/* $OpenBSD: locore.s,v 1.19 1998/09/06 20:10:53 millert Exp $ */ /* * Copyright (c) 1995 Theo de Raadt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed under OpenBSD by * Theo de Raadt for Willowglen Singapore. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Copyright (c) 1988 University of Utah. * Copyright (c) 1980, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah $Hdr: locore.s 1.66 92/12/22$ * * @(#)locore.s 8.6 (Berkeley) 5/27/94 */ #include "assym.h" #include "ksyms.h" #include #include /* * Temporary stack for a variety of purposes. * Try and make this the first thing is the data segment so it * is page aligned. Note that if we overflow here, we run into * our text segment. */ .data .space NBPG .globl tmpstk tmpstk: #define RELOC(var, ar) \ lea var,ar /* * Initialization * * The bootstrap loader loads us in starting at 0, and VBR is non-zero. * On entry, args on stack are boot device, boot filename, console unit, * boot flags (howto), boot device name, filesystem type name. */ .comm _lowram,4 .comm _esym,4 .comm _emini,4 .comm _smini,4 .comm _needprom,4 .comm _promvbr,4 .comm _promcall,4 .text .globl _edata .globl _etext,_end .globl start .globl _kernel_text _kernel_text: start: movw #PSL_HIGHIPL,sr | no interrupts movl #0,a5 | RAM starts at 0 movl sp@(4), d7 | get boothowto movl sp@(8), d6 | get bootaddr movl sp@(12),d5 | get bootctrllun movl sp@(16),d4 | get bootdevlun movl sp@(20),d3 | get bootpart movl sp@(24),d2 | get esyms /* note: d2-d7 in use */ RELOC(tmpstk, a0) movl a0,sp | give ourselves a temporary stack RELOC(_edata, a0) | clear out BSS movl #_end-4,d0 | (must be <= 256 kB) subl #_edata,d0 lsrl #2,d0 1: clrl a0@+ dbra d0,1b movc vbr,d0 | save prom's trap #15 vector RELOC(_promvbr, a0) movl d0, a0@ RELOC(_esym, a0) movl d2,a0@ | store end of symbol table /* note: d2 now free, d3-d7 still in use */ RELOC(_lowram, a0) movl a5,a0@ | store start of physical memory clrl sp@- trap #15 .short MVMEPROM_GETBRDID movl sp@+, a1 movl #SIZEOF_MVMEPROM_BRDID, d0 | copy to local variables RELOC(_brdid, a0) 1: movb a1@+, a0@+ subql #1, d0 bne 1b clrl d0 RELOC(_brdid, a1) movw a1@(MVMEPROM_BRDID_MODEL), d0 RELOC(_cputyp, a0) movl d0, a0@ | init _cputyp #ifdef MVME147 cmpw #CPU_147, d0 beq is147 #endif #ifdef MVME162 cmpw #CPU_162, d0 beq is162 #endif #ifdef MVME167 cmpw #CPU_166, d0 beq is167 cmpw #CPU_167, d0 beq is167 #endif #ifdef MVME177 cmpw #CPU_177, d0 beq is177 #endif .data notsup: .ascii "kernel does not support this model." notsupend: .even .text | first we bitch, then we die. movl #notsupend, sp@- movl #notsup, sp@- trap #15 .short MVMEPROM_OUTSTRCRLF addql #8,sp trap #15 .short MVMEPROM_EXIT | return to m68kbug /*NOTREACHED */ #ifdef MVME147 is147: RELOC(_mmutype, a0) | no, we have 68030 movl #MMU_68030,a0@ | set to reflect 68030 PMMU RELOC(_cputype, a0) | no, we have 68030 movl #CPU_68030,a0@ | set to reflect 68030 CPU movl #CACHE_OFF,d0 movc d0,cacr | clear and disable on-chip cache(s) movb #0, 0xfffe1026 | XXX serial interrupt off movb #0, 0xfffe1018 | XXX timer 1 off movb #0, 0xfffe1028 | XXX ethernet off movl #0xfffe0000, a0 | mvme147 nvram base | move nvram component of etheraddr (only last 3 bytes) RELOC(_myea, a1) movw a0@(NVRAM_147_ETHER+0), a1@(3+0) movb a0@(NVRAM_147_ETHER+2), a1@(3+2) movl a0@(NVRAM_147_EMEM), d1 | pass memory size RELOC(_iiomapsize, a1) movl #INTIOSIZE_147, a1@ RELOC(_iiomapbase, a1) movl #INTIOBASE_147, a1@ bra Lstart1 #endif #ifdef MVME162 is162: #if 0 | the following 3 things are "just in case". they won't make | the kernel work properly, but they will at least let it get | far enough that you can figure out that something had an | interrupt pending. which the bootrom shouldn't allow, i don't | think.. clrb 0xfff42002 | XXX MCchip irq off clrl 0xfff42018 | XXX MCchip timers irq off clrb 0xfff4201d | XXX MCchip scc irq off #endif RELOC(_memsize162, a1) | how much memory? jbsr a1@ movl d0, d2 RELOC(_mmutype, a0) movl #MMU_68040,a0@ | with a 68040 MMU RELOC(_cputype, a0) | no, we have 68040 movl #CPU_68040,a0@ | set to reflect 68040 CPU RELOC(_fputype, a0) movl #FPU_68040,a0@ | and a 68040 FPU bra is16x #endif #ifdef MVME167 is167: | RELOC(_needprom,a0) | this machine needs the prom mapped! | movl #1,a0@ RELOC(_memsize1x7, a1) | how much memory? jbsr a1@ movl d0, d2 RELOC(_mmutype, a0) movl #MMU_68040,a0@ | with a 68040 MMU RELOC(_cputype, a0) | no, we have 68040 movl #CPU_68040,a0@ | set to reflect 68040 CPU RELOC(_fputype, a0) movl #FPU_68040,a0@ | and a 68040 FPU bra is16x #endif #ifdef MVME177 is177: | RELOC(_needprom,a0) | this machine needs the prom mapped! | movl #1,a0@ RELOC(_memsize1x7, a1) | how much memory? jbsr a1@ movl d0, d2 RELOC(_mmutype, a0) movl #MMU_68060,a0@ | with a 68060 MMU RELOC(_cputype, a0) | no, we have 68060 movl #CPU_68060,a0@ | set to reflect 68060 CPU bra is16x #endif #if defined(MVME162) || defined(MVME167) || defined(MVME177) .data #define ROMPKT_LEN 200 .comm _rompkt, ROMPKT_LEN .even .text is16x: RELOC(_iiomapsize, a1) movl #INTIOSIZE_162, a1@ RELOC(_iiomapbase, a1) movl #INTIOBASE_162, a1@ /* get ethernet address */ RELOC(_rompkt, a0) | build a .NETCTRL packet