/* $OpenBSD: machdep.c,v 1.100 2006/07/03 20:48:27 miod Exp $ */ /* * Copyright (c) 1995 Theo de Raadt * Copyright (c) 1999 Steve Murphree, Jr. (68060 support) * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Copyright (c) 1988 University of Utah. * Copyright (c) 1982, 1986, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah $Hdr: machdep.c 1.74 92/12/20$ * * @(#)machdep.c 8.10 (Berkeley) 4/20/94 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef SYSVMSG #include #endif #include #include #include #include #include #include #include #include #ifdef MVME147 #include #endif #include #include #ifdef DDB #include #include #include #include #endif #include /* the following is used externally (sysctl_hw) */ char machine[] = MACHINE; /* cpu "architecture" */ struct vm_map *exec_map = NULL; struct vm_map *phys_map = NULL; extern vaddr_t avail_end; /* * Declare these as initialized data so we can patch them. */ #ifdef NBUF int nbuf = NBUF; #else int nbuf = 0; #endif #ifndef BUFCACHEPERCENT #define BUFCACHEPERCENT 5 #endif #ifdef BUFPAGES int bufpages = BUFPAGES; #else int bufpages = 0; #endif int bufcachepercent = BUFCACHEPERCENT; int physmem; /* size of physical memory, in pages */ /* * safepri is a safe priority for sleep to set for a spin-wait * during autoconfiguration or after a panic. */ int safepri = PSL_LOWIPL; #ifdef COMPAT_SUNOS extern struct emul emul_sunos; #endif void dumpsys(void); void initvectors(void); void mvme68k_init(void); void identifycpu(void); int cpu_sysctl(int *, u_int, void *, size_t *, void *, size_t, struct proc *); void dumpconf(void); void straytrap(int, u_short); void netintr(void *); void myetheraddr(u_char *); int fpu_gettype(void); int memsize162(void); int memsize1x7(void); /* in locore */ int memsize(void); caddr_t allocsys(caddr_t); void mvme68k_init() { extern vaddr_t avail_start; /* * Tell the VM system about available physical memory. The * mvme68k only has one segment. */ uvmexp.pagesize = NBPG; uvm_setpagesize(); uvm_page_physload(atop(avail_start), atop(avail_end), atop(avail_start), atop(avail_end), VM_FREELIST_DEFAULT); /* * Put machine specific exception vectors in place. */ initvectors(); } /* * Console initialization: called early on from main, * before vm init or startup, but already running virtual. * Do enough configuration to choose and initialize a console. */ void consinit() { /* * Initialize the console before we print anything out. */ cninit(); #ifdef DDB db_machine_init(); ddb_init(); if (boothowto & RB_KDB) Debugger(); #endif } /* * cpu_startup: allocate memory for variable-sized tables, * initialize cpu, and do autoconfiguration. */ void cpu_startup() { unsigned i; caddr_t v; int base, residual; vaddr_t minaddr, maxaddr; vsize_t size; #ifdef DEBUG extern int pmapdebug; int opmapdebug = pmapdebug; pmapdebug = 0; #endif /* * Initialize error message buffer (at end of core). * avail_end was pre-decremented in pmap_bootstrap to compensate. */ for (i = 0; i < btoc(MSGBUFSIZE); i++) pmap_kenter_pa((vaddr_t)msgbufp + i * PAGE_SIZE, avail_end + i * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE); pmap_update(pmap_kernel()); initmsgbuf((caddr_t)msgbufp, round_page(MSGBUFSIZE)); /* * Good {morning,afternoon,evening,night}. */ printf("%s", version); identifycpu(); printf("real mem = %d (%dK)\n", ctob(physmem), ctob(physmem) / 