char et4000[11]; u_char wd90c11[12]; u_char tri9000[13]; u_char v7_1024i[17]; u_char s3_928[32]; u_char cirrus[13]; } savearea; static int regsaved = 0; /* registers are saved to savearea */ /*---------------------------------------------------------------------------* * * Find out which video board we are running on, taken from: * Richard Ferraro: Programmers Guide to the EGA and VGA Cards * and from David E. Wexelblat's SuperProbe Version 1.0. * When a board is found, for which 132 column switching is * provided, the global variable "can_do_132col" is set to 1, * also the global variable vga_family is set to what we found. * * ############################################################### * ## THIS IS GETTING MORE AND MORE A LARGE SPAGHETTI HACK !!!! ## * ############################################################### * *---------------------------------------------------------------------------*/ u_char vga_chipset(void) { u_char *ptr; u_char byte, oldbyte, old1byte, newbyte; #if PCVT_132GENERIC can_do_132col = 1; /* assumes everyone can do 132 col */ #else can_do_132col = 0; /* assumes noone can do 132 col */ #endif /* PCVT_132GENERIC */ vga_family = VGA_F_NONE; /*---------------------------------------------------------------------------* * check for Western Digital / Paradise chipsets *---------------------------------------------------------------------------*/ ptr = (u_char *)Crtat; if(color) ptr += (0xc007d - 0xb8000); else ptr += (0xc007d - 0xb0000); if((*ptr++ == 'V') && (*ptr++ == 'G') && (*ptr++ == 'A') && (*ptr++ == '=')) { int wd90c10; vga_family = VGA_F_WD; outb(addr_6845, 0x2b); oldbyte = inb(addr_6845+1); outb(addr_6845+1, 0xaa); newbyte = inb(addr_6845+1); outb(addr_6845+1, oldbyte); if(newbyte != 0xaa) return(VGA_PVGA); /* PVGA1A chip */ outb(TS_INDEX, 0x12); oldbyte = inb(TS_DATA); outb(TS_DATA, oldbyte & 0xbf); newbyte = inb(TS_DATA) & 0x40; if(newbyte != 0) return(VGA_WD90C00); /* WD90C00 chip */ outb(TS_DATA, oldbyte | 0x40); newbyte = inb(TS_DATA) & 0x40; if(newbyte == 0) return(VGA_WD90C00); /* WD90C00 chip */ outb(TS_DATA, oldbyte); wd90c10 = 0; outb(TS_INDEX, 0x10); oldbyte = inb(TS_DATA); outb(TS_DATA, oldbyte & 0xfb); newbyte = inb(TS_DATA) & 0x04; if(newbyte != 0) wd90c10 = 1; outb(TS_DATA, oldbyte | 0x04); newbyte = inb(TS_DATA) & 0x04; if(newbyte == 0) wd90c10 = 1; outb(TS_DATA, oldbyte); if(wd90c10) return(VGA_WD90C10); else { can_do_132col = 1; return(VGA_WD90C11); } } /*---------------------------------------------------------------------------* * check for Trident chipsets *---------------------------------------------------------------------------*/ outb(TS_INDEX, 0x0b); oldbyte = inb(TS_DATA); outb(TS_INDEX, 0x0b); outb(TS_DATA, 0x00); byte = inb(TS_DATA); /* chipset type */ outb(TS_INDEX, 0x0e); old1byte = inb(TS_DATA); outb(TS_DATA, 0); newbyte = inb(TS_DATA); outb(TS_DATA, (old1byte ^ 0x02)); outb(TS_INDEX, 0x0b); outb(TS_DATA, oldbyte); if((newbyte & 0x0f) == 0x02) { /* is a trident chip */ vga_family = VGA_F_TRI; switch(byte) { case 0x01: return(VGA_TR8800BR); case 0x02: return(VGA_TR8800CS); case 0x03: can_do_132col = 1; return(VGA_TR8900B); case 0x04: case 0x13: /* Haven't tried, but should work */ can_do_132col = 1; return(VGA_TR8900C); case 0x23: can_do_132col = 1; return(VGA_TR9000); case 0x33: can_do_132col = 1; return(VGA_TR8900CL); case 0x83: return(VGA_TR9200); case 0x93: return(VGA_TR9100); case 0xe3: can_do_132col = 1; return(VGA_TR9440); case 0xd3: can_do_132col = 1; return(VGA_TR9660); case 0xf3: return(VGA_TR9750); default: return(VGA_TRUNKNOWN); } } /*---------------------------------------------------------------------------* * check for Tseng Labs ET3000/4000 chipsets *---------------------------------------------------------------------------*/ outb(GN_HERCOMPAT, 0x06); if(color) outb(GN_DMCNTLC, 0xa0); else outb(GN_DMCNTLM, 0xa0); /* read old value */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_MISC); oldbyte = inb(ATC_DATAR); /* write new value */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_MISC); newbyte = oldbyte ^ 0x10; outb(ATC_DATAW, newbyte); /* read back new value */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_MISC); byte = inb(ATC_DATAR); /* write back old value */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_MISC); outb(ATC_DATAW, oldbyte); if(byte == newbyte) /* ET3000 or ET4000 */ { vga_family = VGA_F_TSENG; outb(addr_6845, CRTC_EXTSTART); oldbyte = inb(addr_6845+1); newbyte = oldbyte ^ 0x0f; outb(addr_6845+1, newbyte); byte = inb(addr_6845+1); outb(addr_6845+1, oldbyte); if(byte == newbyte) { can_do_132col = 1; return(VGA_ET4000); } else { return(VGA_ET3000); } } /*---------------------------------------------------------------------------* * check for Video7 VGA chipsets *---------------------------------------------------------------------------*/ outb(TS_INDEX, TS_EXTCNTL); /* enable extensions */ outb(TS_DATA, 0xea); outb(addr_6845, CRTC_STARTADRH); oldbyte = inb(addr_6845+1); outb(addr_6845+1, 0x55); newbyte = inb(addr_6845+1); outb(addr_6845, CRTC_V7ID); /* id register */ byte = inb(addr_6845+1); /* read id */ outb(addr_6845, CRTC_STARTADRH); outb(addr_6845+1, oldbyte); outb(TS_INDEX, TS_EXTCNTL); /* disable extensions */ outb(TS_DATA, 0xae); if(byte == (0x55 ^ 0xea)) { /* is Video 7 */ vga_family = VGA_F_V7; outb(TS_INDEX, TS_EXTCNTL); /* enable extensions */ outb(TS_DATA, 0xea); outb(TS_INDEX, TS_V7CHIPREV); byte = inb(TS_DATA); outb(TS_INDEX, TS_EXTCNTL); /* disable extensions */ outb(TS_DATA, 0xae); if(byte < 0xff && byte >= 0x80) return(VGA_V7VEGA); if(byte < 0x7f && byte >= 0x70) return(VGA_V7FWVR); if(byte < 0x5a && byte >= 0x50) return(VGA_V7V5); if(byte < 0x4a && byte > 0x40) { can_do_132col = 1; return(VGA_V71024I); } return(VGA_V7UNKNOWN); } /*---------------------------------------------------------------------------* * check for S3 chipsets *---------------------------------------------------------------------------*/ outb(addr_6845, 0x38); /* reg 1 lock register */ old1byte = inb(addr_6845+1); /* get old value */ outb(addr_6845, 0x38); outb(addr_6845+1, 0x00); /* lock registers */ if(s3testwritable() == 0) /* check if locked */ { outb(addr_6845, 0x38); outb(addr_6845+1, 0x48); /* unlock registers */ if(s3testwritable() == 1 ) /* check if unlocked */ { vga_family = VGA_F_S3; /* FAMILY S3 */ outb(addr_6845, 0x30); /* chip id/rev reg */ byte = inb(addr_6845+1); switch(byte & 0xf0) { case 0x80: switch(byte & 0x0f) { case 0x01: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); return VGA_S3_911; case 0x02: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); return VGA_S3_924; default: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); return VGA_S3_UNKNOWN; } break; case 0xa0: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); return VGA_S3_80x; case 0x90: case 0xb0: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); can_do_132col = 1; return VGA_S3_928; case 0xc0: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); return VGA_S3_864; case 0xd0: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); return VGA_S3_964; case 0xe0: outb(addr_6845, 0x2e); byte = inb(addr_6845+1); switch (byte) { case 0x10: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); return