movb #0, a0@(NETCTRL_DEV) | onboard ethernet movb #0, a0@(NETCTRL_CTRL) | onboard ethernet movl #NETCTRLCMD_GETETHER, a0@(NETCTRL_CMD) RELOC(_myea, a1) movl a1, a0@(NETCTRL_ADDR) | where to put it movl #6, a0@(NETCTRL_LEN) | it is 6 bytes long movl a0, sp@- trap #15 .short MVMEPROM_NETCTRL | ask the rom addl #4, sp #if 0 /* * get memory size using ENVIRON. unfortunately i've not managed * to get this working. */ RELOC(_rompkt, a0) movl #ENVIRONCMD_READ, sp@- | request environment information movl #ROMPKT_LEN, sp@- | max length movl a0, sp@- | point to info packet trap #15 .short MVMEPROM_ENVIRON | ask the rom addl #12, sp | XXX should check return values clrl d2 | memsize = 0 1: clrl d0 movb a0@+, d0 | look for a "memsize" chunk in the cmpb #ENVIRONTYPE_EOL, d0 | environment beq 3f cmpb #ENVIRONTYPE_MEMSIZE, d0 beq 2f movb a0@+, d0 addl d0, a0 bra 1b 2: movl a0@(7), d2 | XXX memory size (fix @(7) offset!) 3: #endif | if memory size is unknown, print a diagnostic and make an | assumption movl d2, d1 cmpl #0, d1 bne Lstart1 movl #unkmemend, sp@- movl #unkmem, sp@- trap #15 .short MVMEPROM_OUTSTRCRLF addql #8,sp movl #4*1024*1024, d1 | XXX assume 4M of ram bra Lstart1 .data unkmem: .ascii "could not figure out how much memory; assuming 4M." unkmemend: .even .text #endif Lstart1: /* initialize source/destination control registers for movs */ moveq #FC_USERD,d0 | user space movc d0,sfc | as source movc d0,dfc | and destination of transfers moveq #PGSHIFT,d2 lsrl d2,d1 | convert to page (click) number RELOC(_maxmem, a0) movl d1,a0@ | save as maxmem movl a5,d0 | lowram value from ROM via boot lsrl d2,d0 | convert to page number subl d0,d1 | compute amount of RAM present RELOC(_physmem, a0) movl d1,a0@ | and physmem /* configure kernel and proc0 VA space so we can get going */ .globl _Sysseg, _pmap_bootstrap, _avail_start #if defined(DDB) || NKSYMS > 0 RELOC(_esym,a0) | end of static kernel test/data/syms movl a0@,d2 jne Lstart2 #endif movl #_end,d2 | end of static kernel text/data Lstart2: addl #NBPG-1,d2 andl #PG_FRAME,d2 | round to a page movl d2,a4 addl a5,a4 | convert to PA #if 0 | XXX clear from end-of-kernel to 1M, as a workaround for an | inane pmap_bootstrap bug I cannot find (68040-specific) movl a4,a0 movl #1024*1024,d0 cmpl a0,d0 | end of kernel is beyond 1M? jlt 2f subl a0,d0 1: clrb a0@+ subql #1,d0 bne 1b 2: #endif pea a5@ | firstpa pea a4@ | nextpa RELOC(_pmap_bootstrap,a0) jbsr a0@ | pmap_bootstrap(firstpa, nextpa) addql #8,sp /* * Enable the MMU. * Since the kernel is mapped logical == physical, we just turn it on. */ RELOC(_Sysseg, a0) | system segment table addr movl a0@,d1 | read value (a KVA) addl a5,d1 | convert to PA RELOC(_mmutype, a0) cmpl #MMU_68040,a0@ | 68040? jne Lmotommu1 | no, skip .long 0x4e7b1807 | movc d1,srp jra Lstploaddone Lmotommu1: RELOC(_protorp, a0) movl #0x80000202,a0@ | nolimit + share global + 4 byte PTEs movl d1,a0@(4) | + segtable address pmove a0@,srp | load the supervisor root pointer movl #0x80000002,a0@ | reinit upper half for CRP loads Lstploaddone: RELOC(_mmutype, a0) cmpl #MMU_68040,a0@ | 68040? jne Lmotommu2 | no, skip RELOC(_needprom,a0) cmpl #0,a0@ beq 1f /* * this machine needs the prom mapped. we use the translation * registers to map it in.. and the ram it needs. */ movel #0xff00a044,d0 | map top 16meg 1/1 for bug eprom exe .long 0x4e7b0004 | movc d0,itt0 moveq #0,d0 | ensure itt1 is disabled .long 0x4e7b0005 | movc d0,itt1 movel #0xff00a040,d0 | map top 16meg 1/1 for bug io access .long 0x4e7b0006 | movc d0,dtt0 moveq #0,d0 | ensure dtt1 is disabled .long 0x4e7b0007 | movc d0,dtt1 bra 2f 1: moveq #0,d0 | ensure TT regs are disabled .long 0x4e7b0004 | movc d0,itt0 .long 0x4e7b0005 | movc d0,itt1 .long 0x4e7b0006 | movc d0,dtt0 .long 0x4e7b0007 | movc d0,dtt1 2: .word 0xf4d8 | cinva bc .word 0xf518 | pflusha movl #0x8000,d0 .long 0x4e7b0003 | movc d0,tc movl #0x80008000,d0 movc d0,cacr | turn on both caches jmp Lenab1 Lmotommu2: movl #0x82c0aa00,a2@ | value to load TC with pmove a2@,tc | load it Lenab1: /* * Should be running mapped from this point on */ /* select the software page size now */ lea tmpstk,sp | temporary stack jbsr _vm_set_page_size | select software page size /* set kernel stack, user SP, and initial pcb */ movl _proc0paddr,a1 | get proc0 pcb addr lea a1@(USPACE-4),sp | set kernel stack to end of area movl #USRSTACK-4,a2 movl a2,usp | init user SP movl a1,_curpcb | proc0 is running tstl _fputype | Have an FPU? jeq Lenab2 | No, skip. clrl a1@(PCB_FPCTX) | ensure null FP context movl a1,sp@- jbsr _m68881_restore | restore it (does not kill a1) addql #4,sp Lenab2: /* flush TLB and turn on caches */ jbsr _TBIA | invalidate TLB cmpl #MMU_68040,_mmutype | 68040? jeq Lnocache0 | yes, cache already on movl #CACHE_ON,d0 movc d0,cacr | clear cache(s) Lnocache0: /* final setup for C code */ movl #_vectab,d2 | set VBR movc d2,vbr movw #PSL_LOWIPL,sr | lower SPL movl d3, _bootpart | save bootpart movl d4, _bootdevlun | save bootdevlun movl d5, _bootctrllun | save bootctrllun movl d6, _bootaddr | save bootaddr movl d7, _boothowto | save boothowto /* d3-d7 now free */ /* Final setup for call to