/* $OpenBSD: esp.c,v 1.14 2001/07/04 08:52:44 niklas Exp $ */ /* $NetBSD: esp.c,v 1.59 1996/10/13 02:59:48 christos Exp $ */ /* * Copyright (c) 1997 Jason R. Thorpe. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project * by Jason R. Thorpe. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1994 Peter Galbavy * Copyright (c) 1995 Paul Kranenburg * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Peter Galbavy * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Based on aic6360 by Jarle Greipsland * * Acknowledgements: Many of the algorithms used in this driver are * inspired by the work of Julian Elischer (julian@tfs.com) and * Charles Hannum (mycroft@duality.gnu.ai.mit.edu). Thanks a million! */ /* * Initial m68k mac support from Allen Briggs * (basically consisting of the match, a bit of the attach, and the * "DMA" glue functions). */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include void espattach __P((struct device *, struct device *, void *)); int espmatch __P((struct device *, void *, void *)); /* Linkup to the rest of the kernel */ struct cfattach esp_ca = { sizeof(struct esp_softc), espmatch, espattach }; struct scsi_adapter esp_switch = { ncr53c9x_scsi_cmd, minphys, /* no max at this level; handled by DMA code */ NULL, NULL, }; struct scsi_device esp_dev = { NULL, /* Use default error handler */ NULL, /* have a queue, served by this */ NULL, /* have no async handler */ NULL, /* Use default 'done' routine */ }; /* * Functions and the switch for the MI code. */ u_char esp_read_reg __P((struct ncr53c9x_softc *, int)); void esp_write_reg __P((struct ncr53c9x_softc *, int, u_char)); int esp_dma_isintr __P((struct ncr53c9x_softc *)); void esp_dma_reset __P((struct ncr53c9x_softc *)); int esp_dma_intr __P((struct ncr53c9x_softc *)); int esp_dma_setup __P((struct ncr53c9x_softc *, caddr_t *, size_t *, int, size_t *)); void esp_dma_go __P((struct ncr53c9x_softc *)); void esp_dma_stop __P((struct ncr53c9x_softc *)); int esp_dma_isactive __P((struct ncr53c9x_softc *)); struct ncr53c9x_glue esp_glue = { esp_read_reg, esp_write_reg, esp_dma_isintr, esp_dma_reset, esp_dma_intr, esp_dma_setup, esp_dma_go, esp_dma_stop, esp_dma_isactive, NULL, /* gl_clear_latched_intr */ }; int espmatch(parent, vcf, aux) struct device *parent; void *vcf, *aux; { struct cfdata *cf = vcf; if ((cf->cf_unit == 0) && mac68k_machine.scsi96) return (1); if ((cf->cf_unit == 1) && mac68k_machine.scsi96_2) return (1); return (0); } /* * Attach this instance, and then all the sub-devices */ void espattach(parent, self, aux) struct device *parent, *self; void *aux; { extern vm_offset_t SCSIBase; struct esp_softc *esc = (void *)self; struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x; /* * Set up the glue for MI code early; we use some of it here. */ sc->sc_glue = &esp_glue; /* * Save the regs */ if (sc->sc_dev.dv_unit == 0) { unsigned long reg_offset; esc->sc_reg = (volatile u_char *) SCSIBase; via2_register_irq(VIA2_SCSIIRQ, (void (*)(void *))ncr53c9x_intr, esc); esc->irq_mask = V2IF_SCSIIRQ; reg_offset = SCSIBase - IOBase; if (reg_offset == 0x10000) { sc->sc_freq = 16500000; } else { sc->sc_freq = 25000000; } } else { esc->sc_reg = (volatile u_char *) SCSIBase + 0x402; via2_register_irq(VIA2_SCSIDRQ, (void (*)(void *))ncr53c9x_intr, esc); esc->irq_mask = V2IF_SCSIDRQ; /* V2IF_T1? */ sc->sc_freq = 25000000; } printf(": address %p", esc->sc_reg); sc->sc_id = 7; /* gimme Mhz */ sc->sc_freq /= 1000000; /* * It is necessary to try to load the 2nd config register here, * to find out what rev the esp chip is, else the esp_reset * will not set up the defaults correctly. */ sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB; sc->sc_cfg2 = NCRCFG2_SCSI2; sc->sc_cfg3 = 0; sc->sc_rev = NCR_VARIANT_NCR53C96; /* * This