/* $OpenBSD: adb.c,v 1.40 2015/06/24 11:58:06 mpi Exp $ */ /* $NetBSD: adb.c,v 1.6 1999/08/16 06:28:09 tsubai Exp $ */ /* $NetBSD: adb_direct.c,v 1.14 2000/06/08 22:10:45 tsubai Exp $ */ /* * Copyright (C) 1996, 1997 John P. Wittkoski * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by John P. Wittkoski. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (C) 1994 Bradley A. Grantham * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This code is rather messy, but I don't have time right now * to clean it up as much as I would like. * But it works, so I'm happy. :-) jpw */ /* * TO DO: * - We could reduce the time spent in the adb_intr_* routines * by having them save the incoming and outgoing data directly * in the adbInbound and adbOutbound queues, as it would reduce * the number of times we need to copy the data around. It * would also make the code more readable and easier to follow. * - (Related to above) Use the header part of adbCommand to * reduce the number of copies we have to do of the data. * - (Related to above) Actually implement the adbOutbound queue. * This is fairly easy once you switch all the intr routines * over to using adbCommand structs directly. * - There is a bug in the state machine of adb_intr_cuda * code that causes hangs, especially on 030 machines, probably * because of some timing issues. Because I have been unable to * determine the exact cause of this bug, I used the timeout function * to check for and recover from this condition. If anyone finds * the actual cause of this bug, the calls to timeout and the * adb_cuda_tickle routine can be removed. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "apm.h" #define printf_intr printf #ifdef DEBUG #ifndef ADB_DEBUG #define ADB_DEBUG #endif #endif int adb_polling; /* Are we polling? (Debugger mode) */ #ifdef ADB_DEBUG int adb_debug; /* Output debugging messages */ #endif /* ADB_DEBUG */ /* some misc. leftovers */ #define vPB 0x0000 #define vPB3 0x08 #define vPB4 0x10 #define vPB5 0x20 #define vSR_INT 0x04 #define vSR_OUT 0x10 /* the type of ADB action that we are currently performing */ #define ADB_ACTION_NOTREADY 0x1 /* has not been initialized yet */ #define ADB_ACTION_IDLE 0x2 /* the bus is currently idle */ #define ADB_ACTION_OUT 0x3 /* sending out a command */ #define ADB_ACTION_IN 0x4 /* receiving data */ /* * Shortcuts for setting or testing the VIA bit states. * Not all shortcuts are used for every type of ADB hardware. */ #define ADB_SET_STATE_IDLE_CUDA() via_reg_or(VIA1, vBufB, (vPB4 | vPB5)) #define ADB_SET_STATE_TIP() via_reg_and(VIA1, vBufB, ~vPB5) #define ADB_CLR_STATE_TIP() via_reg_or(VIA1, vBufB, vPB5) #define ADB_TOGGLE_STATE_ACK_CUDA() via_reg_xor(VIA1, vBufB, vPB4) #define ADB_SET_STATE_ACKOFF_CUDA() via_reg_or(VIA1, vBufB, vPB4) #define ADB_SET_SR_INPUT() via_reg_and(VIA1, vACR, ~vSR_OUT) #define ADB_SET_SR_OUTPUT() via_reg_or(VIA1, vACR, vSR_OUT) #define ADB_SR() read_via_reg(VIA1, vSR) #define ADB_VIA_INTR_ENABLE() write_via_reg(VIA1, vIER, 0x84) #define ADB_VIA_INTR_DISABLE() write_via_reg(VIA1, vIER, 0x04) #define ADB_VIA_CLR_INTR() write_via_reg(VIA1, vIFR, 0x04) #define ADB_INTR_IS_OFF (vPB3 == (read_via_reg(VIA1, vBufB) & vPB3)) #define ADB_INTR_IS_ON (0 == (read_via_reg(VIA1, vBufB) & vPB3)) #define ADB_SR_INTR_IS_ON (vSR_INT == (read_via_reg(VIA1, \ vIFR) & vSR_INT)) /* * This is the delay that is required (in uS) between certain * ADB transactions. The actual timing delay for for each uS is * calculated at boot time to account for differences in machine speed. */ #define ADB_DELAY 150 /* * Maximum ADB message length; includes space for data, result, and * device code - plus a little for safety. */ #define ADB_MAX_MSG_LENGTH 16 #define ADB_MAX_HDR_LENGTH 8 #define ADB_QUEUE 32 #define ADB_TICKLE_TICKS 4 /* * Eventually used for two separate queues, the queue between * the upper and lower halves, and the outgoing packet queue. */ struct adbCommand { u_char header[ADB_MAX_HDR_LENGTH]; /* not used yet */ u_char data[ADB_MAX_MSG_LENGTH]; /* packet data only */ u_char *saveBuf; /* where to save result */ u_char *compRout; /* completion routine pointer */ u_char *compData; /* completion routine data pointer */ u_int cmd; /* the original command for this data */ u_int unsol; /* 1 if packet was unsolicited */ u_int ack_only; /* 1 for no special processing */ }; /* * A few variables that we need and their initial values. */ int adbHardware = ADB_HW_UNKNOWN; int adbActionState = ADB_ACTION_NOTREADY; int adbWaiting; /* waiting for return data from the device */ int adbWriteDelay; /* working on (or waiting to do) a write */ int adbWaitingCmd; /* ADB command we are waiting for */ u_char *adbBuffer; /* pointer to user data area */ void *adbCompRout; /* pointer to the completion routine */ void *adbCompData; /* pointer to the completion routine data */ int adbStarting = 1; /* doing adb_reinit so do polling differently */ u_char adbInputBuffer[ADB_MAX_MSG_LENGTH]; /* data input buffer */ u_char adbOutputBuffer[ADB_MAX_MSG_LENGTH]; /* data output buffer */ int adbSentChars; /* how many characters we have sent */ struct adbCommand adbInbound[ADB_QUEUE]; /* incoming queue */ int adbInCount; /* how many packets in in queue */ int adbInHead; /* head of in queue */ int adbInTail; /* tail of in queue */ int tickle_count; /* how many tickles seen for this packet? */ int tickle_serial; /* the last packet tickled */ int adb_cuda_serial; /* the current packet */ struct timeout adb_cuda_timeout; struct timeout adb_softintr_timeout; int adbempty; /* nonzero if no adb devices */ extern struct cfdriver adb_cd; volatile u_char *Via1Base; /* * The following are private routines. */ #ifdef ADB_DEBUG void print_single(u_char *); #endif void adb_intr_cuda(void); void adb_soft_intr(void); int send_adb_cuda(u_char *, u_char *, void *, void *, int); void adb_cuda_tickle(void); void adb_pass_up(struct adbCommand *); void adb_op_comprout(caddr_t, caddr_t, int); void adb_reinit(struct adb_softc *); int count_adbs(struct adb_softc *); int get_ind_adb_info(struct adb_softc *, ADBDataBlock *, int); int get_adb_info(ADBDataBlock *, int); int adb_op(Ptr, Ptr, Ptr, short); void adb_hw_setup(void); int adb_cmd_result(u_char *); void setsoftadb(void); int adb_intr(void *arg); void adb_cuda_autopoll(void); void adb_cuda_fileserver_mode(void); #ifdef ADB_DEBUG /* * print_single * Diagnostic display routine. Displays the hex values of the * specified elements of the u_char. The length of the "string" * is in [0]. */ void print_single(str) u_char *str; { int x; if (str == NULL) { printf_intr("no data - null pointer\n"); return; } if (*str == '\0') { printf_intr("nothing returned\n"); return; } if (*str > 20) { printf_intr("ADB: ACK > 20 no way!\n"); *str = 20; } printf_intr("(length=0x%x):", *str); for (x = 1; x <= *str; x++) printf_intr(" 0x%02x", str[x]); printf_intr("\n"); } #endif void adb_cuda_tickle(void) { volatile int s; if (adbActionState == ADB_ACTION_IN) { if (tickle_serial == adb_cuda_serial) { if (++tickle_count > 0) { s = splhigh(); adbActionState = ADB_ACTION_IDLE; adbInputBuffer[0] = 0; ADB_SET_STATE_IDLE_CUDA(); splx(s); } } else { tickle_serial = adb_cuda_serial; tickle_count = 0; } } else { tickle_serial = adb_cuda_serial; tickle_count = 0; } timeout_add(&adb_cuda_timeout, ADB_TICKLE_TICKS); } /* * called when when an adb interrupt happens * * Cuda version of adb_intr * TO DO: do we want to add some calls to intr_dispatch() here to * grab serial interrupts? */ void adb_intr_cuda(void) { volatile int i, ending; volatile unsigned int s; struct adbCommand packet; s = splhigh(); /* can't be too careful - might be called */ /* from a routine, NOT an interrupt */ ADB_VIA_CLR_INTR(); /* clear interrupt */ ADB_VIA_INTR_DISABLE(); /* disable ADB interrupt on IIs. */ switch_start: switch (adbActionState) { case ADB_ACTION_IDLE: /* * This is an unexpected packet, so grab the first (dummy) * byte, set up the proper vars, and tell the chip we are * starting to receive the packet by setting the TIP bit. */ adbInputBuffer[1] = ADB_SR(); adb_cuda_serial++; if (ADB_INTR_IS_OFF) /* must have been a fake start */ break; ADB_SET_SR_INPUT(); ADB_SET_STATE_TIP(); adbInputBuffer[0] = 1; adbActionState = ADB_ACTION_IN; #ifdef ADB_DEBUG if (adb_debug) printf_intr("idle 0x%02x ", adbInputBuffer[1]); #endif break; case ADB_ACTION_IN: adbInputBuffer[++adbInputBuffer[0]] = ADB_SR(); /* intr off means this is the last byte (end of frame) */ if (ADB_INTR_IS_OFF) ending = 1; else ending = 0; if (1 == ending) { /* end of message? */ #ifdef ADB_DEBUG if (adb_debug) { printf_intr("in end 0x%02x ", adbInputBuffer[adbInputBuffer[0]]); print_single(adbInputBuffer); } #endif /* * Are we waiting AND does this packet match what we * are waiting for AND is it coming from either the * ADB or RTC/PRAM sub-device? This section _should_ * recognize all ADB and RTC/PRAM type commands, but * there may be more... NOTE: commands are always at * [4], even for RTC/PRAM commands. */ /* set up data for adb_pass_up */ memcpy(packet.data, adbInputBuffer, adbInputBuffer[0] + 1); if ((adbWaiting == 1) && (adbInputBuffer[4] == adbWaitingCmd) && ((adbInputBuffer[2] == 0x00) || (adbInputBuffer[2] == 0x01))) { packet.saveBuf = adbBuffer; packet.compRout = adbCompRout; packet.compData = adbCompData; packet.unsol = 0; packet.ack_only = 0; adb_pass_up(&packet); adbWaitingCmd = 0; /* reset "waiting" vars */ adbWaiting = 0; adbBuffer = NULL; adbCompRout = NULL; adbCompData = NULL; } else { packet.unsol = 1; packet.ack_only = 0; adb_pass_up(&packet); } /* reset vars and signal the end of this frame */ adbActionState = ADB_ACTION_IDLE; adbInputBuffer[0] = 0; ADB_SET_STATE_IDLE_CUDA(); /*ADB_SET_SR_INPUT();*/ /* * If there is something waiting to be sent out, * the set everything up and send the first byte. */ if (adbWriteDelay == 1) { delay(ADB_DELAY); /* required */ adbSentChars = 0; adbActionState = ADB_ACTION_OUT; /* * If the interrupt is on, we were too slow * and the chip has already started to send * something to us, so back out of the write * and start a read cycle. */ if (ADB_INTR_IS_ON) { ADB_SET_SR_INPUT(); ADB_SET_STATE_IDLE_CUDA(); adbSentChars = 0; adbActionState = ADB_ACTION_IDLE; adbInputBuffer[0] = 0; break; } /* * If we got here, it's ok to start sending * so load the first byte and tell the chip * we want to send. */ ADB_SET_STATE_TIP(); ADB_SET_SR_OUTPUT(); write_via_reg(VIA1, vSR, adbOutputBuffer[adbSentChars + 1]); } } else { ADB_TOGGLE_STATE_ACK_CUDA(); #ifdef ADB_DEBUG if (adb_debug) printf_intr("in 0x%02x ", adbInputBuffer[adbInputBuffer[0]]); #endif } break; case ADB_ACTION_OUT: i = ADB_SR(); /* reset SR-intr in IFR */ #ifdef ADB_DEBUG if (adb_debug) printf_intr("intr out 0x%02x ", i); #endif adbSentChars++; if (ADB_INTR_IS_ON) { /* ADB intr low during write */ #ifdef ADB_DEBUG if (adb_debug) printf_intr("intr was on "); #endif ADB_SET_SR_INPUT(); /* make sure SR is set to IN */ ADB_SET_STATE_IDLE_CUDA(); adbSentChars = 0; /* must start all over */ adbActionState = ADB_ACTION_IDLE; /* new state */ adbInputBuffer[0] = 0; adbWriteDelay = 1; /* must retry when done with * read */ delay(ADB_DELAY); goto switch_start; /* process next state right * now */ break; } if (adbOutputBuffer[0] == adbSentChars) { /* check for done */ if (0 == adb_cmd_result(adbOutputBuffer)) { /* do we expect data * back? */ adbWaiting = 1; /* signal waiting for return */ adbWaitingCmd = adbOutputBuffer[2]; /* save waiting command */ } else { /* no talk, so done */ /* set up stuff for adb_pass_up */ memcpy(packet.data, adbInputBuffer, adbInputBuffer[0] + 1); packet.saveBuf = adbBuffer; packet.compRout = adbCompRout; packet.compData = adbCompData; packet.cmd = adbWaitingCmd; packet.unsol = 0; packet.ack_only = 1; adb_pass_up(&packet); /* reset "waiting" vars, just in case */ adbWaitingCmd = 0; adbBuffer = NULL; adbCompRout = NULL; adbCompData = NULL; } adbWriteDelay = 0; /* done writing */ adbActionState = ADB_ACTION_IDLE; /* signal bus is idle */ ADB_SET_SR_INPUT(); ADB_SET_STATE_IDLE_CUDA(); #ifdef ADB_DEBUG if (adb_debug) printf_intr("write done "); #endif } else { write_via_reg(VIA1, vSR, adbOutputBuffer[adbSentChars + 1]); /* send next byte */ ADB_TOGGLE_STATE_ACK_CUDA(); /* signal byte ready to * shift */ #ifdef ADB_DEBUG if (adb_debug) printf_intr("toggle "); #endif } break; case ADB_ACTION_NOTREADY: #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: not yet initialized\n"); #endif break; default: ; #ifdef ADB_DEBUG if (adb_debug) printf_intr("intr: unknown ADB state\n"); #endif } ADB_VIA_INTR_ENABLE(); /* enable ADB interrupt on IIs. */ splx(s); /* restore */ } int send_adb_cuda(u_char * in, u_char * buffer, void *compRout, void *data, int command) { int s, len; #ifdef ADB_DEBUG if (adb_debug) printf_intr("SEND\n"); #endif if (adbActionState == ADB_ACTION_NOTREADY) return 1; /* Don't interrupt while we are messing with the ADB */ s = splhigh(); if ((adbActionState == ADB_ACTION_IDLE) && /* ADB available? */ (ADB_INTR_IS_OFF)) { /* and no incoming interrupt? */ } else if (adbWriteDelay == 0) /* it's busy, but is anything waiting? */ adbWriteDelay = 1; /* if no, then we'll "queue" * it up */ else { splx(s); return 1; /* really busy! */ } #ifdef ADB_DEBUG if (adb_debug) printf_intr("QUEUE\n"); #endif if ((long)in == (long)0) { /* need to convert? */ if ((command & 0x0c) == 0x08) /* copy addl data ONLY if * doing a listen! */ len = buffer[0]; /* length of additional data */ else len = 0;/* no additional data */ adbOutputBuffer[0] = 2 + len; /* dev. type + command + addl. * data */ adbOutputBuffer[1] = 0x00; /* mark as an ADB command */ adbOutputBuffer[2] = (u_char)command; /* load command */ /* copy additional output data, if any */ memcpy(adbOutputBuffer + 3, buffer + 1, len); } else /* if data ready, just copy over */ memcpy(adbOutputBuffer, in, in[0] + 2); adbSentChars = 0; /* nothing sent yet */ adbBuffer = buffer; /* save buffer to know where to save result */ adbCompRout = compRout; /* save completion routine pointer */ adbCompData = data; /* save completion routine data pointer */ adbWaitingCmd = adbOutputBuffer[2]; /* save wait command */ if (adbWriteDelay != 1) { /* start command now? */ #ifdef ADB_DEBUG if (adb_debug) printf_intr("out start NOW"); #endif delay(ADB_DELAY); adbActionState = ADB_ACTION_OUT; /* set next state */ ADB_SET_SR_OUTPUT(); /* set shift register for OUT */ write_via_reg(VIA1, vSR, adbOutputBuffer[adbSentChars + 1]); /* load byte for output */ ADB_SET_STATE_ACKOFF_CUDA(); ADB_SET_STATE_TIP(); /* tell