VGA_S3_732; case 0x11: outb(addr_6845, 0x2f); byte = inb(addr_6845+1); outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); if ((byte & 0x40) == 0x40) return VGA_S3_765; else return VGA_S3_764; case 0x31: case 0x3d: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); return VGA_S3_ViRGE; case 0x80: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); return VGA_S3_866; case 0x90: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); return VGA_S3_868; case 0xf0: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); return VGA_S3_968; } default: outb(addr_6845, 0x38); outb(addr_6845+1, old1byte); return VGA_S3_UNKNOWN; } } } /*---------------------------------------------------------------------------* * check for Cirrus chipsets *---------------------------------------------------------------------------*/ outb(TS_INDEX, 6); oldbyte = inb(TS_DATA); outb(TS_INDEX, 6); outb(TS_DATA, 0x12); outb(TS_INDEX, 6); newbyte = inb(TS_DATA); outb(addr_6845, 0x27); byte = inb(addr_6845 + 1); outb(TS_INDEX, 6); outb(TS_DATA, oldbyte); if (newbyte == 0x12) { vga_family = VGA_F_CIR; switch ((byte & 0xfc) >> 2) { case 0x06: can_do_132col = 1; return VGA_CL_GD6225; case 0x22: switch (byte & 3) { case 0: can_do_132col = 1; return VGA_CL_GD5402; case 1: can_do_132col = 1; return VGA_CL_GD5402r1; case 2: can_do_132col = 1; return VGA_CL_GD5420; case 3: can_do_132col = 1; return VGA_CL_GD5420r1; } break; case 0x23: can_do_132col = 1; return VGA_CL_GD5422; case 0x24: can_do_132col = 1; return VGA_CL_GD5426; case 0x25: can_do_132col = 1; return VGA_CL_GD5424; case 0x26: can_do_132col = 1; return VGA_CL_GD5428; case 0x28: case 0x2a: /* GD5434 */ can_do_132col = 1; return VGA_CL_GD5430; } return(VGA_CL_UNKNOWN); } return(VGA_UNKNOWN); } /*--------------------------------------------------------------------------- * test if index 35 lower nibble is writable (taken from SuperProbe 1.0) *---------------------------------------------------------------------------*/ static int s3testwritable(void) { u_char old, new1, new2; outb(addr_6845, 0x35); old = inb(addr_6845+1); /* save */ outb(addr_6845, 0x35); outb(addr_6845+1, (old & 0xf0)); /* write 0 */ outb(addr_6845, 0x35); new1 = (inb(addr_6845+1)) & 0x0f; /* must read 0 */ outb(addr_6845, 0x35); outb(addr_6845+1, (old | 0x0f)); /* write 1 */ outb(addr_6845, 0x35); new2 = (inb(addr_6845+1)) & 0x0f; /* must read 1 */ outb(addr_6845, 0x35); outb(addr_6845+1, old); /* restore */ return((new1==0) && (new2==0x0f)); } /*---------------------------------------------------------------------------* * return ptr to string describing vga type *---------------------------------------------------------------------------*/ char * vga_string(int number) { static char *vga_tab[] = { "generic VGA", "ET4000", "ET3000", "PVGA1A", "WD90C00", "WD90C10", "WD90C11", "Video7 VEGA", "Video7 FAST", "Video7 VER5", "Video7 1024i", "unknown Video7", "TVGA 8800BR", "TVGA 8800CS", "TVGA 8900B", "TVGA 8900C", "TVGA 8900CL", "TVGA 9000", "TVGA 9100", "TVGA 9200", "TVGA 9440", "TVGA 9660", "TVGA 9750 (3DImage)", "unknown Trident", "S3 911", "S3 924", "S3 801/805", "S3 928", "S3 864", "S3 964", "S3 732 (Trio32)", "S3 764 (Trio64)", "S3 866", "S3 868", "S3 968", "S3 765 (Trio64 V+)", "S3 ViRGE", "unknown S3", "CL-GD5402", "CL-GD5402r1", "CL-GD5420", "CL-GD5420r1", "CL-GD5422", "CL-GD5424", "CL-GD5426", "CL-GD5428", "CL-GD5430", "CL-GD62x5", "unknown Cirrus", /* VGA_MAX_CHIPSET */ "vga_string: chipset name table ptr overflow!" }; if(number > VGA_MAX_CHIPSET) /* failsafe */ number = VGA_MAX_CHIPSET; return(vga_tab[number]); } /*---------------------------------------------------------------------------* * toggle vga 80/132 column operation *---------------------------------------------------------------------------*/ int vga_col(struct video_state *svsp, int cols) { int ret = 0; if(adaptor_type != VGA_ADAPTOR) return(0); switch(vga_type) { case VGA_ET4000: ret = et4000_col(cols); break; case VGA_WD90C11: ret = wd90c11_col(cols); break; case VGA_TR8900B: case VGA_TR8900C: case VGA_TR8900CL: case VGA_TR9000: ret = tri9000_col(cols); break; case VGA_V71024I: ret = v7_1024i_col(cols); break; case VGA_S3_928: ret = s3_928_col(cols); break; case VGA_CL_GD5402: case VGA_CL_GD5402r1: case VGA_CL_GD5420: case VGA_CL_GD5420r1: case VGA_CL_GD5422: case VGA_CL_GD5424: case VGA_CL_GD5426: case VGA_CL_GD5428: case VGA_CL_GD5430: case VGA_CL_GD6225: ret = cl_gd542x_col(cols); break; default: #if PCVT_132GENERIC ret = generic_col(cols); #endif /* PCVT_132GENERIC */ break; } if(ret == 0) return(0); /* failed */ svsp->maxcol = cols; return(1); } #if PCVT_132GENERIC /*---------------------------------------------------------------------------* * toggle 80/132 column operation for "generic" SVGAs * NB: this is supposed to work on any (S)VGA as long as the monitor * is able to sync down to 21.5 kHz horizontally. The resulting * vertical frequency is only 50 Hz, so if there is some better board * specific algorithm, we avoid using this generic one. * REPORT ANY FAILURES SO WE CAN IMPROVE THIS *---------------------------------------------------------------------------*/ #if PCVT_EXP_132COL /* * Some improved (i.e. higher scan rates) figures for the horizontal * timing. USE AT YOUR OWN RISK, THIS MIGHT DAMAGE YOUR MONITOR DUE * TO A LOSS OF HORIZONTAL SYNC! * The figures have been tested with an ET3000 board along with a * NEC MultiSync 3D monitor. If you are playing here, consider * testing with several screen pictures (dark background vs. light * background, even enlightening the border color may impact the * result - you can do this e.g. by "scon -p black,42,42,42") * Remember that all horizontal timing values must be dividable * by 8! (The scheme below is taken so that nifty kernel hackers * are able to patch the figures at run-time.) * * The actual numbers result in 23 kHz line scan and 54 Hz vertical * scan. */ #endif /* PCVT_EXP_132COL */ int generic_col(int cols) { u_char *sp; u_char byte; #if !PCVT_EXP_132COL /* stable figures for any multisync monitor that syncs down to 22 kHz*/ static volatile u_short htotal = 1312; static volatile u_short displayend = 1056; static volatile u_short blankstart = 1072; static volatile u_short syncstart = 1112; static volatile u_short syncend = 1280; #else /* PCVT_EXP_132COL */ /* reduced sync-pulse width and sync delays */ static volatile u_short htotal = 1232; static volatile u_short displayend = 1056; static volatile u_short blankstart = 1056; static volatile u_short syncstart = 1104; static volatile u_short syncend = 1168; #endif /* PCVT_EXP_132COL */ vga_screen_off(); /* enable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); byte = inb(addr_6845+1); outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte & 0x7f); if(cols == SCR_COL132) /* switch 80 -> 132 */ { /* save state of board for 80 columns */ if(!regsaved) { regsaved = 1; sp = savearea.generic; outb(addr_6845, 0x00); /* Horizontal Total */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x01); /* Horizontal Display End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x02); /* Horizontal Blank Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x03); /* Horizontal Blank End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x05); /* Horizontal