1024); /* * Find out how much space we need, allocate it, * and then give everything true virtual addresses. */ size = (vsize_t)allocsys((caddr_t)0); if ((v = (caddr_t) uvm_km_zalloc(kernel_map, round_page(size))) == 0) panic("startup: no room for tables"); if (allocsys(v) - v != size) panic("startup: table size inconsistency"); /* * Now allocate buffers proper. They are different than the above * in that they usually occupy more virtual memory than physical. */ size = MAXBSIZE * nbuf; if (uvm_map(kernel_map, (vaddr_t *) &buffers, round_page(size), NULL, UVM_UNKNOWN_OFFSET, 0, UVM_MAPFLAG(UVM_PROT_NONE, UVM_PROT_NONE, UVM_INH_NONE, UVM_ADV_NORMAL, 0))) panic("cpu_startup: cannot allocate VM for buffers"); minaddr = (vaddr_t)buffers; if ((bufpages / nbuf) >= btoc(MAXBSIZE)) { /* don't want to alloc more physical mem than needed */ bufpages = btoc(MAXBSIZE) * nbuf; } base = bufpages / nbuf; residual = bufpages % nbuf; for (i = 0; i < nbuf; i++) { vsize_t curbufsize; vaddr_t curbuf; struct vm_page *pg; /* * Each buffer has MAXBSIZE bytes of VM space allocated. Of * that MAXBSIZE space, we allocate and map (base+1) pages * for the first "residual" buffers, and then we allocate * "base" pages for the rest. */ curbuf = (vaddr_t)buffers + (i * MAXBSIZE); curbufsize = PAGE_SIZE * ((i < residual) ? (base+1) : base); while (curbufsize) { pg = uvm_pagealloc(NULL, 0, NULL, 0); if (pg == NULL) panic("cpu_startup: not enough memory for " "buffer cache"); pmap_kenter_pa(curbuf, VM_PAGE_TO_PHYS(pg), VM_PROT_READ|VM_PROT_WRITE); curbuf += PAGE_SIZE; curbufsize -= PAGE_SIZE; } } pmap_update(pmap_kernel()); /* * Allocate a submap for exec arguments. This map effectively * limits the number of processes exec'ing at any time. */ exec_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr, 16*NCARGS, VM_MAP_PAGEABLE, FALSE, NULL); /* * Allocate a submap for physio. */ phys_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr, VM_PHYS_SIZE, 0, FALSE, NULL); #ifdef DEBUG pmapdebug = opmapdebug; #endif /* * Set up buffers, so they can be used to read disk labels. */ bufinit(); printf("avail mem = %d (%dK)\n", ptoa(uvmexp.free), ptoa(uvmexp.free) / 1024); printf("using %d buffers containing %d bytes of memory\n", nbuf, bufpages * PAGE_SIZE); /* * Configure the system. */ if (boothowto & RB_CONFIG) { #ifdef BOOT_CONFIG user_config(); #else printf("kernel does not support -c; continuing..\n"); #endif } } /* * Allocate space for system data structures. We are given * a starting virtual address and we return a final virtual * address; along the way we set each data structure pointer. * * You call allocsys() with 0 to find out how much space we want, * allocate that much and fill it with zeroes, and then call * allocsys() again with the correct base virtual address. */ caddr_t allocsys(caddr_t v) { #define valloc(name, type, num) \ (name) = (type *)v; v = (caddr_t)((name) + (num)) #ifdef SYSVMSG valloc(msgpool, char, msginfo.msgmax); valloc(msgmaps, struct msgmap, msginfo.msgseg); valloc(msghdrs, struct msg, msginfo.msgtql); valloc(msqids, struct msqid_ds, msginfo.msgmni); #endif /* * Determine how many buffers to allocate (enough to * hold 5% of total physical memory, but at least 16). * Allocate 1/2 as many swap buffer headers as file i/o buffers. */ if (bufpages == 0) bufpages = physmem * bufcachepercent / 100; if (nbuf == 0) { nbuf = bufpages; if (nbuf < 16) nbuf = 16; } /* Restrict to at most 70% filled kvm */ if (nbuf * MAXBSIZE > (VM_MAX_KERNEL_ADDRESS - VM_MIN_KERNEL_ADDRESS) * 7 / 10) nbuf = (VM_MAX_KERNEL_ADDRESS - VM_MIN_KERNEL_ADDRESS) / MAXBSIZE * 7 / 10; /* More buffer pages than fits into the buffers is senseless. */ if (bufpages > nbuf * MAXBSIZE / PAGE_SIZE) bufpages = nbuf * MAXBSIZE / PAGE_SIZE; valloc(buf, struct buf, nbuf); return (v); } /* * Info for CTL_HW */ char cpu_model[120]; int cputyp; int cpuspeed; struct mvmeprom_brdid brdid; void identifycpu() { char mc; char speed[6]; char suffix[30]; int len; bzero(suffix, sizeof suffix); switch (mmutype) { case MMU_68060: mc = '6'; break; case MMU_68040: mc = '4'; break; case MMU_68030: mc = '3'; break; default: mc = '2'; } switch (cputyp) { #ifdef MVME147 case CPU_147: snprintf(suffix, sizeof suffix, "MVME%x", brdid.model); cpuspeed = pccspeed((struct pccreg *)IIOV(0xfffe1000)); snprintf(speed, sizeof speed, "%02d", cpuspeed); break; #endif #if defined(MVME162) || defined(MVME167) || defined(MVME172) || defined(MVME177) case CPU_162: case CPU_167: case CPU_172: case CPU_177: bzero(speed, sizeof speed); speed[0] = brdid.speed[0]; speed[1] = brdid.speed[1]; if (brdid.speed[2] != '0' && brdid.speed[3] != '0') { speed[2] = '.'; speed[3] = brdid.speed[2]; speed[4] = brdid.speed[3]; } cpuspeed = (speed[0] - '0') * 10 + (speed[1] - '0'); bcopy(brdid.longname, suffix, sizeof(brdid.longname)); for (len = strlen(suffix)-1; len; len--) { if (suffix[len] == ' ') suffix[len] = '\0'; else break; } break; #endif } snprintf(cpu_model, sizeof cpu_model, "Motorola %s: %sMHz MC680%c0 CPU", suffix, speed, mc); switch (mmutype) { #if defined(M68040) case MMU_68040: /* FALLTHROUGH */ #endif #if defined(M68060) case MMU_68060: /* FALLTHROUGH */ #endif case MMU_68030: strlcat(cpu_model, "+MMU", sizeof cpu_model); break; case MMU_68851: strlcat(cpu_model, ", MC68851 MMU", sizeof cpu_model); break; default: printf("%s\n", cpu_model); panic("unknown MMU type %d", mmutype); } switch (mmutype) { #if defined(M68060) case MMU_68060: strlcat(cpu_model,"+FPU, 8k on-chip physical I/D caches", sizeof cpu_model); break; #endif #if defined(M68040) case MMU_68040: strlcat(cpu_model, "+FPU, 4k on-chip physical I/D caches", sizeof cpu_model); break; #endif #if defined(M68030) || defined(M68020) default: fputype = fpu_gettype(); switch (fputype) { case FPU_NONE: break; case FPU_68881: case FPU_68882: len = strlen (cpu_model); snprintf(cpu_model + len, sizeof cpu_model - len, ", MC6888%d FPU", fputype); break; default: strlcat(cpu_model, ", unknown FPU", sizeof cpu_model); break; } break; #endif } printf("%s\n", cpu_model); } /* * machine dependent system variables. */ int cpu_sysctl(name, namelen, oldp, oldlenp, newp, newlen, p) int *name; u_int namelen; void *oldp; size_t *oldlenp; void *newp; size_t newlen; struct proc *p; { dev_t consdev; /* all sysctl names at this level are terminal */ if (namelen != 1) return (ENOTDIR); /* overloaded */ switch (name[0]) { case CPU_CONSDEV: if (cn_tab != NULL) consdev = cn_tab->cn_dev; else consdev = NODEV; return (sysctl_rdstruct(oldp, oldlenp, newp, &consdev, sizeof consdev)); default: return (EOPNOTSUPP); } /* NOTREACHED */ } int waittime = -1; __dead void boot(howto) int howto; { /* If