/*	$OpenBSD: vme.c,v 1.4 1999/09/27 18:43:25 smurph Exp $ */
/*
 * Copyright (c) 1999 Steve Murphree, Jr.
 * Copyright (c) 1995 Theo de Raadt
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Theo de Raadt
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/param.h>
#include <sys/conf.h>
#include <sys/ioctl.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/tty.h>
#include <sys/uio.h>
#include <sys/callout.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/fcntl.h>
#include <sys/device.h>
#include <vm/vm.h>
#include <vm/vm_map.h>
#include <vm/vm_kern.h>
#include "machine/autoconf.h"
#include "machine/cpu.h"
#include "machine/frame.h"
#include "machine/pmap.h"

#include "pcctwo.h"
#include "syscon.h"

#include <mvme88k/dev/vme.h>
#if NSYSCON > 0 
#include <mvme88k/dev/sysconreg.h>
#endif

int  vmematch __P((struct device *, void *, void *));
void vmeattach __P((struct device *, struct device *, void *));

int vme2chip_init __P((struct vmesoftc *sc));
u_long vme2chip_map __P((u_long base, int len, int dwidth));
int vme2abort __P((struct frame *frame));
int sysconabort __P((struct frame *frame));

static int vmebustype;
struct vme2reg *sys_vme2 = NULL;

struct cfattach vme_ca = {
        sizeof(struct vmesoftc), vmematch, vmeattach
}; 
 
struct cfdriver vme_cd = {
        NULL, "vme", DV_DULL, 0
}; 

int
vmematch(parent, cf, args)
	struct device *parent;
	void *cf;
	void *args;
{
	struct confargs *ca = args;
	return (1);
}

/*
 * make local addresses 1G-2G correspond to VME addresses 3G-4G,
 * as D32
 */

#define VME2_D32STARTPHYS	(1*1024*1024*1024UL)
#define VME2_D32ENDPHYS		(2*1024*1024*1024UL)
#define VME2_D32STARTVME	(3*1024*1024*1024UL)
#define VME2_D32BITSVME		(3*1024*1024*1024UL)

/*
 * make local addresses 3G-3.75G correspond to VME addresses 3G-3.75G,
 * as D16
 */
#define VME2_D16STARTPHYS	(3*1024*1024*1024UL)
#define VME2_D16ENDPHYS		(3*1024*1024*1024UL + 768*1024*1024UL)
#define VME2_A32D16STARTPHYS	(0xFF000000UL)
#define VME2_A32D16ENDPHYS		(0xFF7FFFFFUL)


/*
 * Returns a physical address mapping for a VME address & length.
 * Note: on some hardware it is not possible to create certain
 * mappings, ie. the MVME147 cannot do 32 bit accesses to VME bus
 * addresses from 0 to physmem.
 */
void *
vmepmap(sc, vmeaddr, len, bustype)
	struct vmesoftc *sc;
	void *vmeaddr;
	int len;
	int bustype;
{
	u_int32_t base = (u_int32_t)vmeaddr;

	len = roundup(len, NBPG);
	switch (vmebustype) {
#if NPCCTWO > 0 || NSYSCON > 0
	case BUS_PCCTWO:
	case BUS_SYSCON:
		switch (bustype) {
		case BUS_VMES:		/* D16 VME Transfers */
			/*printf("base 0x%8x/0x%8x len 0x%x\n", vmeaddr, base, len);*/
			base = vme2chip_map(base, len, 16);
			if (base == NULL){
				printf("%s: cannot map pa 0x%x len 0x%x\n",
				    sc->sc_dev.dv_xname, base, len);
				return (NULL);
			}
			break;
		case BUS_VMEL:		/* D32 VME Transfers */
			printf("base 0x%8x/0x%8x len 0x%x\n",
				vmeaddr, base, len);
			base = vme2chip_map(base, len, 32);
			if (base == NULL){
				printf("%s: cannot map pa 0x%x len 0x%x\n",
				    sc->sc_dev.dv_xname, base, len);
				return (NULL);
			}
			break;
		}
		break;
#endif
	}
	return ((void *)base);
}

