/* $OpenBSD: clock.c,v 1.6 2002/04/28 14:47:50 miod Exp $ */ /* * Copyright (c) 1995 Theo de Raadt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed under OpenBSD by * Theo de Raadt for Willowglen Singapore. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This software was developed by the Computer Systems Engineering group * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and * contributed to Berkeley. * * All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)clock.c 8.1 (Berkeley) 6/11/93 */ #include #include #include #include #include #include #include #include "pcc.h" #include "mc.h" #include "pcctwo.h" #if NPCC > 0 #include #endif #if NPCCTWO > 0 #include #endif #if NMC > 0 #include #endif #if defined(GPROF) #include #endif /* * Statistics clock interval and variance, in usec. Variance must be a * power of two. Since this gives us an even number, not an odd number, * we discard one case and compensate. That is, a variance of 8192 would * give us offsets in [0..8191]. Instead, we take offsets in [1..8191]. * This is symmetric about the point 2048, or statvar/2, and thus averages * to that value (assuming uniform random numbers). */ int statvar = 8192; int statmin; /* statclock interval - 1/2*variance */ struct clocksoftc { struct device sc_dev; struct intrhand sc_profih; struct intrhand sc_statih; }; void clockattach(struct device *, struct device *, void *); int clockmatch(struct device *, void *, void *); struct cfattach clock_ca = { sizeof(struct clocksoftc), clockmatch, clockattach }; struct cfdriver clock_cd = { NULL, "clock", DV_DULL, 0 }; int clockintr(void *); int statintr(void *); int clockbus; u_char stat_reset, prof_reset; /* * Every machine must have a clock tick device of some sort; for this * platform this file manages it, no matter what form it takes. */ int clockmatch(parent, vcf, args) struct device *parent; void *vcf, *args; { return (1); } void clockattach(parent, self, args) struct device *parent, *self; void *args; { struct confargs *ca = args; struct clocksoftc *sc = (struct clocksoftc *)self; sc->sc_profih.ih_fn = clockintr; sc->sc_profih.ih_arg = 0; sc->sc_profih.ih_wantframe = 1; sc->sc_profih.ih_ipl = ca->ca_ipl; sc->sc_statih.ih_fn = statintr; sc->sc_statih.ih_arg = 0; sc->sc_statih.ih_wantframe = 1; sc->sc_statih.ih_ipl = ca->ca_ipl; clockbus = ca->ca_bustype; switch (ca->ca_bustype) { #if NPCC > 0 case BUS_PCC: prof_reset = ca->ca_ipl | PCC_IRQ_IEN | PCC_TIMERACK; stat_reset = ca->ca_ipl | PCC_IRQ_IEN | PCC_TIMERACK; pccintr_establish(PCCV_TIMER1, &sc->sc_profih); pccintr_establish(PCCV_TIMER2, &sc->sc_statih); break; #endif #if NMC > 0 case BUS_MC: prof_reset = ca->ca_ipl | MC_IRQ_IEN | MC_IRQ_ICLR; stat_reset = ca->ca_ipl | MC_IRQ_IEN | MC_IRQ_ICLR; mcintr_establish(MCV_TIMER1, &sc->sc_profih); mcintr_establish(MCV_TIMER2, &sc->sc_statih); break; #endif #if NPCCTWO > 0 case BUS_PCCTWO: prof_reset = ca->ca_ipl | PCC2_IRQ_IEN | PCC2_IRQ_ICLR; stat_reset = ca->ca_ipl | PCC2_IRQ_IEN | PCC2_IRQ_ICLR; pcctwointr_establish(PCC2V_TIMER1, &sc->sc_profih); pcctwointr_establish(PCC2V_TIMER2, &sc->sc_statih); break; #endif } printf("\n"); } /* * clockintr: ack intr and call hardclock */ int clockintr(arg) void *arg; { switch (clockbus) { #if NPCC > 0 case BUS_PCC: sys_pcc->pcc_t1irq = prof_reset; break; #endif #if NMC > 0 case BUS_MC: sys_mc->mc_t1irq = prof_reset; break; #endif #if NPCCTWO > 0 case BUS_PCCTWO: sys_pcc2->pcc2_t1irq = prof_reset; break; #endif } hardclock(arg); return (1); } /* * Set up real-time clock; we don't have a statistics clock at * present. */ void cpu_initclocks() { register int statint, minint; if (1000000 % hz) { printf("cannot get %d Hz clock; using 100 Hz\n", hz); hz = 100; tick = 1000000 / hz; } if (stathz == 0) stathz = hz; if (1000000 % stathz) { printf("cannot get %d Hz statclock; using 100 Hz\n", stathz); stathz = 100; } profhz = stathz; /* always */ statint = 1000000 / stathz; minint = statint / 2 + 100; while (statvar > minint) statvar >>= 1; switch (clockbus) { #if NPCC > 0 case BUS_PCC: sys_pcc->pcc_t1pload = pcc_timer_us2lim(tick); sys_pcc->pcc_t1ctl = PCC_TIMERCLEAR; sys_pcc->pcc_t1ctl = PCC_TIMERSTART; sys_pcc->pcc_t1irq = prof_reset; sys_pcc->pcc_t2pload = pcc_timer_us2lim(statint); sys_pcc->pcc_t2ctl = PCC_TIMERCLEAR; sys_pcc->pcc_t2ctl = PCC_TIMERSTART; sys_pcc->pcc_t2irq = stat_reset; break; #endif #if NMC > 0 case BUS_MC: /* profclock */ sys_mc->mc_t1ctl = 0; sys_mc->mc_t1cmp = mc_timer_us2lim(tick); sys_mc->mc_t1count = 0; sys_mc->mc_t1ctl = MC_TCTL_CEN | MC_TCTL_COC | MC_TCTL_COVF; sys_mc->mc_t1irq = prof_reset; /* statclock */ sys_mc->mc_t2ctl = 0; sys_mc->mc_t2cmp = mc_timer_us2lim(statint); sys_mc->mc_t2count = 0; sys_mc->mc_t2ctl = MC_TCTL_CEN | MC_TCTL_COC | MC_TCTL_COVF; sys_mc->mc_t2irq = stat_reset; break; #endif #if NPCCTWO > 0 case BUS_PCCTWO: /* profclock */ sys_pcc2->pcc2_t1ctl = 0; sys_pcc2->pcc2_t1cmp = pcc2_timer_us2lim(tick); sys_pcc2->pcc2_t1count = 0; sys_pcc2->pcc2_t1ctl = PCC2_TCTL_CEN | PCC2_TCTL_COC | PCC2_TCTL_COVF; sys_pcc2->pcc2_t1irq = prof_reset; /* statclock */ sys_pcc2->pcc2_t2ctl = 0; sys_pcc2->pcc2_t2cmp = pcc2_timer_us2lim(statint); sys_pcc2->pcc2_t2count = 0; sys_pcc2->pcc2_t2ctl = PCC2_TCTL_CEN | PCC2_TCTL_COC | PCC2_TCTL_COVF; sys_pcc2->pcc2_t2irq = stat_reset; break; #endif } statmin = statint - (statvar >> 1); } void setstatclockrate(newhz) int newhz; { } int statintr(cap) void *cap; { register u_long newint, r, var; switch (clockbus) { #if NPCC > 0 case BUS_PCC: sys_pcc->pcc_t2irq = stat_reset; break; #endif #if NMC > 0 case BUS_MC: sys_mc->mc_t2irq = stat_reset; break; #endif #if NPCCTWO > 0 case BUS_PCCTWO: sys_pcc2->pcc2_t2irq = stat_reset; break; #endif } statclock((struct clockframe *)cap); /* * Compute new randomized interval. The intervals are uniformly * distributed on [statint - statvar / 2, statint + statvar / 2], * and therefore have mean statint, giving a stathz frequency clock. */ var = statvar; do { r = random() & (var - 1); } while (r == 0); newint = statmin + r; switch (clockbus) { #if NPCC > 0 case BUS_PCC: sys_pcc->pcc_t2pload = pcc_timer_us2lim(newint); sys_pcc->pcc_t2ctl = PCC_TIMERCLEAR; sys_pcc->pcc_t2ctl = PCC_TIMERSTART; sys_pcc->pcc_t2irq = stat_reset; break; #endif #if NMC > 0 case BUS_MC: sys_mc->mc_t2ctl = 0; sys_mc->mc_t2cmp = mc_timer_us2lim(newint); sys_mc->mc_t2count = 0; /* should I? */ sys_mc->mc_t2irq = stat_reset; sys_mc->mc_t2ctl = MC_TCTL_CEN | MC_TCTL_COC; break; #endif #if NPCCTWO > 0 case BUS_PCCTWO: sys_pcc2->pcc2_t2ctl = 0; sys_pcc2->pcc2_t2cmp = pcc2_timer_us2lim(newint); sys_pcc2->pcc2_t2count = 0; /* should I? */ sys_pcc2->pcc2_t2irq = stat_reset; sys_pcc2->pcc2_t2ctl = PCC2_TCTL_CEN | PCC2_TCTL_COC; break; #endif } return (1); } void delay(us) int us; { #if (NPCC > 0) || (NPCCTWO > 0) volatile register int c; #endif switch (clockbus) { #if NPCC > 0 case BUS_PCC: /* * XXX MVME147 doesn't have a 3rd free-running timer, * so we use a stupid loop. Fix the code to watch t1: * the profiling timer. */ c = 2 * us; while (--c > 0) ; break; #endif #if NMC > 0 case BUS_MC: /* * Reset and restart a free-running timer 1MHz, watch * for it to reach the required count. */ sys_mc->mc_t3irq = 0; sys_mc->mc_t3ctl = 0; sys_mc->mc_t3count = 0; sys_mc->mc_t3ctl = MC_TCTL_CEN | MC_TCTL_COVF; while (sys_mc->mc_t3count < us) ; break; #endif #if NPCCTWO > 0 case BUS_PCCTWO: /* * XXX MVME167 doesn't have a 3rd free-running timer, * so we use a stupid loop. Fix the code to watch t1: * the profiling timer. */ c = 4 * us; while (--c > 0) ; break; #endif } }