/*	$OpenBSD: pm_direct.c,v 1.5 2002/03/14 01:26:35 millert Exp $	*/
/*  pm_direct.c 1.22 01/09/97 Takashi Hamada */

/*
 * Copyright (C) 1997 Takashi Hamada
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *  This product includes software developed by Takashi HAMADA
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */


/* #define	PM_DEBUG	1 */
/* #define	PM_GRAB_SI	1 */

#include <sys/types.h>
#include <sys/cdefs.h>
#include <sys/systm.h>
#include <sys/time.h>

#include <machine/adbsys.h>
#include <machine/cpu.h>
#include <machine/param.h>
#include <machine/viareg.h>

#include <arch/mac68k/mac68k/macrom.h>
#include <arch/mac68k/dev/adbvar.h>

#include "pm_direct.h"

/* hardware dependent values */
extern u_short ADBDelay;
extern u_int32_t HwCfgFlags3;

/* define the types of the Power Manager */
#define PM_HW_UNKNOWN		0x00	/* don't know */
#define PM_HW_PB1XX		0x01	/* PowerBook 1XX series */
#define	PM_HW_PB5XX		0x02	/* PowerBook Duo and 5XX series */

/* useful macros */
#define PM_SR()			via_reg(VIA1, vSR)
#define PM_VIA_INTR_ENABLE()	via_reg(VIA1, vIER) = 0x90
#define PM_VIA_INTR_DISABLE()	via_reg(VIA1, vIER) = 0x10
#define PM_VIA_CLR_INTR()	via_reg(VIA1, vIFR) = 0x90
#define PM_SET_STATE_ACKON()	via_reg(VIA2, vBufB) |= 0x04
#define PM_SET_STATE_ACKOFF()	via_reg(VIA2, vBufB) &= ~0x04
#define PM_IS_ON		( 0x02 == (via_reg(VIA2, vBufB) & 0x02) )
#define PM_IS_OFF		( 0x00 == (via_reg(VIA2, vBufB) & 0x02) )

/* 
 * Valiables for internal use
 */
int	pmHardware = PM_HW_UNKNOWN;
u_short	pm_existent_ADB_devices = 0x0;	/* each bit expresses the existent ADB device */
u_int	pm_LCD_brightness = 0x0;
u_int	pm_LCD_contrast = 0x0;
u_int	pm_counter = 0;			/* clock count */

/* these values shows that number of data returned after 'send' cmd is sent */
char pm_send_cmd_type[] = {
	0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
	0x01,0x01,0xff,0xff,0xff,0xff,0xff,0xff, 0x00,0x00,0xff,0xff,0xff,0xff,0xff,0x00,
	0xff,0x00,0x02,0x01,0x01,0xff,0xff,0xff, 0x00,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
	0x04,0x14,0xff,0xff,0xff,0xff,0xff,0xff, 0x00,0x00,0x02,0xff,0xff,0xff,0xff,0xff,
	0x01,0x01,0xff,0xff,0xff,0xff,0xff,0xff, 0x00,0x00,0xff,0xff,0xff,0xff,0xff,0xff,
	0x01,0x00,0x02,0x02,0xff,0x01,0x03,0x01, 0x00,0x01,0x00,0x00,0x00,0xff,0xff,0xff,
	0x02,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0xff,
	0x01,0x01,0x01,0xff,0xff,0xff,0xff,0xff, 0x00,0x00,0xff,0xff,0xff,0xff,0x04,0x04,
	0x04,0xff,0x00,0xff,0xff,0xff,0xff,0xff, 0x00,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
	0x01,0x02,0xff,0xff,0xff,0xff,0xff,0xff, 0x00,0x00,0xff,0xff,0xff,0xff,0xff,0xff,
	0x02,0x02,0x02,0x04,0xff,0x00,0xff,0xff, 0x01,0x01,0x03,0x02,0xff,0xff,0xff,0xff,
	0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
	0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
	0x00,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0x01,0x01,0xff,0xff,0x00,0x00,0xff,0xff,
	0xff,0x04,0x00,0xff,0xff,0xff,0xff,0xff, 0x03,0xff,0x00,0xff,0x00,0xff,0xff,0x00,
	0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff
};

