/* $OpenBSD: vme.c,v 1.39 2004/08/02 08:35:00 miod Exp $ */ /* * Copyright (c) 2004, Miodrag Vallat. * Copyright (c) 1999 Steve Murphree, Jr. * Copyright (c) 1995 Theo de Raadt * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "pcctwo.h" #include "syscon.h" #include #if NSYSCON > 0 #include #include #endif int vmematch(struct device *, void *, void *); void vmeattach(struct device *, struct device *, void *); void vme2chip_init(struct vmesoftc *); void vmesyscon_init(struct vmesoftc *); u_long vme2chip_map(u_long, int); int vme2abort(void *); int sysconabort(void *); int vmeprint(void *, const char *); int vmebustype; unsigned int vmevecbase; struct cfattach vme_ca = { sizeof(struct vmesoftc), vmematch, vmeattach }; struct cfdriver vme_cd = { NULL, "vme", DV_DULL }; /* * bus_space routines for VME mappings */ int vme_map(bus_addr_t, bus_size_t, int, bus_space_handle_t *); void vme_unmap(bus_space_handle_t, bus_size_t); int vme_subregion(bus_space_handle_t, bus_size_t, bus_size_t, bus_space_handle_t *); void * vme_vaddr(bus_space_handle_t); const struct mvme88k_bus_space_tag vme_bustag = { vme_map, vme_unmap, vme_subregion, vme_vaddr }; /* * VME space mapping functions */ int vme_map(bus_addr_t addr, bus_size_t size, int flags, bus_space_handle_t *ret) { vaddr_t map; #if 0 map = iomap_mapin(addr, size, 0); #else map = (vaddr_t)mapiodev((void *)addr, size); #endif if (map == NULL) return ENOMEM; *ret = (bus_space_handle_t)map; return 0; } void vme_unmap(bus_space_handle_t handle, bus_size_t size) { #if 0 iomap_mapout(handle, size); #else unmapiodev((void *)handle, size); #endif } int vme_subregion(bus_space_handle_t handle, bus_addr_t offset, bus_size_t size, bus_space_handle_t *ret) { *ret = handle + offset; return (0); } void * vme_vaddr(bus_space_handle_t handle) { return (void *)handle; } /* * Extra D16 access functions * * D16 cards will trigger bus errors on attempting to read or write more * than 16 bits on the bus. Given how the m88k processor works, this means * basically that all long (D32) accesses must be carefully taken care of. * * Since the kernels bcopy() and bzero() routines will use 32 bit accesses * for performance, here are specific D16-compatible routines. They will * also revert to D8 operations if neither of the operands is properly * aligned. */ void d16_bcopy(const void *, void *, size_t); void d16_bzero(void *, size_t); void d16_bcopy(const void *src, void *dst, size_t len) { if ((vaddr_t)src & 1 || (vaddr_t)dst & 1) bus_space_write_region_1(&vme_bustag, 0, (vaddr_t)dst, (void *)src, len); else { bus_space_write_region_2(&vme_bustag, 0, (vaddr_t)dst, (void *)src, len / 2); if (len & 1) bus_space_write_1(&vme_bustag, 0, dst + len - 1, *(u_int8_t *)(src + len - 1)); } } void d16_bzero(void *dst, size_t len) { if ((vaddr_t)dst & 1) bus_space_set_region_1(&vme_bustag, 0, (vaddr_t)dst, 0, len); else { bus_space_set_region_2(&vme_bustag, 0, (vaddr_t)dst, 0, len / 2); if (len & 1) bus_space_write_1(&vme_bustag, 0, dst + len - 1, 0); } } /* * Configuration glue */ int vmematch(parent, cf, args) struct device *parent; void *cf; void *args; { #ifdef MVME187 if (brdtyp == BRD_8120) return (0); #endif return (1); } int vmeprint(args, bus) void *args; const char *bus; { struct confargs *ca = args; printf(" addr 0x%x", ca->ca_paddr); if (ca->ca_ipl > 0) printf(" ipl %d", ca->ca_ipl); if (ca->ca_vec > 0) printf(" vec 0x%x", ca->ca_vec); return (UNCONF); } int vmescan(parent, child, args, bustype) struct device *parent; void *child, *args; int bustype; { struct cfdata *cf = child; struct