ADB that we want to send */ } adbWriteDelay = 1; /* something in the write "queue" */ splx(s); if ((s & (1 << 18)) || adb_polling) /* XXX were VIA1 interrupts blocked ? */ /* poll until byte done */ while ((adbActionState != ADB_ACTION_IDLE) || (ADB_INTR_IS_ON) || (adbWaiting == 1)) if (ADB_SR_INTR_IS_ON) { /* wait for "interrupt" */ adb_intr_cuda(); /* process it */ if (cold) delay(ADB_DELAY); adb_soft_intr(); } return 0; } /* * Called when when an adb interrupt happens. * This routine simply transfers control over to the appropriate * code for the machine we are running on. */ int adb_intr(void *arg) { switch (adbHardware) { case ADB_HW_PMU: pm_intr(); break; case ADB_HW_CUDA: adb_intr_cuda(); break; } return 1; } /* * adb_pass_up is called by the interrupt-time routines. * It takes the raw packet data that was received from the * device and puts it into the queue that the upper half * processes. It then signals for a soft ADB interrupt which * will eventually call the upper half routine (adb_soft_intr). * * If in->unsol is 0, then this is either the notification * that the packet was sent (on a LISTEN, for example), or the * response from the device (on a TALK). The completion routine * is called only if the user specified one. * * If in->unsol is 1, then this packet was unsolicited and * so we look up the device in the ADB device table to determine * what its default service routine is. * * If in->ack_only is 1, then we really only need to call * the completion routine, so don't do any other stuff. * * Note that in->data contains the packet header AND data, * while adbInbound[]->data contains ONLY data. * * Note: Called only at interrupt time. Assumes this. */ void adb_pass_up(struct adbCommand *in) { int start = 0, len = 0, cmd = 0; ADBDataBlock block; if (adbInCount >= ADB_QUEUE) { #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: ring buffer overflow\n"); #endif return; } if (in->ack_only) { len = in->data[0]; cmd = in->cmd; start = 0; } else { switch (adbHardware) { case ADB_HW_CUDA: /* If it's unsolicited, accept only ADB data for now */ if (in->unsol) if (0 != in->data[2]) return; cmd = in->data[4]; if (in->data[0] < 5) len = 0; else len = in->data[0]-4; start = 4; break; case ADB_HW_PMU: cmd = in->data[1]; if (in->data[0] < 2) len = 0; else len = in->data[0]-1; start = 1; break; case ADB_HW_UNKNOWN: return; } /* Make sure there is a valid device entry for this device */ if (in->unsol) { /* ignore unsolicited data during adbreinit */ if (adbStarting) return; /* get device's comp. routine and data area */ if (-1 == get_adb_info(&block, ADB_CMDADDR(cmd))) return; } } /* * If this is an unsolicited packet, we need to fill in * some info so adb_soft_intr can process this packet * properly. If it's not unsolicited, then use what * the caller sent us. */ if (in->unsol) { adbInbound[adbInTail].compRout = (void *)block.dbServiceRtPtr; adbInbound[adbInTail].compData = (void *)block.dbDataAreaAddr; adbInbound[adbInTail].saveBuf = (void *)adbInbound[adbInTail].data; } else { adbInbound[adbInTail].compRout = (void *)in->compRout; adbInbound[adbInTail].compData = (void *)in->compData; adbInbound[adbInTail].saveBuf = (void *)in->saveBuf; } #ifdef ADB_DEBUG if (adb_debug && in->data[1] == 2) printf_intr("adb: caught error\n"); #endif /* copy the packet data over */ /* * TO DO: If the *_intr routines fed their incoming data * directly into an adbCommand struct, which is passed to * this routine, then we could eliminate this copy. */ memcpy(adbInbound[adbInTail].data + 1, in->data + start + 1, len); adbInbound[adbInTail].data[0] = len; adbInbound[adbInTail].cmd = cmd; adbInCount++; if (++adbInTail >= ADB_QUEUE) adbInTail = 0; /* * If the debugger is running, call upper half manually. * Otherwise, trigger a soft interrupt to handle the rest later. */ if (adb_polling) adb_soft_intr(); else setsoftadb(); } /* * Called to process the packets after they have been * placed in the incoming queue. * */ void adb_soft_intr(void) { int s; int cmd = 0; u_char *buffer; u_char *comprout; u_char *compdata; /*delay(2*ADB_DELAY);*/ while (adbInCount) { #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("%x %x %x ", adbInCount, adbInHead, adbInTail); #endif /* get the data we need from the queue */ buffer = adbInbound[adbInHead].saveBuf; comprout = adbInbound[adbInHead].compRout; compdata = adbInbound[adbInHead].compData; cmd = adbInbound[adbInHead].cmd; /* copy over data to data area if it's valid */ /* * Note that for unsol packets we don't want to copy the * data anywhere, so buffer was already set to 0. * For ack_only buffer was set to 0, so don't copy. */ if (buffer) memcpy(buffer, adbInbound[adbInHead].data, adbInbound[adbInHead].data[0] + 1); #ifdef ADB_DEBUG if (adb_debug & 0x80) { printf_intr("%p %p %p %x ", buffer, comprout, compdata, (short)cmd); printf_intr("buf: "); print_single(adbInbound[adbInHead].data); } #endif /* * Remove the packet from the queue before calling * the completion routine, so that the completion * routine can reentrantly process the queue. For * example, this happens when polling is turned on * by entering the debuger by keystroke. */ s = splhigh(); adbInCount--; if (++adbInHead >= ADB_QUEUE) adbInHead = 0; splx(s); /* call default completion routine if it's valid */ if (comprout) { ((int (*)(u_char *, u_char *, int)) comprout) (buffer, compdata, cmd); } } } /* * This is my version of the ADBOp routine. It mainly just calls the * hardware-specific routine. * * data : pointer to data area to be used by compRout * compRout : completion routine * buffer : for LISTEN: points to data to send - MAX 8 data bytes, * byte 0 = # of bytes * : for TALK: points to place to save return data * command : the adb command to send * result : 0 = success * : -1 = could not complete */ int adb_op(Ptr buffer, Ptr compRout, Ptr data, short command) { int result; switch (adbHardware) { case ADB_HW_PMU: result = pm_adb_op((u_char *)buffer, (void *)compRout, (void *)data, (int)command); if (result == 0) return 0; else return -1; break; case ADB_HW_CUDA: result = send_adb_cuda((u_char *)0, (u_char *)buffer, (void *)compRout, (void *)data, (int)command); if (result == 0) return 0; else return -1; break; default: return -1; } } /* * adb_hw_setup * This routine sets up the possible machine specific hardware * config (mainly VIA settings) for the various models. */ void adb_hw_setup(void) { volatile int i; switch (adbHardware) { case ADB_HW_PMU: /* * XXX - really PM_VIA_CLR_INTR - should we put it in * pm_direct.h? */ write_via_reg(VIA1, vIFR, 0x90); /* clear interrupt */ break; case ADB_HW_CUDA: via_reg_or(VIA1, vDirB, 0x30); /* register B bits 4 and 5: * outputs */ via_reg_and(VIA1, vDirB, 0xf7); /* register B bit 3: input */ via_reg_and(VIA1, vACR, ~vSR_OUT); /* make sure SR is set * to IN */ write_via_reg(VIA1, vACR, (read_via_reg(VIA1, vACR) | 0x0c) & ~0x10); adbActionState = ADB_ACTION_IDLE; /* used by all types of * hardware */ write_via_reg(VIA1, vIER, 0x84);/* make sure VIA interrupts * are on */ ADB_SET_STATE_IDLE_CUDA(); /* set ADB bus state to idle */ /* sort of a device reset */ i = ADB_SR(); /* clear interrupt */ ADB_VIA_INTR_DISABLE(); /* no interrupts while clearing */ ADB_SET_STATE_IDLE_CUDA(); /* reset state to idle */ delay(ADB_DELAY); ADB_SET_STATE_TIP(); /* signal start of frame */ delay(ADB_DELAY); ADB_TOGGLE_STATE_ACK_CUDA(); delay(ADB_DELAY); ADB_CLR_STATE_TIP(); delay(ADB_DELAY); ADB_SET_STATE_IDLE_CUDA(); /* back to idle state */ i = ADB_SR(); /* clear interrupt */ ADB_VIA_INTR_ENABLE(); /* ints ok now */ break; case ADB_HW_UNKNOWN: default: write_via_reg(VIA1, vIER, 0x04);/* turn interrupts off - TO * DO: turn PB ints off? */ break; } } /* * adb_reinit sets up the adb stuff * */ void adb_reinit(struct adb_softc *sc) { u_char send_string[ADB_MAX_MSG_LENGTH]; ADBDataBlock data; /* temp. holder for getting device info */ volatile int i, x; int s; int command; int result; int saveptr; /* point to next free relocation address */ int device; int nonewtimes; /* times thru loop w/o any new devices */ int ADBNumDevices = 0; /* Make sure we are not interrupted while building the table. */ if (adbHardware != ADB_HW_PMU) /* ints must be on for PB? */ s = splhigh(); /* Let intr routines know we are running reinit */ adbStarting = 1; /* * Initialize the ADB table. For now, we'll always use the same table * that is defined at the beginning of this file - no mallocs. */ for (i = 0; i < 16; i++) sc->sc_devtable[i].handler_id = 0; adb_hw_setup(); /* init the VIA bits and hard reset ADB */ delay(1000); /* send an ADB reset first */ adb_op_sync((Ptr)0, (short)0x00); delay(200000); /* * Probe for ADB devices. Probe devices 1-15 quickly to determine * which device addresses are in use and which are free. For each * address that is in use, move the device at that address to a higher * free address. Continue doing this at that address until no device * responds at that address. Then move the last device that was moved * back to the original address. Do this for the remaining addresses * that we determined were in use. * * When finished, do this entire process over again with the updated * list of in use addresses. Do this until no new devices have been * found in 20 passes though the in use address list. (This probably * seems long and complicated, but it's the best way to detect multiple * devices at the same address - sometimes it takes a couple of tries * before the collision is detected.) */ /* initial scan through the devices */ for (i = 1; i < 16; i++) { send_string[0] = 0; command = ADBTALK(i, 3); result = adb_op_sync((Ptr)send_string, (short)command); if (send_string[0] != 0) { /* check for valid