/* these values shows that number of data returned after 'receive' cmd is sent */
char pm_receive_cmd_type[] = {
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x02,0x02,0xff,0xff,0xff,0xff,0xff,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x05,0x15,0xff,0xff,0xff,0xff,0xff,0xff,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x02,0x02,0xff,0xff,0xff,0xff,0xff,0xff,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x02,0x00,0x03,0x03,0xff,0xff,0xff,0xff,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x04,0x04,0x03,0x09,0xff,0xff,0xff,0xff,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0xff,0xff,0xff,0xff,0xff,0xff,0x01,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x06,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x02,0x02,0xff,0xff,0xff,0xff,0xff,0xff,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x02,0x00,0x00,0x00,0xff,0xff,0xff,0xff,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x02,0x02,0xff,0xff,0x02,0xff,0xff,0xff,
	0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00, 0xff,0xff,0x02,0xff,0xff,0xff,0xff,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
};


/*
 * Define the private functions
 */

/* for debugging */
#ifdef PM_DEBUG
void pm_printerr( char *, int, int, char * );
#endif

int pm_wait_busy(int);
int pm_wait_free(int);

/* these functions are for the PB1XX series */
int pm_receive_pm1(u_char *);
int pm_send_pm1(u_char,int);
int pm_pmgrop_pm1(PMData *);
void pm_intr_pm1(void);

/* these functions are for the PB Duo series and the PB 5XX series */
int pm_receive_pm2(u_char *);
int pm_send_pm2(u_char);
int pm_pmgrop_pm2(PMData *);
void pm_intr_pm2(void);

/* this function is MRG-Based (for testing) */
int pm_pmgrop_mrg(PMData *);

/* these functions are called from adb_direct.c */
void pm_setup_adb(void);
void pm_check_adb_devices(int);
void pm_intr(void);
int pm_adb_op(u_char *, void *, void *, int);

/* these functions also use the valiables of adb_direct.c */
void pm_adb_get_TALK_result(PMData *);
void pm_adb_get_ADB_data(PMData *);
void pm_adb_poll_next_device_pm1(PMData *);


/*
 * These valiables are in adb_direct.c.
 */
extern u_char	*adbBuffer;	/* pointer to user data area */
#define MAX_ADB_MSG_LENGTH	20
extern u_char	adbInputBuffer[MAX_ADB_MSG_LENGTH];      /* data input buffer */
extern void	*adbCompRout;	/* pointer to the completion routine */
extern void	*adbCompData;	/* pointer to the completion routine data */
extern int	adbWaiting;	/* waiting for return data from the device */
extern int	adbWaitingCmd;	/* ADB command we are waiting for */
extern int	adbStarting;	/* doing ADB reinit, so do "polling" differently */

/*
 * Define the external functions
 */
extern int zshard(int);			/* from zs.c */
extern void adb_comp_exec(void);	/* from adb_direct.c */


#ifdef PM_DEBUG
/*
 * This function dumps contents of the PMData
 */
void
pm_printerr(ttl, rval, num, data)
	char	*ttl;
	int	rval;
	int	num;
	char	*data;
{
	int i;

	printf( "pm: %s:%04x %02x ", ttl, rval, num );
	for( i=0; i<num; i++ )
		printf( "%02x ", data[i] );
	printf( "\n" );
}
#endif



/*
 * Check the hardware type of the Power Manager
 */
void
pm_setup_adb(void)
{
	switch (mac68k_machine.machineid) {
		case MACH_MACPB140:
		case MACH_MACPB145:
		case MACH_MACPB150:
		case MACH_MACPB160:
		case MACH_MACPB165:
		case MACH_MACPB165C:
		case MACH_MACPB170:
		case MACH_MACPB180:
		case MACH_MACPB180C:
			pmHardware = PM_HW_PB1XX;
			break;
		case MACH_MACPB210:
		case MACH_MACPB230:
		case MACH_MACPB250:
		case MACH_MACPB270:
		case MACH_MACPB280:
		case MACH_MACPB280C:
		case MACH_MACPB500:
			pmHardware = PM_HW_PB5XX;
			break;
		default:
			break;
	}
}


