/* $OpenBSD: flash.c,v 1.5 1996/04/28 11:11:50 deraadt Exp $ */ /* * Copyright (c) 1995 Theo de Raadt * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed under OpenBSD by * Theo de Raadt for Willowglen Singapore. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "mc.h" #if NMC > 0 #include #endif #include struct flashsoftc { struct device sc_dev; u_char * sc_paddr; volatile u_char * sc_vaddr; u_char sc_manu; u_char sc_ii; int sc_len; int sc_zonesize; }; void flashattach __P((struct device *, struct device *, void *)); int flashmatch __P((struct device *, void *, void *)); struct cfattach flash_ca = { sizeof(struct flashsoftc), flashmatch, flashattach }; struct cfdriver flash_cd = { NULL, "flash", DV_DULL, 0 }; int flashwritebyte __P((struct flashsoftc *sc, int addr, u_char val)); int flasherasezone __P((struct flashsoftc *sc, int addr)); struct flashii intel_flashii[] = { { "28F008SA", FLII_INTEL_28F008SA, 1024*1024, 64*1024 }, { "28F008SA-L", FLII_INTEL_28F008SA_L, 1024*1024, 64*1024 }, { NULL }, }; struct flashmanu { char *name; u_char manu; struct flashii *flashii; } flashmanu[] = { { "intel", FLMANU_INTEL, intel_flashii }, { NULL } }; int flashmatch(parent, cf, args) struct device *parent; void *cf; void *args; { struct confargs *ca = args; #ifdef MVME147 if (cputyp == CPU_147) return (0); #endif #ifdef MVME167 /* * XXX: 166 has 4 byte-wide flash rams side-by-side, and * isn't supported (yet). */ if (cputyp == CPU_166) return (0); if (cputyp == CPU_167) return (0); #endif if (badpaddr(ca->ca_paddr, 1)) return (0); /* * XXX: need to determine if it is flash or rom */ return (1); } void flashattach(parent, self, args) struct device *parent, *self; void *args; { struct flashsoftc *sc = (struct flashsoftc *)self; struct confargs *ca = args; int manu, ident; sc->sc_paddr = ca->ca_paddr; sc->sc_vaddr = mapiodev(sc->sc_paddr, NBPG); switch (cputyp) { #ifdef MVME162 case CPU_162: mc_enableflashwrite(1); break; #endif } /* read manufacturer and product identifier from flash */ sc->sc_vaddr[0] = FLCMD_RESET; sc->sc_vaddr[0] = FLCMD_READII; sc->sc_manu = sc->sc_vaddr[0]; sc->sc_ii = sc->sc_vaddr[1]; sc->sc_vaddr[0] = FLCMD_RESET; for (manu = 0; flashmanu[manu].name; manu++) if (flashmanu[manu].manu == sc->sc_manu) break; if (flashmanu[manu].name == NULL) { printf(": unknown manu 0x%02x ident %02x\n", sc->sc_manu, sc->sc_ii); return; } for (ident = 0; flashmanu[manu].flashii[ident].name; ident++) if (flashmanu[manu].flashii[ident].ii == sc->sc_ii) break; if (flashmanu[manu].flashii[ident].name == NULL) { printf(": unknown manu %s ident 0x%02x\n", flashmanu[manu].name, sc->sc_ii); return; } sc->sc_len = flashmanu[manu].flashii[ident].size; sc->sc_zonesize = flashmanu[manu].flashii[ident].zonesize; printf(": %s %s len %d", flashmanu[manu].name, flashmanu[manu].flashii[ident].name, sc->sc_len); sc->sc_vaddr[0] = FLCMD_CLEARSTAT; sc->sc_vaddr[0] = FLCMD_RESET; unmapiodev((void *)sc->sc_vaddr, NBPG); sc->sc_vaddr = mapiodev(sc->sc_paddr, sc->sc_len); if (sc->sc_vaddr == NULL) { sc->sc_len = 0; printf(" -- failed to map"); } printf("\n"); } u_char * flashsavezone(sc, start) struct flashsoftc *sc; int start; { u_char *zone; zone = (u_char *)malloc(sc->sc_zonesize, M_TEMP, M_WAITOK); if (!zone) return (NULL); sc->sc_vaddr[0] = FLCMD_RESET; bcopy((u_char *)&sc->sc_vaddr[start], zone, sc->sc_zonesize); return (zone); } int flashwritezone(sc, zone, start) struct flashsoftc *sc; u_char *zone; int start; { u_char sr; int i; for (i = 0; i < sc->sc_zonesize; i++) { if (zone[i] == 0xff) continue; sc->sc_vaddr[start + i] = FLCMD_WSETUP; sc->sc_vaddr[start + i] = zone[i]; do { sc->sc_vaddr[0] = FLCMD_READSTAT; sr = sc->sc_vaddr[0]; } while (sr & FLSR_WSMS == 0); if (sr & FLSR_BWS) return (i); /* write failed on this byte! */ sc->sc_vaddr[0] = FLCMD_RESET; } free(zone, M_TEMP); return (0); } int flasherasezone(sc, addr) struct flashsoftc *sc; int addr; { u_char sr; printf("erasing zone at %d\n", addr); sc->sc_vaddr[addr] = FLCMD_ESETUP; sc->sc_vaddr[addr] = FLCMD_ECONFIRM; sc->sc_vaddr[0] = FLCMD_READSTAT; sr = sc->sc_vaddr[0]; while ((sr & FLSR_WSMS) == 0) { sc->sc_vaddr[0] = FLCMD_READSTAT; sr = sc->sc_vaddr[0]; } printf("sr=%2x\n", sr); sc->sc_vaddr[0] = FLCMD_RESET; if (sr & FLSR_ES) return (-1); return (0); } /* * Should add some light retry code. If a write fails see if an * erase helps the situation... eventually flash rams become * useless but perhaps we can get just one more cycle out of it. */ int flashwritebyte(sc, addr, val) struct flashsoftc *sc; int addr; u_char val; { u_char sr; sc->sc_vaddr[addr] = FLCMD_CLEARSTAT; sr = sc->sc_vaddr[0]; sc->sc_vaddr[addr] = FLCMD_WSETUP; sc->sc_vaddr[addr] = val; delay(9); do { sr = sc->sc_vaddr[addr]; } while ((sr & FLSR_WSMS) == 0); printf("write status %2x\n", sr); sc->sc_vaddr[0] = FLCMD_RESET; if (sr & FLSR_BWS) return (-1); /* write failed! */ return (0); } /*ARGSUSED*/ int flashopen(dev, flag, mode) dev_t dev; int flag, mode; { if (minor(dev) >= flash_cd.cd_ndevs || flash_cd.cd_devs[minor(dev)] == NULL) return (ENODEV); return (0); } /*ARGSUSED*/ int flashclose(dev, flag, mode) dev_t dev; int flag, mode; { return (0); } /*ARGSUSED*/ int flashioctl(dev, cmd, data, flag, p) dev_t dev; u_char *data; int cmd, flag; struct proc *p; { int unit = minor(dev); struct flashsoftc *sc = (struct flashsoftc *) flash_cd.cd_devs[unit]; int error = 0; switch (cmd) { case MIOCGSIZ: *(int *)data = sc->sc_len; break; default: error = ENOTTY; break; } return (error); } /*ARGSUSED*/ int flashread(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { int unit = minor(dev); struct flashsoftc *sc = (struct flashsoftc *) flash_cd.cd_devs[unit]; register vm_offset_t v; register int c; register struct iovec *iov; int error = 0; while (uio->uio_resid > 0 && error == 0) { iov = uio->uio_iov; if (iov->iov_len == 0) { uio->uio_iov++; uio->uio_iovcnt--; if (uio->uio_iovcnt < 0) panic("flashrw"); continue; } v = uio->uio_offset; c = min(iov->iov_len, MAXPHYS); if (v + c > sc->sc_len) c = sc->sc_len - v; /* till end of FLASH */ if (c == 0) return (0); error = uiomove((u_char *)sc->sc_vaddr + v, c, uio); } return (error); } /*ARGSUSED*/ int flashwrite(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { int unit = minor(dev); struct flashsoftc *sc = (struct flashsoftc *) flash_cd.cd_devs[unit]; register vm_offset_t v; register int c, i, r; register struct iovec *iov; int error = 0; u_char *cmpbuf; int neederase = 0, needwrite = 0; int zonestart, zoneoff; cmpbuf = (u_char *)malloc(sc->sc_zonesize, M_TEMP, M_WAITOK); if (!cmpbuf) return (ENOMEM); while (uio->uio_resid > 0 && error == 0) { iov = uio->uio_iov; if (iov->iov_len == 0) { uio->uio_iov++; uio->uio_iovcnt--; if (uio->uio_iovcnt < 0) panic("flashrw"); continue; } /* * constrain to be at most a zone in size, and * aligned to be within that one zone only. */ v = uio->uio_offset; zonestart = v & ~(sc->sc_zonesize - 1); zoneoff = v & (sc->sc_zonesize - 1); c = min(iov->iov_len, MAXPHYS); if (v + c > sc->sc_len) c = sc->sc_len - v; /* till end of FLASH */ if (c > sc->sc_zonesize - zoneoff) c = sc->sc_zonesize - zoneoff; /* till end of zone */ if (c == 0) return (0); error = uiomove((u_char *)cmpbuf, c, uio); /* * compare to see if we are going to need a block erase * operation. */ sc->sc_vaddr[0] = FLCMD_RESET; for (i = 0; i < c; i++) { u_char x = sc->sc_vaddr[v + i]; if (cmpbuf[i] & ~x) neederase = 1; if (cmpbuf[i] != x) needwrite = 1; } if (needwrite && !neederase) { /* * we don't need to erase. all the bytes being * written (thankfully) set bits. */ for (i = 0; i < c; i++) { if (cmpbuf[i] == sc->sc_vaddr[v + i]) continue; r = flashwritebyte(sc, v + i, cmpbuf[i]); if (r == 0) continue; /* * this doesn't make sense. we * thought we didn't need to erase, * but a write failed. let's try an * erase operation.. */ printf("%s: failed write at %d, trying erase\n", sc->sc_dev.dv_xname, i); goto tryerase; } } else if (neederase) { u_char *mem; tryerase: mem = flashsavezone(sc, zonestart); for (i = 0; i < c; i++) mem[zoneoff + i] = cmpbuf[i]; flasherasezone(sc, zonestart); r = flashwritezone(sc, mem, zonestart); if (r) { printf("%s: failed at offset %x\n", sc->sc_dev.dv_xname, r); free(mem, M_TEMP); error = EIO; } } } free(cmpbuf, M_TEMP); return (error); } int flashmmap(dev, off, prot) dev_t dev; int off, prot; { int unit = minor(dev); struct flashsoftc *sc = (struct flashsoftc *) flash_cd.cd_devs[unit]; /* allow access only in RAM */ if (off > sc->sc_len) return (-1); return (m68k_btop(sc->sc_paddr + off)); }