device handler */ switch (send_string[2]) { case 0: case 0xfd: case 0xfe: case 0xff: continue; /* invalid, skip */ } /* found a device */ ++ADBNumDevices; KASSERT(ADBNumDevices < 16); sc->sc_devtable[ADBNumDevices].handler_id = (int)send_string[2]; sc->sc_devtable[ADBNumDevices].orig_addr = i; sc->sc_devtable[ADBNumDevices].curr_addr = i; sc->sc_devtable[ADBNumDevices].data = NULL; sc->sc_devtable[ADBNumDevices].handler = NULL; } } /* find highest unused address */ for (saveptr = 15; saveptr > 0; saveptr--) if (-1 == get_adb_info(&data, saveptr)) break; #ifdef ADB_DEBUG if (adb_debug & 0x80) { printf_intr("first free is: 0x%02x\n", saveptr); printf_intr("devices: %i\n", ADBNumDevices); } #endif nonewtimes = 0; /* no loops w/o new devices */ while (saveptr > 0 && nonewtimes++ < 11) { for (i = 1; i <= ADBNumDevices; i++) { device = sc->sc_devtable[i].curr_addr; #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("moving device 0x%02x to 0x%02x " "(index 0x%02x) ", device, saveptr, i); #endif /* send TALK R3 to address */ command = ADBTALK(device, 3); adb_op_sync((Ptr)send_string, (short)command); /* move device to higher address */ command = ADBLISTEN(device, 3); send_string[0] = 2; send_string[1] = (u_char)(saveptr | 0x60); send_string[2] = 0xfe; adb_op_sync((Ptr)send_string, (short)command); delay(500); /* send TALK R3 - anything at new address? */ command = ADBTALK(saveptr, 3); adb_op_sync((Ptr)send_string, (short)command); delay(500); if (send_string[0] == 0) { #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("failed, continuing\n"); #endif continue; } /* send TALK R3 - anything at old address? */ command = ADBTALK(device, 3); result = adb_op_sync((Ptr)send_string, (short)command); if (send_string[0] != 0) { /* check for valid device handler */ switch (send_string[2]) { case 0: case 0xfd: case 0xfe: case 0xff: continue; /* invalid, skip */ } /* new device found */ /* update data for previously moved device */ sc->sc_devtable[i].curr_addr = saveptr; #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("old device at index %i\n",i); #endif /* add new device in table */ #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("new device found\n"); #endif if (saveptr > ADBNumDevices) { ++ADBNumDevices; KASSERT(ADBNumDevices < 16); } sc->sc_devtable[ADBNumDevices].handler_id = (int)send_string[2]; sc->sc_devtable[ADBNumDevices].orig_addr = device; sc->sc_devtable[ADBNumDevices].curr_addr = device; /* These will be set correctly in adbsys.c */ /* Until then, unsol. data will be ignored. */ sc->sc_devtable[ADBNumDevices].data = NULL; sc->sc_devtable[ADBNumDevices].handler = NULL; /* find next unused address */ for (x = saveptr; x > 0; x--) { if (-1 == get_adb_info(&data, x)) { saveptr = x; break; } } if (x == 0) saveptr = 0; #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("new free is 0x%02x\n", saveptr); #endif nonewtimes = 0; } else { #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("moving back...\n"); #endif /* move old device back */ command = ADBLISTEN(saveptr, 3); send_string[0] = 2; send_string[1] = (u_char)(device | 0x60); send_string[2] = 0xfe; adb_op_sync((Ptr)send_string, (short)command); delay(1000); } } } #ifdef ADB_DEBUG if (adb_debug) { for (i = 1; i <= ADBNumDevices; i++) { x = get_ind_adb_info(sc, &data, i); if (x != -1) printf_intr("index 0x%x, addr 0x%x, type 0x%x\n", i, x, data.devType); } } #endif #ifdef ADB_DEBUG if (adb_debug) { if (0 == ADBNumDevices) /* tell user if no devices found */ printf_intr("adb: no devices found\n"); } #endif adbStarting = 0; /* not starting anymore */ #ifdef ADB_DEBUG if (adb_debug) printf_intr("adb: adb_reinit complete\n"); #endif if (adbHardware == ADB_HW_CUDA) { timeout_set(&adb_cuda_timeout, (void *)adb_cuda_tickle, NULL); timeout_add(&adb_cuda_timeout, ADB_TICKLE_TICKS); } if (adbHardware != ADB_HW_PMU) /* ints must be on for PB? */ splx(s); } /* * adb_cmd_result * * This routine lets the caller know whether the specified adb command string * should expect a returned result, such as a TALK command. * * returns: 0 if a result should be expected * 1 if a result should NOT be expected */ int adb_cmd_result(u_char *in) { switch (adbHardware) { case ADB_HW_CUDA: /* was it an ADB talk command? */ if ((in[1] == 0x00) && ((in[2] & 0x0c) == 0x0c)) return 0; /* was it an RTC/PRAM read date/time? */ if ((in[1] == 0x01) && (in[2] == 0x03)) return 0; return 1; case ADB_HW_PMU: return 1; default: return 1; } } /* * adb_op_sync * * This routine does exactly what the adb_op routine does, except that after * the adb_op is called, it waits until the return value is present before * returning. */ int adb_op_sync(Ptr buffer, short command) { int tmout; int result; volatile int flag = 0; result = adb_op(buffer, (void *)adb_op_comprout, (void *)&flag, command); /* send command */ if (result == 