/*
 * Check the existent ADB devices
 */
void
pm_check_adb_devices(id)
	int id;
{
	u_short ed = 0x1;

	ed <<= id;
	pm_existent_ADB_devices |= ed;
}


/*
 * Wait until PM IC is busy
 */
int
pm_wait_busy(delay)
	int delay;
{
	while(PM_IS_ON) {
#ifdef PM_GRAB_SI
		zshard(0);		/* grab any serial interrupts */
#endif
		if ((--delay) < 0)
			return( 1 );	/* timeout */
	}
	return( 0 );
}


/*
 * Wait until PM IC is free
 */
int
pm_wait_free(delay)
	int delay;
{
	while(PM_IS_OFF) {
#ifdef PM_GRAB_SI
		zshard(0);		/* grab any serial interrupts */
#endif
		if ((--delay) < 0)
			return( 0 );	/* timeout */
	}
	return( 1 );
}



/*
 * Functions for the PB1XX series
 */

/*
 * Receive data from PM for the PB1XX series
 */
int
pm_receive_pm1(data)
	u_char *data;
{
	int rval = 0xffffcd34;

	via_reg(VIA2, vDirA) = 0x00;

	switch( 1 ) {
		default:
			if (pm_wait_busy( 0x40 ) != 0)
				break;			/* timeout */

			PM_SET_STATE_ACKOFF();
			*data = via_reg(VIA2, 0x200);

			rval = 0xffffcd33;
			if (pm_wait_free( 0x40 ) == 0)
				break;			/* timeout */

			rval = 0x00;
			break;
	}

	PM_SET_STATE_ACKON();
	via_reg(VIA2, vDirA) = 0x00;

	return( rval );
}



/*
 * Send data to PM for the PB1XX series
 */
int
pm_send_pm1(data, delay)
	u_char data;
	int delay;
{
	int	rval;

	via_reg(VIA2, vDirA) = 0xff;
	via_reg(VIA2, 0x200) = data;

	PM_SET_STATE_ACKOFF();
	if (pm_wait_busy( 0x400 ) != 0) {
		PM_SET_STATE_ACKON();
		via_reg(VIA2, vDirA) = 0x00;

		return( 0xffffcd36 );		
	}

	rval = 0x0;
	PM_SET_STATE_ACKON();
	if (pm_wait_free( 0x40 ) == 0)
		rval = 0xffffcd35;

	PM_SET_STATE_ACKON();
	via_reg(VIA2, vDirA) = 0x00;

	return( rval );
}


/*
 * My PMgrOp routine for the PB1XX series
 */
int
pm_pmgrop_pm1(pmdata)
	PMData *pmdata;
{
	int	i;
	int	s = 0x81815963;
	u_char	via1_vIER, via1_vDirA;
	int	rval = 0;
	int	num_pm_data = 0;
	u_char	pm_cmd;	
	u_char	pm_data;
	u_char	*pm_buf;

	/* disable all inetrrupts but PM */
	via1_vIER = via_reg(VIA1, vIER);
	PM_VIA_INTR_DISABLE();

	via1_vDirA = via_reg(VIA1, vDirA);

	switch( pmdata->command ) {
		default:
			for( i=0; i<7; i++ ) {
				via_reg(VIA2, vDirA) = 0x00;	

				/* wait until PM is free */
				if (pm_wait_free( ADBDelay ) == 0) {	/* timeout */
					via_reg(VIA2, vDirA) = 0x00;
					/* restore formar value */
					via_reg(VIA1, vDirA) = via1_vDirA;
					via_reg(VIA1, vIER) = via1_vIER;
					return( 0xffffcd38 );
				}

				switch( mac68k_machine.machineid ) {
					case MACH_MACPB160:
					case MACH_MACPB165:
					case MACH_MACPB165C:
					case MACH_MACPB180:
					case MACH_MACPB180C:
						{
							int delay = ADBDelay * 16;

							via_reg(VIA2, vDirA) = 0x00;
							while((via_reg(VIA2, 0x200) == 0x7f) && (delay >= 0))
								delay--;

