/* $OpenBSD: sclock.c,v 1.1 1999/09/27 18:43:25 smurph Exp $ */ /* * Copyright (c) 1999 Steve Murphree, Jr. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed under OpenBSD by * Theo de Raadt for Willowglen Singapore. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * Copyright (c) 1995 Nivas Madhur * Copyright (c) 1994 Gordon W. Ross * Copyright (c) 1993 Adam Glass * * This software was developed by the Computer Systems Engineering group * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and * contributed to Berkeley. * * All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ /* * Statistics clock driver. */ #include #include #include #include #ifdef GPROF #include #endif #include #include #include #include #include "pcctwo.h" #if NPCCTWO > 0 #include #endif #include "syscon.h" #if NSYSCON > 0 #include #endif #include extern struct vme2reg *sys_vme2; struct simplelock cio_lock; /* * Statistics clock interval and variance, in usec. Variance must be a * power of two. Since this gives us an even number, not an odd number, * we discard one case and compensate. That is, a variance of 4096 would * give us offsets in [0..4095]. Instead, we take offsets in [1..4095]. * This is symmetric about the point 2048, or statvar/2, and thus averages * to that value (assuming uniform random numbers). */ int statvar = 8192; int statmin; /* statclock interval - 1/2*variance */ static int sclockmatch __P((struct device *, void *, void *)); static void sclockattach __P((struct device *, struct device *, void *)); void sbc_initstatclock __P((void)); void m188_initstatclock __P((void)); void m188_cio_init __P((unsigned)); void write_cio __P((unsigned, unsigned)); struct sclocksoftc { struct device sc_dev; struct intrhand sc_statih; }; struct cfattach sclock_ca = { sizeof(struct sclocksoftc), sclockmatch, sclockattach }; struct cfdriver sclock_cd = { NULL, "sclock", DV_DULL, 0 }; int sbc_statintr __P((void *)); int m188_statintr __P((void *)); int sclockbus; u_char stat_reset; /* * Every machine needs, but doesn't have to have, a statistics clock. * For this platform, this file manages it, no matter what form it takes. */ int sclockmatch(parent, vcf, args) struct device *parent; void *vcf, *args; { register struct confargs *ca = args; register struct cfdata *cf = vcf; if (strcmp(cf->cf_driver->cd_name, "sclock")) { return (0); } /* * clock has to be at ipl 5 * We return the ipl here so that the parent can print * a message if it is different from what ioconf.c says. */ ca->ca_ipl = IPL_CLOCK; /* set size to 0 - see pcctwo.c:match for details */ ca->ca_len = 0; return (1); } void sclockattach(parent, self, args) struct device *parent, *self; void *args; { struct confargs *ca = args; struct sclocksoftc *sc = (struct sclocksoftc *)self; sclockbus = ca->ca_bustype; switch (sclockbus) { #if NPCCTWO > 0 case BUS_PCCTWO: sc->sc_statih.ih_fn = sbc_statintr; sc->sc_statih.ih_arg = 0; sc->sc_statih.ih_wantframe = 1; sc->sc_statih.ih_ipl = ca->ca_ipl; stat_reset = ca->ca_ipl | PCC2_IRQ_IEN | PCC2_IRQ_ICLR; pcctwointr_establish(PCC2V_TIMER2, &sc->sc_statih); mdfp.statclock_init_func = &sbc_initstatclock; printf(": VME1x7"); break; #endif /* NPCCTWO */ #if NSYSCON > 0 case BUS_SYSCON: sc->sc_statih.ih_fn = m188_statintr; sc->sc_statih.ih_arg = 0; sc->sc_statih.ih_wantframe = 1; sc->sc_statih.ih_ipl = ca->ca_ipl; sysconintr_establish(SYSCV_TIMER2, &sc->sc_statih); mdfp.statclock_init_func = &m188_initstatclock; printf(": VME188"); break; #endif /* NSYSCON */ } printf("\n"); } #if NPCCTWO > 0 void sbc_initstatclock(void) { register int statint, minint; #ifdef DEBUG printf("SBC statclock init\n"); #endif if (stathz == 0) stathz = hz; if (1000000 % stathz) { printf("cannot get %d Hz statclock; using 100 Hz\n", stathz); stathz = 100; } profhz = stathz; /* always */ statint = 1000000 / stathz; minint = statint / 2 + 100; while (statvar > minint) statvar >>= 1; /* statclock */ sys_pcc2->pcc2_t2ctl = 0; sys_pcc2->pcc2_t2cmp = pcc2_timer_us2lim(statint); sys_pcc2->pcc2_t2count = 0; sys_pcc2->pcc2_t2ctl = PCC2_TCTL_CEN | PCC2_TCTL_COC | PCC2_TCTL_COVF; sys_pcc2->pcc2_t2irq = stat_reset; statmin = statint - (statvar >> 1); } int sbc_statintr(cap) void *cap; { register u_long newint, r, var; sys_pcc2->pcc2_t2irq = stat_reset; statclock((struct clockframe *)cap); /* * Compute new randomized interval. The intervals are uniformly * distributed on [statint - statvar / 2, statint + statvar / 2], * and therefore have mean statint, giving a stathz frequency clock. */ var = statvar; do { r = random() & (var - 1); } while (r == 0); newint = statmin + r; sys_pcc2->pcc2_t2ctl = 0; sys_pcc2->pcc2_t2cmp = pcc2_timer_us2lim(newint); sys_pcc2->pcc2_t2count = 0; /* should I? */ sys_pcc2->pcc2_t2irq = stat_reset; sys_pcc2->pcc2_t2ctl = PCC2_TCTL_CEN | PCC2_TCTL_COC; return (1); } #endif /* NPCCTWO */ #if NSYSCON > 0 #define CIO_LOCK simple_lock(&cio_lock) #define CIO_UNLOCK simple_unlock(&cio_lock) int m188_statintr(cap) void *cap; { register u_long newint, r, var; CIO_LOCK; statclock((struct clockframe *)cap); write_cio(CIO_CSR1, CIO_GCB|CIO_CIP); /* Ack the interrupt */ /* * Compute new randomized interval. The intervals are uniformly * distributed on [statint - statvar / 2, statint + statvar / 2], * and therefore have mean statint, giving a stathz frequency clock. */ var = statvar; do { r = random() & (var - 1); } while (r == 0); newint = statmin + r; /* printf("newint = %d, 0x%x\n", newint, newint);*/ write_cio(CIO_CT1MSB, (newint & 0xFF00) >> 8); /* Load time constant CTC #1 */ write_cio(CIO_CT1LSB, newint & 0xFF); /* force a trigger event */ write_cio(CIO_CSR1, CIO_GCB|CIO_TCB|CIO_IE); /* Start CTC #1 running */ CIO_UNLOCK; return (1); } void m188_initstatclock(void) { register int statint, minint; #ifdef DEBUG printf("VME188 clock init\n"); #endif simple_lock_init(&cio_lock); if (stathz == 0) stathz = hz; if (1000000 % stathz) { printf("cannot get %d Hz statclock; using 100 Hz\n", stathz); stathz = 100; } profhz = stathz; /* always */ statint = 1000000 / stathz; minint = statint / 2 + 100; while (statvar > minint) statvar >>= 1; m188_cio_init(statint); statmin = statint - (statvar >> 1); } #define CIO_CNTRL 0xFFF8300C /* Write CIO register */ void write_cio(reg, val) unsigned reg,val; { int s, i; s = splclock(); /* Select register */ *((volatile int *) CIO_CTRL) = (reg & 0xFF); /* Write the value */ *((volatile int *) CIO_CTRL) = (val & 0xFF); splx(s); } /* Read CIO register */ static u_char read_cio(reg) unsigned reg; { int c; int s, i; volatile int *port = (volatile int *)CIO_CNTRL; s = splclock(); /* Select register */ *port = (char)(reg&0xFF); /* Delay for a short time to allow 8536 to settle */ for(i=0;i<100;i++); /* read the value */ c = *port; splx(s); return((u_char)c&0xFF); } /* * Initialize the CTC (8536) * Only the counter/timers are used - the IO ports are un-comitted. * Channels 1 and 2 are linked to provide a /32 counter. */ void m188_cio_init(unsigned p) { long i; short period; CIO_LOCK; period = p & 0xFFFF; /* Initialize 8536 CTC */ /* Start by forcing chip into known state */ (void) read_cio(CIO_MICR); write_cio(CIO_MICR, CIO_MICR_RESET); /* Reset the CTC */ for(i=0;i < 1000L; i++) /* Loop to delay */ ; /* Clear reset and start init seq. */ write_cio(CIO_MICR, 0x00); /* Wait for chip to come ready */ while((read_cio(CIO_MICR)) != (char) CIO_MICR_RJA) ; /* init Z8036 */ write_cio(CIO_MICR, CIO_MICR_MIE | CIO_MICR_NV | CIO_MICR_RJA | CIO_MICR_DLC); write_cio(CIO_CTMS1, CIO_CTMS_CSC); /* Continuous count */ write_cio(CIO_PDCB, 0xFF); /* set port B to input */ write_cio(CIO_CT1MSB, (period & 0xFF00) >> 8); /* Load time constant CTC #1 */ write_cio(CIO_CT1LSB, period & 0xFF); /* enable counter 1 */ write_cio(CIO_MCCR, CIO_MCCR_CT1E | CIO_MCCR_PBE); /* enable interrupts and start */ /*write_cio(CIO_IVR, SYSCV_TIMER2);*/ write_cio(CIO_CSR1, CIO_GCB|CIO_TCB|CIO_IE); /* Start CTC #1 running */ CIO_UNLOCK; } #endif /* NSYSCON */