main(). */ jbsr _C_LABEL(mvme68k_init) /* * Create a fake exception frame so that cpu_fork() can copy it. * main() nevers returns; we exit to user mode from a forked process * later on. */ clrw sp@- | vector offset/frame type clrl sp@- | PC - filled in by "execve" movw #PSL_USER,sp@- | in user mode clrl sp@- | stack adjust count and padding lea sp@(-64),sp | construct space for D0-D7/A0-A7 lea _proc0,a0 | save pointer to frame movl sp,a0@(P_MD_REGS) | in proc0.p_md.md_regs jra _main | main() pea 1f jbsr _panic 1: .asciz "main returned" .even .globl _proc_trampoline _proc_trampoline: movl a3,sp@- jbsr a2@ addql #4,sp movl sp@(FR_SP),a0 | grab and load movl a0,usp | user SP moveml sp@+,#0x7FFF | restore most user regs addql #8,sp | toss SP and stack adjust jra rei | and return /* * Signal "trampoline" code (18 bytes). Invoked from RTE setup by sendsig(). * * Stack looks like: * * sp+0 -> signal number * sp+4 pointer to siginfo (sip) * sp+8 pointer to signal context frame (scp) * sp+12 address of handler * sp+16 saved hardware state * . * . * scp+0-> beginning of signal context frame */ .globl _sigcode, _esigcode, _sigcodetrap .data _sigcode: movl sp@(12),a0 | signal handler addr (4 bytes) jsr a0@ | call signal handler (2 bytes) addql #4,sp | pop signo (2 bytes) _sigcodetrap: trap #1 | special syscall entry (2 bytes) movl d0,sp@(4) | save errno (4 bytes) moveq #1,d0 | syscall == exit (2 bytes) trap #0 | exit(errno) (2 bytes) .align 2 _esigcode: .text /* * Do a dump. * Called by auto-restart. */ .globl _dumpsys .globl _doadump _doadump: jbsr _dumpsys jbsr _doboot /*NOTREACHED*/ /* * Trap/interrupt vector routines */ .globl _trap, _nofault, _longjmp _buserr: tstl _nofault | device probe? jeq Lberr | no, handle as usual movl _nofault,sp@- | yes, jbsr _longjmp | longjmp(nofault) Lberr: #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040? jne _addrerr | no, skip clrl sp@- | stack adjust count moveml #0xFFFF,sp@- | save user registers movl usp,a0 | save the user SP movl a0,sp@(FR_SP) | in the savearea lea sp@(FR_HW),a1 | grab base of HW berr frame moveq #0,d0 movw a1@(12),d0 | grab SSW movl a1@(20),d1 | and fault VA btst #11,d0 | check for mis-aligned access jeq Lberr2 | no, skip addl #3,d1 | yes, get into next page andl #PG_FRAME,d1 | and truncate Lberr2: movl d1,sp@- | push fault VA movl d0,sp@- | and padded SSW btst #10,d0 | ATC bit set? jeq Lisberr | no, must be a real bus error movc dfc,d1 | yes, get MMU fault movc d0,dfc | store faulting function code movl sp@(4),a0 | get faulting address .word 0xf568 | ptestr a0@ movc d1,dfc .long 0x4e7a0805 | movc mmusr,d0 movw d0,sp@ | save (ONLY LOW 16 BITS!) jra Lismerr #endif _addrerr: clrl sp@- | stack adjust count moveml #0xFFFF,sp@- | save user registers movl usp,a0 | save the user SP movl a0,sp@(FR_SP) | in the savearea lea sp@(FR_HW),a1 | grab base of HW berr frame #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040? jne Lbenot040 | no, skip movl a1@(8),sp@- | yes, push fault address clrl sp@- | no SSW for address fault jra Lisaerr | go deal with it Lbenot040: #endif moveq #0,d0 movw a1@(10),d0 | grab SSW for fault processing btst #12,d0 | RB set? jeq LbeX0 | no, test RC bset #14,d0 | yes, must set FB movw d0,a1@(10) | for hardware too LbeX0: btst #13,d0 | RC set? jeq LbeX1 | no, skip bset #15,d0 | yes, must set FC movw d0,a1@(10) | for hardware too LbeX1: btst #8,d0 | data fault? jeq Lbe0 | no, check for hard cases movl a1@(16),d1 | fault address is as given in frame jra Lbe10 | thats it Lbe0: btst #4,a1@(6) | long (type B) stack frame? jne Lbe4 | yes, go handle movl a1@(2),d1 | no, can use save PC btst #14,d0 | FB set? jeq Lbe3 | no, try FC addql #4,d1 | yes, adjust address jra Lbe10 | done Lbe3: btst #15,d0 | FC set? jeq Lbe10 | no, done addql #2,d1 | yes, adjust address jra Lbe10 | done Lbe4: movl a1@(36),d1 | long format, use stage B address btst #15,d0 | FC set? jeq Lbe10 | no, all done subql #2,d1 | yes, adjust address Lbe10: movl d1,sp@- | push fault VA movl d0,sp@- | and padded SSW movw a1@(6),d0 | get frame format/vector offset andw #0x0FFF,d0 | clear out frame format cmpw #12,d0 | address error vector? jeq Lisaerr | yes, go to it movl d1,a0 | fault address movl sp@,d0 | function code from ssw btst #8,d0 | data fault? jne Lbe10a movql #1,d0 | user program access FC | (we dont seperate data/program) btst #5,a1@ | supervisor mode? jeq Lbe10a | if no, done movql #5,d0 | else supervisor program access Lbe10a: ptestr d0,a0@,#7 | do a table search pmove psr,sp@ | save result movb sp@,d1 btst #2,d1 | invalid (incl. limit viol. and berr)? jeq Lmightnotbemerr | no -> wp check btst #7,d1 | is it MMU table berr? jeq Lismerr | no, must be fast jra Lisberr1 | real bus err needs not be fast. Lmightnotbemerr: btst #3,d1 | write protect bit set? jeq Lisberr1 | no: must be bus error movl sp@,d0 | ssw into low word of d0 andw #0xc0,d0 | Write protect is set on page: cmpw #0x40,d0 | was it read cycle? jeq Lisberr1 | yes, was not WPE, must be bus err Lismerr: movl #T_MMUFLT,sp@- | show that we are an MMU fault jra Ltrapnstkadj | and deal with it Lisaerr: movl #T_ADDRERR,sp@- | mark address error jra Ltrapnstkadj | and deal with it Lisberr1: clrw sp@ | re-clear pad word Lisberr: movl #T_BUSERR,sp@- | mark bus error Ltrapnstkadj: jbsr _trap | handle the error lea sp@(12),sp | pop value args movl sp@(FR_SP),a0 | restore user SP movl a0,usp | from save area movw sp@(FR_ADJ),d0 | need to adjust stack? jne Lstkadj | yes, go to it moveml sp@+,#0x7FFF | no, restore most user regs addql #8,sp | toss SSP and stkadj jra rei | all done Lstkadj: lea sp@(FR_HW),a1 | pointer to HW frame addql #8,a1 | source pointer movl a1,a0 | source addw d0,a0 | + hole size = dest pointer movl a1@-,a0@- | copy movl a1@-,a0@- | 8 bytes movl a0,sp@(FR_SP) | new SSP moveml sp@+,#0x7FFF | restore user registers movl sp@,sp | and our SP jra rei | all done /* * FP exceptions. */ _fpfline: #if defined(M68040) cmpl #FPU_68040,_fputype | 68040 FPU? jne Lfp_unimp | no, skip FPSP cmpw #0x202c,sp@(6) | format type 2? jne _illinst | no, not an FP emulation Ldofp_unimp: #ifdef FPSP .globl fpsp_unimp jmp fpsp_unimp | yes, go handle it #endif Lfp_unimp: #endif/* M68040 */ #ifdef FPU_EMULATE clrl sp@- | stack adjust count moveml #0xFFFF,sp@- | save registers moveq #T_FPEMULI,d0 | denote as FP emulation trap jra fault | do it #else jra _illinst #endif _fpunsupp: #if defined(M68040) cmpl #FPU_68040,_fputype | 68040 FPU? jne _illinst | no, treat as illinst #ifdef FPSP .globl fpsp_unsupp jmp fpsp_unsupp | yes, go handle it #endif Lfp_unsupp: #endif /* M68040 */ #ifdef FPU_EMULATE clrl sp@- | stack adjust count moveml #0xFFFF,sp@- | save registers moveq #T_FPEMULD,d0 | denote as FP emulation trap jra fault | do it #else jra _illinst #endif /* * Handles all other FP coprocessor exceptions. * Note that since some FP exceptions generate mid-instruction frames * and may cause signal delivery, we need to test for stack adjustment * after the trap call. */ .globl _fpfault _fpfault: clrl sp@- | stack adjust count moveml #0xFFFF,sp@- | save user registers movl usp,a0 | and save movl a0,sp@(FR_SP) | the user stack pointer clrl sp@- | no VA arg movl _curpcb,a0 | current pcb lea a0@(PCB_FPCTX),a0 | address of FP savearea fsave a0@ | save state #if defined(M68040) || defined(M68060) /* always null state frame on 68040, 68060 */ cmpl #CPU_68040,_cputype jle Lfptnull #endif tstb a0@ | null state frame? jeq Lfptnull | yes, safe clrw d0 | no, need to tweak BIU movb a0@(1),d0 | get frame size bset #3,a0@(0,d0:w) | set exc_pend bit of BIU Lfptnull: fmovem fpsr,sp@- | push fpsr as code argument frestore a0@ | restore state movl #T_FPERR,sp@- | push type arg jra Ltrapnstkadj | call trap and deal with stack cleanup /* * Coprocessor and format errors can generate mid-instruction stack * frames and cause signal delivery hence we need to check for potential * stack adjustment. */ _coperr: clrl sp@- | stack adjust count moveml #0xFFFF,sp@- movl usp,a0 | get and save movl a0,sp@(FR_SP) | the user stack pointer clrl sp@- | no VA arg clrl sp@- | or code arg movl #T_COPERR,sp@- | push trap type jra Ltrapnstkadj | call trap and deal with stack adjustments _fmterr: clrl sp@- | stack adjust count moveml #0xFFFF,sp@- movl usp,a0 | get and save movl a0,sp@(FR_SP) | the user stack pointer clrl sp@- | no VA arg clrl sp@- | or code arg movl #T_FMTERR,sp@- | push trap type jra Ltrapnstkadj | call trap and deal with stack adjustments /* * Other exceptions only cause four and six word stack frame and require * no post-trap stack adjustment. */ _illinst: clrl sp@- moveml #0xFFFF,sp@- moveq #T_ILLINST,d0 jra fault _zerodiv: clrl sp@- moveml #0xFFFF,sp@- moveq #T_ZERODIV,d0 jra fault _chkinst: clrl sp@- moveml #0xFFFF,sp@- moveq #T_CHKINST,d0 jra fault _trapvinst: clrl sp@- moveml #0xFFFF,sp@- moveq #T_TRAPVINST,d0 jra fault _privinst: clrl sp@- moveml #0xFFFF,sp@- moveq #T_PRIVINST,d0 jra fault .globl fault fault: movl usp,a0 | get and save movl a0,sp@(FR_SP) | the user stack pointer clrl sp@- | no VA arg clrl sp@- | or code arg movl d0,sp@- | push trap type jbsr _trap | handle trap lea sp@(12),sp | pop value args movl sp@(FR_SP),a0 | restore movl a0,usp | user SP moveml sp@+,#0x7FFF | restore most user regs addql #8,sp | pop SP and stack adjust jra rei | all done .globl _hardtrap, _hardintr _hardtrap: moveml #0xC0C0,sp@- | save scratch regs lea sp@(16),a1 | get pointer to frame movl a1,sp@- movw sp@(26),d0 movl d0,sp@- | push exception vector info movl sp@(26),sp@- | and PC jbsr _hardintr | doit lea sp@(12),sp | pop args moveml sp@+,#0x0303 | restore regs jra rei | all done .globl _straytrap _badtrap: moveml #0xC0C0,sp@- | save scratch regs movw sp@(22),sp@- | push exception vector info clrw sp@- movl sp@(22),sp@- | and PC jbsr _straytrap | report addql #8,sp | pop args moveml sp@+,#0x0303 | restore regs jra rei | all done .globl _syscall _trap0: clrl sp@- | stack adjust count moveml #0xFFFF,sp@- | save user registers movl usp,a0 | save the user SP movl a0,sp@(FR_SP) | in the savearea movl d0,sp@- | push syscall number jbsr _syscall | handle it addql #4,sp | pop syscall arg tstl _astpending jne Lrei2 tstb _ssir jeq Ltrap1 movw #SPL1,sr tstb _ssir jne Lsir1 Ltrap1: movl sp@(FR_SP),a0 | grab and restore movl a0,usp | user SP moveml sp@+,#0x7FFF | restore