							if (delay < 0) {	/* timeout */
								via_reg(VIA2, vDirA) = 0x00;
								/* restore formar value */
								via_reg(VIA1, vIER) = via1_vIER;
								return( 0xffffcd38 );
							}
						}
				} /* end switch */

				s=splhigh();

				via1_vDirA = via_reg(VIA1, vDirA);
				via_reg(VIA1, vDirA) &= 0x7f;

				pm_cmd = (u_char)(pmdata->command & 0xff);
				if ((rval = pm_send_pm1( pm_cmd, ADBDelay*8 )) == 0)	/* succeeded to send PM command */
					break;

				via_reg(VIA1, vDirA) = via1_vDirA;
				splx(s);
			} /* end for */

			/* failed to send a command */
			if (i == 7) {
				via_reg(VIA2, vDirA) = 0x00;
				/* restore formar value */
				via_reg(VIA1, vDirA) = via1_vDirA;
				via_reg(VIA1, vIER) = via1_vIER;
					return( 0xffffcd38 );
			}

			/* send # of PM data */
			num_pm_data = pmdata->num_data;
			if ((rval = pm_send_pm1( (u_char)(num_pm_data & 0xff), ADBDelay*8 )) != 0)
				break;			/* timeout */

			/* send PM data */
			pm_buf = (u_char *)pmdata->s_buf;
			for( i=0; i<num_pm_data; i++ )
				if((rval = pm_send_pm1( pm_buf[i], ADBDelay*8 )) != 0)
					break;			/* timeout */
			if ((i != num_pm_data) && (num_pm_data != 0))
				break;				/* timeout */

			/* Will PM IC return data? */
			if ((pm_cmd & 0x08) == 0) {
				rval = 0;
				break;				/* no returned data */
			}

			rval = 0xffffcd37;
			if (pm_wait_busy( ADBDelay ) != 0) {
				break;			/* timeout */
			}

			/* receive PM command */
			if ((rval = pm_receive_pm1( &pm_data )) != 0)
				break;

			pmdata->command = pm_data;

			/* receive number of PM data */
			if ((rval = pm_receive_pm1( &pm_data )) != 0)
				break;				/* timeout */
			num_pm_data = pm_data;
			pmdata->num_data = num_pm_data;

			/* receive PM data */
			pm_buf = (u_char *)pmdata->r_buf;
			for( i=0; i<num_pm_data; i++ ) {
				if ((rval = pm_receive_pm1( &pm_data )) != 0)
					break;				/* timeout */
				pm_buf[i] = pm_data;
			}

			rval = 0;
	}

	via_reg(VIA2, vDirA) = 0x00;	

	/* restore formar value */
	via_reg(VIA1, vDirA) = via1_vDirA;
	via_reg(VIA1, vIER) = via1_vIER;
	if (s != 0x81815963)
		splx(s);

	return( rval );
}


/*
 * My PM interrupt routine for PB100-series
 */
void
pm_intr_pm1(void)
{
	int	s;
	int	rval;
	PMData	pmdata;

	s = splhigh();

	PM_VIA_CLR_INTR();				/* clear VIA1 interrupt */

	/* ask PM what happend */
	pmdata.command = 0x78;
	pmdata.num_data = 0;
	pmdata.data[0] = pmdata.data[1] = 0;
	pmdata.s_buf = &pmdata.data[2];
	pmdata.r_buf = &pmdata.data[2];
	rval = pm_pmgrop_pm1( &pmdata );
	if (rval != 0) {
#ifdef PM_DEBUG
		printf( "pm: PM is not ready. error code=%08x\n", rval );
#endif
		splx(s);
	}

	if ((pmdata.data[2] & 0x10) == 0x10) {
		if ((pmdata.data[2] & 0x0f) == 0) {	/* ADB data that were requested by TALK command */
			pm_adb_get_TALK_result(&pmdata);
		} else if ((pmdata.data[2] & 0x08) == 0x8) {	/* PM is requesting to poll  */
			pm_adb_poll_next_device_pm1(&pmdata);
		} else if ((pmdata.data[2] & 0x04) == 0x4) {	/* ADB device event */
			pm_adb_get_ADB_data(&pmdata);
		}
	} else {
#ifdef PM_DEBUG
		pm_printerr( "driver does not supported this event.", rval,  pmdata.num_data, pmdata.data );
#endif
	}

