/* $OpenBSD: param.h,v 1.3 1997/02/28 22:57:38 niklas Exp $ */ /* * Copyright (c) 1988 University of Utah. * Copyright (c) 1982, 1986, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah $Hdr: machparam.h 1.11 89/08/14$ */ #ifndef _MACHINE_PARAM_H_ #define _MACHINE_PARAM_H_ /* * Machine dependent constants for mvme88k */ #define MACHINE "mvme88k" #define _MACHINE mvme88k #define MACHINE_ARCH "m88k" #define _MACHINE_ARCH m88k #define MID_MACHINE MID_M88K /* * Round p (pointer or byte index) up to a correctly-aligned value * for all data types (int, long, ...). The result is u_int and * must be cast to any desired pointer type. */ #define ALIGNBYTES (sizeof(int) - 1) #define ALIGN(p) (((u_int)(p) + (sizeof(int) - 1)) &~ (sizeof(int) - 1)) #ifndef NBPG #define NBPG 4096 /* bytes/page */ #endif /* NBPG */ #define PGOFSET (NBPG-1) /* byte offset into page */ #define PGSHIFT 12 /* LOG2(NBPG) */ #define NPTEPG (NBPG/(sizeof(u_int))) #define NBSEG (1<<22) /* bytes/segment */ #define SEGOFSET (NBSEG-1) /* byte offset into segment */ #define SEGSHIFT 22 /* LOG2(NBSEG) */ /* * 187 Bug uses the bottom 64k. We allocate ptes to map this into the * kernel. But when we link the kernel, we tell it to start linking * past this 64k. How does this change KERNBASE? XXX */ #define KERNBASE 0x0 /* start of kernel virtual */ #define BTOPKERNBASE ((u_long)KERNBASE >> PGSHIFT) #define DEV_BSIZE 512 #define DEV_BSHIFT 9 /* log2(DEV_BSIZE) */ #define BLKDEV_IOSIZE 2048 /* Should this be changed? XXX */ #define MAXPHYS (64 * 1024) /* max raw I/O transfer size */ #define CLSIZE 1 #define CLSIZELOG2 0 /* NOTE: SSIZE, SINCR and UPAGES must be multiples of CLSIZE */ #define SSIZE 1 /* initial stack size/NBPG */ #define SINCR 1 /* increment of stack/NBPG */ #define USPACE ctob(UPAGES) #define UPAGES 3 /* pages of u-area */ #define UADDR 0xFFEE0000 /* address of u */ #define UVPN (UADDR>>PGSHIFT)/* virtual page number of u */ #define KERNELSTACK (UADDR+UPAGES*NBPG) /* top of kernel stack */ /* * Constants related to network buffer management. * MCLBYTES must be no larger than CLBYTES (the software page size), and, * on machines that exchange pages of input or output buffers with mbuf * clusters (MAPPED_MBUFS), MCLBYTES must also be an integral multiple * of the hardware page size. */ #define MSIZE 128 /* size of an mbuf */ #define MCLSHIFT 11 #define MCLBYTES (1 << MCLSHIFT) #define MCLOFSET (MCLBYTES - 1) #ifndef NMBCLUSTERS #ifdef GATEWAY #define NMBCLUSTERS 512 /* map size, max cluster allocation */ #else #define NMBCLUSTERS 256 /* map size, max cluster allocation */ #endif #endif /* * Size of kernel malloc arena in CLBYTES-sized logical pages */ #ifndef NKMEMCLUSTERS #define NKMEMCLUSTERS (3072*1024/CLBYTES) #endif #define MAXPARTITIONS 16 /* pages ("clicks") to disk blocks */ #define ctod(x) ((x)<<(PGSHIFT-DEV_BSHIFT)) #define dtoc(x) ((x)>>(PGSHIFT-DEV_BSHIFT)) #define dtob(x) ((x)<>PGSHIFT) #define btodb(bytes) /* calculates (bytes / DEV_BSIZE) */ \ ((unsigned)(bytes) >> DEV_BSHIFT) #define dbtob(db) /* calculates (db * DEV_BSIZE) */ \ ((unsigned)(db) << DEV_BSHIFT) /* * Map a ``block device block'' to a file system block. * This should be device dependent, and should use the bsize * field from the disk label. * For now though just use DEV_BSIZE. */ #define bdbtofsb(bn) ((bn) / (BLKDEV_IOSIZE/DEV_BSIZE)) #include #ifdef JUNK /* * Mach derived conversion macros */ #define m88k_round_seg(x) ((((unsigned)(x)) + NBSEG - 1) & ~(NBSEG-1)) #define m88k_trunc_seg(x) ((unsigned)(x) & ~(NBSEG-1)) #define m88k_round_page(x) ((((unsigned)(x)) + NBPG - 1) & ~(NBPG-1)) #define m88k_trunc_page(x) ((unsigned)(x) & ~(NBPG-1)) #define m88k_btos(x) ((unsigned)(x) >> SEGSHIFT) #define m88k_stob(x) ((unsigned)(x) << SEGSHIFT) #define m88k_btop(x) ((unsigned)(x) >> PGSHIFT) #define m88k_ptob(x) ((unsigned)(x) << PGSHIFT) /* * spl functions; all but spl0 are done in-line */ #include #define _debug_spl(s) \ ({ \ register int _spl_r; \ \ asm __volatile ("clrl %0; movew sr,%0; movew %1,sr" : \ "&=d" (_spl_r) : "di" (s)); \ if ((_spl_r&PSL_IPL) > (s&PSL_IPL)) \ printf ("%s:%d:spl(%d) ==> spl(%d)!!\n",__FILE__,__LINE__, \ ((PSL_IPL&_spl_r)>>8), ((PSL_IPL&s)>>8)); \ _spl_r; \ }) #define _spl_no_check(s) \ ({ \ register int _spl_r; \ \ asm __volatile ("clrl %0; movew sr,%0; movew %1,sr" : \ "&=d" (_spl_r) : "di" (s)); \ _spl_r; \ }) #if defined (DEBUG) #define _spl _debug_spl #else #define _spl _spl_no_check #endif /* spl0 requires checking for software interrupts */ #define spl1() _spl(PSL_S|PSL_IPL1) #define spl2() _spl(PSL_S|PSL_IPL2) #define spl3() _spl(PSL_S|PSL_IPL3) #define spl4() _spl(PSL_S|PSL_IPL4) #define spl5() _spl(PSL_S|PSL_IPL5) #define spl6() _spl(PSL_S|PSL_IPL6) #define spl7() _spl(PSL_S|PSL_IPL7) #define splnone() spl0() #define splsoftclock() spl1() #define splnet() spl1() #define splbio() spl3() #define splimp() spl3() #define spltty() spl4() #define splclock() spl6() #define splstatclock() spl6() #define splvm() spl6() #define splhigh() spl7() #define splsched() spl7() #endif /* JUNK */ #ifdef _KERNEL #define DELAY(x) delay(x) #endif #endif /* !_MACHINE_PARAM_H_ */