/* $NetBSD: dc.c,v 1.30 1996/10/16 02:10:33 jonathan Exp $ */ /*- * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Ralph Campbell and Rick Macklem. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)dc.c 8.5 (Berkeley) 6/2/95 */ /* * devDC7085.c -- * * This file contains machine-dependent routines that handle the * output queue for the serial lines. * * Copyright (C) 1989 Digital Equipment Corporation. * Permission to use, copy, modify, and distribute this software and * its documentation for any purpose and without fee is hereby granted, * provided that the above copyright notice appears in all copies. * Digital Equipment Corporation makes no representations about the * suitability of this software for any purpose. It is provided "as is" * without express or implied warranty. * * from: Header: /sprite/src/kernel/dev/ds3100.md/RCS/devDC7085.c, * v 1.4 89/08/29 11:55:30 nelson Exp SPRITE (DECWRL)"; */ /* * DC7085 (DZ-11 look alike) Driver */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * XXX in dcvar.h or not? * #include */ #include "dcvar.h" #include "tc.h" #include /* XXX KbdReset band friends */ #include #include extern struct cfdriver mainbus_cd; #define DCUNIT(dev) (minor(dev) >> 2) #define DCLINE(dev) (minor(dev) & 3) /* * Autoconfiguration data for config. * * Use the statically-allocated softc until old autoconfig code and * config.old are completely gone. */ int old_dcmatch __P((struct device * parent, void *cfdata, void *aux)); void old_dcattach __P((struct device *parent, struct device *self, void *aux)); extern struct cfdriver dz_cd; struct cfdriver dz_cd = { NULL, "dz", DV_TTY }; /* * Forward declarations */ struct tty *dctty __P((dev_t dev)); void dcstart __P((struct tty *)); void dcrint __P((struct dc_softc *sc)); void dcxint __P((struct tty *)); int dcmctl __P((dev_t dev, int bits, int how)); void dcscan __P((void *)); int dcparam __P((struct tty *tp, struct termios *t)); static int cold_dcparam __P((struct tty *tp, struct termios *t, dcregs *dcaddr, int allow_19200)); extern void ttrstrt __P((void *)); void dc_reset __P ((dcregs *dcaddr)); /* console I/O */ int dcGetc __P((dev_t)); void dcPutc __P((dev_t, int)); void dcPollc __P((dev_t, int)); void dc_consinit __P((dev_t dev, dcregs *dcaddr)); /* QVSS-compatible in-kernel X input event parser, pointer tracker */ void (*dcDivertXInput) __P((int cc)); /* X windows keyboard input routine */ void (*dcMouseEvent) __P((int)); /* X windows mouse motion event routine */ void (*dcMouseButtons) __P((int)); /* X windows mouse buttons event routine */ #ifdef DEBUG int debugChar; #endif /* * The DC7085 doesn't interrupt on carrier transitions, so * we have to use a timer to watch it. */ int dc_timer; /* true if timer started */ /* * Pdma structures for fast output code */ struct speedtab dcspeedtab[] = { { 0, 0, }, { 50, LPR_B50 }, { 75, LPR_B75 }, { 110, LPR_B110 }, { 134, LPR_B134 }, { 150, LPR_B150 }, { 300, LPR_B300 }, { 600, LPR_B600 }, { 1200, LPR_B1200 }, { 1800, LPR_B1800 }, { 2400, LPR_B2400 }, { 4800, LPR_B4800 }, { 9600, LPR_B9600 }, { 19200,LPR_B19200 }, #ifdef notyet { 19200,LPR_B38400 }, /* Overloaded with 19200, per chip. */ #endif { -1, -1 } }; #ifndef PORTSELECTOR #define ISPEED TTYDEF_SPEED #define LFLAG TTYDEF_LFLAG #else #define ISPEED B4800 #define LFLAG (TTYDEF_LFLAG & ~ECHO) #endif /* * Console line variables, for use when cold */ extern int cold; dcregs *dc_cons_addr = 0; /* * Is there a framebuffer console device using this serial driver? * XXX used for ugly special-cased console input that should be redone * more cleanly. */ static inline int raster_console __P((void)); static inline int raster_console() { return (cn_tab->cn_pri == CN_INTERNAL || cn_tab->cn_pri == CN_NORMAL); } /* XXX move back into dc_consinit when debugged */ static struct consdev dccons = { NULL, NULL, dcGetc, dcPutc, dcPollc, NODEV, CN_REMOTE }; /* * Special-case code to attach a console. * We were using PROM callbacks for console I/O, * and we just reset the chip under the console. * wire up this driver as console ASAP. * * Must be called at spltty() or higher. */ void dc_consinit(dev, dcaddr) dev_t dev; register dcregs *dcaddr; { struct termios cterm; struct tty ctty; /* save address