/* if successful, returns the va of a vme bus mapping */
void *
vmemap(sc, vmeaddr, len, bustype)
	struct vmesoftc *sc;
	void *vmeaddr;
	int len;
	int bustype;
{
	void *pa, *va;

	pa = vmepmap(sc, vmeaddr, len, bustype);
	if (pa == NULL)
		return (NULL);
	va = mapiodev(pa, len);
	return (va);
}

void
vmeunmap(va, len)
	void *va;
	int len;
{
	unmapiodev(va, len);
}

int
vmerw(sc, uio, flags, bus)
	struct vmesoftc *sc;
	struct uio *uio;
	int flags;
	int bus;
{
	register vm_offset_t o, v;
	register int c;
	register struct iovec *iov;
	void *vme;
	int error = 0;

	while (uio->uio_resid > 0 && error == 0) {
		iov = uio->uio_iov;
		if (iov->iov_len == 0) {
			uio->uio_iov++;
			uio->uio_iovcnt--;
			if (uio->uio_iovcnt < 0)
				panic("vmerw");
			continue;
		}

		v = uio->uio_offset;
		c = min(iov->iov_len, MAXPHYS);
		if ((v & PGOFSET) + c > NBPG)	/* max NBPG at a time */
			c = NBPG - (v & PGOFSET);
		if (c == 0)
			return (0);
		vme = vmemap(sc, (void *)(v & ~PGOFSET),
		    NBPG, BUS_VMES);
		if (vme == NULL) {
			error = EFAULT;	/* XXX? */
			continue;
		}
		error = uiomove((void *)vme + (v & PGOFSET), c, uio);
		vmeunmap(vme, NBPG);
	}
	return (error);
}

int
vmeprint(args, bus)
	void *args;
	const char *bus;
{
	struct confargs *ca = args;

	printf(" addr 0x%x", ca->ca_offset);
	printf(" vaddr 0x%x", ca->ca_vaddr);
	if (ca->ca_vec > 0)
		printf(" vec 0x%x", ca->ca_vec);
	if (ca->ca_ipl > 0)
		printf(" ipl %d", ca->ca_ipl);
	return (UNCONF);
}

int
vmescan(parent, child, args, bustype)
	struct device *parent;
	void *child, *args;
	int bustype;
{
	struct cfdata *cf = child;
	struct vmesoftc *sc = (struct vmesoftc *)parent;
	struct confargs *ca = args;
	struct confargs oca;

	if (parent->dv_cfdata->cf_driver->cd_indirect) {
		printf(" indirect devices not supported\n");
		return 0;
	}

	bzero(&oca, sizeof oca);
	oca.ca_bustype = bustype;
	oca.ca_paddr = (void *)cf->cf_loc[0];
	oca.ca_len = cf->cf_loc[1];
	oca.ca_vec = cf->cf_loc[2];
	oca.ca_ipl = cf->cf_loc[3];
	if (oca.ca_ipl > 0 && oca.ca_vec == -1)
		oca.ca_vec = intr_findvec(255, 0);
	if (oca.ca_len == -1)
		oca.ca_len = 4096;

	oca.ca_offset = (u_int)oca.ca_paddr;
	oca.ca_vaddr = vmemap(sc, oca.ca_paddr, oca.ca_len, oca.ca_bustype);
	if (!oca.ca_vaddr)
		oca.ca_vaddr = (void *)-1;
	oca.ca_master = (void *)sc;
	oca.ca_name = cf->cf_driver->cd_name;
	if ((*cf->cf_attach->ca_match)(parent, cf, &oca) == 0) {
		if (oca.ca_vaddr != (void *)-1)
			vmeunmap(oca.ca_vaddr, oca.ca_len);
		return (0);
	}
	/*
	 * If match works, the driver is responsible for
	 * vmunmap()ing if it does not need the mapping. 
	 */
	config_attach(parent, cf, &oca, vmeprint);
	return (1);
}

void
vmeattach(parent, self, args)
	struct device *parent, *self;
	void *args;
{
	struct vmesoftc *sc = (struct vmesoftc *)self;
	struct confargs *ca = args;
	struct vme1reg *vme1;
	struct vme2reg *vme2;
	int scon;
   char sconc;

