/* * Mach Operating System * Copyright (c) 1993-1992 Carnegie Mellon University * Copyright (c) 1991 OMRON Corporation * All Rights Reserved. * * Permission to use, copy, modify and distribute this software and its * documentation is hereby granted, provided that both the copyright * notice and this permission notice appear in all copies of the * software, derivative works or modified versions, and any portions * thereof, and that both notices appear in supporting documentation. * * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. * * Carnegie Mellon requests users of this software to return to * * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU * School of Computer Science * Carnegie Mellon University * Pittsburgh PA 15213-3890 * * any improvements or extensions that they make and grant Carnegie the * rights to redistribute these changes. */ #ifndef __M88K_ASM_H__ #define __M88K_ASM_H__ #ifdef __STDC__ # define FUNC(NAME) _##NAME #else # define FUNC(NAME) _/**/NAME #endif /* Define EH_DEBUG to be non-zero to compile-in various debugging things */ #ifndef EH_DEBUG #define EH_DEBUG 0 #endif EH_DEBUG #if 0 /* this gives the offsets into various structures of various elements, etc */ #include "assym.s" #endif #define ENTRY(NAME) \ .align 8; .globl FUNC(NAME); FUNC(NAME): #define LABEL(name) name:; .globl name ; /* * _LABEL(name) * Defines one visible only to the file, unless debugging * is enabled, in which case it's visible to the world (and * hence to debuggers, and such). */ #if EH_DEBUG # define _LABEL(name) name: .globl name ; #else # define _LABEL(name) name: ; #endif #define RTE NOP ; rte #define PID cr0 #define PSR cr1 #define EPSR cr2 #define SSBR cr3 #define SXIP cr4 #define SNIP cr5 #define SFIP cr6 #define VBR cr7 #define DMT0 cr8 #define DMD0 cr9 #define DMA0 cr10 #define DMT1 cr11 #define DMD1 cr12 #define DMA1 cr13 #define DMT2 cr14 #define DMD2 cr15 #define DMA2 cr16 #define SR0 cr17 #define SR1 cr18 #define SR2 cr19 #define SR3 cr20 #define FPECR fcr0 #define FPHS1 fcr1 #define FPLS1 fcr2 #define FPHS2 fcr3 #define FPLS2 fcr4 #define FPPT fcr5 #define FPRH fcr6 #define FPRL fcr7 #define FPIT fcr8 #define FPSR fcr62 #define FPCR fcr63 /* * At various times, there is the need to clear the pipeline (i.e. * synchronize). A "tb1 0, r0, foo" will do that (because a trap * instruction always synchronizes, and this particular instruction * will never actually take the trap). */ #define FLUSH_PIPELINE tb1 0, r0, 0 #define NOP or r0, r0, r0 /* * Useful in some situations. * NOTE: If ARG1 or ARG2 are r2 or r3, strange things may happen. Watch out! */ #define CALL(NAME, ARG1, ARG2) \ subu r31, r31, 32 ; \ or r2, r0, ARG1 ; \ bsr.n NAME ; \ or r3, r0, ARG2 ; \ addu r31, r31, 32 /* * SR1 - CPU FLAGS REGISTER * XXX clean this when the trap handler is reworked. Among the things * I like to see is having the trap frame on the kernel stack instead * of putting in the PCB. If done properly, we don't need SR1 for doing * anything special. nivas * * SR1 contains flags about the current CPU status. * * The bit FLAG_IGNORE_DATA_EXCEPTION indicates that any data exceptions * should be ignored (well, at least treated in a special way). * The bit FLAG_INTERRUPT_EXCEPTION indicates that