/*	$OpenBSD: db_sstep.c,v 1.12 2003/10/11 22:08:57 miod Exp $	*/
/*
 * Mach Operating System
 * Copyright (c) 1993-1991 Carnegie Mellon University
 * Copyright (c) 1991 OMRON Corporation
 * All Rights Reserved.
 *
 * Permission to use, copy, modify and distribute this software and its
 * documentation is hereby granted, provided that both the copyright
 * notice and this permission notice appear in all copies of the
 * software, derivative works or modified versions, and any portions
 * thereof, and that both notices appear in supporting documentation.
 *
 * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS"
 * CONDITION.  CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND
 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
 *
 * Carnegie Mellon requests users of this software to return to
 *
 *  Software Distribution Coordinator  or  Software.Distribution@CS.CMU.EDU
 *  School of Computer Science
 *  Carnegie Mellon University
 *  Pittsburgh PA 15213-3890
 *
 * any improvements or extensions that they make and grant Carnegie the
 * rights to redistribute these changes.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <machine/db_machdep.h>
#include <ddb/db_access.h>	/* db_get_value() */
#include <ddb/db_break.h>	/* db_breakpoint_t */

/*
 * Support routines for software single step.
 *
 * Author: Daniel Stodolsky (danner@cs.cmu.edu)
 *
 */

boolean_t inst_delayed(unsigned int ins);

#ifdef INTERNAL_SSTEP
db_breakpoint_t db_not_taken_bkpt = 0;
db_breakpoint_t db_taken_bkpt = 0;
#endif

/*
 * Returns TRUE is the instruction a branch or jump instruction
 * (br, bb0, bb1, bcnd, jmp) but not a function call (bsr or jsr)
 */
boolean_t
inst_branch(ins)
	unsigned int ins;
{
	/* check high five bits */
	switch (ins >> (32 - 5)) {
	case 0x18: /* br */
	case 0x1a: /* bb0 */
	case 0x1b: /* bb1 */
	case 0x1d: /* bcnd */
		return TRUE;
		break;
	case 0x1e: /* could be jmp */
		if ((ins & 0xfffffbe0U) == 0xf400c000U)
			return TRUE;
	}

	return FALSE;
}

/*
 * inst_load(ins)
 * Returns the number of words the instruction loads. byte,
 * half and word count as 1; double word as 2
 */
unsigned
inst_load(ins)
	unsigned int ins;
{
	/* look at the top six bits, for starters */
	switch (ins >> (32 - 6)) {
	case 0x0: /* xmem byte imm */
	case 0x1: /* xmem word imm */

	case 0x2: /* unsigned half-word load imm */
	case 0x3: /* unsigned byte load imm */
	case 0x5: /* signed word load imm */
	case 0x6: /* signed half-word load imm */
	case 0x7: /* signed byte load imm */
		return 1;

	case 0x4: /* signed double word load imm */
		return 2;

	case 0x3d: /* load/store/xmem scaled/unscaled instruction */
		if ((ins & 0xf400c0e0U) == 0xf4000000U)	/* is load/xmem */
			switch ((ins & 0x0000fce0) >> 5) { /* look at bits 15-5, but mask bits 8-9 */
			case 0x0: /* xmem byte */
			case 0x1: /* xmem word */
			case 0x2: /* unsigned half word */
			case 0x3: /* unsigned byte load */
			case 0x5: /* signed word load */
			case 0x6: /* signed half-word load */
			case 0x7: /* signed byte load */
				return 1;

			case 0x4: /* signed double word load */
				return 2;
			} /* end switch load/xmem  */
		break;
	} /* end switch 32-6 */

	return 0;
}

/*
 * inst_store
 * Like inst_load, except for store instructions.
 */
unsigned
inst_store(ins)
	unsigned int ins;
{
	/* decode top 6 bits again */
	switch (ins >> (32 - 6)) {
	case 0x0: /* xmem byte imm */
	case 0x1: /* xmem word imm */
	case 0x9: /* store word imm */
	case 0xa: /* store half-word imm */
	case 0xb: /* store byte imm */
		return 1;

	case 0x8: /* store double word */
		return 2;
	case 0x3d: /* load/store/xmem scaled/unscaled instruction */
		/* check bits 15,14,12,7,6,5 are all 0 */
		if ((ins & 0x0000d0e0U) == 0)
			switch ((ins & 0x00003c00U) >> 10) { /* decode bits 10-13 */
			case 0x0: /* xmem byte imm */
			case 0x1: /* xmem word imm */
			case 0x9: /* store word */
			case 0xa: /* store half-word */
			case 0xb: /* store byte */
				return 1;

			case 0x8: /* store double word */
				return 2;
			} /* end switch store/xmem */
		break;
	} /* end switch 32-6 */

	return 0;
}

/*
 * inst_delayed
 * Returns TRUE if this instruction is followed by a delay slot.
 * Could be br.n, bsr.n bb0.n, bb1.n, bcnd.n or jmp.n or jsr.n
 */
boolean_t
inst_delayed(ins)
	unsigned int ins;
{
	/* check the br, bsr, bb0, bb1, bcnd cases */
	switch ((ins & 0xfc000000U) >> (32 - 6)) {
	case 0x31: /* br */
	case 0x33: /* bsr */
	case 0x35: /* bb0 */
	case 0x37: /* bb1 */
	case 0x3b: /* bcnd */
		return TRUE;
	}