system is cold, just halt. */ if (cold) { /* (Unless the user explicitly asked for reboot.) */ if ((howto & RB_USERREQ) == 0) howto |= RB_HALT; goto haltsys; } /* take a snap shot before clobbering any registers */ if (curproc && curproc->p_addr) savectx(&curproc->p_addr->u_pcb); boothowto = howto; if ((howto & RB_NOSYNC) == 0 && waittime < 0) { extern struct proc proc0; /* do that another panic fly away */ if (curproc == NULL) curproc = &proc0; waittime = 0; vfs_shutdown(); /* * If we've been adjusting the clock, the todr * will be out of synch; adjust it now unless * the system was sitting in ddb. */ if ((howto & RB_TIMEBAD) == 0) { resettodr(); } else { printf("WARNING: not updating battery clock\n"); } } /* Disable interrupts. */ splhigh(); /* If rebooting and a dump is requested, do it. */ if (howto & RB_DUMP) dumpsys(); haltsys: /* Run any shutdown hooks. */ doshutdownhooks(); if (howto & RB_HALT) { printf("System halted. Press any key to reboot...\n\n"); cngetc(); } doboot(); for (;;); /*NOTREACHED*/ } /* * These variables are needed by /sbin/savecore */ u_long dumpmag = 0x8fca0101; /* magic number */ int dumpsize = 0; /* pages */ long dumplo = 0; /* blocks */ cpu_kcore_hdr_t cpu_kcore_hdr; /* * This is called by configure to set dumplo and dumpsize. * Dumps always skip the first PAGE_SIZE of disk space * in case there might be a disk label stored there. * If there is extra space, put dump at the end to * reduce the chance that swapping trashes it. */ void dumpconf() { int nblks; /* size of dump area */ int maj; if (dumpdev == NODEV) return; maj = major(dumpdev); if (maj < 0 || maj >= nblkdev) panic("dumpconf: bad dumpdev=0x%x", dumpdev); if (bdevsw[maj].d_psize == NULL) return; nblks = (*bdevsw[maj].d_psize)(dumpdev); if (nblks <= ctod(1)) return; dumpsize = physmem; /* mvme68k only uses a single segment. */ cpu_kcore_hdr.ram_segs[0].start = 0; cpu_kcore_hdr.ram_segs[0].size = ctob(physmem); cpu_kcore_hdr.mmutype = mmutype; cpu_kcore_hdr.kernel_pa = 0; cpu_kcore_hdr.sysseg_pa = pmap_kernel()->pm_stpa; /* Always skip the first block, in case there is a label there. */ if (dumplo < ctod(1)) dumplo = ctod(1); /* Put dump at end of partition, and make it fit. */ if (dumpsize + 1 > dtoc(nblks - dumplo)) dumpsize = dtoc(nblks - dumplo) - 1; if (dumplo < nblks - ctod(dumpsize) - 1) dumplo = nblks - ctod(dumpsize) - 1; } /* * Doadump comes here after turning off memory management and * getting on the dump stack, either when called above, or by * the auto-restart code. */ void dumpsys() { int maj; int psize; daddr_t blkno; /* current block to write */ /* dump routine */ int (*dump)(dev_t, daddr_t, caddr_t, size_t); int pg; /* page being dumped */ paddr_t maddr; /* PA being dumped */ int error; /* error code from (*dump)() */ kcore_seg_t *kseg_p; cpu_kcore_hdr_t *chdr_p; char dump_hdr[dbtob(1)]; /* XXX assume hdr fits in 1 block */ extern int msgbufmapped; msgbufmapped = 0; /* Make sure dump device is valid. */ if (dumpdev == NODEV) return; if (dumpsize == 0) { dumpconf(); if (dumpsize == 0) return; } maj = major(dumpdev); if (dumplo < 0) { printf("\ndump to dev %u,%u not possible\n", maj, minor(dumpdev)); return; } dump = bdevsw[maj].d_dump; blkno = dumplo; printf("\ndumping to dev %u,%u offset %ld\n", maj, minor(dumpdev), dumplo); kseg_p = (kcore_seg_t *)dump_hdr; chdr_p = (cpu_kcore_hdr_t *)&dump_hdr[ALIGN(sizeof(*kseg_p))]; bzero(dump_hdr, sizeof(dump_hdr)); /* * Generate a segment header */ CORE_SETMAGIC(*kseg_p, KCORE_MAGIC, MID_MACHINE, CORE_CPU); kseg_p->c_size = dbtob(1) - ALIGN(sizeof(*kseg_p)); /* * Add the md header */ *chdr_p = cpu_kcore_hdr; printf("dump "); psize = (*bdevsw[maj].d_psize)(dumpdev); if (psize == -1) { printf("area unavailable\n"); return; } /* Dump the header. */ error = (*dump) (dumpdev, blkno++, (caddr_t)dump_hdr, dbtob(1)); if (error != 0) goto abort; maddr = (paddr_t)0; for (pg = 0; pg < dumpsize; pg++) { #define NPGMB (1024 * 1024 / PAGE_SIZE) /* print out how many MBs we have dumped */ if (pg != 0 && (pg % NPGMB) == 0) printf("%d ", pg / NPGMB); #undef NPGMB pmap_kenter_pa((vaddr_t)vmmap, maddr, VM_PROT_READ); pmap_update(pmap_kernel()); error = (*dump)(dumpdev, blkno, vmmap, PAGE_SIZE); pmap_kremove((vaddr_t)vmmap, PAGE_SIZE); pmap_update(pmap_kernel()); if (error == 0) { maddr += PAGE_SIZE; blkno += btodb(PAGE_SIZE); } else break; } abort: switch (error) { case 0: printf("succeeded\n"); break; case ENXIO: printf("device bad\n"); break; case EFAULT: printf("device not ready\n"); break; case EINVAL: printf("area improper\n"); break; case EIO: printf("i/o error\n"); break; case EINTR: printf("aborted from console\n"); break; default: printf("error %d\n", error); break; } } #if defined(M68060) int m68060_pcr_init = 0x20 | PCR_SUPERSCALAR; /* make this patchable */ #endif void initvectors() { typedef void trapfun(void); extern trapfun *vectab[256]; #if defined(M68060) #if defined(M060SP) extern trapfun intemu60, fpiemu60, fpdemu60, fpeaemu60; extern u_int8_t FP_CALL_TOP[]; #else extern trapfun illinst; #endif extern trapfun fpfault; #endif #if defined(M68040) && defined(FPSP) extern u_long fpvect_tab, fpvect_end, fpsp_tab; #endif switch (cputype) { #ifdef M68060 case CPU_68060: asm volatile ("movl %0,d0; .word 0x4e7b,0x0808" : : "d"(m68060_pcr_init):"d0" ); #if defined(M060SP) /* integer support */ vectab[61] = intemu60/*(trapfun *)&I_CALL_TOP[128 + 0x00]*/; /* floating point support */ /* * XXX maybe we really should run-time check for the * stack frame format here: */ vectab[11] = fpiemu60/*(trapfun *)&FP_CALL_TOP[128 + 0x30]*/; vectab[55] = fpdemu60/*(trapfun *)&FP_CALL_TOP[128 + 0x38]*/; vectab[60] = fpeaemu60/*(trapfun *)&FP_CALL_TOP[128 + 0x40]*/; vectab[54] = (trapfun *)&FP_CALL_TOP[128 + 0x00]; vectab[52] = (trapfun *)&FP_CALL_TOP[128 + 0x08]; vectab[53] = (trapfun *)&FP_CALL_TOP[128 + 0x10]; vectab[51] = (trapfun *)&FP_CALL_TOP[128 + 0x18]; vectab[50] = (trapfun *)&FP_CALL_TOP[128 + 0x20]; vectab[49] = (trapfun *)&FP_CALL_TOP[128 + 0x28]; #else vectab[61] = illinst; #endif vectab[48] = fpfault; break; #endif #if defined(M68040) && defined(FPSP) case CPU_68040: bcopy(&fpsp_tab, &fpvect_tab, (&fpvect_end - &fpvect_tab) * sizeof (fpvect_tab)); break; #endif default: break; } } void straytrap(pc, evec) int pc; u_short evec; { printf("unexpected trap (vector 0x%x) from %x\n", (evec & 0xFFF) >> 2, pc); } int *nofault; int badpaddr(addr, size) paddr_t addr; int size; { int off = (int)addr & PGOFSET; vaddr_t v; paddr_t p = trunc_page(addr); int x; v = mapiodev(p, NBPG); if (v == 0) return (1); x = badvaddr(v + off, size); unmapiodev(v, NBPG); return (x); } int badvaddr(addr, size) vaddr_t addr; int