most registers addql #8,sp | pop SP and stack adjust rte /* * Trap 1 - sigreturn */ _trap1: jra _ASM_LABEL(sigreturn) /* * Trap 2 - trace trap */ _trap2: jra _C_LABEL(trace) /* * Trap 12 is the entry point for the cachectl "syscall" (both HPUX & BSD) * cachectl(command, addr, length) * command in d0, addr in a1, length in d1 */ .globl _cachectl _trap12: movl d1,sp@- | push length movl a1,sp@- | push addr movl d0,sp@- | push command jbsr _cachectl | do it lea sp@(12),sp | pop args jra rei | all done /* * Trap 15 is used for: * - KGDB traps * - trace traps for SUN binaries (not fully supported yet) * - calling the prom, but only from the kernel * We just pass it on and let trap() sort it all out */ _trap15: clrl sp@- moveml #0xFFFF,sp@- tstl _promcall jeq L_notpromcall moveml sp@+,#0xFFFF addql #4, sp | unwind stack to put to known value | this routine is from the 147 BUG manual | currently save and restore are excessive. subql #4,sp link a6,#0 moveml #0xFFFE,sp@- movl _promvbr,a0 movw a6@(14),d0 andl #0xfff,d0 movl a0@(d0:w),a6@(4) moveml sp@+,#0x7FFF unlk a6 rts | really jumps to the bug trap handler L_notpromcall: #ifdef KGDB moveq #T_TRAP15,d0 movw sp@(FR_HW),d1 | get PSW andw #PSL_S,d1 | from user mode? jeq fault | yes, just a regular fault movl d0,sp@- .globl _kgdb_trap_glue jbsr _kgdb_trap_glue | returns if no debugger addl #4,sp #endif moveq #T_TRAP15,d0 jra fault /* * Hit a breakpoint (trap 1 or 2) instruction. * Push the code and treat as a normal fault. */ _trace: clrl sp@- moveml #0xFFFF,sp@- #ifdef KGDB moveq #T_TRACE,d0 movw sp@(FR_HW),d1 | get SSW andw #PSL_S,d1 | from user mode? jeq fault | no, regular fault movl d0,sp@- jbsr _kgdb_trap_glue | returns if no debugger addl #4,sp #endif moveq #T_TRACE,d0 jra fault #include /* * Interrupt handlers. * No device interrupts are auto-vectored. */ _spurintr: addql #1,_intrcnt+0 addql #1,_cnt+V_INTR jra rei /* * Emulation of VAX REI instruction. * * This code deals with checking for and servicing ASTs * (profiling, scheduling) and software interrupts (network, softclock). * We check for ASTs first, just like the VAX. To avoid excess overhead * the T_ASTFLT handling code will also check for software interrupts so we * do not have to do it here. After identifing that we need an AST we * drop the IPL to allow device interrupts. * * This code is complicated by the fact that sendsig may have been called * necessitating a stack cleanup. */ .comm _ssir,1 .globl _astpending .globl rei rei: tstl _astpending | AST pending? jeq Lchksir | no, go check for SIR Lrei1: btst #5,sp@ | yes, are we returning to user mode? jne Lchksir | no, go check for SIR movw #PSL_LOWIPL,sr | lower SPL clrl sp@- | stack adjust moveml #0xFFFF,sp@- | save all registers movl usp,a1 | including movl a1,sp@(FR_SP) | the users SP Lrei2: clrl sp@- | VA == none clrl sp@- | code == none movl #T_ASTFLT,sp@- | type == async system trap jbsr _trap | go handle it lea sp@(12),sp | pop value args movl sp@(FR_SP),a0 | restore user SP movl a0,usp | from save area movw sp@(FR_ADJ),d0 | need to adjust stack? jne Laststkadj | yes, go to it moveml sp@+,#0x7FFF | no, restore most user regs addql #8,sp | toss SP and stack adjust rte | and do real RTE Laststkadj: lea sp@(FR_HW),a1 | pointer to HW frame addql #8,a1 | source pointer movl a1,a0 | source addw d0,a0 | + hole size = dest pointer movl a1@-,a0@- | copy movl a1@-,a0@- | 8 bytes movl a0,sp@(FR_SP) | new SSP moveml sp@+,#0x7FFF | restore user registers movl sp@,sp | and our SP rte | and do real RTE Lchksir: tstb _ssir | SIR pending? jeq Ldorte | no, all done movl d0,sp@- | need a scratch register movw sp@(4),d0 | get SR andw #PSL_IPL7,d0 | mask all but IPL jne Lnosir | came from interrupt, no can do movl sp@+,d0 | restore scratch register Lgotsir: movw #SPL1,sr | prevent others from servicing int tstb _ssir | too late? jeq Ldorte | yes, oh well... clrl sp@- | stack adjust moveml #0xFFFF,sp@- | save all registers movl usp,a1 | including movl a1,sp@(FR_SP) | the users SP Lsir1: clrl sp@- | VA == none clrl sp@- | code == none movl #T_SSIR,sp@- | type == software interrupt jbsr _trap | go handle it lea sp@(12),sp | pop value args movl sp@(FR_SP),a0 | restore movl a0,usp | user SP moveml sp@+,#0x7FFF | and all remaining registers addql #8,sp | pop SP and stack adjust rte Lnosir: movl sp@+,d0 | restore scratch register Ldorte: rte | real return /* Use standard m68k support. */ #include /* * The following primitives manipulate the run queues. _whichqs tells which * of the 32 queues _qs have processes in them. Setrunqueue puts processes * into queues, Remrq removes them from queues. The running process is on * no queue, other processes are on a queue related to p->p_priority, divided * by 4 actually to shrink the 0-127 range of priorities into the 32 available * queues. */ .globl _whichqs,_qs,_cnt,_panic .globl _curproc,_want_resched /* * Setrunqueue(p) * * Call should be made at spl6(), and p->p_stat should be SRUN */ ENTRY(setrunqueue) movl sp@(4),a0 #ifdef DIAGNOSTIC tstl a0@(P_BACK) jne Lset1 tstl a0@(P_WCHAN) jne Lset1 cmpb #SRUN,a0@(P_STAT) jne Lset1 #endif clrl d0 movb a0@(P_PRIORITY),d0 lsrb #2,d0 