is the value used to start sync negotiations * Note that the NCR register "SYNCTP" is programmed * in "clocks per byte", and has a minimum value of 4. * The SCSI period used in negotiation is one-fourth * of the time (in nanoseconds) needed to transfer one byte. * Since the chip's clock is given in MHz, we have the following * formula: 4 * period = (1000 / freq) * 4 */ sc->sc_minsync = 1000 / sc->sc_freq; sc->sc_minsync = 0; /* No synchronous xfers w/o DMA */ /* Really no limit, but since we want to fit into the TCR... */ sc->sc_maxxfer = 64 * 1024; /* * Now try to attach all the sub-devices */ ncr53c9x_attach(sc, &esp_switch, &esp_dev); /* * Configure interrupts. */ via2_reg(vPCR) = 0x22; via2_reg(vIFR) = esc->irq_mask; via2_reg(vIER) = 0x80 | esc->irq_mask; } /* * Glue functions. */ u_char esp_read_reg(sc, reg) struct ncr53c9x_softc *sc; int reg; { struct esp_softc *esc = (struct esp_softc *)sc; return esc->sc_reg[reg * 16]; } void esp_write_reg(sc, reg, val) struct ncr53c9x_softc *sc; int reg; u_char val; { struct esp_softc *esc = (struct esp_softc *)sc; u_char v = val; if (reg == NCR_CMD && v == (NCRCMD_TRANS|NCRCMD_DMA)) { v = NCRCMD_TRANS; } esc->sc_reg[reg * 16] = v; } int esp_dma_isintr(sc) struct ncr53c9x_softc *sc; { struct esp_softc *esc = (struct esp_softc *)sc; return esc->sc_reg[NCR_STAT * 16] & 0x80; } void esp_dma_reset(sc) struct ncr53c9x_softc *sc; { struct esp_softc *esc = (struct esp_softc *)sc; esc->sc_active = 0; esc->sc_tc = 0; } int esp_dma_intr(sc) struct ncr53c9x_softc *sc; { register struct esp_softc *esc = (struct esp_softc *)sc; register u_char *p; volatile u_char *cmdreg, *intrreg, *statreg, *fiforeg; register u_int espphase, espstat, espintr; register int cnt; if (esc->sc_active == 0) { printf("dma_intr--inactive DMA\n"); return -1; } if ((sc->sc_espintr & NCRINTR_BS) == 0) { esc->sc_active = 0; return 0; } cnt = *esc->sc_pdmalen; if (*esc->sc_pdmalen == 0) { printf("data interrupt, but no count left."); } p = *esc->sc_dmaaddr; espphase = sc->sc_phase; espstat = (u_int) sc->sc_espstat; espintr = (u_int) sc->sc_espintr; cmdreg = esc->sc_reg + NCR_CMD * 16; fiforeg = esc->sc_reg + NCR_FIFO * 16; statreg = esc->sc_reg + NCR_STAT * 16; intrreg = esc->sc_reg + NCR_INTR * 16; do { if (esc->sc_datain) { *p++ = *fiforeg; cnt--; if (espphase == DATA_IN_PHASE) { *cmdreg = NCRCMD_TRANS; } else { esc->sc_active = 0; } } else { if ( (espphase == DATA_OUT_PHASE) || (espphase == MESSAGE_OUT_PHASE)) { *fiforeg = *p++; cnt--; *cmdreg = NCRCMD_TRANS; } else { esc->sc_active = 0; } } if (esc->sc_active) { while (!(*statreg & 0x80)); espstat = *statreg; espintr = *intrreg; espphase = (espintr & NCRINTR_DIS) ? /* Disconnected */ BUSFREE_PHASE : espstat & PHASE_MASK; } } while (esc->sc_active && (espintr & NCRINTR_BS)); sc->sc_phase = espphase; sc->sc_espstat = (u_char) espstat; sc->sc_espintr = (u_char) espintr; *esc->sc_dmaaddr = p; *esc->sc_pdmalen = cnt; if (*esc->sc_pdmalen == 0) { esc->sc_tc = NCRSTAT_TC; } sc->sc_espstat |= esc->sc_tc; return 0; } int esp_dma_setup(sc, addr, len, datain, dmasize) struct ncr53c9x_softc *sc; caddr_t *addr; size_t *len; int datain; size_t *dmasize; { struct esp_softc *esc = (struct esp_softc *)sc; esc->sc_dmaaddr = addr; esc->sc_pdmalen = len; esc->sc_datain = datain; esc->sc_dmasize = *dmasize; esc->sc_tc = 0; return 0; } void esp_dma_go(sc) struct ncr53c9x_softc *sc; { struct esp_softc *esc = (struct esp_softc *)sc; if (esc->sc_datain == 0) { esc->sc_reg[NCR_FIFO * 16] = **esc->sc_dmaaddr; (*esc->sc_pdmalen)--; (*esc->sc_dmaaddr)++; } esc->sc_active = 1; } void esp_dma_stop(sc) struct ncr53c9x_softc *sc; { } int esp_dma_isactive(sc) struct ncr53c9x_softc *sc; { struct esp_softc *esc = (struct esp_softc *)sc; return esc->sc_active; }