Retrace End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x13); /* Row Offset Register */ *sp++ = inb(addr_6845+1); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ *sp++ = inb(TS_DATA); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Mode control */ outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); *sp++ = inb(ATC_DATAR); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Horizontal Pixel Panning */ outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); *sp++ = inb(ATC_DATAR); *sp++ = inb(GN_MISCOUTR); /* Misc output register */ } /* setup chipset for 132 column operation */ outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, (htotal / 8) - 5); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, (displayend / 8) - 1); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, blankstart / 8); outb(addr_6845, 0x03); /* Horizontal Blank End */ outb(addr_6845+1, ((syncend / 8) & 0x1f) | 0x80); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, syncstart / 8); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, (((syncend / 8) & 0x20) * 4) | ((syncend / 8) & 0x1f)); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, 0x42); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ outb(TS_DATA, 0x01); /* 8 dot char clock */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); /* ATC Mode control */ outb(ATC_DATAW, 0x08); /* Line graphics disable */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); /* ATC Horizontal Pixel Panning */ outb(ATC_DATAW, 0x00); /* Misc output register */ /* use the 28.322 MHz clock */ outb(GN_MISCOUTW, (inb(GN_MISCOUTR) & ~0x0c) | 4); } else /* switch 132 -> 80 */ { if(!regsaved) /* failsafe */ { /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); vga_screen_on(); return(0); } sp = savearea.generic; outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x03); /* Horizontal Blank End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, *sp++); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ outb(TS_DATA, *sp++); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Mode control */ outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); outb(ATC_DATAW, *sp++); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Horizontal Pixel Panning */ outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); outb(ATC_DATAW, *sp++); outb(GN_MISCOUTW, *sp++); /* Misc output register */ } /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); vga_screen_on(); return(1); } #endif /* PCVT_132GENERIC */ /*---------------------------------------------------------------------------* * toggle 80/132 column operation for ET4000 based boards *---------------------------------------------------------------------------*/ int et4000_col(int cols) { u_char *sp; u_char byte; vga_screen_off(); /* enable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); byte = inb(addr_6845+1); outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte & 0x7f); if(cols == SCR_COL132) /* switch 80 -> 132 */ { /* save state of board for 80 columns */ if(!regsaved) { regsaved = 1; sp = savearea.et4000; outb(addr_6845, 0x00); /* Horizontal Total */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x01); /* Horizontal Display End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x02); /* Horizontal Blank Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x05); /* Horizontal Retrace End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x13); /* Row Offset Register */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x34); /* 6845 Compatibility */ *sp++ = inb(addr_6845+1); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ *sp++ = inb(TS_DATA); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Mode control */ outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); *sp++ = inb(ATC_DATAR); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Horizontal Pixel Panning */ outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); *sp++ = inb(ATC_DATAR); *sp++ = inb(GN_MISCOUTR); /* Misc output register */ } /* setup chipset for 132 column operation */ outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, 0x9f); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, 0x83); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, 0x84); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, 0x8b); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, 0x80); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, 0x42); outb(addr_6845, 0x34); /* 6845 Compatibility */ outb(addr_6845+1, 0x0a); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ outb(TS_DATA, 0x01); /* 8 dot char clock */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); /* ATC Mode control */ outb(ATC_DATAW, 0x08); /* Line graphics disable */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); /* ATC Horizontal Pixel Panning */ outb(ATC_DATAW, 0x00); /* Misc output register */ outb(GN_MISCOUTW, (inb(GN_MISCOUTR) & ~0x0c)); } else /* switch 132 -> 80 */ { if(!regsaved) /* failsafe */ { /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); vga_screen_on(); return(0); } sp = savearea.et4000; outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x34); /* 6845 Compatibility */ outb(addr_6845+1, *sp++); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ outb(TS_DATA, *sp++); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Mode control */ outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); outb(ATC_DATAW, *sp++); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Horizontal Pixel Panning */ outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); outb(ATC_DATAW, *sp++); outb(GN_MISCOUTW, *sp++); /* Misc output register */ } /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); vga_screen_on(); return(1); } /*---------------------------------------------------------------------------* * toggle 80/132 column operation for WD/Paradise based boards * * when this card does 132 cols, the char map select register (TS_INDEX, * TS_FONTSEL) function bits get REDEFINED. whoever did design this, * please don't cross my way ever ....... * *---------------------------------------------------------------------------*/ int wd90c11_col(int cols) { #if !PCVT_BACKUP_FONTS static unsigned char *sv_fontwd[NVGAFONTS]; #endif /* !PCVT_BACKUP_FONTS */ u_char *sp; u_char byte; int i; vga_screen_off(); /* enable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); byte = inb(addr_6845+1); outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte & 0x7f); /* enable access to WD/Paradise "control extensions" */ outb(GDC_INDEX, GDC_PR5GPLOCK); outb(GDC_INDEX, 0x05); outb(addr_6845, CRTC_PR10); outb(addr_6845, 0x85); outb(TS_INDEX, TS_UNLOCKSEQ); outb(TS_DATA, 0x48); if(cols == SCR_COL132) /* switch 80 -> 132 */ { /* save state of board for 80 columns */ if(!regsaved) { regsaved = 1; /* save current fonts */ #if !PCVT_BACKUP_FONTS for(i = 0; i < totalfonts; i++) { if(vgacs[i].loaded) { if((sv_fontwd[i] = (u_char *)malloc(32 * 256, M_DEVBUF, M_WAITOK)) == NULL) printf("pcvt: no font buffer\n"); else vga_move_charset(i, sv_fontwd[i], 1); } else { sv_fontwd[i] = 0; } } #endif /* !PCVT_BACKUP_FONTS */ sp = savearea.wd90c11; outb(addr_6845, 0x00); /* Horizontal Total */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x01); /* Horizontal Display End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x02); /* Horizontal Blank Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x03); /* Horizontal Blank End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x05); /* Horizontal Retrace End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x13); /* Row Offset Register */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x2e); /* misc 1 */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x2f); /* misc 2 */ *sp++ = inb(addr_6845+1); outb(TS_INDEX, 0x10);/* Timing Sequencer */ *sp++ = inb(TS_DATA); outb(TS_INDEX, 0x12);/* Timing Sequencer */ *sp++ = inb(TS_DATA); *sp++ = inb(GN_MISCOUTR); /* Misc output register */ } /* setup chipset for 132 column operation */ outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, 0x9c); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, 0x83); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, 0x84); outb(addr_6845, 0x03); /* Horizontal Blank End */ outb(addr_6845+1, 0x9f); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, 0x8a); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, 0x1c); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, 0x42); outb(addr_6845, 0x2e); /* misc 1 */ outb(addr_6845+1, 0x04); outb(addr_6845, 0x2f); /* misc 2 */ outb(addr_6845+1, 0x00); outb(TS_INDEX, 0x10);/* Timing Sequencer */ outb(TS_DATA, 0x21); outb(TS_INDEX, 0x12);/* Timing Sequencer */ outb(TS_DATA, 0x14); outb(GN_MISCOUTW, (inb(GN_MISCOUTR) | 0x08)); /* Misc output register */ vsp->wd132col = 1; } else /* switch 132 -> 80 */ { if(!regsaved) /* failsafe */ { /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); /* disable access to WD/Paradise "control extensions" */ outb(GDC_INDEX, GDC_PR5GPLOCK); outb(GDC_INDEX, 0x00); outb(addr_6845, CRTC_PR10); outb(addr_6845, 0x00); outb(TS_INDEX, TS_UNLOCKSEQ); outb(TS_DATA, 0x00); vga_screen_on(); return(0); } sp = savearea.wd90c11; outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x03); /* Horizontal Blank End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x2e); /* misc 1 */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x2f); /* misc 2 */ outb(addr_6845+1, *sp++); outb(TS_INDEX, 0x10);/* Timing Sequencer */ outb(addr_6845+1, *sp++); outb(TS_INDEX, 0x12);/* Timing Sequencer */ outb(addr_6845+1, *sp++); outb(GN_MISCOUTW, *sp++); /* Misc output register */ vsp->wd132col = 0; } /* restore fonts */ #if !PCVT_BACKUP_FONTS for(i = 0; i < totalfonts; i++) { if(sv_fontwd[i]) vga_move_charset(i, sv_fontwd[i], 0); } #else for(i = 0; i < totalfonts; i++) if(saved_charsets[i]) vga_move_charset(i, 0, 0); #endif /* !PCVT_BACKUP_FONTS */ select_vga_charset(vsp->vga_charset); /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); /* disable access to WD/Paradise "control extensions" */ outb(GDC_INDEX, GDC_PR5GPLOCK); outb(GDC_INDEX, 0x00); outb(addr_6845, CRTC_PR10); outb(addr_6845, 0x00); outb(TS_INDEX, TS_UNLOCKSEQ); outb(TS_DATA, 0x00); vga_screen_on(); return(1); } /*---------------------------------------------------------------------------* * toggle 80/132 column operation for TRIDENT 9000 based boards *---------------------------------------------------------------------------*/ int tri9000_col(int cols) { u_char *sp; u_char byte; vga_screen_off(); /* sync reset is necessary to preserve memory contents ... */ outb(TS_INDEX, TS_SYNCRESET); outb(TS_DATA, 0x01); /* synchronous reset */ /* disable protection of misc out and other regs */ outb(addr_6845, CRTC_MTEST); byte = inb(addr_6845+1); outb(addr_6845, CRTC_MTEST); outb(addr_6845+1, byte & ~0x50); /* enable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); byte = inb(addr_6845+1); outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte & 0x7f); if(cols == SCR_COL132) /* switch 80 -> 132 */ { /* save state of board for 80 columns */ if(!regsaved) { regsaved = 1; sp = savearea.tri9000; outb(addr_6845, 0x00); /* Horizontal Total */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x01); /* Horizontal Display End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x02); /* Horizontal Blank Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x03); /* Horizontal Blank End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x05); /* Horizontal Retrace End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x13); *sp++ = inb(addr_6845+1); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ *sp++ = inb(TS_DATA); outb(TS_INDEX, TS_HWVERS);/* Hardware Version register */ outb(TS_DATA, 0x00); /* write ANYTHING switches to OLD */ outb(TS_INDEX, TS_MODEC2); *sp++ = inb(TS_DATA); outb(TS_INDEX, TS_HWVERS);/* Hardware Version register */ inb(TS_DATA); /* read switches to NEW */ outb(TS_INDEX, TS_MODEC2); *sp++ = inb(TS_DATA); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Mode control */ outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); *sp++ = inb(ATC_DATAR); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Horizontal Pixel Panning */ outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); *sp++ = inb(ATC_DATAR); *sp++ = inb(GN_MISCOUTR); /* Misc output register */ } /* setup chipset for 132 column operation */ outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, 0x9b); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, 0x83); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, 0x84); outb(addr_6845, 0x03); /* Horizontal Blank End */ outb(addr_6845+1, 0x1e); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, 0x87); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, 0x1a); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, 0x42); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ outb(TS_DATA, 0x01); /* 8 dot char clock */ outb(TS_INDEX, TS_HWVERS);/* Hardware Version register */ outb(TS_DATA, 0x00); /* write ANYTHING switches to OLD */ outb(TS_INDEX, TS_MODEC2); outb(TS_DATA, 0x00); outb(TS_INDEX, TS_HWVERS);/* Hardware Version register */ inb(TS_DATA); /* read switches to NEW */ outb(TS_INDEX, TS_MODEC2); outb(TS_DATA, 0x01); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); /* ATC Mode control */ outb(ATC_DATAW, 0x08); /* Line graphics disable */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); /* ATC Horizontal Pixel Panning */ outb(ATC_DATAW, 0x00); outb(GN_MISCOUTW, (inb(GN_MISCOUTR) | 0x0c)); /* Misc output register */ } else /* switch 132 -> 80 */ { if(!regsaved) /* failsafe */ { /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); outb(TS_INDEX, TS_SYNCRESET); outb(TS_DATA, 0x03); /* clear synchronous reset */ vga_screen_on(); return(0); } sp = savearea.tri9000; outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x03); /* Horizontal Blank End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, *sp++); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ outb(TS_DATA, *sp++); outb(TS_INDEX, TS_HWVERS);/* Hardware Version register */ outb(TS_DATA, 0x00); /* write ANYTHING switches to OLD */ outb(TS_INDEX, TS_MODEC2);/* Timing Sequencer */ outb(TS_DATA, *sp++); outb(TS_INDEX, TS_HWVERS);/* Hardware Version register */ inb(TS_DATA); /* read switches to NEW */ outb(TS_INDEX, TS_MODEC2);/* Timing Sequencer */ outb(TS_DATA, *sp++); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Mode