	/* XXX any initialization to do? */

	sc->sc_vaddr = ca->ca_vaddr;

	vmebustype = ca->ca_bustype;
	switch (ca->ca_bustype) {
#if NPCCTWO > 0
	case BUS_PCCTWO:
		vme2 = (struct vme2reg *)sc->sc_vaddr;
		scon = (vme2->vme2_tctl & VME2_TCTL_SCON);
		printf(": %ssystem controller\n", scon ? "" : "not ");
      if (scon) sys_vme2 = vme2;
		vme2chip_init(sc);
		break;
#endif
#if NSYSCON > 0
	case BUS_SYSCON:
		vme2 = (struct vme2reg *)sc->sc_vaddr;
      sconc = *(char *)GLOBAL1;
      sconc &= M188_SYSCON;
		printf(": %ssystem controller\n", scon ? "" : "not ");
		vmesyscon_init(sc);
		break;
#endif
	}

	while (config_found(self, NULL, NULL))
		;
}

/*
 * On the VMEbus, only one cpu may be configured to respond to any
 * particular vme ipl. Therefore, it wouldn't make sense to globally
 * enable all the interrupts all the time -- it would not be possible
 * to put two cpu's and one vme card into a single cage. Rather, we
 * enable each vme interrupt only when we are attaching a device that
 * uses it. This makes it easier (though not trivial) to put two cpu
 * cards in one VME cage, and both can have some limited access to vme
 * interrupts (just can't share the same irq).
 * Obviously no check is made to see if another cpu is using that
 * interrupt. If you share you will lose.
 */
int
vmeintr_establish(vec, ih)
	int vec;
	struct intrhand *ih;
{
	struct vmesoftc *sc = (struct vmesoftc *) vme_cd.cd_devs[0];
#if NPCCTWO > 0
	struct vme2reg *vme2;
#endif
#if NSYSCON > 0
	struct sysconreg *syscon;
#endif
	int x;

	x = (intr_establish(vec, ih));

	switch (vmebustype) {
#if NPCCTWO > 0
	case BUS_PCCTWO:
		vme2 = (struct vme2reg *)sc->sc_vaddr;
		vme2->vme2_irqen = vme2->vme2_irqen |
		    VME2_IRQ_VME(ih->ih_ipl);
		break;
#endif
#if NSYSCON > 0 
	case BUS_SYSCON:
		syscon = (struct sysconreg *)sc->sc_vaddr;
		/*
      syscon->vme2_irqen = vme2->vme2_irqen |
		    VMES_IRQ_VME(ih->ih_ipl);
      */
		break;
#endif
	}
	return (x);
}

#if NPCCTWO > 0
int
vme2chip_init(sc)
	struct vmesoftc *sc;
{
	struct vme2reg *vme2 = (struct vme2reg *)sc->sc_vaddr;
	u_long ctl, addr, vasize;

	/* turn off SYSFAIL LED */
	vme2->vme2_tctl &= ~VME2_TCTL_SYSFAIL;

	ctl = vme2->vme2_masterctl;
	printf("%s: using BUG parameters\n", sc->sc_dev.dv_xname);
	/* setup a A32D16 space */
	printf("%s: 1phys 0x%08x-0x%08x to VME 0x%08x-0x%08x\n",
	    sc->sc_dev.dv_xname,
	    vme2->vme2_master1 << 16, vme2->vme2_master1 & 0xffff0000,
	    vme2->vme2_master1 << 16, vme2->vme2_master1 & 0xffff0000);

	/* setup a A32D32 space */
	printf("%s: 2phys 0x%08x-0x%08x to VME 0x%08x-0x%08x\n",
	    sc->sc_dev.dv_xname,
	    vme2->vme2_master2 << 16, vme2->vme2_master2 & 0xffff0000,
	    vme2->vme2_master2 << 16, vme2->vme2_master2 & 0xffff0000);

	/* setup a A24D16 space */
	printf("%s: 3phys 0x%08x-0x%08x to VME 0x%08x-0x%08x\n",
	    sc->sc_dev.dv_xname,
	    vme2->vme2_master3 << 16, vme2->vme2_master3 & 0xffff0000,
	    vme2->vme2_master3 << 16, vme2->vme2_master3 & 0xffff0000);

