/* $OpenBSD: biosboot.S,v 1.20 1997/09/05 17:58:49 mickey Exp $ */ /* * Copyright (c) 1997 Michael Shalayeff * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Michael Shalayeff. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ .file "bootbios.S" #include #include #define addr32 .byte 0x67 #define data32 .byte 0x66 #ifdef DEBUG #define BLKCNT 12 /* Max without colliding with the partition table */ #else #define BLKCNT 16 #endif #define BOOTSEG 0x07c0 /* boot loaded here */ #define BOOTSTACK 0xfffc /* stack starts here */ #define ZMAGIC 0x0b01 /* ZMAGIC */ #ifdef DEBUG #define DBGMSG(msg) \ movb $msg, %al; \ .byte 0xe8; \ .word Lchr - . - 2 #define GO_RELOC 'R' /* running relocated code */ #define REAL2PROT 'P' /* switch to protected mode */ #else /* !DEBUG */ #define DBGMSG(msg) /* */ #endif /* !DEBUG */ .text .globl start start: jmp 1f . = start + 3 .asciz "OpenBSD" /* BPB */ . = start + 0x0b bpb: .word DEV_BSIZE /* sector size */ .byte 1 /* sectors/cluster */ .word 0 /* reserved sectors */ .byte 0 /* # of FAT */ .word 0 /* root entries */ .word 0 /* small sectors */ .byte 0xf8 /* media type (hd) */ .word 0 /* sectors/fat */ .word 0 /* sectors per track */ .word 0 /* # of heads */ /* EBPB */ . = start + 0x1c ebpb: .long 16 /* hidden sectors */ .long 0 /* large sectors */ .word 0 /* physical disk */ .byte 0x29 /* signature, needed by NT */ .space 4, 0 /* volume serial number */ .asciz "NO LABEL " .asciz "UFS 4.4" /* boot code */ . = start + 0x3e 1: /* set up stack (%ss:%esp) */ cli /* disable interrupts w/o stack */ # movw $(BOOTREL >> 4), %ax .byte 0xb8 .word BOOTREL >> 4 movl %ax, %ss movl %ax, %es /* relocate there */ data32 movl $BOOTSTACK, %esp sti /* we have stack, do ints */ # movw $BOOTSEG, %ax /* we are here */ .byte 0xb8 .word BOOTSEG movl %ax, %ds xorl %si, %si xorl %di, %di # movw $0x100, %cx /* 512 bytes to move */ .byte 0xb9 .word 0x100 cld rep; movsl /* jump to relocated code */ data32 ljmp $(BOOTREL >> 4), $2f 1: .asciz "loading /boot" 2: DBGMSG(GO_RELOC) nop /* set up %ds */ pushl %cs popl %ds /* set up %es, (where we will load /boot to) */ # movw $(LOADADDR >> 4), %ax .byte 0xb8 .word LOADADDR >> 4 movl %ax, %es #ifdef SERIAL # Initialize the serial port to 9600 baud, 8N1. pushl %dx # movw $0x00e3, %ax .byte 0xb8 .word 0x00e3 # movw SERIAL, %dx .byte 0xba .word SERIAL int $0x14 popl %dx #endif data32 movl $1b, %esi # call Lmessage .byte 0xe8 .word Lmessage - . - 2 data32 xorl %ebx, %ebx /* put it at %es:0 */ addr32 movb _block_count, %cl /* how many to read */ movzbl %cl, %ecx # movw $_block_table, %si .byte 0xbe .word _block_table 1: pushl %cx cld lodsl /* word */ /* cylinder/sector */ movl %ax, %cx lodsb /* head */ movb %al, %dh lodsb /* # of sectors to load */ movb $0x2, %ah pushl %ax int $0x13 jnc 3f /* read error */ data32 movl $2f, %esi jmp 5f 2: .asciz "\r\nRead error\r\n" 3: /* read next block */ movb $'.', %al # call Lchr /* show progress indicator */ .byte 0xe8 .word Lchr - . - 2 popl %ax movzbl %al, %ax shll $9, %ax /* 512 bytes sectors */ addl %ax, %bx