movl _whichqs,d1 bset d0,d1 movl d1,_whichqs lslb #3,d0 addl #_qs,d0 movl d0,a0@(P_FORW) movl d0,a1 movl a1@(P_BACK),a0@(P_BACK) movl a0,a1@(P_BACK) movl a0@(P_BACK),a1 movl a0,a1@(P_FORW) rts #ifdef DIAGNOSTIC Lset1: movl #Lset2,sp@- jbsr _panic Lset2: .asciz "setrunqueue" .even #endif /* * Remrq(p) * * Call should be made at spl6(). */ ENTRY(remrunqueue) movl sp@(4),a0 movb a0@(P_PRIORITY),d0 #ifdef DIAGNOSTIC lsrb #2,d0 movl _whichqs,d1 btst d0,d1 jeq Lrem2 #endif movl a0@(P_BACK),a1 clrl a0@(P_BACK) movl a0@(P_FORW),a0 movl a0,a1@(P_FORW) movl a1,a0@(P_BACK) cmpal a0,a1 jne Lrem1 #ifndef DIAGNOSTIC lsrb #2,d0 movl _whichqs,d1 #endif bclr d0,d1 movl d1,_whichqs Lrem1: rts #ifdef DIAGNOSTIC Lrem2: movl #Lrem3,sp@- jbsr _panic Lrem3: .asciz "remrunqueue" .even #endif Lsw0: .asciz "switch" .even .globl _curpcb .globl _masterpaddr | XXX compatibility (debuggers) .data _masterpaddr: | XXX compatibility (debuggers) _curpcb: .long 0 mdpflag: .byte 0 | copy of proc md_flags low byte .align 2 .comm nullpcb,SIZEOF_PCB .text /* * At exit of a process, do a switch for the last time. * Switch to a safe stack and PCB, and deallocate the process's resources. */ ENTRY(switch_exit) movl sp@(4),a0 movl #nullpcb,_curpcb | save state into garbage pcb lea tmpstk,sp | goto a tmp stack /* Free old process's resources. */ movl #USPACE,sp@- | size of u-area movl a0@(P_ADDR),sp@- | address of process's u-area movl _kernel_map,sp@- | map it was allocated in jbsr _kmem_free | deallocate it lea sp@(12),sp | pop args jra _cpu_switch /* * When no processes are on the runq, Swtch branches to Idle * to wait for something to come ready. */ .globl Idle Idle: stop #PSL_LOWIPL movw #PSL_HIGHIPL,sr movl _whichqs,d0 jeq Idle jra Lsw1 Lbadsw: movl #Lsw0,sp@- jbsr _panic /*NOTREACHED*/ /* * cpu_switch() * * NOTE: On the mc68851 we attempt to avoid flushing the * entire ATC. The effort involved in selective flushing may not be * worth it, maybe we should just flush the whole thing? * * NOTE 2: With the new VM layout we now no longer know if an inactive * user's PTEs have been changed (formerly denoted by the SPTECHG p_flag * bit). For now, we just always flush the full ATC. */ ENTRY(cpu_switch) movl _curpcb,a0 | current pcb movw sr,a0@(PCB_PS) | save sr before changing ipl #ifdef notyet movl _curproc,sp@- | remember last proc running #endif clrl _curproc /* * Find the highest-priority queue that isn't empty, * then take the first proc from that queue. */ movw #PSL_HIGHIPL,sr | lock out interrupts movl _whichqs,d0 jeq Idle Lsw1: movl d0,d1 negl d0 andl d1,d0 bfffo d0{#0:#32},d1 eorib #31,d1 movl d1,d0 lslb #3,d1 | convert queue number to index addl #_qs,d1 | locate queue (q) movl d1,a1 movl a1@(P_FORW),a0 | p = q->p_forw cmpal d1,a0 | anyone on queue? jeq Lbadsw | no, panic movl a0@(P_FORW),a1@(P_FORW) | q->p_forw = p->p_forw movl a0@(P_FORW),a1 | n = p->p_forw movl d1,a1@(P_BACK) | n->p_back = q cmpal d1,a1 | anyone left on queue? jne Lsw2 | yes, skip movl _whichqs,d1 bclr d0,d1 | no, clear bit movl d1,_whichqs Lsw2: movl a0,_curproc clrl _want_resched #ifdef notyet movl sp@+,a1 cmpl a0,a1 | switching to same proc? jeq Lswdone | yes, skip save and restore #endif /* * Save state of previous process in its pcb. */ movl _curpcb,a1 moveml #0xFCFC,a1@(PCB_REGS) | save non-scratch registers movl usp,a2 | grab USP (a2 has been saved) movl a2,a1@(PCB_USP) | and save it tstl _fputype | If we don't have an FPU, jeq Lswnofpsave | don't try to save it. lea a1@(PCB_FPCTX),a2 | pointer to FP save area fsave a2@ | save FP state tstb a2@ | null state frame? jeq Lswnofpsave | yes, all done fmovem fp0-fp7,a2@(216) | save FP general registers fmovem fpcr/fpsr/fpi,a2@(312) | save FP control registers Lswnofpsave: #ifdef DIAGNOSTIC tstl a0@(P_WCHAN) jne Lbadsw cmpb #SRUN,a0@(P_STAT) jne Lbadsw #endif clrl a0@(P_BACK) | clear back link movb a0@(P_MD_FLAGS+3),mdpflag | low byte of p_md.md_flags movl a0@(P_ADDR),a1 | get p_addr movl a1,_curpcb /* see if pmap_activate needs to be called; should remove this */ movl a0@(P_VMSPACE),a0 | vmspace = p->p_vmspace #ifdef DIAGNOSTIC tstl a0 | map == VM_MAP_NULL? jeq Lbadsw | panic #endif lea a0@(VM_PMAP),a0 | pmap = &vmspace.vm_pmap tstl a0@(PM_STCHG) | pmap->st_changed? jeq Lswnochg | no, skip pea a1@ | push pcb (at p_addr) pea a0@ | push pmap jbsr _pmap_activate | pmap_activate(pmap, pcb) addql #8,sp movl _curpcb,a1 | restore p_addr Lswnochg: lea tmpstk,sp | now goto a tmp stack for NMI #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040? jne Lres1a | no, skip .word 0xf518 | yes, pflusha movl a1@(PCB_USTP),d0 | get USTP moveq #PGSHIFT,d1 lsll d1,d0 | convert to addr .long 0x4e7b0806 | movc d0,urp jra Lcxswdone Lres1a: #endif movl #CACHE_CLR,d0 movc d0,cacr | invalidate cache(s) pflusha | flush entire TLB movl a1@(PCB_USTP),d0 | get USTP moveq #PGSHIFT,d1 lsll d1,d0 | convert to addr lea _protorp,a0 | CRP prototype movl d0,a0@(4) | stash USTP pmove a0@,crp | load new user root pointer Lcxswdone: moveml a1@(PCB_REGS),#0xFCFC | and registers movl a1@(PCB_USP),a0 movl a0,usp | and USP tstl _fputype | If we don't have an FPU, jeq Lnofprest | don't try to restore it. lea