	splx(s);
}



/*
 * Functions for the PB Duo series and the PB 5XX series
 */

/*
 * Receive data from PM for the PB Duo series and the PB 5XX series
 */
int
pm_receive_pm2(data)
	u_char *data;
{
	int	i;
	int	rval;

	rval = 0xffffcd34;

	switch( 1 ) {
		default:
			/* set VIA SR to input mode */
			via_reg(VIA1, vACR) |= 0x0c;
			via_reg(VIA1, vACR) &= ~0x10;
			i = PM_SR();

			PM_SET_STATE_ACKOFF();
			if (pm_wait_busy((int)ADBDelay*32) != 0)
				break;		/* timeout */

			PM_SET_STATE_ACKON();
			rval = 0xffffcd33;
			if (pm_wait_free((int)ADBDelay*32) == 0)
				break;		/* timeout */

			*data = PM_SR();
			rval = 0;

			break;
	}

	PM_SET_STATE_ACKON();
	via_reg(VIA1, vACR) |= 0x1c;

	return( rval );
}	



/*
 * Send data to PM for the PB Duo series and the PB 5XX series
 */
int
pm_send_pm2(data)
	u_char data;
{
	int	rval;

	via_reg(VIA1, vACR) |= 0x1c;
	PM_SR() = data;

	PM_SET_STATE_ACKOFF();
	rval = 0xffffcd36;
	if (pm_wait_busy((int)ADBDelay*32) != 0) {
		PM_SET_STATE_ACKON();

		via_reg(VIA1, vACR) |= 0x1c;

		return( rval );		
	}

	PM_SET_STATE_ACKON();
	rval = 0xffffcd35;
	if (pm_wait_free((int)ADBDelay*32) != 0)
		rval = 0;

	PM_SET_STATE_ACKON();
	via_reg(VIA1, vACR) |= 0x1c;

	return( rval );
}



/*
 * My PMgrOp routine for the PB Duo series and the PB 5XX series
 */
int
pm_pmgrop_pm2(pmdata)
	PMData *pmdata;
{
	int	i;
	int	s;
	u_char	via1_vIER;
	int	rval = 0;
	int	num_pm_data = 0;
	u_char	pm_cmd;	
	short	pm_num_rx_data;
	u_char	pm_data;
	u_char	*pm_buf;

	s=splhigh();

	/* disable all inetrrupts but PM */
	via1_vIER = 0x10;
	via1_vIER &= via_reg(VIA1, vIER);
	via_reg(VIA1, vIER) = via1_vIER;
	if (via1_vIER != 0x0)
		via1_vIER |= 0x80;

	switch( pmdata->command ) {
		default:
			/* wait until PM is free */
			pm_cmd = (u_char)(pmdata->command & 0xff);
			rval = 0xcd38;
			if (pm_wait_free( ADBDelay * 4 ) == 0)
				break;			/* timeout */

			if (HwCfgFlags3 & 0x00200000) {		/* PB 160, PB 165(c), PB 180(c) ? */
				int	delay = ADBDelay * 16;

				via_reg(VIA2, vDirA) = 0x00;
				while((via_reg(VIA2, 0x200) == 0x07) && (delay >= 0))
					delay--;

				if (delay < 0) {
					rval = 0xffffcd38;
					break;		/* timeout */
				}
			}

			/* send PM command */
			if ((rval = pm_send_pm2( (u_char)(pm_cmd & 0xff) )))
				break;				/* timeout */

			/* send number of PM data */
			num_pm_data = pmdata->num_data;
			if (HwCfgFlags3 & 0x00020000) {		/* PB Duo, PB 5XX */
				if (pm_send_cmd_type[pm_cmd] < 0) {
					if ((rval = pm_send_pm2( (u_char)(num_pm_data & 0xff) )) != 0)
						break;		/* timeout */
					pmdata->command = 0;
				}
			} else {				/* PB 1XX series ? */
				if ((rval = pm_send_pm2( (u_char)(num_pm_data & 0xff) )) != 0)
					break;			/* timeout */
			}			
			/* send PM data */
			pm_buf = (u_char *)pmdata->s_buf;
			for( i=0; i<num_pm_data; i++ )
				if((rval = pm_send_pm2( pm_buf[i] )) != 0)
					break;			/* timeout */
			if (i != num_pm_data)
				break;				/* timeout */


