/* $OpenBSD: fpu_arith.h,v 1.2 1996/05/29 21:05:14 niklas Exp $ */ /* $NetBSD: fpu_arith.h,v 1.1 1995/11/03 04:46:59 briggs Exp $ */ /* * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This software was developed by the Computer Systems Engineering group * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and * contributed to Berkeley. * * All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)fpu_arith.h 8.1 (Berkeley) 6/11/93 */ /* * Extended-precision arithmetic. * * We hold the notion of a `carry register', which may or may not be a * machine carry bit or register. On the SPARC, it is just the machine's * carry bit. * * In the worst case, you can compute the carry from x+y as * (unsigned)(x + y) < (unsigned)x * and from x+y+c as * ((unsigned)(x + y + c) <= (unsigned)x && (y|c) != 0) * for example. */ #ifdef sparc /* set up for extended-precision arithemtic */ #define FPU_DECL_CARRY /* * We have three kinds of add: * add with carry: r = x + y + c * add (ignoring current carry) and set carry: c'r = x + y + 0 * add with carry and set carry: c'r = x + y + c * The macros use `C' for `use carry' and `S' for `set carry'. * Note that the state of the carry is undefined after ADDC and SUBC, * so if all you have for these is `add with carry and set carry', * that is OK. * * The same goes for subtract, except that we compute x - y - c. * * Finally, we have a way to get the carry into a `regular' variable, * or set it from a value. SET_CARRY turns 0 into no-carry, nonzero * into carry; GET_CARRY sets its argument to 0 or 1. */ #define FPU_ADDC(r, x, y) \ asm volatile("addx %1,%2,%0" : "=r"(r) : "r"(x), "r"(y)) #define FPU_ADDS(r, x, y) \ asm volatile("addcc %1,%2,%0" : "=r"(r) : "r"(x), "r"(y)) #define FPU_ADDCS(r, x, y) \ asm volatile("addxcc %1,%2,%0" : "=r"(r) : "r"(x), "r"(y)) #define FPU_SUBC(r, x, y) \ asm volatile("subx %1,%2,%0" : "=r"(r) : "r"(x), "r"(y)) #define FPU_SUBS(r, x, y) \ asm volatile("subcc %1,%2,%0" : "=r"(r) : "r"(x), "r"(y)) #define FPU_SUBCS(r, x, y) \ asm volatile("subxcc %1,%2,%0" : "=r"(r) : "r"(x), "r"(y)) #define FPU_GET_CARRY(r) asm volatile("addx %%g0,%%g0,%0" : "=r"(r)) #define FPU_SET_CARRY(v) asm volatile("addcc %0,-1,%%g0" : : "r"(v)) #define FPU_SHL1_BY_ADD /* shift left 1 faster by ADDC than (a<<1)|(b>>31) */ #else /* non sparc */ /* set up for extended-precision arithemtic */ #define FPU_DECL_CARRY quad_t fpu_carry, fpu_tmp; /* * We have three kinds of add: * add with carry: r = x + y + c * add (ignoring current carry) and set carry: c'r = x + y + 0 * add with carry and set carry: c'r = x + y + c * The macros use `C' for `use carry' and `S' for `set carry'. * Note that the state of the carry is undefined after ADDC and SUBC, * so if all you have for these is `add with carry and set carry', * that is OK. * * The same goes for subtract, except that we compute x - y - c. * * Finally, we have a way to get the carry into a `regular' variable, * or set it from a value. SET_CARRY turns 0 into no-carry, nonzero * into carry; GET_CARRY sets its argument to 0 or 1. */ #define FPU_ADDC(r, x, y) \ (r) = (x) + (y) + (!!fpu_carry) #define FPU_ADDS(r, x, y) \ { \ fpu_tmp = (quad_t)(x) + (quad_t)(y); \ (r) = (u_int)fpu_tmp; \ fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \ } #define FPU_ADDCS(r, x, y) \ { \ fpu_tmp = (quad_t)(x) + (quad_t)(y) + (!!fpu_carry); \ (r) = (u_int)fpu_tmp; \ fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \ } #define FPU_SUBC(r, x, y) \ (r) = (x) - (y) - (!!fpu_carry) #define FPU_SUBS(r, x, y) \ { \ fpu_tmp = (quad_t)(x) - (quad_t)(y); \ (r) = (u_int)fpu_tmp; \ fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \ } #define FPU_SUBCS(r, x, y) \ { \ fpu_tmp = (quad_t)(x) - (quad_t)(y) - (!!fpu_carry); \ (r) = (u_int)fpu_tmp; \ fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \ } #define FPU_GET_CARRY(r) (r) = (!!fpu_carry) #define FPU_SET_CARRY(v) fpu_carry = ((v) != 0) #endif