#	$NetBSD: Makefile.mac68k,v 1.25 1995/10/10 03:47:59 briggs Exp $

# Makefile for NetBSD for the mac
#	Derived from makefile for hp300 from NetBSD
#
# This makefile is constructed from a machine description:
#	config machineid
# Most changes should be made in the machine description
#	/sys/conf/``machineid''
# after which you should do
#	 config machineid
# Machine generic makefile changes should be made in
#	/sys/conf/Makefile.``machinetype''
# after which config should be rerun for all machines of that type.
#
# N.B.: NO DEPENDENCIES ON FOLLOWING FLAGS ARE VISIBLE TO MAKEFILE
#	IF YOU CHANGE THE DEFINITION OF ANY OF THESE RECOMPILE EVERYTHING
#
# -DTRACE	compile in kernel tracing hooks
# -DQUOTA	compile in file system quotas

# DEBUG is set to -g by "makeoptions DEBUG=-g"
# PROF is set to -pg by config if profiling is requested (config -p).
AS=	/usr/bin/as ${DEBUG}
CC=	/usr/bin/cc ${DEBUG}
LOCAL_CC=${CC}
CPP=	/usr/bin/cpp
LD=	/usr/bin/ld
TOUCH=	touch -f -c
GPROF.EX=/usr/src/lib/libc/csu.mac68k/gmon.ex

# source tree is located via $S relative to the compilation directory
S=	../../../..
MAC68K=	../..

INCLUDES= -I. -I$S/arch -I$S -I$S/sys
COPTS=	${INCLUDES} ${IDENT} -D_KERNEL -DREFBIT -Dmac68k
CFLAGS=	-O -Werror ${COPTS}

### Find out what to use for libkern.
.include "$S/lib/libkern/Makefile.inc"
.ifndef PROF
LIBKERN=${KERNLIB}
.else
LIBKERN=${KERNLIB_PROF}
.endif

### Find out what to use for libcompat.
.include "$S/compat/common/Makefile.inc"
.ifndef PROF
LIBCOMPAT=${COMPATLIB}
.else
LIBCOMPAT=${COMPATLIB_PROF}
.endif

### for the Motorola 68040 Floating Point Software Product
.include "$S/arch/m68k/fpsp/Makefile.inc"

# compile rules: rules are named ${TYPE}_${SUFFIX}${CONFIG_DEP}
# where TYPE is NORMAL, DRIVER, or PROFILE}; SUFFIX is the file suffix,
# capitalized (e.g. C for a .c file), and CONFIG_DEP is _C if the file
# is marked as config-dependent.

NORMAL_C=	${CC} -c ${CFLAGS} ${PROF} $<
NORMAL_C_C=	${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<

DRIVER_C=	${CC} -c ${CFLAGS} ${PROF} $<
DRIVER_C_C=	${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<

PROFILE_C=	${CC} -S -c ${COPTS} $<; \
		ex - $*.s < ${GPROF.EX}; \
		${AS} -o $@ $*.s; \
		rm -f $*.s

# This really bites for now, but we need to run assembly through sed
# until the real problem (cpp, I think) is fixed.
NORMAL_S=	${CPP} ${COPTS} $< | ${AS} -o $@
NORMAL_S_C=	${CPP} ${COPTS} ${PARAM} $< | ${AS} -o $@

%OBJS

%CFILES

# load lines for config "xxx" will be emitted as:
# xxx: ${SYSTEM_DEP} swapxxx.o
#	${SYSTEM_LD_HEAD}
#	${SYSTEM_LD} swapxxx.o
#	${SYSTEM_LD_TAIL}
SYSTEM_OBJ=	locore.o vnode_if.o ${OBJS} param.o ioconf.o conf.o \
		${FPSP} ${LIBKERN} ${LIBCOMPAT}
SYSTEM_DEP=	Makefile ${SYSTEM_OBJ}
SYSTEM_LD_HEAD=	@echo loading $@; rm -f $@
SYSTEM_LD=	@strip=-x; [ X${DEBUG} = X-g ] && strip=-X || true; \
		${LD} $$strip -n -T 0 -e start -o $@ \
		${SYSTEM_OBJ} vers.o
SYSTEM_LD_TAIL=	@chmod 755 $@; size $@; \
		[ X${DEBUG} = X-g ] && { \
		echo cp $@ $@.gdb; rm -f $@.gdb; cp $@ $@.gdb; \
		echo strip -d $@; strip -d $@; } || true

%LOAD

newvers:
	sh $S/conf/newvers.sh "${KERN_IDENT}" ${IDENT}
	${CC} ${CFLAGS} -c vers.c

clean::
	rm -f eddep netbsd tags *.o locore.i [a-z]*.s \
		Errs errs linterrs makelinks

lint: /tmp param.c
	@lint -hbxn -DGENERIC -Dvolatile= ${COPTS} ${PARAM} -UKGDB \
	    ${MAC68K}/mac68k/Locore.c ${CFILES} \
	    ioconf.c param.c| \
	    grep -v 'struct/union .* never defined' | \
	    grep -v 'possible pointer alignment problem'

symbols.sort: ${MAC68K}/mac68k/symbols.raw
	grep -v '^#' ${MAC68K}/mac68k/symbols.raw \
	    | sed 's/^	//' | sort -u > symbols.sort

locore.o: assym.s ${MAC68K}/mac68k/vectors.s ${MAC68K}/mac68k/macglobals.s
locore.o: ${MAC68K}/mac68k/locore.s 
locore.o: ${MAC68K}/include/trap.h ${MAC68K}/include/psl.h
locore.o: ${MAC68K}/include/pte.h ${MAC68K}/include/cpu.h
	${CPP} -DLOCORE ${COPTS} ${MAC68K}/mac68k/locore.s | ${AS} -o locore.o

# the following is necessary because autoconf.o depends on #if GENERIC
autoconf.o: Makefile

# the following are necessary because the files depend on the types of
# hp cpu's included in the system configuration
clock.o machdep.o autoconf.o conf.o: Makefile

# depend on network configuration
af.o uipc_proto.o locore.o: Makefile

# depend on maxusers
assym.s: Makefile

assym.s: genassym
	./genassym >assym.s

genassym: ${MAC68K}/mac68k/genassym.c
	${LOCAL_CC} ${INCLUDES} ${IDENT} -D_KERNEL ${PARAM} -o genassym \
	    ${MAC68K}/mac68k/genassym.c

depend: assym.s param.c vnode_if.h
	mkdep ${COPTS} ${CFILES} ioconf.c param.c
	mkdep -a -p ${INCLUDES} ${IDENT} ${PARAM} ${MAC68K}/mac68k/genassym.c

links:
	egrep '#if' ${CFILES} | sed -f $S/conf/defines | \
	  sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink
	echo ${CFILES} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \
	  sort -u | comm -23 - dontlink | \
	  sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks
	sh makelinks && rm -f dontlink

tags:
	@echo "see $S/kern/Makefile for tags"

ioconf.o: ioconf.c
	${CC} -c ${CFLAGS} ioconf.c

conf.o: ${MAC68K}/mac68k/conf.c
	${NORMAL_C}

param.c: $S/conf/param.c
	rm -f param.c
	cp $S/conf/param.c .

param.o: param.c Makefile
	${CC} -c ${CFLAGS} ${PARAM} -DHZ=60 param.c

vnode_if.c vnode_if.h:  $S/kern/vnode_if.sh $S/kern/vnode_if.src
	AWK="${AWK}" sh $S/kern/vnode_if.sh $S/kern/vnode_if.src

%RULES