			/* check if PM will send me data  */
			pm_num_rx_data = pm_receive_cmd_type[pm_cmd];
			pmdata->num_data = pm_num_rx_data;
			if (pm_num_rx_data == 0) {
				rval = 0;
				break;				/* no return data */
			}

			/* receive PM command */
			pm_data = pmdata->command;
			if (HwCfgFlags3 & 0x00020000) {		/* PB Duo, PB 5XX */
				pm_num_rx_data--;
				if (pm_num_rx_data == 0)
					if ((rval = pm_receive_pm2( &pm_data )) != 0) {
						rval = 0xffffcd37;
						break;
					}
				pmdata->command = pm_data;
			} else {				/* PB 1XX series ? */
				if ((rval = pm_receive_pm2( &pm_data )) != 0) {
					rval = 0xffffcd37;
					break;
				}
				pmdata->command = pm_data;
			}

			/* receive number of PM data */
			if (HwCfgFlags3 & 0x00020000) {		/* PB Duo, PB 5XX */
				if (pm_num_rx_data < 0) {
					if ((rval = pm_receive_pm2( &pm_data )) != 0)
						break;		/* timeout */
					num_pm_data = pm_data;
				} else
					num_pm_data = pm_num_rx_data;
				pmdata->num_data = num_pm_data;
			} else {				/* PB 1XX serias ? */
				if ((rval = pm_receive_pm2( &pm_data )) != 0)
					break;			/* timeout */
				num_pm_data = pm_data;
				pmdata->num_data = num_pm_data;
			}

			/* receive PM data */
			pm_buf = (u_char *)pmdata->r_buf;
			for( i=0; i<num_pm_data; i++ ) {
				if ((rval = pm_receive_pm2( &pm_data )) != 0)
					break;			/* timeout */
				pm_buf[i] = pm_data;
			}

			rval = 0;
	}

	/* restore former value */
	via_reg(VIA1, vIER) = via1_vIER;
	splx(s);

	return( rval );
}


/*
 * My PM interrupt routine for the PB Duo series and the PB 5XX series
 */
void
pm_intr_pm2(void)
{
	int	s;
	int	rval;
	PMData	pmdata;

	s = splhigh();

	PM_VIA_CLR_INTR();				/* clear VIA1 interrupt */
							/* ask PM what happend */
	pmdata.command = 0x78;
	pmdata.num_data = 0;
	pmdata.s_buf = &pmdata.data[2];
	pmdata.r_buf = &pmdata.data[2];
	rval = pm_pmgrop_pm2( &pmdata );
	if (rval != 0) {
#ifdef PM_DEBUG
		printf( "pm: PM is not ready. error code: %08x\n", rval );
#endif
		splx(s);
	}