confargs oca, *ca = args; bzero(&oca, sizeof oca); oca.ca_iot = &vme_bustag; oca.ca_dmat = ca->ca_dmat; oca.ca_bustype = bustype; oca.ca_paddr = cf->cf_loc[0]; oca.ca_vec = cf->cf_loc[1]; oca.ca_ipl = cf->cf_loc[2]; if (oca.ca_ipl > 0 && oca.ca_vec < 0) oca.ca_vec = vme_findvec(-1); oca.ca_name = cf->cf_driver->cd_name; if ((*cf->cf_attach->ca_match)(parent, cf, &oca) == 0) return (0); config_attach(parent, cf, &oca, vmeprint); return (1); } void vmeattach(parent, self, args) struct device *parent, *self; void *args; { struct vmesoftc *sc = (struct vmesoftc *)self; struct confargs *ca = args; /* * This is a waste if we are attached to SYSCON - but then obio * mappings are free... */ sc->sc_iot = ca->ca_iot; if (bus_space_map(sc->sc_iot, ca->ca_paddr, PAGE_SIZE, 0, &sc->sc_ioh) != 0) { printf(": can't map registers!\n"); return; } vmebustype = ca->ca_bustype; switch (ca->ca_bustype) { #if NPCCTWO > 0 case BUS_PCCTWO: { u_int32_t vbr; /* Sanity check that the BUG is set up right */ vbr = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_VBR); vmevecbase = VME2_GET_VBR1(vbr) + 0x10; if (vmevecbase >= 0x100) { panic("Correct the VME Vector Base Registers " "in the Bug ROM.\n" "Suggested values are 0x60 for VME Vec0 and " "0x70 for VME Vec1."); } if ((bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_TCTL) & VME2_TCTL_SCON) != 0) printf(": system controller"); printf("\n"); vme2chip_init(sc); } break; #endif #if NSYSCON > 0 case BUS_SYSCON: { u_int8_t sconc; vmevecbase = 0x80; /* Hard coded for MVME188 */ sconc = *(volatile u_int8_t *)GLB1; if (ISSET(sconc, M188_SYSCON)) printf(": system controller"); printf("\n"); vmesyscon_init(sc); } break; #endif } while (config_found(self, NULL, NULL)) ; } /* find a VME vector based on what is in NVRAM settings. */ int vme_findvec(int skip) { return intr_findvec(vmevecbase, 0xff, skip); } /* * make local addresses 1G-2G correspond to VME addresses 3G-4G, * as D32 */ #define VME2_D32STARTPHYS (1*1024*1024*1024UL) #define VME2_D32ENDPHYS (2*1024*1024*1024UL) #define VME2_D32STARTVME (3*1024*1024*1024UL) #define VME2_D32BITSVME (3*1024*1024*1024UL) /* * make local addresses 3G-3.75G correspond to VME addresses 3G-3.75G, * as D16 */ #define VME2_D16STARTPHYS (3*1024*1024*1024UL) #define VME2_D16ENDPHYS (3*1024*1024*1024UL + 768*1024*1024UL) #define VME2_A32D16STARTPHYS (0xff000000UL) #define VME2_A32D16ENDPHYS (0xff7fffffUL) /* * Returns a physical address mapping for a VME address & length. * Note: on some hardware it is not possible to create certain * mappings, ie. the MVME147 cannot do 32 bit accesses to VME bus * addresses from 0 to physmem. */ void * vmepmap(sc, vmeaddr, bustype) struct device *sc; off_t vmeaddr; int bustype; { u_int32_t base = (u_int32_t)vmeaddr; /* wrap around 4GB */ switch (vmebustype) { #if NPCCTWO > 0 || NSYSCON > 0 case BUS_PCCTWO: case BUS_SYSCON: switch (bustype) { case BUS_VMES: /* D16 VME Transfers */ #ifdef DEBUG printf("base 0x%8llx/0x%8x\n", vmeaddr, base); #endif base = vme2chip_map(base, 16); #ifdef DEBUG if (base == NULL) { printf("%s: cannot map pa 0x%x\n", sc->dv_xname, base); } #endif break; case BUS_VMEL: /* D32 VME Transfers */ #ifdef DEBUG printf("base 0x%8llx/0x%8x\n", vmeaddr, base); #endif base = vme2chip_map(base, 32); #ifdef DEBUG if (base == NULL) { printf("%s: cannot map pa 0x%x\n", sc->dv_xname, base); } #endif break; } break; #endif default: return NULL; } return ((void *)base); } static void *vmemap(struct vmesoftc *, off_t); static void vmeunmap(void *); /* if successful, returns the va of a vme bus mapping */ static __inline__ void * vmemap(struct vmesoftc *sc, off_t vmeaddr) { void *pa; pa = vmepmap((struct device *)sc, vmeaddr, BUS_VMES); if (pa == NULL) return (NULL); return mapiodev(pa, PAGE_SIZE); } static __inline__ void vmeunmap(void *va) { unmapiodev(va, PAGE_SIZE); } int vmerw(sc, uio, flags, bus) struct device *sc; struct uio *uio; int flags; int bus; { vaddr_t v; int c; struct iovec *iov; void *vme; int error = 0; while (uio->uio_resid > 0 && error == 0) { iov = uio->uio_iov; if (iov->iov_len == 0) { uio->uio_iov++; uio->uio_iovcnt--; if (uio->uio_iovcnt < 0) panic("vmerw"); continue; } v = uio->uio_offset; c = min(iov->iov_len, MAXPHYS); if ((v & PGOFSET) + c > PAGE_SIZE) /* max 1 page at a time */ c = PAGE_SIZE - (v & PGOFSET); if (c == 0) return 0; vme = vmemap((struct vmesoftc *)sc, v & ~PGOFSET); if (vme == NULL) return EACCES; error = uiomove((void *)vme + (v & PGOFSET), c, uio); vmeunmap(vme); } return error; } /* * On the VMEbus, only one cpu may be configured to respond to any * particular vme ipl. Therefore, it wouldn't make sense to globally * enable all the interrupts all the time -- it would not be possible * to put two cpu's and one vme card into a single cage. Rather, we * enable each vme interrupt only when we are attaching a device that * uses it. This makes it easier (though not trivial) to put two cpu * cards in one VME cage, and both can have some limited access to vme * interrupts (just can't share the same irq). * Obviously no check is made to see if another cpu is using that * interrupt. If you share you will lose. */ /* * All VME bus devices will use a vector starting with VBR1 + 0x10 * and determined by intr_findvec(). (in machdep.c) vmeintr_establish() * should be called with the 'vec' argument = 0 to 'auto vector' a * VME device. * * The 8 SW interrupters will start with VBR1. The rest will start * with VBR0< 4) & 0xFF. */ int vmeintr_establish(int vec, struct intrhand *ih, const char *name) { struct vmesoftc *sc = (struct vmesoftc *) vme_cd.cd_devs[0]; switch (vmebustype) { #if NPCCTWO > 0 case BUS_PCCTWO: bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_IRQEN, bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_IRQEN) | VME2_IRQ_VME(ih->ih_ipl)); break; #endif } return intr_establish(vec, ih, name); } #if NPCCTWO > 0 void vme2chip_init(sc) struct vmesoftc *sc; { u_int32_t ctl, irqen, master, master4mod; /* turn off SYSFAIL LED */ bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_TCTL, bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_TCTL) & ~VME2_TCTL_SYSFAIL); /* * Display the VMEChip2 decoder status. */ printf("%s: using BUG parameters\n", sc->sc_dev.dv_xname); ctl = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_GCSRCTL); if (ctl & VME2_GCSRCTL_MDEN1) { master = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_MASTER1); printf("%s: 1phys 0x%08lx-0x%08lx to VME 0x%08lx-0x%08lx\n", sc->sc_dev.dv_xname, master << 16, master & 0xffff0000, master << 16, master & 0xffff0000); } if (ctl & VME2_GCSRCTL_MDEN2) { master = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_MASTER2); printf("%s: 2phys 0x%08lx-0x%08lx to VME 0x%08lx-0x%08lx\n", sc->sc_dev.dv_xname, master << 16, master & 0xffff0000, master << 16, master & 0xffff0000); } if (ctl & VME2_GCSRCTL_MDEN3) { master = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_MASTER3); printf("%s: 3phys 0x%08lx-0x%08lx to VME 0x%08lx-0x%08lx\n", sc->sc_dev.dv_xname, master << 16, master & 0xffff0000, master << 16, master & 0xffff0000); } if (ctl & VME2_GCSRCTL_MDEN4) { master = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_MASTER4); master4mod = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_MASTER4MOD); printf("%s: 4phys 0x%08lx-0x%08lx to VME 0x%08lx-0x%08lx\n", sc->sc_dev.dv_xname, master << 16, master & 0xffff0000, (master << 16) + (master4mod << 16), (master & 0xffff0000) + (master4mod & 0xffff0000)); } /* * Map the VME irq levels to the cpu levels 1:1. * This is rather inflexible, but much easier. */ bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_IRQL4, (7 << VME2_IRQL4_VME7SHIFT) | (6 << VME2_IRQL4_VME6SHIFT) | (5 << VME2_IRQL4_VME5SHIFT) | (4 << VME2_IRQL4_VME4SHIFT) | (3 << VME2_IRQL4_VME3SHIFT) | (2 << VME2_IRQL4_VME2SHIFT) | (1 << VME2_IRQL4_VME1SHIFT)); printf("%s: vme to cpu irq level 1:1\n",sc->sc_dev.dv_xname); /* Enable the reset switch */ bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_TCTL, VME2_TCTL_RSWE | bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_TCTL)); /* Set Watchdog timeout to about 1 minute */ bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_TCR, VME2_TCR_64S | bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_TCR)); /* Enable VMEChip2 Interrupts */ bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_VBR, VME2_IOCTL1_MIEN | bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_VBR)); /* * Map the Software VME irq levels to the cpu level 7. */ bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_IRQL3, (7 << VME2_IRQL3_SW7SHIFT) | (7 << VME2_IRQL3_SW6SHIFT) | (7 << VME2_IRQL3_SW5SHIFT) | (7 << VME2_IRQL3_SW4SHIFT) | (7 << VME2_IRQL3_SW3SHIFT) | (7 << VME2_IRQL3_SW2SHIFT) | (7 << VME2_IRQL3_SW1SHIFT)); /* * pseudo driver, abort interrupt handler */ sc->sc_abih.ih_fn = vme2abort; sc->sc_abih.ih_arg = 0; sc->sc_abih.ih_wantframe = 1; sc->sc_abih.ih_ipl = IPL_NMI; intr_establish(110, &sc->sc_abih, sc->sc_dev.dv_xname); irqen = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_IRQEN); irqen |= VME2_IRQ_AB; /* bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_IRQEN, irqen); */ /* * Enable ACFAIL interrupt, but disable Timer 1 interrupt - we * prefer it without for delay(). */ irqen = (irqen | VME2_IRQ_ACF) & ~VME2_IRQ_TIC1; bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_IRQEN, irqen); } #endif /* NPCCTWO */ #if NSYSCON > 0 void vmesyscon_init(sc) struct vmesoftc *sc; { /* * Nothing to do - though we ought to check the settings and * print them. Abort button vector has already been setup in * sysconattach(). */ } #endif /* NSYSCON */ /* * A32 accesses on the MVME1[6789]x require setting up mappings in * the VME2 chip. * XXX VME address must be between 2G and 4G * XXX We only support D32 at the moment.. * XXX smurph - This is bogus, get rid of it! Should check vme/syscon for offsets. */ u_long vme2chip_map(base, dwidth) u_long base; int dwidth; { /* * Since we are checking range for one page only, no need to check * for address wraparound. */ switch (dwidth) { case 16: if (base < VME2_D16STARTPHYS || base + PAGE_SIZE > VME2_D16ENDPHYS) return NULL; break; case 32: if (base < VME2_D32STARTPHYS || base + PAGE_SIZE > VME2_D32ENDPHYS) return NULL; break; default: return NULL; } return base; } #if NPCCTWO > 0 int vme2abort(eframe) void *eframe; { struct frame *frame = eframe; struct vmesoftc *sc = (struct vmesoftc *)vme_cd.cd_devs[0]; if ((bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_IRQSTAT) & VME2_IRQ_AB) == 0) { printf("%s: abort irq not set\n", sc->sc_dev.dv_xname); return (0); } bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_IRQCLR, VME2_IRQ_AB); nmihand(frame); return (1); } #endif