0) { /* send ok? */ /* * Total time to wait is calculated as follows: * - Tlt (stop to start time): 260 usec * - start bit: 100 usec * - up to 8 data bytes: 64 * 100 usec = 6400 usec * - stop bit (with SRQ): 140 usec * Total: 6900 usec * * This is the total time allowed by the specification. Any * device that doesn't conform to this will fail to operate * properly on some Apple systems. In spite of this we * double the time to wait; some Cuda-based apparently * queues some commands and allows the main CPU to continue * processing (radical concept, eh?). To be safe, allow * time for two complete ADB transactions to occur. */ for (tmout = 13800; !flag && tmout >= 10; tmout -= 10) delay(10); if (!flag && tmout > 0) delay(tmout); if (!flag) result = -2; } return result; } /* * adb_op_comprout * * This function is used by the adb_op_sync routine so it knows when the * function is done. */ void adb_op_comprout(caddr_t buffer, caddr_t compdata, int cmd) { *(int *)compdata = 0x01; /* update flag value */ } int count_adbs(struct adb_softc *sc) { int i; int found; found = 0; for (i = 1; i < 16; i++) if (0 != sc->sc_devtable[i].handler_id) found++; return found; } int get_ind_adb_info(struct adb_softc *sc, ADBDataBlock * info, int index) { if ((index < 1) || (index > 15)) /* check range 1-15 */ return (-1); #ifdef ADB_DEBUG if (adb_debug & 0x80) printf_intr("index 0x%x handler id 0x%x\n", index, sc->sc_devtable[index].handler_id); #endif if (0 == sc->sc_devtable[index].handler_id) /* make sure it's a valid entry */ return (-1); info->devType = sc->sc_devtable[index].handler_id; info->origADBAddr = sc->sc_devtable[index].orig_addr; info->dbServiceRtPtr = (Ptr)sc->sc_devtable[index].handler; info->dbDataAreaAddr = (Ptr)sc->sc_devtable[index].data; return (sc->sc_devtable[index].curr_addr); } int get_adb_info(ADBDataBlock * info, int adbAddr) { struct adb_softc *sc = adb_cd.cd_devs[0]; int i; if (sc == NULL) return (-1); if ((adbAddr < 1) || (adbAddr > 15)) /* check range 1-15 */ return (-1); for (i = 1; i < 15; i++) if (sc->sc_devtable[i].curr_addr == adbAddr) { info->devType = sc->sc_devtable[i].handler_id; info->origADBAddr = sc->sc_devtable[i].orig_addr; info->dbServiceRtPtr = (Ptr)sc->sc_devtable[i].handler; info->dbDataAreaAddr = sc->sc_devtable[i].data; return 0; /* found */ } return (-1); /* not found */ } int set_adb_info(ADBSetInfoBlock * info, int adbAddr) { struct adb_softc *sc = adb_cd.cd_devs[0]; int i; if (sc == NULL) return (-1); if ((adbAddr < 1) || (adbAddr > 15)) /* check range 1-15 */ return (-1); for (i = 1; i < 15; i++) if (sc->sc_devtable[i].curr_addr == adbAddr) { sc->sc_devtable[i].handler = (void *)(info->siServiceRtPtr); sc->sc_devtable[i].data = info->siDataAreaAddr; return 0; /* found */ } return (-1); /* not found */ } /* caller should really use machine-independent version: getPramTime */ /* this version does pseudo-adb access only */ int adb_read_date_time(time_t *time) { u_char output[ADB_MAX_MSG_LENGTH]; int result; int retcode; volatile int flag = 0; u_int32_t t; switch (adbHardware) { case ADB_HW_PMU: pm_read_date_time(time); retcode = 0; break; case ADB_HW_CUDA: output[0] = 0x02; /* 2 byte message */ output[1] = 0x01; /* to pram/rtc device */ output[2] = 0x03; /* read date/time */ result = send_adb_cuda((u_char *)output, (u_char *)output, (void *)adb_op_comprout, (void *)&flag, (int)0); if (result != 0) { /* exit if not sent */ retcode = -1; break; } while (0 == flag) /* wait for result */ ; delay(20); /* completion occurs too soon? */ memcpy(&t, output + 1, sizeof(t)); *time = (time_t)t; retcode = 0; break; case ADB_HW_UNKNOWN: default: retcode = -1; break; } if (retcode == 0) { #define DIFF19041970 2082844800 *time -= DIFF19041970; } else { *time = 0; } return retcode; } /* caller should really use machine-independent version: setPramTime */ /* this version does pseudo-adb access only */ int adb_set_date_time(time_t time) { u_char output[ADB_MAX_MSG_LENGTH]; int result; volatile int flag = 0; u_int32_t t; time += DIFF19041970; switch (adbHardware) { case ADB_HW_CUDA: t = time; /* XXX eventually truncates */ output[0] = 0x06; /* 6 byte message */ output[1] = 0x01; /* to pram/rtc device */ output[2] = 0x09; /* set date/time */ output[3] = (u_char)(t >> 24); output[4] = (u_char)(t >> 16); output[5] = (u_char)(t >> 8); output[6] = (u_char)(t); result = send_adb_cuda((u_char *)output, (u_char *)0, (void *)adb_op_comprout, (void *)&flag, (int)0); if (result != 0) /* exit if not sent */ return -1; while (0 == flag) /* wait for send to finish */ ; return 0; case ADB_HW_PMU: pm_set_date_time(time); return 0; default: return -1; } } int adb_poweroff(void) { u_char output[ADB_MAX_MSG_LENGTH]; int result; adb_polling = 1; switch (adbHardware) { case ADB_HW_PMU: /* Clear the wake on AC loss event */ pmu_fileserver_mode(0); pm_adb_poweroff(); for (;;); /* wait for power off */ return 0; case ADB_HW_CUDA: output[0] = 0x02; /* 2 byte message */ output[1] = 0x01; /* to pram/rtc/soft-power device */ output[2] = 0x0a; /* set poweroff */ result = send_adb_cuda((u_char *)output, (u_char *)0, (void *)0, (void *)0, (int)0); if (result != 0) /* exit if not sent */ return -1; for (;;); /* wait for power off */ return 0; default: return -1; } } void setsoftadb() { if (!timeout_initialized(&adb_softintr_timeout)) timeout_set(&adb_softintr_timeout, (void *)adb_soft_intr, NULL); timeout_add(&adb_softintr_timeout, 1); } void adb_cuda_autopoll() { volatile int flag = 0; int result; u_char output[16]; output[0] = 0x03; /* 3-byte message */ output[1] = 0x01; /* to pram/rtc/soft-power device */ output[2] = 0x01; /* cuda autopoll */ output[3] = 0x01; result = send_adb_cuda(output, output, adb_op_comprout, (void *)&flag, 0); if (result != 0) /* exit if not sent */ return; while (flag == 0); /* wait for result */ } void adb_cuda_fileserver_mode() { volatile int flag = 0; int result; u_char output[16]; output[0] = 0x03; /* 3-byte message */ output[1] = 0x01; /* to pram/rtc device/soft-power device */ output[2] = 0x13; /* cuda file server mode */ output[3] = 0x01; /* True - Turn on after AC loss */ result = send_adb_cuda(output, output, adb_op_comprout, (void *)&flag, 0); if (result != 0) return; while (flag == 0); } void adb_restart() { int result; u_char output[16]; adb_polling = 1; switch (adbHardware) { case ADB_HW_CUDA: output[0] = 0x02; /* 2 byte message */ output[1] = 0x01; /* to pram/rtc/soft-power device */ output[2] = 0x11; /* restart */ result = send_adb_cuda((u_char *)output, (u_char *)0, (void *)0, (void *)0, (int)0); if (result != 0) /* exit if not sent */ return; while (1); /* not return */ case ADB_HW_PMU: pm_adb_restart(); while (1); /* not return */ } } /* * Driver definition. */ int adbmatch(struct device *, void *, void *); void adbattach(struct device *, struct device *, void *); struct cfattach adb_ca = { sizeof(struct adb_softc), adbmatch, adbattach }; int adbmatch(struct device *parent, void *cf, void *aux) { struct confargs *ca = aux; if (ca->ca_nreg < 8) return 0; if (ca->ca_nintr < 4) return 0; if (strcmp(ca->ca_name, "via-cuda") == 0) return 1; if (strcmp(ca->ca_name, "via-pmu") == 0) return 1; return 0; } void adbattach(struct device *parent, struct device *self, void *aux) { struct adb_softc *sc = (struct adb_softc *)self; struct confargs *ca = aux; struct confargs nca; char name[32]; int node; ADBDataBlock adbdata; struct adb_attach_args aa_args; int totaladbs; int adbindex, adbaddr; ca->ca_reg[0] += ca->ca_baseaddr; sc->sc_regbase = mapiodev(ca->ca_reg[0], ca->ca_reg[1]); Via1Base = sc->sc_regbase; if (strcmp(ca->ca_name, "via-cuda") == 0) adbHardware = ADB_HW_CUDA; else if (strcmp(ca->ca_name, "via-pmu") == 0) { adbHardware = ADB_HW_PMU; /* * Bus reset can take a long time if no adb devices are * connected, e.g. on a Mac Mini; so check for an adb * child in the OF tree to speed up pm_adb_op(). */ adbempty = 1; for (node = OF_child(ca->ca_node); node; node = OF_peer(node)) { if (OF_getprop(node, "name", name, sizeof name) <= 0) continue; if (strcmp(name, "adb") == 0) { adbempty = 0; break; } } } adb_polling = 1; if (!adbempty) { adb_reinit(sc); totaladbs = count_adbs(sc); printf(": irq %d, %s, %d target%s", ca->ca_intr[0], ca->ca_name, totaladbs, (totaladbs == 1) ? "" : "s"); } printf("\n"); mac_intr_establish(parent, ca->ca_intr[0], IST_LEVEL, IPL_TTY, adb_intr, sc, sc->sc_dev.dv_xname); /* init powerpc globals which control RTC functionality */ time_read = adb_read_date_time; time_write = adb_set_date_time; #if NAPM > 0 if (adbHardware == ADB_HW_PMU) { /* Magic for signalling the apm driver to match. */ nca.ca_name = "apm"; nca.ca_node = node; config_found(self, &nca, NULL); } #endif /* Attach I2C controller. */ for (node = OF_child(ca->ca_node); node; node = OF_peer(node)) { if (OF_getprop(node, "name", name, sizeof name) <= 0) continue; if (strcmp(name, "pmu-i2c") == 0) { nca.ca_name = "piic"; nca.ca_node = node; config_found(self, &nca, NULL); } } if (adbHardware == ADB_HW_CUDA) adb_cuda_fileserver_mode(); if (adbHardware == ADB_HW_PMU) pmu_fileserver_mode(1); /* * XXX If the machine doesn't have an ADB bus (PowerBook5,6+) * yes it sounds stupid to attach adb(4), but don't try to send * ADB commands otherwise the PMU may shutdown the machine... */ if (adbempty) return; /* for each ADB device */ for (adbindex = 1; adbindex <= totaladbs; adbindex++) { /* Get the ADB information */ adbaddr = get_ind_adb_info(sc, &adbdata, adbindex); aa_args.name = adb_device_name; aa_args.origaddr = adbdata.origADBAddr; aa_args.adbaddr = adbaddr; aa_args.handler_id = adbdata.devType; (void)config_found(self, &aa_args, adbprint); } if (adbHardware == ADB_HW_CUDA) adb_cuda_autopoll(); adb_polling = 0; }