popl %cx loop 1b data32 movl $2f, %esi /* new line */ # call Lmessage .byte 0xe8 .word Lmessage - . - 2 xorl %si, %si cld /* check /boot magic */ es;lodsl;es;lodsl /* no need for high word */ # cmpw $ZMAGIC, %ax .byte 0x3d .word ZMAGIC je 3f data32 movl $1f, %esi 5: # call Lmessage .byte 0xe8 .word Lmessage - . - 2 cli hlt 1: .ascii "Bad magic" 2: .asciz "\r\n" 3: #if notdef data32;es;lodsl /* text size */ data32;es;lodsl /* data size */ data32;es;lodsl /* bss size */ data32;es;lodsl /* syms size */ #endif data32 addl 16(%esi), %edi /* entry */ DBGMSG(REAL2PROT) /* change to protected mode */ /* guarantee that interrupts are disabled when in prot mode */ cli /* load the gdtr */ addr32 data32 lgdt Gdtr /* set the PE bit of CR0 */ movl %cr0, %eax data32 orl $CR0_PE, %eax movl %eax, %cr0 /* * make intrasegment jump to flush the processor pipeline and * reload CS register */ data32 ljmp $8, $1f+BOOTREL 1: /* * 32bit mode * set up %ds, %ss, %es */ movw $0x10, %eax movl %ax, %ds movl %ax, %ss movl $BOOTSTACK, %esp #ifdef DEBUG movl $0xb8004, %ebx movl $0x074f0747, (%ebx) #endif movzbl %dl, %eax /* drive number is in the lowest byte */ pushl %eax pushl $BOOTMAGIC /* use some magic */ /* jmp /boot */ ljmp $8, $(LOADADDR + 0x20) /* not reached */ /* * Display string */ Lmessage: data32 pushl %eax cld 1: lodsb # load a byte into %al testb %al, %al jz 1f # call Lchr .byte 0xe8 .word Lchr - . - 2 jmp 1b # # Lchr: write the character in %al to console # Lchr: data32 pushl %eax #ifndef SERIAL data32 pushl %ebx movb $0x0e, %ah xorl %bx, %bx incl %bx /* movw $0x01, %bx */ int $0x10 data32 popl %ebx #else data32 pushl %edx movb $0x01, %ah xorl %dx, %dx movb SERIAL, %dl int $0x14 data32 popl %edx #endif 1: data32 popl %eax ret .align 3 1: /* 0x00 : null */ .long 0, 0 /* 0x08 : flat code */ .word 0xFFFF # lolimit .word 0 # lobase .byte 0 # midbase .byte SDT_MEMERAC | 0 | 0x80 # RWXAC, dpl = 0, present .byte 0xf | 0 | 0x40 | 0x80 # hilimit, xx, 32bit, 4k granularity .byte 0 # hibase /* 0x10 : flat data */ .word 0xFFFF # lolimit .word 0 # lobase .byte 0 # midbase .byte SDT_MEMRWA | 0 | 0x80 # RWA, dpl = 0, present .byte 0xf | 0 | 0x40 | 0x80 # hilimit, xx, 32bit, 4k granularity .byte 0 # hibase Gdtr: .word . - 1b .long BOOTREL + 1b .globl _block_table, _block_count _block_count: .byte BLKCNT /* entries in _block_table */ _block_table: .word 0 /* cylinder/sector */ .byte 0 /* head */ .byte 0 /* nsect */ # . = _block_table + BLKCNT*4 #ifdef BEMBR . = 0x1b8 .space 4, 0 /* NT registry offset from James C. Cortilier III */ . = DOSPARTOFF .globl _partitions /* throw in a partition in case we are block0 as well */ . = DOSPARTOFF .globl _partitions /* throw in a partition in case we are block0 as well */ /* flag, head, sec, cyl, typ, ehead, esect, ecyl, start, len */ _partitions: .byte DOSACTIVE, 0, 1, 0, DOSPTYP_OPENBSD, 255, 255, 255 .long 0,50000 .byte 0,0,0,0,0,0,0,0 .long 0,0 .byte 0,0,0,0,0,0,0,0 .long 0,0 .byte 0,0,0,0,0,0,0,0 .long 0,0 #endif . = 0x200 - 2 /* a little signature */ .word DOSMBR_SIGNATURE