the current exception * is the interrupt exception. Such information can be gotten * in other ways, but having it in the flags makes it easy for the * exception handler to check quickly. * The bit FLAG_ENABLING_FPU indicates that the exception handler is * in the process of enabling the FPU (so that an exception can * be serviced). This is needed because enabling the FPU can * cause other exceptions to happen, and the whole system is * in a rather precarious state and so special cautions must * be taken. */ #define FLAG_CPU_FIELD_WIDTH 4 /* must be <= 12 */ #define FLAG_IGNORE_DATA_EXCEPTION 5 /* bit number 5 */ #define FLAG_INTERRUPT_EXCEPTION 6 /* bit number 6 */ #define FLAG_ENABLING_FPU 7 /* bit number 7 */ /* REGister OFFset into the E.F. (exception frame) */ #define REG_OFF(reg_num) ((reg_num) * 4) /* (num * sizeof(register int)) */ #define GENREG_OFF(num) (REG_OFF(EF_R0 + (num))) /* GENeral REGister OFFset */ #define GENERAL_BREATHING_ROOM /* arbitrarily */ 200 #define KERNEL_STACK_BREATHING_ROOM \ (GENERAL_BREATHING_ROOM + SIZEOF_STRUCT_PCB + SIZEOF_STRUCT_UTHREAD) /* * Some registers used during the setting up of the new exception frame. * Don't choose r1, r30, or r31 for any of them. * * Also, if any are 'r2' or 'r3', be careful using with CALL above! */ #define FLAGS r2 #define TMP r3 #define TMP2 r10 #define TMP3 r11 #define SAVE_TMP2 st r10, r31, GENREG_OFF(10) #define SAVE_TMP3 st r11, r31, GENREG_OFF(11) #define RESTORE_TMP2 ld r10, r31, GENREG_OFF(10) #define RESTORE_TMP3 ld r11, r31, GENREG_OFF(11) /* * Info about the PSR */ #define PSR_SHADOW_FREEZE_BIT 0 #define PSR_INTERRUPT_DISABLE_BIT 1 #define PSR_FPU_DISABLE_BIT 3 #define PSR_BIG_ENDIAN_MODE 30 #define PSR_SUPERVISOR_MODE_BIT 31 /* * Status bits for an SXIP/SNIP/SFIP address. */ #define RTE_VALID_BIT 1 #define RTE_ERROR_BIT 0 /* * Info about DMT0/DMT1/DMT2 */ #define DMT_VALID_BIT 0 #define DMT_WRITE_BIT 1 #define DMT_LOCK_BIT 12 #define DMT_DOUBLE_BIT 13 #define DMT_DAS_BIT 14 #define DMT_DREG_OFFSET 7 #define DMT_DREG_WIDTH 5 /* * Bits for eh_debug. */ #define DEBUG_INTERRUPT_BIT 0 #define DEBUG_DATA_BIT 1 #define DEBUG_INSTRUCTION_BIT 2 #define DEBUG_MISALIGN_BIT 3 #define DEBUG_UNIMP_BIT 4 #define DEBUG_DIVIDE_BIT 5 #define DEBUG_OF_BIT 6 #define DEBUG_FPp_BIT 7 #define DEBUG_FPi_BIT 8 #define DEBUG_SYSCALL_BIT 9 #define DEBUG_MACHSYSCALL_BIT 10 #define DEBUG_UNIMPLEMENTED_BIT 11 #define DEBUG_PRIVILEGE_BIT 12 #define DEBUG_BOUNDS_BIT 13 #define DEBUG_OVERFLOW_BIT 14 #define DEBUG_ERROR_BIT 15 #define DEBUG_SIGSYS_BIT 16 #define DEBUG_SIGTRAP_BIT 17 #define DEBUG_BREAK_BIT 18 #define DEBUG_TRACE_BIT 19 #define DEBUG_KDB_BIT 20 #define DEBUG_JKDB_BIT 21 #define DEBUG_BUGCALL_BIT 22 #define DEBUG_UNKNOWN_BIT 31 /* * These things for vector_init.c and locore.c */ #if defined(ASSEMBLER) # define PREDEFINED_BY_ROM 0xffffffff # define END_OF_VECTOR_LIST 0xfffffffe #else # define PREDEFINED_BY_ROM 0xffffffffU # define END_OF_VECTOR_LIST 0xfffffffeU #endif /* * Define ERROR__XXX_USR if the xxx.usr bug (mask C82N) is present. * This implements the workaround. */ #define ERRATA__XXX_USR 1 #if !defined(CMMU_I) #define CMMU_I 0xFFF77000 #endif #if !defined(CMMU_D) #define CMMU_D 0xFFF7F000 #endif #endif /* __M88K_ASM_H__ */