a1@(PCB_FPCTX),a0 | pointer to FP save area tstb a0@ | null state frame? jeq Lresfprest | yes, easy #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040? jne Lresnot040 | no, skip clrl sp@- | yes... frestore sp@+ | ...magic! Lresnot040: #endif fmovem a0@(312),fpcr/fpsr/fpi | restore FP control registers fmovem a0@(216),fp0-fp7 | restore FP general registers Lresfprest: frestore a0@ | restore state Lnofprest: movw a1@(PCB_PS),sr | no, restore PS moveq #1,d0 | return 1 (for alternate returns) rts /* * savectx(pcb) * Update pcb, saving current processor state. */ ENTRY(savectx) movl sp@(4),a1 movw sr,a1@(PCB_PS) movl usp,a0 | grab USP movl a0,a1@(PCB_USP) | and save it moveml #0xFCFC,a1@(PCB_REGS) | save non-scratch registers tstl _fputype | If we don't have an FPU, jeq Lsvnofpsave | don't try to save it. lea a1@(PCB_FPCTX),a0 | pointer to FP save area fsave a0@ | save FP state tstb a0@ | null state frame? jeq Lsvnofpsave | yes, all done fmovem fp0-fp7,a0@(216) | save FP general registers fmovem fpcr/fpsr/fpi,a0@(312) | save FP control registers Lsvnofpsave: moveq #0,d0 | return 0 rts #if defined(M68040) ENTRY(suline) movl sp@(4),a0 | address to write movl _curpcb,a1 | current pcb movl #Lslerr,a1@(PCB_ONFAULT) | where to return to on a fault movl sp@(8),a1 | address of line movl a1@+,d0 | get lword movsl d0,a0@+ | put lword nop | sync movl a1@+,d0 | get lword movsl d0,a0@+ | put lword nop | sync movl a1@+,d0 | get lword movsl d0,a0@+ | put lword nop | sync movl a1@+,d0 | get lword movsl d0,a0@+ | put lword nop | sync moveq #0,d0 | indicate no fault jra Lsldone Lslerr: moveq #-1,d0 Lsldone: movl _curpcb,a1 | current pcb clrl a1@(PCB_ONFAULT) | clear fault address rts #endif /* * Invalidate entire TLB. */ ENTRY(TBIA) __TBIA: #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040? jne Lmotommu3 | no, skip .word 0xf518 | yes, pflusha rts Lmotommu3: #endif tstl _mmutype | what mmu? jpl Lmc68851a | 68851 implies no d-cache movl #DC_CLEAR,d0 movc d0,cacr | invalidate on-chip d-cache Lmc68851a: rts /* * Invalidate any TLB entry for given VA (TB Invalidate Single) */ ENTRY(TBIS) #ifdef DEBUG tstl fulltflush | being conservative? jne __TBIA | yes, flush entire TLB #endif #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040? jne Lmotommu4 | no, skip movl sp@(4),a0 movc dfc,d1 moveq #1,d0 | user space movc d0,dfc .word 0xf508 | pflush a0@ moveq #5,d0 | super space movc d0,dfc .word 0xf508 | pflush a0@ movc d1,dfc rts Lmotommu4: #endif tstl _mmutype | is 68851? jpl Lmc68851b | movl sp@(4),a0 | get addr to flush pflush #0,#0,a0@ | flush address from both sides movl #DC_CLEAR,d0 movc d0,cacr | invalidate on-chip data cache rts Lmc68851b: pflushs #0,#0,a0@ | flush address from both sides rts /* * Invalidate supervisor side of TLB */ ENTRY(TBIAS) #ifdef DEBUG tstl fulltflush | being conservative? jne __TBIA | yes, flush everything #endif #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040? jne Lmotommu5 | no, skip .word 0xf518 | yes, pflusha (for now) XXX rts Lmotommu5: #endif pflush #4,#4 | flush supervisor TLB entries movl #DC_CLEAR,d0 movc d0,cacr | invalidate on-chip d-cache rts /* * Invalidate user side of TLB */ ENTRY(TBIAU) #ifdef DEBUG tstl fulltflush | being conservative? jne __TBIA | yes, flush everything #endif #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040? jne Lmotommu6 | no, skip .word 0xf518 | yes, pflusha (for now) XXX rts Lmotommu6: #endif pflush #0,#4 | flush user TLB entries movl #DC_CLEAR,d0 movc d0,cacr | invalidate on-chip d-cache rts /* * Invalidate instruction cache */ ENTRY(ICIA) #if defined(M68040) ENTRY(ICPA) cmpl #MMU_68040,_mmutype | 68040 jne Lmotommu7 | no, skip .word 0xf498 | cinva ic rts Lmotommu7: #endif movl #IC_CLEAR,d0 movc d0,cacr | invalidate i-cache rts /* * Invalidate data cache. * NOTE: we do not flush 68030 on-chip cache as there are no aliasing * problems with DC_WA. The only cases we have to worry about are context * switch and TLB changes, both of which are handled "in-line" in resume * and TBI*. */ ENTRY(DCIA) __DCIA: #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040 jne Lmotommu8 | no, skip .word 0xf478 | cpusha dc rts Lmotommu8: #endif rts ENTRY(DCIS) __DCIS: #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040 jne Lmotommu9 | no, skip .word 0xf478 | cpusha dc rts Lmotommu9: #endif rts | Invalid single cache line ENTRY(DCIAS) __DCIAS: cmpl #MMU_68040,_mmutype | 68040 jeq Ldciasx movl sp@(4),a0 .word 0xf468 | cpushl dc,a0@ Ldciasx: rts ENTRY(DCIU) __DCIU: #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040 jne LmotommuA | no, skip .word 0xf478 | cpusha dc rts LmotommuA: #endif rts #if defined(M68040) ENTRY(ICPL) movl sp@(4),a0 | address .word 0xf488 | cinvl ic,a0@ rts ENTRY(ICPP) movl sp@(4),a0 | address .word 0xf490 | cinvp ic,a0@ rts ENTRY(DCPL) movl sp@(4),a0 | address .word 0xf448 | cinvl dc,a0@ rts ENTRY(DCPP) movl sp@(4),a0 | address .word 0xf450 | cinvp dc,a0@ rts ENTRY(DCPA) .word 0xf458 | cinva dc rts ENTRY(DCFL) movl sp@(4),a0 | address .word 0xf468 | cpushl dc,a0@ rts ENTRY(DCFP) movl sp@(4),a0 | address .word 0xf470 | cpushp dc,a0@ rts #endif ENTRY(PCIA) #if