control */ outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); outb(ATC_DATAW, *sp++); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Horizontal Pixel Panning */ outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); outb(ATC_DATAW, *sp++); outb(GN_MISCOUTW, *sp++); /* Misc output register */ } /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); outb(TS_INDEX, TS_SYNCRESET); outb(TS_DATA, 0x03); /* clear synchronous reset */ vga_screen_on(); return(1); } /*---------------------------------------------------------------------------* * toggle 80/132 column operation for Video7 VGA 1024i *---------------------------------------------------------------------------*/ int v7_1024i_col(int cols) { u_char *sp; u_char byte; u_char save__byte; vga_screen_off(); /* enable access to first 7 CRTC registers */ /* first, enable read access to vertical retrace start/end */ outb(addr_6845, CRTC_HBLANKE); byte = inb(addr_6845+1); outb(addr_6845, CRTC_HBLANKE); outb(addr_6845+1, (byte | 0x80)); /* second, enable access to protected registers */ outb(addr_6845, CRTC_VSYNCE); save__byte = byte = inb(addr_6845+1); byte |= 0x20; /* no irq 2 */ byte &= 0x6f; /* wr enable, clr irq flag */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); outb(TS_INDEX, TS_EXTCNTL); /* enable extensions */ outb(TS_DATA, 0xea); if(cols == SCR_COL132) /* switch 80 -> 132 */ { /* save state of board for 80 columns */ if(!regsaved) { regsaved = 1; sp = savearea.v7_1024i; outb(addr_6845, 0x00); /* Horizontal Total */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x01); /* Horizontal Display End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x02); /* Horizontal Blank Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x03); /* Horizontal Blank End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x05); /* Horizontal Retrace End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x13); /* Row Offset Register */ *sp++ = inb(addr_6845+1); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ *sp++ = inb(TS_DATA); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Mode control */ outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); *sp++ = inb(ATC_DATAR); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Horizontal Pixel Panning */ outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); *sp++ = inb(ATC_DATAR); outb(TS_INDEX, 0x83); *sp++ = inb(TS_DATA); outb(TS_INDEX, 0xa4); *sp++ = inb(TS_DATA); outb(TS_INDEX, 0xe0); *sp++ = inb(TS_DATA); outb(TS_INDEX, 0xe4); *sp++ = inb(TS_DATA); outb(TS_INDEX, 0xf8); *sp++ = inb(TS_DATA); outb(TS_INDEX, 0xfd); *sp++ = inb(TS_DATA); *sp++ = inb(GN_MISCOUTR); /* Misc output register */ } /* setup chipset for 132 column operation */ outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, 0x9c); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, 0x83); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, 0x86); outb(addr_6845, 0x03); /* Horizontal Blank End */ outb(addr_6845+1, 0x9e); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, 0x89); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, 0x1c); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, 0x42); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ outb(TS_DATA, 0x01); /* 8 dot char clock */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); /* ATC Mode control */ outb(ATC_DATAW, 0x08); /* Line graphics disable */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); /* ATC Horizontal Pixel Panning */ outb(ATC_DATAW, 0x00); outb(TS_INDEX, TS_SYNCRESET); outb(TS_DATA, 0x01); /* synchronous reset */ outb(TS_INDEX, 0x83); outb(TS_DATA, 0xa0); outb(TS_INDEX, 0xa4); outb(TS_DATA, 0x1c); outb(TS_INDEX, 0xe0); outb(TS_DATA, 0x00); outb(TS_INDEX, 0xe4); outb(TS_DATA, 0xfe); outb(TS_INDEX, 0xf8); outb(TS_DATA, 0x1b); outb(TS_INDEX, 0xfd); outb(TS_DATA, 0x33); byte = inb(GN_MISCOUTR); byte |= 0x0c; outb(GN_MISCOUTW, byte); /* Misc output register */ outb(TS_INDEX, TS_SYNCRESET); outb(TS_DATA, 0x03); /* clear synchronous reset */ } else /* switch 132 -> 80 */ { if(!regsaved) /* failsafe */ { outb(TS_INDEX, TS_EXTCNTL); /* disable extensions */ outb(TS_DATA, 0xae); /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); vga_screen_on(); return(0); } sp = savearea.v7_1024i; outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x03); /* Horizontal Blank End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, *sp++); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ outb(TS_DATA, *sp++); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Mode control */ outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); outb(ATC_DATAW, *sp++); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Horizontal Pixel Panning */ outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); outb(ATC_DATAW, *sp++); outb(TS_INDEX, TS_SYNCRESET); outb(TS_DATA, 0x01); /* synchronous reset */ outb(TS_INDEX, 0x83); outb(TS_DATA, *sp++); outb(TS_INDEX, 0xa4); outb(TS_DATA, *sp++); outb(TS_INDEX, 0xe0); outb(TS_DATA, *sp++); outb(TS_INDEX, 0xe4); outb(TS_DATA, *sp++); outb(TS_INDEX, 0xf8); outb(TS_DATA, *sp++); outb(TS_INDEX, 0xfd); outb(TS_DATA, *sp++); outb(GN_MISCOUTW, *sp++); /* Misc output register */ outb(TS_INDEX, TS_SYNCRESET); outb(TS_DATA, 0x03); /* clear synchronous reset */ } outb(TS_INDEX, TS_EXTCNTL); /* disable extensions */ outb(TS_DATA, 0xae); /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, save__byte); vga_screen_on(); return(1); } /*---------------------------------------------------------------------------* * toggle 80/132 column operation for S3 86C928 based boards *---------------------------------------------------------------------------*/ int s3_928_col(int cols) { u_char *sp; u_char byte; vga_screen_off(); outb(addr_6845, 0x38); outb(addr_6845+1, 0x48); /* unlock registers */ outb(addr_6845, 0x39); outb(addr_6845+1, 0xa0); /* unlock registers */ /* enable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); byte = inb(addr_6845+1); outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte & 0x7f); if(cols == SCR_COL132) /* switch 80 -> 132 */ { /* save state of board for 80 columns */ if(!regsaved) { regsaved = 1; sp = savearea.s3_928; outb(addr_6845, 0x00); /* Horizontal Total */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x01); /* Horizontal Display End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x02); /* Horizontal Blank Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x03); /* Horizontal Blank End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x05); /* Horizontal Retrace End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x13); /* Row Offset Register */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x34); /* Backward Compat 3 Reg */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x3b); /* Data Xfer Exec Position */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x42); /* (Clock) Mode Control */ *sp++ = inb(addr_6845+1); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ *sp++ = inb(TS_DATA); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Mode control */ outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); *sp++ = inb(ATC_DATAR); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Horizontal Pixel Panning */ outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); *sp++ = inb(ATC_DATAR); *sp++ = inb(GN_MISCOUTR); /* Misc output register */ } /* setup chipset for 132 column operation */ outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, 0x9a); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, 0x83); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, 0x86); outb(addr_6845, 0x03); /* Horizontal Blank End */ outb(addr_6845+1, 0x9d); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, 0x87); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, 0x1b); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, 0x42); outb(addr_6845, 0x34); outb(addr_6845+1, 0x10);/* enable data xfer pos control */ outb(addr_6845, 0x3b); outb(addr_6845+1, 0x90);/* set data xfer pos value */ outb(addr_6845, 0x42); /* (Clock) Mode Control */ outb(addr_6845+1, 0x02);/* Select 40MHz Clock */ outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ outb(TS_DATA, 0x01); /* 8 dot char clock */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); /* ATC Mode control */ outb(ATC_DATAW, 0x08); /* Line graphics disable */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); /* ATC Horizontal Pixel Panning */ outb(ATC_DATAW, 0x00); /* Misc output register */ outb(GN_MISCOUTW, (inb(GN_MISCOUTR) | 0x0c)); } else /* switch 132 -> 80 */ { if(!regsaved) /* failsafe */ { /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); outb(addr_6845, 0x38); outb(addr_6845+1, 0x00); /* lock registers */ outb(addr_6845, 0x39); outb(addr_6845+1, 0x00); /* lock registers */ vga_screen_on(); return(0); } sp = savearea.s3_928; outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x03); /* Horizontal Blank End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x34); outb(addr_6845+1, *sp++); outb(addr_6845, 0x3b); outb(addr_6845+1, *sp++); outb(addr_6845, 0x42); /* Mode control */ outb(addr_6845+1, *sp++); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ outb(TS_DATA, *sp++); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Mode control */ outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); outb(ATC_DATAW, *sp++); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Horizontal Pixel Panning */ outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); outb(ATC_DATAW, *sp++); outb(GN_MISCOUTW, *sp++); /* Misc output register */ } /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); outb(addr_6845, 0x38); outb(addr_6845+1, 0x00); /* lock registers */ outb(addr_6845, 0x39); outb(addr_6845+1, 0x00); /* lock registers */ vga_screen_on(); return(1); } /*---------------------------------------------------------------------------* * toggle 80/132 column operation for Cirrus Logic 542x based boards *---------------------------------------------------------------------------*/ int cl_gd542x_col(int cols) { u_char *sp; u_char byte; vga_screen_off(); /* enable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); byte = inb(addr_6845+1); outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte & 0x7f); /* enable access to cirrus extension registers */ outb(TS_INDEX, 6); outb(TS_DATA, 0x12); if(cols == SCR_COL132) /* switch 80 -> 132 */ { /* save state of board for 80 columns */ if(!regsaved) { regsaved = 1; sp = savearea.cirrus; outb(addr_6845, 0x00); /* Horizontal Total */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x01); /* Horizontal Display End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x02); /* Horizontal Blank Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x03); /* Horizontal Blank End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x05); /* Horizontal Retrace End */ *sp++ = inb(addr_6845+1); outb(addr_6845, 0x13); /* Row Offset Register */ *sp++ = inb(addr_6845+1); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ *sp++ = inb(TS_DATA); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Mode control */ outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); *sp++ = inb(ATC_DATAR); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Horizontal Pixel Panning */ outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); *sp++ = inb(ATC_DATAR); /* VCLK2 Numerator Register */ outb(TS_INDEX, 0xd); *sp++ = inb(TS_DATA); /* VCLK2 Denominator and Post-Scalar Value Register */ outb(TS_INDEX, 0x1d); *sp++ = inb(TS_DATA); /* Misc output register */ *sp++ = inb(GN_MISCOUTR); } /* setup chipset for 132 column operation */ outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, 0x9f); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, 0x83); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, 0x84); outb(addr_6845, 0x03); /* Horizontal Blank End */ outb(addr_6845+1, 0x82); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, 0x8a); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, 0x9e); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, 0x42); /* set VCLK2 to 41.164 MHz ..... */ outb(TS_INDEX, 0xd); /* VCLK2 Numerator Register */ outb(TS_DATA, 0x45); outb(TS_INDEX, 0x1d); /* VCLK2 Denominator and */ outb(TS_DATA, 0x30); /* Post-Scalar Value Register */ /* and use it. */ outb(GN_MISCOUTW, (inb(GN_MISCOUTR) & ~0x0c) | (2 << 2)); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ outb(TS_DATA, 0x01); /* 8 dot char clock */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); /* ATC Mode control */ outb(ATC_DATAW, 0x08); /* Line graphics disable */ if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); /* ATC Horizontal Pixel Panning */ outb(ATC_DATAW, 0x00); } else /* switch 132 -> 80 */ { if(!regsaved) /* failsafe */ { /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); /* disable access to cirrus extension registers */ outb(TS_INDEX, 6); outb(TS_DATA, 0); vga_screen_on(); return(0); } sp = savearea.cirrus; outb(addr_6845, 0x00); /* Horizontal Total */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x01); /* Horizontal Display End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x02); /* Horizontal Blank Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x03); /* Horizontal Blank End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x04); /* Horizontal Retrace Start */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x05); /* Horizontal Retrace End */ outb(addr_6845+1, *sp++); outb(addr_6845, 0x13); /* Row Offset Register */ outb(addr_6845+1, *sp++); outb(TS_INDEX, TS_MODE);/* Timing Sequencer */ outb(TS_DATA, *sp++); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Mode control */ outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); outb(ATC_DATAW, *sp++); if(color) inb(GN_INPSTAT1C); else inb(GN_INPSTAT1M); /* ATC Horizontal Pixel Panning */ outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); outb(ATC_DATAW, *sp++); /* VCLK2 Numerator Register */ outb(TS_INDEX, 0xd); outb(TS_DATA, *sp++); /* VCLK2 Denominator and Post-Scalar Value Register */ outb(TS_INDEX, 0x1d); outb(TS_DATA, *sp++); outb(GN_MISCOUTW, *sp++); /* Misc output register */ } /* disable access to cirrus extension registers */ outb(TS_INDEX, 6); outb(TS_DATA, 0); /* disable access to first 7 CRTC registers */ outb(addr_6845, CRTC_VSYNCE); outb(addr_6845+1, byte); vga_screen_on(); return(1); } /*---------------------------------------------------------------------------* * switch screen from text mode to X-mode and vice versa *---------------------------------------------------------------------------*/ void switch_screen(int n, int oldgrafx, int newgrafx) { #if PCVT_SCREENSAVER static unsigned saved_scrnsv_tmo = 0; #endif /* PCVT_SCREENSAVER */ #if !PCVT_KBD_FIFO int x; #endif /* !PCVT_KBD_FIFO */ int cols = vsp->maxcol; /* get current col val */ if(n < 0 || n >= totalscreens) return; #if !PCVT_KBD_FIFO x = spltty(); /* protect us */ #endif /* !PCVT_KBD_FIFO */ if(!oldgrafx && newgrafx) { /* switch from text to graphics */ #if PCVT_SCREENSAVER if((saved_scrnsv_tmo = scrnsv_timeout)) pcvt_set_scrnsv_tmo(0); /* screensaver off */ #endif /* PCVT_SCREENSAVER */ } if(!oldgrafx) { /* switch from text mode */ /* video board memory -> kernel memory */ bcopy(vsp->Crtat, vsp->Memory, vsp->screen_rows * vsp->maxcol * CHR); vsp->Crtat = vsp->Memory; /* operate in memory now */ } /* update global screen pointers/variables */ current_video_screen = n; /* current screen no */ pcconsp = vs[n].vs_tty; /* current tty */ vsp = &vs[n]; /* current video state ptr */ if(oldgrafx && !newgrafx) { /* switch from graphics to text mode */ unsigned i; /* restore fonts */ for(i = 0; i < totalfonts; i++) if(saved_charsets[i]) vga_move_charset(i, 0, 0); #if PCVT_SCREENSAVER /* activate screen saver */ if(saved_scrnsv_tmo) pcvt_set_scrnsv_tmo(saved_scrnsv_tmo); #endif /* PCVT_SCREENSAVER */ /* re-initialize lost MDA information */ if(adaptor_type == MDA_ADAPTOR) { /* * Due to the fact that HGC registers are write-only, * the Xserver can only make guesses about the state * the HGC adaptor has been before turning on X mode. * Thus, the display must be re-enabled now, and the * cursor shape and location restored. */ outb(GN_DMCNTLM, 0x28); /* enable display, text mode */ outb(addr_6845, CRTC_CURSORH); /* select high register */ outb(addr_6845+1, ((vsp->Crtat + vsp->cur_offset) - Crtat) >> 8); outb(addr_6845, CRTC_CURSORL); /* select low register */ outb(addr_6845+1, ((vsp->Crtat + vsp->cur_offset) - Crtat)); outb(addr_6845, CRTC_CURSTART); /* select high register */ outb(addr_6845+1, vsp->cursor_start); outb(addr_6845, CRTC_CUREND); /* select low register */ outb(addr_6845+1, vsp->cursor_end); } } if(!newgrafx) { /* to text mode */ /* kernel memory -> video board memory */ bcopy(vsp->Crtat, Crtat, vsp->screen_rows * vsp->maxcol * CHR); vsp->Crtat = Crtat; /* operate on screen now */ outb(addr_6845, CRTC_STARTADRH); outb(addr_6845+1, 0); outb(addr_6845, CRTC_STARTADRL); outb(addr_6845+1, 0); } #if !PCVT_KBD_FIFO splx(x); #endif /* !PCVT_KBD_FIFO */ select_vga_charset(vsp->vga_charset); if(vsp->maxcol != cols) vga_col(vsp, vsp->maxcol); /* select 80/132 columns */ outb(addr_6845, CRTC_CURSORH); /* select high register */ outb(addr_6845+1, vsp->cur_offset >> 8); outb(addr_6845, CRTC_CURSORL); /* select low register */ outb(addr_6845+1, vsp->cur_offset); if(vsp->cursor_on) { outb(addr_6845, CRTC_CURSTART); /* select high register */ outb(addr_6845+1, vsp->cursor_start); outb(addr_6845, CRTC_CUREND); /* select low register */ outb(addr_6845+1, vsp->cursor_end); } else { sw_cursor(0); } if(adaptor_type == VGA_ADAPTOR) { unsigned i; /* switch VGA DAC palette entries */ for(i = 0; i < NVGAPEL; i++) vgapaletteio(i, &vsp->palette[i], 1); } if(!newgrafx) { update_led(); /* update led's */ /* if we switch to a vt with force 24 lines mode and */ /* pure VT emulation and 25 rows charset, then we have */ /* to clear the last line on display ... */ if(vsp->force24 && (vgacs[vsp->vga_charset].screen_size == SIZ_25ROWS)) { fillw(' ', (caddr_t) (vsp->Crtat + vsp->screen_rows * vsp->maxcol), vsp->maxcol); } } kbd_setmode(vsp->kbd_state); } /*---------------------------------------------------------------------------* * Change specified vt to VT_AUTO mode * xxx Maybe this should also reset VT_GRAFX mode; since switching and * graphics modes are not going to work without VT_PROCESS mode. *---------------------------------------------------------------------------*/ static void set_auto_mode (struct video_state *vsx) { unsigned ostatus = vsx->vt_status; vsx->smode.mode = VT_AUTO; vsx->proc = NULL; vsx->pid = 0; vsx->vt_status &= ~(VT_WAIT_REL|VT_WAIT_ACK); if (ostatus & VT_WAIT_ACK) { #if 0 assert (!(ostatus&VT_WAIT_REL)); assert (vsp == vsx && vt_switch_pending == current_video_screen + 1); vt_switch_pending = 0; #else if (vsp == vsx && vt_switch_pending == current_video_screen + 1) vt_switch_pending = 0; #endif } if (ostatus&VT_WAIT_REL) { int new_screen = vt_switch_pending - 1; #if 0 assert(vsp == vsx && vt_switch_pending); vt_switch_pending = 0; vgapage (new_screen); #else if (vsp == vsx && vt_switch_pending) { vt_switch_pending = 0; vgapage (new_screen); } #endif } } /*---------------------------------------------------------------------------* * Exported function; to be called when a vt is closed down. * * Ideally, we would like to be able to recover from an X server crash; * but in reality, if the server crashes hard while in control of the * vga board, then you're not likely to be able to use pcvt ttys * without rebooting. *---------------------------------------------------------------------------*/ void reset_usl_modes (struct video_state *vsx) { /* Clear graphics mode */ if (vsx->vt_status & VT_GRAFX) { vsx->vt_status &= ~VT_GRAFX; if (vsp == vsx) switch_screen(current_video_screen, 1, 0); } /* Take kbd out of raw mode */ if(vsx->kbd_state == K_RAW) { if(vsx == vsp) kbd_setmode(K_XLATE); vsx->kbd_state = K_XLATE; } /* Clear process controlled mode */ set_auto_mode (vsx); } /*---------------------------------------------------------------------------* * switch to virtual screen n (0 ... PCVT_NSCREENS-1) * (the name vgapage() stands for historical reasons) *---------------------------------------------------------------------------*/ int vgapage(int new_screen) { int x; if(new_screen < 0 || new_screen >= totalscreens) return EINVAL; /* fallback to VT_AUTO if controlling processes died */ if(vsp->proc && vsp->proc != pfind(vsp->pid)) set_auto_mode(vsp); if(vs[new_screen].proc && vs[new_screen].proc != pfind(vs[new_screen].pid)) set_auto_mode(&vs[new_screen]); if (!vt_switch_pending && new_screen == current_video_screen) return 0; if(vt_switch_pending && vt_switch_pending != new_screen + 1) { /* Try resignaling uncooperative X-window servers */ if (vsp->smode.mode == VT_PROCESS) { if (vsp->vt_status & VT_WAIT_REL) { if(vsp->smode.relsig) psignal(vsp->proc, vsp->smode.relsig); } else if (vsp->vt_status & VT_WAIT_ACK) { if(vsp->smode.acqsig) psignal(vsp->proc, vsp->smode.acqsig); } } return EAGAIN; } vt_switch_pending = new_screen + 1; if(vsp->smode.mode == VT_PROCESS) { /* we cannot switch immediately here */ vsp->vt_status |= VT_WAIT_REL; if(vsp->smode.relsig) psignal(vsp->proc, vsp->smode.relsig); } else { struct video_state *old_vsp = vsp; switch_screen(new_screen, vsp->vt_status & VT_GRAFX, vs[new_screen].vt_status & VT_GRAFX); x = spltty(); if(old_vsp->vt_status & VT_WAIT_ACT) { old_vsp->vt_status &= ~VT_WAIT_ACT; wakeup((caddr_t)&old_vsp->smode); } if(vsp->vt_status & VT_WAIT_ACT) { vsp->vt_status &= ~VT_WAIT_ACT; wakeup((caddr_t)&vsp->smode); } splx(x); if(vsp->smode.mode == VT_PROCESS) { /* if _new_ vt is under process control... */ vsp->vt_status |= VT_WAIT_ACK; if(vsp->smode.acqsig) psignal(vsp->proc, vsp->smode.acqsig); } else { /* we are committed */ vt_switch_pending = 0; reallocate_scrollbuffer(vsp, scrollback_pages); } } return 0; } /*---------------------------------------------------------------------------* * VT_USL ioctl handling *---------------------------------------------------------------------------*/ int usl_vt_ioctl(Dev_t dev, int cmd, caddr_t data, int flag, struct proc *p) { int i, j, error, opri, mode; struct vt_mode newmode; struct video_state *vsx = &vs[minor(dev)]; switch(cmd) { case VT_SETMODE: newmode = *(struct vt_mode *)data; opri = spltty(); if (newmode.mode != VT_PROCESS) { if (vsx->smode.mode == VT_PROCESS) { if (vsx->proc != p) { splx(opri); return EPERM; } set_auto_mode(vsx); } splx(opri); return 0; } /* * NB: XFree86-3.1.1 does the following: * VT_ACTIVATE (vtnum) * VT_WAITACTIVE (vtnum) * VT_SETMODE (VT_PROCESS) * So it is possible that the screen was switched * between the WAITACTIVE and the SETMODE (here). This * can actually happen quite frequently, and it was * leading to dire consequences. Now it is detected by * requiring that minor(dev) match current_video_screen. * An alternative would be to operate on vs[minor(dev)] * instead of *vsp, but that would leave the server * confused, because it would believe that its vt was * currently activated. */ if (minor(dev) != current_video_screen) { splx(opri); return EPERM; } /* Check for server died */ if(vsp->proc && vsp->proc != pfind(vsp->pid)) set_auto_mode(vsp); /* Check for server already running */ if (vsp->smode.mode == VT_PROCESS && vsp->proc != p) { splx(opri); return EBUSY; /* already in use on this VT */ } vsp->smode = newmode; vsp->proc = p; vsp->pid = p->p_pid; splx(opri); return 0; case VT_GETMODE: *(struct vt_mode *)data = vsp->smode; return 0; case VT_RELDISP: if (minor(dev) != current_video_screen) return EPERM; if (vsp->smode.mode != VT_PROCESS) return EINVAL; if (vsp->proc != p) return EPERM; switch(*(int *)data) { case VT_FALSE: /* process refuses to release screen; abort */ if(vt_switch_pending && (vsp->vt_status & VT_WAIT_REL)) { vsp->vt_status &= ~VT_WAIT_REL; vt_switch_pending = 0; return 0; } break; case VT_TRUE: /* process releases its VT */ if(vt_switch_pending && (vsp->vt_status & VT_WAIT_REL)) { int new_screen = vt_switch_pending - 1; struct video_state *old_vsp = vsp; vsp->vt_status &= ~VT_WAIT_REL; switch_screen(new_screen, vsp->vt_status & VT_GRAFX, vs[new_screen].vt_status & VT_GRAFX); opri = spltty(); if(old_vsp->vt_status & VT_WAIT_ACT) { old_vsp->vt_status &= ~VT_WAIT_ACT; wakeup((caddr_t)&old_vsp->smode); } if(vsp->vt_status & VT_WAIT_ACT) { vsp->vt_status &= ~VT_WAIT_ACT; wakeup((caddr_t)&vsp->smode); } splx(opri); if(vsp->smode.mode == VT_PROCESS) { /* * if the new vt is also in process * mode, we have to wait until its * controlling process acknowledged * the switch */ vsp->vt_status |= VT_WAIT_ACK; if(vsp->smode.acqsig) psignal(vsp->proc, vsp->smode.acqsig); } else { /* we are committed */ vt_switch_pending = 0; } return 0; } break; case VT_ACKACQ: /* new vts controlling process acknowledged */ if(vsp->vt_status & VT_WAIT_ACK) { vt_switch_pending = 0; vsp->vt_status &= ~VT_WAIT_ACK; return 0; } break; } return EINVAL; /* end case VT_RELDISP */ case VT_OPENQRY: /* return free vt */ for(i = 0; i < PCVT_NSCREENS; i++) { if(!vs[i].openf) { *(int *)data = i + 1; return 0; } } return EAGAIN; case VT_GETACTIVE: *(int *)data = current_video_screen + 1; return 0; case VT_ACTIVATE: return vgapage(*(int *)data - 1); case VT_WAITACTIVE: /* sleep until vt switch happened */ i = *(int *)data - 1; if(i != -1 && (i < 0 || i >= PCVT_NSCREENS)) return EINVAL; if(i != -1 && current_video_screen == i) return 0; if(i == -1) { /* xxx Is this what it is supposed to do? */ int x = spltty(); i = current_video_screen; error = 0; while (current_video_screen == i && error == 0) { vs[i].vt_status |= VT_WAIT_ACT; error = tsleep((caddr_t)&vs[i].smode, PZERO | PCATCH, "waitvt", 0); } splx(x); } else { int x = spltty(); error = 0; while (current_video_screen != i && error == 0) { vs[i].vt_status |= VT_WAIT_ACT; error = tsleep((caddr_t)&vs[i].smode, PZERO | PCATCH, "waitvt", 0); } splx(x); } return (error == ERESTART) ? PCVT_ERESTART : error; case KDENABIO: /* * grant the process IO access; only allowed if euid == 0 * and securelevel <= 1. XXX -- this is a fairly serious * hole, but if closed at securelevel 1, would require * options INSECURE in order to use X at all. */ { #if defined(COMPAT_10) || defined(COMPAT_11) || defined(COMPAT_LINUX) struct trapframe *fp = (struct trapframe *)p->p_md.md_regs; #endif if (suser(p->p_ucred, &p->p_acflag) || securelevel > 1) return (EPERM); #if defined(COMPAT_10) || defined(COMPAT_11) || defined(COMPAT_LINUX) /* This is done by i386_iopl(3) now. */ fp->tf_eflags |= PSL_IOPL; #endif return 0; } case KDDISABIO: /* abandon IO access permission */ { #if defined(COMPAT_10) || defined(COMPAT_11) || defined(COMPAT_LINUX) /* This is done by i386_iopl(3) now. */ struct trapframe *fp = (struct trapframe *)p->p_md.md_regs; fp->tf_eflags &= ~PSL_IOPL; #endif return 0; } case KDSETMODE: { int haschanged = 0; if(adaptor_type != VGA_ADAPTOR && adaptor_type != MDA_ADAPTOR) /* X will only run on those adaptors */ return (EINVAL); /* set text/graphics mode of current vt */ switch(*(int *)data) { case KD_TEXT: haschanged = (vsx->vt_status & VT_GRAFX) != 0; vsx->vt_status &= ~VT_GRAFX; if(haschanged && vsx == vsp) switch_screen(current_video_screen, 1, 0); return 0; case KD_GRAPHICS: /* xxx It might be a good idea to require that the vt be in process controlled mode here, and that the calling process is the owner */ haschanged = (vsx->vt_status & VT_GRAFX) == 0; vsx->vt_status |= VT_GRAFX; if(haschanged && vsx == vsp) switch_screen(current_video_screen, 0, 1); return 0; } return EINVAL; /* end case KDSETMODE */ } case KDSETRAD: /* set keyboard repeat and delay */ return kbdioctl(dev, KBDSTPMAT, data, flag); case KDGKBMODE: *(int *)data = vsx->kbd_state; return 0; case KDSKBMODE: mode = *(int *)data; switch(mode) { case K_RAW: case K_XLATE: if(vsx->kbd_state != mode) { if(vsx == vsp) kbd_setmode(mode); vsx->kbd_state = mode; } return 0; } return EINVAL; /* end KDSKBMODE */ case KDMKTONE: /* ring the speaker */ if(data) { int duration = *(int *)data >> 16; int pitch = *(int *)data & 0xffff; if(pitch != 0) { sysbeep(PCVT_SYSBEEPF / pitch, duration * hz / 1000); } } else { sysbeep(PCVT_SYSBEEPF / 1493, hz / 4); } return 0; case KDSETLED: /* set kbd LED status */ /* unfortunately, the LED definitions between pcvt and */ /* USL differ some way :-( */ i = *(int *)data; j = (i & LED_CAP? KBD_CAPSLOCK: 0) + (i & LED_NUM? KBD_NUMLOCK: 0) + (i & LED_SCR? KBD_SCROLLLOCK: 0); return kbdioctl(dev, KBDSLOCK, (caddr_t)&j, flag); case KDGETLED: /* get kbd LED status */ if((error = kbdioctl(dev, KBDGLOCK, (caddr_t)&j, flag))) return error; i = (j & KBD_CAPSLOCK? LED_CAP: 0) + (j & KBD_NUMLOCK? LED_NUM: 0) + (j & KBD_SCROLLLOCK? LED_SCR: 0); *(int *)data = i; return 0; case GIO_KEYMAP: get_usl_keymap((keymap_t *)data); return 0; } /* end case cmd */ return -1; /* inappropriate usl_vt_compat ioctl */ } #endif /* NVT > 0 */ /* ------------------------- E O F ------------------------------------------*/