	/* setup a XXXXXX space */
	printf("%s: 4phys 0x%08x-0x%08x to VME 0x%08x-0x%08x\n",
	    sc->sc_dev.dv_xname,
	    vme2->vme2_master4 << 16, vme2->vme2_master4 & 0xffff0000,
	    vme2->vme2_master4 << 16 + vme2->vme2_master4mod << 16,
       vme2->vme2_master4 & 0xffff0000 + vme2->vme2_master4 & 0xffff0000);
	/*
	 * Map the VME irq levels to the cpu levels 1:1.
	 * This is rather inflexible, but much easier.
	 */
	vme2->vme2_irql4 = (7 << VME2_IRQL4_VME7SHIFT) |
	    (6 << VME2_IRQL4_VME6SHIFT) | (5 << VME2_IRQL4_VME5SHIFT) |
	    (4 << VME2_IRQL4_VME4SHIFT) | (3 << VME2_IRQL4_VME3SHIFT) |
	    (2 << VME2_IRQL4_VME2SHIFT) | (1 << VME2_IRQL4_VME1SHIFT);
	printf("%s: vme to cpu irq level 1:1\n",sc->sc_dev.dv_xname);
	/*
	printf("%s: vme2_irql4 = 0x%08x\n",	sc->sc_dev.dv_xname,
	    vme2->vme2_irql4);
	*/
	if (vmebustype == BUS_PCCTWO){
		/* 
		 * pseudo driver, abort interrupt handler
		 */
		sc->sc_abih.ih_fn = vme2abort;
		sc->sc_abih.ih_arg = 0;
		sc->sc_abih.ih_ipl = IPL_NMI;
		sc->sc_abih.ih_wantframe = 1;
		intr_establish(110, &sc->sc_abih);
		vme2->vme2_irqen |= VME2_IRQ_AB;
	}
	vme2->vme2_irqen = vme2->vme2_irqen | VME2_IRQ_ACF;
}
#endif /* NPCCTWO */

#if NSYSCON > 0
int
vmesyscon_init(sc)
	struct vmesoftc *sc;
{
	struct sysconreg *syscon = (struct sysconreg *)sc->sc_vaddr;
	u_long ctl, addr, vasize;

#ifdef TODO
	/* turn off SYSFAIL LED */
	vme2->vme2_tctl &= ~VME2_TCTL_SYSFAIL;

	ctl = vme2->vme2_masterctl;
	printf("%s: using BUG parameters\n", sc->sc_dev.dv_xname);
   printf("%s: 1phys 0x%08x-0x%08x to VME 0x%08x-0x%08x master\n",
	    sc->sc_dev.dv_xname,
	    vme2->vme2_master1 << 16, vme2->vme2_master1 & 0xffff0000,
	    vme2->vme2_master1 << 16, vme2->vme2_master1 & 0xffff0000);
	printf("%s: 2phys 0x%08x-0x%08x to VME 0x%08x-0x%08x slave\n",
	    sc->sc_dev.dv_xname,
	    vme2->vme2_master2 << 16, vme2->vme2_master2 & 0xffff0000,
	    vme2->vme2_master2 << 16, vme2->vme2_master2 & 0xffff0000);

   /* 
    * pseudo driver, abort interrupt handler
    */
   sc->sc_abih.ih_fn = sysconabort;
   sc->sc_abih.ih_arg = 0;
   sc->sc_abih.ih_ipl = IPL_NMI;
   sc->sc_abih.ih_wantframe = 1;
   intr_establish(110, &sc->sc_abih);
#endif /* TODO */
}
#endif /* NSYSCON */

#if defined(MVME162) || defined(MVME167) || defined(MVME177) || defined (MVME187) || defined (MVME197)

/*
 * A32 accesses on the MVME1[6789]x require setting up mappings in
 * the VME2 chip.
 * XXX VME address must be between 2G and 4G
 * XXX We only support D32 at the moment..
 * XXX smurph - This is bogus, get rid of it! Should check vme/syson for offsets.
 */
u_long
vme2chip_map(base, len, dwidth)
	u_long base;
	int len, dwidth;
{
	switch (dwidth) {
	case 16:
		return (base);
	case 32:
		if (base < VME2_D32STARTPHYS ||
		    base + (u_long)len > VME2_D32ENDPHYS)
			return (NULL);
		return (base);
	}
}

#if NPCCTWO > 0
int
vme2abort(frame)
	struct frame *frame;
{
	struct vmesoftc *sc = (struct vmesoftc *) vme_cd.cd_devs[0];
	struct vme2reg *vme2 = (struct vme2reg *)sc->sc_vaddr;

	if (vme2->vme2_irqstat & VME2_IRQ_AB == 0) {
		printf("%s: abort irq not set\n", sc->sc_dev.dv_xname);
		return (0);
	}
	vme2->vme2_irqclr = VME2_IRQ_AB;
	nmihand(frame);
	return (1);
}
#endif
#endif /* MVME1[678]x */