	/* check the jmp, jsr cases */
	/* mask out bits 0-4, bit 11 */
	return ((ins & 0xfffff7e0U) == 0xf400c400U) ? TRUE : FALSE;
}

/*
 * next_instr_address(pc,delay_slot,task) has the following semantics.
 * Let inst be the instruction at pc.
 * If delay_slot = 1, next_instr_address should return
 * the address of the instruction in the delay slot; if this instruction
 * does not have a delay slot, it should return pc.
 * If delay_slot = 0, next_instr_address should return the
 * address of next sequential instruction, or pc if the instruction is
 * followed by a delay slot.
 *
 * 91-11-28 jfriedl: I think the above is wrong. I think it should be:
 *	if delay_slot true, return address of the delay slot if there is one,
 *			    return pc otherwise.
 *	if delay_slot false, return (pc + 4) regardless.
 *
 */
db_addr_t
next_instr_address(pc, delay_slot)
	db_addr_t pc;
	unsigned delay_slot;
{
	if (delay_slot == 0)
		return pc + 4;
	else {
		if (inst_delayed(db_get_value(pc, sizeof(int), FALSE)))
			return pc + 4;
		else
			return pc;
	}
}


/*
 * branch_taken(instruction, program counter, func, func_data)
 *
 * instruction will be a control flow instruction location at address pc.
 * Branch taken is supposed to return the address to which the instruction
 * would jump if the branch is taken. Func can be used to get the current
 * register values when invoked with a register number and func_data as
 * arguments.
 *
 * If the instruction is not a control flow instruction, panic.
 */
db_addr_t
branch_taken(inst, pc, func, func_data)
	u_int inst;
	db_addr_t pc;
	db_expr_t (*func)(db_regs_t *, int);
	db_regs_t *func_data;
{
	/* check if br/bsr */
	if ((inst & 0xf0000000U) == 0xc0000000U) {
		/* signed 26 bit pc relative displacement, shift left two bits */
		inst = (inst & 0x03ffffffU) << 2;
		/* check if sign extension is needed */
		if (inst & 0x08000000U)
			inst |= 0xf0000000U;
		return pc + inst;
	}

	/* check if bb0/bb1/bcnd case */
	switch ((inst & 0xf8000000U)) {
	case 0xd0000000U: /* bb0 */
	case 0xd8000000U: /* bb1 */
	case 0xe8000000U: /* bcnd */
		/* signed 16 bit pc relative displacement, shift left two bits */
		inst = (inst & 0x0000ffffU) << 2;
		/* check if sign extension is needed */
		if (inst & 0x00020000U)
			inst |= 0xfffc0000U;
		return pc + inst;
	}

	/* check jmp/jsr case */
	/* check bits 5-31, skipping 10 & 11 */
	if ((inst & 0xfffff3e0U) == 0xf400c000U) {
		return (*func)(func_data, (inst & 0x0000001fU));  /* the register value */
	}


	panic("branch_taken");
	return 0; /* keeps compiler happy */
}

/*
 * getreg_val - handed a register number and an exception frame.
 *              Returns the value of the register in the specified
 *              frame. Only makes sense for general registers.
 */

register_t
getreg_val(frame, regno)
	db_regs_t *frame;
	int regno;
{
	if (regno == 0)
		return 0;
	else if (regno < 31)
		return frame->r[regno];
	else {
		panic("bad register number (%d) to getreg_val.", regno);
		return 0;/*to make compiler happy */
	}
}

#ifdef INTERNAL_SSTEP
void
db_set_single_step(regs)
	db_regs_t *regs;
{
	if (cputyp == CPU_88110) {
		((regs)->epsr |= (PSR_TRACE | PSR_SER));
	} else {
		db_addr_t pc = PC_REGS(regs);
#ifndef SOFTWARE_SSTEP_EMUL
		db_addr_t brpc;
		u_int inst;

		/*
		 * User was stopped at pc, e.g. the instruction
		 * at pc was not executed.
		 */
		inst = db_get_value(pc, sizeof(int), FALSE);
		if (inst_branch(inst) || inst_call(inst) || inst_return(inst)) {
			brpc = branch_taken(inst, pc, getreg_val, regs);
			if (brpc != pc) {	/* self-branches are hopeless */
				db_taken_bkpt = db_set_temp_breakpoint(brpc);
			}
#if 0
			/* XXX this seems like a true bug, no?  */
			pc = next_instr_address(pc, 1);
#endif
		}
#endif /*SOFTWARE_SSTEP_EMUL*/
		pc = next_instr_address(pc, 0);
		db_not_taken_bkpt = db_set_temp_breakpoint(pc);
	}
}

void
db_clear_single_step(regs)
	db_regs_t *regs;
{
	if (cputyp == CPU_88110) {
		((regs)->epsr &= ~(PSR_TRACE | PSR_SER));
	} else {
		if (db_taken_bkpt != 0) {
			db_delete_temp_breakpoint(db_taken_bkpt);
			db_taken_bkpt = 0;
		}
		if (db_not_taken_bkpt != 0) {
			db_delete_temp_breakpoint(db_not_taken_bkpt);
			db_not_taken_bkpt = 0;
		}
	}
}
#endif