	switch( (u_int)(pmdata.data[2] & 0xff) ) {
		case 0x00:				/* 1 sec interrupt? */
			{
			break;
			}
		case 0x80:				/* 1 sec interrupt? */
			{
			pm_counter++;
			break;
			}
		case 0x08:				/* Brightness/Contrast button on LCD panel */
			{
			/* get brightness and contrast of the LCD */
			pm_LCD_brightness = (u_int)pmdata.data[3] & 0xff;
			pm_LCD_contrast = (u_int)pmdata.data[4] & 0xff;
/*
			pm_printerr( "#08", rval, pmdata.num_data, pmdata.data );
			pmdata.command = 0x33;
			pmdata.num_data = 1;
			pmdata.s_buf = pmdata.data;
			pmdata.r_buf = pmdata.data;
			pmdata.data[0] = pm_LCD_contrast;
			rval = pm_pmgrop_pm2( &pmdata );
			pm_printerr( "#33", rval, pmdata.num_data, pmdata.data );
*/
			/* this is an experimental code */
			pmdata.command = 0x41;
			pmdata.num_data = 1;
			pmdata.s_buf = pmdata.data;
			pmdata.r_buf = pmdata.data;
			pm_LCD_brightness = 0x7f - pm_LCD_brightness / 2;
			if (pm_LCD_brightness < 0x25)	pm_LCD_brightness = 0x25;
			if (pm_LCD_brightness > 0x5a)	pm_LCD_brightness = 0x7f;
			pmdata.data[0] = pm_LCD_brightness;
			rval = pm_pmgrop_pm2( &pmdata );
			break;
			}
							/* ADB data that were requested by TALK command */
		case 0x10:
		case 0x14:
			pm_adb_get_TALK_result(&pmdata);
			break;
							/* ADB device event */
		case 0x16:
		case 0x18:
		case 0x1e:
			pm_adb_get_ADB_data(&pmdata);
			break;
		default:
			{
#ifdef PM_DEBUG
			pm_printerr( "driver does not supported this event.", pmdata.data[2], pmdata.num_data, pmdata.data );
#endif
			}
			break;
	}

	splx(s);
}


/*
 * MRG-based PMgrOp routine
 */
int
pm_pmgrop_mrg(pmdata)
	PMData *pmdata;
{
	u_int32_t rval=0;

	asm("
		movl	%1, a0
		.word   0xa085
		movl	d0, %0"
		: "=g" (rval)
		: "g" (pmdata)
		: "a0", "d0" );

	return rval;
}


/*
 * My PMgrOp routine
 */
int
pmgrop(pmdata)
	PMData *pmdata;
{
	switch( pmHardware ) {
		case PM_HW_PB1XX:
			{
			return( pm_pmgrop_pm1(pmdata) );
			break;
			}
		case PM_HW_PB5XX:
			{
			return( pm_pmgrop_pm2(pmdata) );
			break;
			}
		default:
/*			return( pmgrop_mrg(pmdata) );	*/
			return( -1 );
	}
}


/*
 * My PM interrupt routine
 */
void
pm_intr(void)
{
	switch( pmHardware ) {
		case PM_HW_PB1XX:
			{
			pm_intr_pm1();
			break;
			}
		case PM_HW_PB5XX:
			{
			pm_intr_pm2();
			break;
			}
		default:
			break;
	}
}



/*
 * Synchronous ADBOp routine for the Power Manager
 */
int
pm_adb_op(buffer, compRout, data, command)
	u_char *buffer;
	void *compRout;
	void *data;
	int command;
{
	int	i,len;
	int	s;
	int	rval;
	int	delay;
	PMData	pmdata;

	if (adbWaiting == 1)
		return( -1 );

	s = splhigh();
	via_reg(VIA1, vIER) = 0x10;

 	adbBuffer = buffer;
	adbCompRout = compRout;
	adbCompData = data;

	pmdata.command = 0x20;
	pmdata.s_buf = pmdata.data;
	pmdata.r_buf = pmdata.data;

	if ((command & 0xc) == 0x8) {		/* if the command is LISTEN, add number of ADB data to number of PM data */
		if (buffer != (u_char *)0)
			pmdata.num_data = buffer[0] + 3;
	} else {
		pmdata.num_data = 3;
	}

	pmdata.data[0] = (u_char)(command & 0xff);
	pmdata.data[1] = 0;
	if ((command & 0xc) == 0x8) {		/* if the command is LISTEN, copy ADB data to PM buffer */
		if ((buffer != (u_char *)0) && (buffer[0] <= 24)) {
			pmdata.data[2] = buffer[0];		/* number of data */
			for( i=0; i<buffer[0]; i++ )
				pmdata.data[3 + i] = buffer[1 + i];
		} else
			pmdata.data[2] = 0;
	} else
		pmdata.data[2] = 0;

	rval = pmgrop( &pmdata );
	if (rval != 0)
		return( -1 );

	if (adbWaiting == 0) {
		adbWaiting = 1;
		adbWaitingCmd = command;
	}

	PM_VIA_INTR_ENABLE();