defined(M68040) ENTRY(DCFA) cmpl #MMU_68040,_mmutype | 68040 jne LmotommuB | no, skip .word 0xf478 | cpusha dc rts LmotommuB: #endif movl #DC_CLEAR,d0 movc d0,cacr | invalidate on-chip d-cache rts ENTRY(ecacheon) rts ENTRY(ecacheoff) rts /* * Get callers current SP value. * Note that simply taking the address of a local variable in a C function * doesn't work because callee saved registers may be outside the stack frame * defined by A6 (e.g. GCC generated code). */ .globl _getsp _getsp: movl sp,d0 | get current SP addql #4,d0 | compensate for return address rts .globl _getsfc, _getdfc _getsfc: movc sfc,d0 rts _getdfc: movc dfc,d0 rts /* * Load a new user segment table pointer. */ ENTRY(loadustp) movl sp@(4),d0 | new USTP moveq #PGSHIFT,d1 lsll d1,d0 | convert to addr #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040? jne LmotommuC | no, skip .word 0xf518 | pflusha XXX TDR .long 0x4e7b0806 | movc d0,urp rts LmotommuC: #endif pflusha | XXX TDR lea _protorp,a0 | CRP prototype movl d0,a0@(4) | stash USTP pmove a0@,crp | load root pointer movl #DC_CLEAR,d0 movc d0,cacr | invalidate on-chip d-cache rts | since pmove flushes TLB ENTRY(ploadw) movl sp@(4),a0 | address to load ploadw #1,a0@ | pre-load translation rts /* * Set processor priority level calls. Most are implemented with * inline asm expansions. However, spl0 requires special handling * as we need to check for our emulated software interrupts. */ ENTRY(spl0) moveq #0,d0 movw sr,d0 | get old SR for return movw #PSL_LOWIPL,sr | restore new SR tstb _ssir | software interrupt pending? jeq Lspldone | no, all done subql #4,sp | make room for RTE frame movl sp@(4),sp@(2) | position return address clrw sp@(6) | set frame type 0 movw #PSL_LOWIPL,sp@ | and new SR jra Lgotsir | go handle it Lspldone: rts /* * Save and restore 68881 state. */ ENTRY(m68881_save) movl sp@(4),a0 | save area pointer fsave a0@ | save state tstb a0@ | null state frame? jeq Lm68881sdone | yes, all done fmovem fp0-fp7,a0@(216) | save FP general registers fmovem fpcr/fpsr/fpi,a0@(312) | save FP control registers Lm68881sdone: rts ENTRY(m68881_restore) movl sp@(4),a0 | save area pointer tstb a0@ | null state frame? jeq Lm68881rdone | yes, easy fmovem a0@(312),fpcr/fpsr/fpi | restore FP control registers fmovem a0@(216),fp0-fp7 | restore FP general registers Lm68881rdone: frestore a0@ | restore state rts /* * Handle the nitty-gritty of rebooting the machine. * Basically we just turn off the MMU and jump to the appropriate ROM routine. * XXX add support for rebooting -- that means looking at boothowto and doing * the right thing */ .globl _doboot _doboot: lea tmpstk,sp | physical SP in case of NMI #if defined(M68040) cmpl #MMU_68040,_mmutype | 68040? jne Lbootnot040 | no, skip movl #0,d0 movc d0,cacr | caches off .long 0x4e7b0003 | movc d0,tc (turn off MMU) bra 1f Lbootnot040: #endif movl #CACHE_OFF,d0 movc d0,cacr | disable on-chip cache(s) movl #0,a7@ | value for pmove to TC (turn off MMU) pmove a7@,tc | disable MMU 1: movl #0,d0 movc d0,vbr | ROM VBR /* * We're going down. Make various sick attempts to reset the board. */ RELOC(_cputyp, a0) movl a0@,d0 cmpw #CPU_147,d0 bne not147 movl #0xfffe2000,a0 | MVME147: "struct vme1reg *" movw a0@,d0 movl d0,d1 andw #0x0001,d1 | is VME1_SCON_SWITCH set? beq 1f | not SCON. may not use SRESET. orw #0x0002,d0 | ok, assert VME1_SCON_SRESET movw d0,a0@ 1: movl #0xff800000,a0 | if we get here, SRESET did not work. movl a0@(4),a0 | try jumping directly to the ROM. jsr a0@ | still alive! just return to the prom.. bra 3f not147: movl #0xfff40000,a0 | MVME16x: "struct vme2reg *" movl a0@(0x60),d0 movl d0,d1 andl #0x40000000,d1 | is VME2_TCTL_SCON set? beq 1f | not SCON. may not use SRESET. orw #0x00800000,d0 | ok, assert VME2_TCTL_SRST movl d0,a0@(0x60) 1: | lets try the local bus reset movl #0xfff40000,a0 | MVME16x: "struct vme2reg *" movl a0@(0x104),d0 orw #0x00000080,d0 movl d0,a0@(0x104) | lets try jumping off to rom. movl #0xff800000,a0 | if we get here, SRESET did not work. movl a0@(4),a0 | try jumping directly to the ROM. jsr a0@ | still alive! just return to the prom.. 3: trap #15 .short MVMEPROM_EXIT | return to m68kbug /*NOTREACHED*/ .data .globl _mmutype,_protorp,_cputype,_fputype _mmutype: .long MMU_68030 | default to MMU_68030 _cputype: .long CPU_68030 | default to CPU_68030 _fputype: .long FPU_68881 | default to 68881 FPU _protorp: .long 0,0 | prototype root pointer .globl _cold _cold: .long 1 | cold start flag .globl _want_resched _want_resched: .long 0 .globl _intiobase, _intiolimit, _extiobase .globl _proc0paddr _proc0paddr: .long 0 | KVA of proc0 u-area _intiobase: .long 0 | KVA of base of internal IO space _intiolimit: .long 0 | KVA of end of internal IO space _extiobase: .long 0 | KVA of base of external IO space #ifdef DEBUG .globl fulltflush, fullcflush fulltflush: .long 0 fullcflush: .long 0 #endif /* interrupt counters */ .globl _intrcnt,_eintrcnt,_intrnames,_eintrnames _intrnames: .asciz "spur" .asciz "lev1" .asciz "lev2" .asciz "lev3" .asciz "lev4" .asciz "clock" .asciz "lev6" .asciz "nmi" .asciz "statclock" _eintrnames: .even _intrcnt: .long 0,0,0,0,0,0,0,0,0,0 _eintrcnt: #include