size; { int i; label_t faultbuf; nofault = (int *) &faultbuf; if (setjmp((label_t *)nofault)) { nofault = (int *)0; return (1); } switch (size) { case 1: i = *(volatile char *)addr; break; case 2: i = *(volatile short *)addr; break; case 4: i = *(volatile long *)addr; break; } nofault = (int *)0; return (0); } int netisr; void netintr(arg) void *arg; { #define DONETISR(bit, fn) \ do { \ if (netisr & (1 << (bit))) { \ netisr &= ~(1 << (bit)); \ (fn)(); \ } \ } while (0) #include #undef DONETISR } /* * Level 7 interrupts are normally caused by the ABORT switch, * drop into ddb. */ void nmihand(frame) void *frame; { #ifdef DDB printf("NMI ... going to debugger\n"); Debugger(); #else /* panic?? */ printf("unexpected level 7 interrupt ignored\n"); #endif } /* * cpu_exec_aout_makecmds(): * cpu-dependent a.out format hook for execve(). * * Determine of the given exec package refers to something which we * understand and, if so, set up the vmcmds for it. */ int cpu_exec_aout_makecmds(p, epp) struct proc *p; struct exec_package *epp; { int error = ENOEXEC; #ifdef COMPAT_SUNOS { extern int sunos_exec_aout_makecmds(struct proc *, struct exec_package *); if ((error = sunos_exec_aout_makecmds(p, epp)) == 0) return (0); } #endif return (error); } u_char myea[6] = { 0x08, 0x00, 0x3e, 0xff, 0xff, 0xff}; void myetheraddr(ether) u_char *ether; { bcopy(myea, ether, sizeof myea); } #if defined(M68030) || defined(M68020) int fpu_gettype() { /* * A 68881 idle frame is 28 bytes and a 68882's is 60 bytes. * We, of course, need to have enough room for either. */ int fpframe[60 / sizeof(int)]; label_t faultbuf; u_char b; nofault = (int *) &faultbuf; if (setjmp((label_t *)nofault)) { nofault = (int *)0; return (0); /* no FPU */ } /* * Synchronize FPU or cause a fault. * This should leave the 881/882 in the IDLE state, * state, so we can determine which we have by * examining the size of the FP state frame */ asm("fnop"); nofault = (int *)0; /* * Presumably, this will not cause a fault--the fnop should * have if this will. We save the state in order to get the * size of the frame. */ asm("movl %0, a0; fsave a0@" : : "a" (fpframe) : "a0" ); b = *((u_char *) fpframe + 1); /* * Now, restore a NULL state to reset the FPU. */ fpframe[0] = fpframe[1] = 0; m68881_restore((struct fpframe *)fpframe); if (b == 0x18) return (FPU_68881); /* The size of a 68881 IDLE frame is 0x18 */ if (b == 0x38) return (FPU_68882); /* 68882 frame is 0x38 bytes long */ return (FPU_UNKNOWN); /* unknown FPU type */ } #endif #if defined(MVME162) || defined(MVME172) #include /* * XXX * used by locore.s to figure out how much memory is on the machine. * At this stage we only know that our machine is a 162. It is very * unfortunate that the MCchip's address must be encoded here. */ int memsize162() { struct mcreg *mc = (struct mcreg *)0xfff42000; switch (mc->mc_memoptions & MC_MEMOPTIONS_DRAMMASK) { case MC_MEMOPTIONS_DRAM1M: return (1*1024*1024); case MC_MEMOPTIONS_DRAM2M: return (2*1024*1024); case MC_MEMOPTIONS_DRAM4M: return (4*1024*1024); case MC_MEMOPTIONS_DRAM4M2: return (4*1024*1024); case MC_MEMOPTIONS_DRAM8M: return (8*1024*1024); case MC_MEMOPTIONS_DRAM16M: return (16*1024*1024); default: /* * XXX if the machine has no MC-controlled memory, * perhaps it has a MCECC or MEMC040 controller? */ return (memsize1x7()); } } #endif