	/* wait until the PM interrupt is occurred */
	delay = 0x80000;
	while(adbWaiting == 1) {
		if ((via_reg(VIA1, vIFR) & 0x10) == 0x10)
			pm_intr();
#ifdef PM_GRAB_SI
			zshard(0);		/* grab any serial interrupts */
#endif
		if ((--delay) < 0)
			return( -1 );
	}

	if (buffer != (u_char *)0) {
		len = adbInputBuffer[3];
		for (i=0; i<=len; i++)
				buffer[i] = adbInputBuffer[3 + i];
		if (len < 0)
			buffer[0] = 0;	
	}

	/* this command enables the interrupt by operating ADB devices */ 
	if (HwCfgFlags3 & 0x00020000) {		/* PB Duo series, PB 500 series */
		pmdata.command = 0x20;
		pmdata.num_data = 4;
		pmdata.s_buf = pmdata.data;
		pmdata.r_buf = pmdata.data;
		pmdata.data[0] = 0x00;	
		pmdata.data[1] = 0x86;	/* magic spell for awaking the PM */
		pmdata.data[2] = 0x00;	
		pmdata.data[3] = 0x0c;	/* each bit may express the existent ADB device */
	} else {				/* PB 100-series */
		pmdata.command = 0x20;
		pmdata.num_data = 3;
		pmdata.s_buf = pmdata.data;
		pmdata.r_buf = pmdata.data;
		pmdata.data[0] = (u_char)(command & 0xf0) | 0xc;
		pmdata.data[1] = 0x04;
		pmdata.data[2] = 0x00;
	}
	rval = pmgrop( &pmdata );

	splx(s);
	return( rval );
}


void
pm_adb_get_TALK_result(pmdata)
	PMData *pmdata;
{
	int i;
	int rx_pm_adb_cmd;

	rx_pm_adb_cmd = (u_int)pmdata->data[3] & 0xff;

	pmdata->data[2] &= 0xf;
	pmdata->data[1] = pmdata->data[3];
	pmdata->data[3] = pmdata->num_data - 2;

	adbInputBuffer[0] = pmdata->num_data + 1;
	for( i=1; i<pmdata->num_data+2; i++ )
		adbInputBuffer[i] = pmdata->data[i];

	if ((adbWaiting == 1) && (rx_pm_adb_cmd == adbWaitingCmd)) {
		if (adbStarting == 0)
			adb_complete( &pmdata->data[3] , (long)0, adbWaitingCmd );
		adbWaitingCmd = 0x0;
					
		adbWaiting = 0;
		adb_comp_exec();
		adbBuffer = (long)0;
		adbCompRout = (long)0;
		adbCompData = (long)0;
	}
}


void
pm_adb_get_ADB_data(pmdata)
	PMData *pmdata;
{
	int i;

	i = (u_int)pmdata->data[3] & 0xff;
	pmdata->data[2] &= 0xf;
	pmdata->data[1] = pmdata->data[3];
	pmdata->data[3] = pmdata->num_data - 2;

	adbInputBuffer[0] = pmdata->num_data + 1;
	if (adbStarting == 0)
		adb_complete( &pmdata->data[3] , (long)0, i );
}


void
pm_adb_poll_next_device_pm1(pmdata)
	PMData *pmdata;
{
	int i;
	int ndid;
	u_short bendid = 0x1;
	int rval;
	PMData tmp_pmdata;

	/* find another existent ADB device to poll */
	for( i=1; i<16; i++ ) {
		ndid = (((pmdata->data[3] & 0xf0) >> 4) + i) & 0xf;
		bendid <<= ndid;
		if ((pm_existent_ADB_devices & bendid) != 0)
			break;
	}

	/* poll the other device */
	tmp_pmdata.command = 0x20;
	tmp_pmdata.num_data = 3;
	tmp_pmdata.s_buf = tmp_pmdata.data;
	tmp_pmdata.r_buf = tmp_pmdata.data;
	tmp_pmdata.data[0] = (u_char)(ndid << 4) | 0xc;
	tmp_pmdata.data[1] = 0x04;	/* magic spell for awaking the PM */
	tmp_pmdata.data[2] = 0x00;
	rval = pmgrop( &tmp_pmdata );
}