/* $OpenBSD: if_aereg.h,v 1.7 2005/03/04 00:38:37 martin Exp $ */ /* $NetBSD: if_aereg.h,v 1.14 1997/02/24 07:34:20 scottr Exp $ */ /* * National Semiconductor DS8390 NIC register definitions. * * Copyright (C) 1993, David Greenman. This software may be used, modified, * copied, distributed, and sold, in both source and binary form provided that * the above copyright and these terms are retained. Under no circumstances is * the author responsible for the proper functioning of this software, nor does * the author assume any responsibility for damages incurred with its use. */ /* * The following is a structure that we should be pulling from * dev/ic/dp8390reg.h, but since we have the card in x86 mode and * the std. include file assumes that big-endian processors will * have the card in m68k mode, we're hosed for the moment. * Fix this. -- XXX */ struct ae_ring { u_char rsr; /* receiver status */ u_char next_packet; /* pointer to next packet */ u_short count; /* bytes in packet (length + 4) */ }; /* * Vendor types */ #define AE_VENDOR_UNKNOWN 0xff /* Unknown network card */ #define AE_VENDOR_APPLE 0x00 /* Apple Ethernet card */ #define AE_VENDOR_INTERLAN 0x01 /* Interlan A310 card (GatorCard) */ #define AE_VENDOR_DAYNA 0x02 /* DaynaPORT E/30s (and others?) */ #define AE_VENDOR_ASANTE 0x03 /* Asante MacCon II/E */ #define AE_VENDOR_FARALLON 0x04 /* Farallon EtherMac II-TP */ #define AE_VENDOR_FOCUS 0x05 /* FOCUS Enhancements EtherLAN */ #define AE_VENDOR_KINETICS 0x06 /* Kinetics EtherPort SE/30 */ #define AE_VENDOR_CABLETRON 0x07 /* Cabletron Ethernet */ /* * Compile-time config flags */ /* * This sets the default for enabling/disablng the transceiver. */ #define AE_FLAGS_DISABLE_TRANSCEIVER 0x0001 /* * This disables the use of double transmit buffers. */ #define AE_FLAGS_NO_DOUBLE_BUFFERING 0x0008 /* */ #define GC_RESET_OFFSET 0x000c0000 /* writes here reset NIC */ #define GC_ROM_OFFSET 0x000c0000 /* address prom */ #define GC_DATA_OFFSET 0x000d0000 /* Offset to NIC memory */ #define GC_REG_OFFSET 0x000e0000 /* Offset to NIC registers */ #define DP_ROM_OFFSET 0x000f0007 /* Offset to MAC address */ #define DP_DATA_OFFSET 0x00000000 /* Offset to NIC memory */ #define DP_REG_OFFSET 0x00080000 /* Offset to NIC registers */ #define AE_ROM_OFFSET 0x000f0000 #define AE_DATA_OFFSET 0x000d0000 /* Offset to NIC memory */ #define AE_REG_OFFSET 0x000e0000 /* Offset to NIC registers */ #define FE_ROM_OFFSET 0x000d0006 /* Determined empirically */ #define KE_ROM_OFFSET 0x000f0007 #define KE_DATA_OFFSET 0x00000000 /* Offset to NIC memory */ #define KE_REG_OFFSET 0x00080003 /* Offset to NIC registers */ #define AE_REG_SIZE 0x40 /* Size of register space */