/* $OpenBSD: viareg.h,v 1.8 2001/05/08 17:30:40 aaron Exp $ */ /* $NetBSD: viareg.h,v 1.6 1997/02/28 07:41:41 scottr Exp $ */ /*- * Copyright (C) 1993 Allen K. Briggs, Chris P. Caputo, * Michael L. Finch, Bradley A. Grantham, and * Lawrence A. Kesteloot * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the Alice Group. * 4. The names of the Alice Group or any of its members may not be used * to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE ALICE GROUP ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE ALICE GROUP BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /* * Prototype VIA control definitions */ #ifndef _MAC68K_VIAREG_H_ #define _MAC68K_VIAREG_H_ /* VIA1 data register A */ #define DA1I_vSCCWrReq 0x80 #define DA1O_vPage2 0x40 #define DA1I_CPU_ID1 0x40 #define DA1O_vHeadSel 0x20 #define DA1O_vOverlay 0x10 #define DA1O_vSync 0x08 #define DA1O_RESERVED2 0x04 #define DA1O_RESERVED1 0x02 #define DA1O_RESERVED0 0x01 /* VIA1 data register B */ #define DB1I_Par_Err 0x80 #define DB1O_vSndEnb 0x80 #define DB1O_Par_Enb 0x40 #define DB1O_vFDesk2 0x20 #define DB1O_vFDesk1 0x10 #define DB1I_vFDBInt 0x08 #define DB1O_rTCEnb 0x04 #define DB1O_rTCCLK 0x02 #define DB1O_rTCData 0x01 #define DB1I_rTCData 0x01 /* VIA2 data register A */ #define DA2O_v2Ram1 0x80 #define DA2O_v2Ram0 0x40 #define DA2I_v2IRQ0 0x40 #define DA2I_v2IRQE 0x20 #define DA2I_v2IRQD 0x10 #define DA2I_v2IRQC 0x08 #define DA2I_v2IRQB 0x04 #define DA2I_v2IRQA 0x02 #define DA2I_v2IRQ9 0x01 /* VIA2 data register B */ #define DB2O_v2VBL 0x80 #define DB2O_Par_Test 0x80 #define DB2I_v2SNDEXT 0x40 #define DB2I_v2TM0A 0x20 #define DB2I_v2TM1A 0x10 #define DB2I_vFC3 0x08 #define DB2O_vFC3 0x08 #define DB2O_v2PowerOff 0x04 #define DB2O_v2BusLk 0x02 #define DB2O_vCDis 0x01 #define DB2O_CEnable 0x01 /* * VIA1 interrupts */ #define VIA1_T1 6 #define VIA1_T2 5 #define VIA1_ADBCLK 4 #define VIA1_ADBDATA 3 #define VIA1_ADBRDY 2 #define VIA1_VBLNK 1 #define VIA1_ONESEC 0 /* VIA1 interrupt bits */ #define V1IF_IRQ 0x80 #define V1IF_T1 (1 << VIA1_T1) #define V1IF_T2 (1 << VIA1_T2) #define V1IF_ADBCLK (1 << VIA1_ADBCLK) #define V1IF_ADBDATA (1 << VIA1_ADBDATA) #define V1IF_ADBRDY (1 << VIA1_ADBRDY) #define V1IF_VBLNK (1 << VIA1_VBLNK) #define V1IF_ONESEC (1 << VIA1_ONESEC) /* * VIA2 interrupts */ #define VIA2_T1 6 #define VIA2_T2 5 #define VIA2_ASC 4 #define VIA2_SCSIIRQ 3 #define VIA2_EXPIRQ 2 #define VIA2_SLOTINT 1 #define VIA2_SCSIDRQ 0 /* VIA2 interrupt bits */ #define V2IF_IRQ 0x80 #define V2IF_T1 (1 << VIA2_T1) #define V2IF_T2 (1 << VIA2_T2) #define V2IF_ASC (1 << VIA2_ASC) #define V2IF_SCSIIRQ (1 << VIA2_SCSIIRQ) #define V2IF_EXPIRQ (1 << VIA2_EXPIRQ) #define V2IF_SLOTINT (1 << VIA2_SLOTINT) #define V2IF_SCSIDRQ (1 << VIA2_SCSIDRQ) #define VIA1_INTS (V1IF_T1 | V1IF_ADBRDY) #define VIA2_INTS (V2IF_T1 | V2IF_ASC | V2IF_SCSIIRQ | V2IF_SLOTINT | \ V2IF_SCSIDRQ) #define RBV_INTS (V2IF_T1 | V2IF_ASC | V2IF_SCSIIRQ | V2IF_SLOTINT | \ V2IF_SCSIDRQ | V1IF_ADBRDY) #define ACR_T1LATCH 0x40 extern volatile unsigned char *Via1Base; extern volatile unsigned char *Via2Base; /* init in VIA_Initialize */ #define VIA1_addr Via1Base /* at PA 0x50f00000 */ #define VIA2OFF 1 /* VIA2 addr = VIA1_addr * 0x2000 */ #define RBVOFF 0x13 /* RBV addr = VIA1_addr * 0x13000 */ #define VIA1 0 extern int VIA2; /* VIA interface registers */ #define vBufA 0x1e00 /* register A */ #define vBufB 0 /* register B */ #define vDirA 0x0600 /* data direction register */ #define vDirB 0x0400 /* data direction register */ #define vT1C 0x0800 #define vT1CH 0x0a00 #define vT1L 0x0c00 #define vT1LH 0x0e00 #define vT2C 0x1000 #define vT2CH 0x1200 #define vSR 0x1400 /* shift register */ #define vACR 0x1600 /* aux control register */ #define vPCR 0x1800 /* peripheral control register */ #define vIFR 0x1a00 /* interrupt flag register */ #define vIER 0x1c00 /* interrupt enable register */ /* RBV interface registers */ #define rBufB 0 /* register B */ #define rBufA 2 /* register A */ #define rIFR 0x3 /* interrupt flag register (writes?) */ #define rIER 0x13 /* interrupt enable register */ #define rMonitor 0x10 /* Monitor type */ #define rSlotInt 0x12 /* Slot interrupt */ /* RBV monitor type flags and masks */ #define RBVDepthMask 0x07 /* depth in bits */ #define RBVMonitorMask 0x38 /* Type numbers */ #define RBVOff 0x40 /* monitor turn off */ #define RBVMonIDNone 0x38 /* What RBV actually has for no video */ #define RBVMonIDOff 0x0 /* What rbv_vidstatus() returns for no video */ #define RBVMonID15BWP 0x08 /* BW portrait */ #define RBVMonIDRGB 0x10 /* color monitor */ #define RBVMonIDRGB15 0x28 /* 15 inch RGB */ #define RBVMonIDBW 0x30 /* No internal video */ #define via_reg(v, r) (*(Via1Base+(v)*0x2000+(r))) #define via2_reg(r) (*(Via2Base+(r))) #define vDirA_ADBState 0x30 #ifdef _KERNEL void via_init __P((void)); int rbv_vidstatus __P((void)); void via_shutdown __P((void)); void via_set_modem __P((int)); int add_nubus_intr __P((int, void (*) __P((void *, int)), void *)); void enable_nubus_intr __P((void)); void via1_register_irq __P((int, void (*)(void *), void *)); void via2_register_irq __P((int, void (*)(void *), void *)); extern void (*via1itab[7]) __P((void *)); extern void (*via2itab[7]) __P((void *)); #endif /* _KERNEL */ #endif /* _MAC68K_VIAREG_H_ */