in case we're cold */ if (cold && dc_cons_addr == 0) dc_cons_addr = dcaddr; /* reset chip */ dc_reset(dcaddr); dcaddr->dc_lpr = LPR_RXENAB | LPR_8_BIT_CHAR | LPR_B9600 | DCLINE(dev); wbflush(); DELAY(10); bzero(&cterm, sizeof(cterm)); bzero(&ctty, sizeof(ctty)); ctty.t_dev = dev; dccons.cn_dev = dev; cterm.c_cflag |= CLOCAL; cterm.c_cflag = CS8; cterm.c_ospeed = 9600; *cn_tab = dccons; cold_dcparam(&ctty, &cterm, dcaddr, 0); /* XXX untested */ } /* * Attach DC7085 (dz-11) device. */ int dcattach(sc, addr, dtr_mask, rtscts_mask, speed, console_line) register struct dc_softc *sc; void *addr; int dtr_mask, rtscts_mask, speed, console_line; { register dcregs *dcaddr; register struct pdma *pdp; register struct tty *tp; register int line; int s; dcaddr = (dcregs *)addr; /* * For a remote console, wait a while for previous output to * complete. * XXX both cn_dev == 0 and cn_pri == CN_DEAD are bug workarounds. * The interface between ttys and cpu_cons.c should be reworked. */ if (sc->sc_dv.dv_unit == 0 && /* XXX why only unit 0? */ (major(cn_tab->cn_dev) == DCDEV || major(cn_tab->cn_dev) == 0) && (cn_tab->cn_pri == CN_REMOTE || (cn_tab->cn_pri == CN_DEAD))) { DELAY(10000); } /* reset chip and enable interrupts */ dc_reset(dcaddr); dcaddr->dc_csr |= (CSR_MSE | CSR_TIE | CSR_RIE); /* init pseudo DMA structures */ pdp = &sc->dc_pdma[0]; for (line = 0; line < 4; line++) { pdp->p_addr = (void *)dcaddr; tp = sc->dc_tty[line] = ttymalloc(); if (line != DCKBD_PORT && line != DCMOUSE_PORT) tty_attach(tp); tp->t_dev = makedev(DCDEV, 4 * sc->sc_dv.dv_unit + line); pdp->p_arg = (int) tp; pdp->p_fcn = dcxint; pdp++; } sc->dcsoftCAR = sc->sc_dv.dv_cfdata->cf_flags | 0xB; if (dc_timer == 0) { dc_timer = 1; timeout(dcscan, (void *)0, hz); } sc->dc_19200 = speed; sc->dc_modem = dtr_mask; sc->dc_rtscts = rtscts_mask; /* * Special handling for consoles. */ if (sc->sc_dv.dv_unit == 0) { if (raster_console()) { s = spltty(); dcaddr->dc_lpr = LPR_RXENAB | LPR_8_BIT_CHAR | LPR_B4800 | DCKBD_PORT; wbflush(); dcaddr->dc_lpr = LPR_RXENAB | LPR_B4800 | LPR_OPAR | LPR_PARENB | LPR_8_BIT_CHAR | DCMOUSE_PORT; wbflush(); DELAY(1000); KBDReset(makedev(DCDEV, DCKBD_PORT), dcPutc); MouseInit(makedev(DCDEV, DCMOUSE_PORT), dcPutc, dcGetc); splx(s); } else if (major(cn_tab->cn_dev) == DCDEV) { s = spltty(); dc_consinit(cn_tab->cn_dev, dcaddr); dcaddr->dc_csr |= (CSR_MSE | CSR_TIE | CSR_RIE); splx(s); } } return (1); } /* * Reset chip. Does not change modem control output bits * or modem state register. * Does not enable interrupts; caller must explicitly or * TIE and RIE on if desired (XXX not true yet) */ void dc_reset(dcaddr) register dcregs *dcaddr; { /* Reset CSR and wait until cleared. */ dcaddr->dc_csr = CSR_CLR; wbflush(); DELAY(10); while (dcaddr->dc_csr & CSR_CLR) ; /* Enable scanner. */ dcaddr->dc_csr = CSR_MSE; wbflush(); DELAY(10); } int dcopen(dev, flag, mode, p) dev_t dev; int flag, mode; struct proc *p; { register struct tty *tp; register struct dc_softc *sc; register int unit, line; int s, error = 0; unit = DCUNIT(dev); line = DCLINE(dev); if (unit >= dz_cd.cd_ndevs || line > 4) return (ENXIO); sc = dz_cd.cd_devs[unit]; if (sc->dc_pdma[line].p_addr == (void *)0) return (ENXIO); tp = sc->dc_tty[line]; if (tp == NULL) { tp = sc->dc_tty[line] = ttymalloc(); tty_attach(tp); } tp->t_oproc = dcstart; tp->t_param = dcparam; tp->t_dev = dev; if ((tp->t_state & TS_ISOPEN) == 0) { tp->t_state |= TS_WOPEN; ttychars(tp); #ifndef PORTSELECTOR if (tp->t_ispeed == 0) { #endif tp->t_iflag = TTYDEF_IFLAG; tp->t_oflag = TTYDEF_OFLAG; tp->t_cflag = TTYDEF_CFLAG; tp->t_lflag = LFLAG; tp->t_ispeed = tp->t_ospeed = ISPEED; #ifdef PORTSELECTOR tp->t_cflag |= HUPCL; #else } #endif (void) dcparam(tp, &tp->t_termios); ttsetwater(tp); } else if ((tp->t_state & TS_XCLUDE) && curproc->p_ucred->cr_uid != 0) return (EBUSY); #ifdef HW_FLOW_CONTROL (void) dcmctl(dev, DML_DTR | DML_RTS, DMSET); #else (void) dcmctl(dev, DML_DTR, DMSET); #endif if ((sc->dcsoftCAR & (1 << line)) || (dcmctl(dev, 0, DMGET) & DML_CAR)) tp->t_state |= TS_CARR_ON; s = spltty(); while (!(flag & O_NONBLOCK) && !(tp->t_cflag & CLOCAL) && !(tp->t_state & TS_CARR_ON)) { tp->t_state |= TS_WOPEN; if ((error = ttysleep(tp, (caddr_t)&tp->t_rawq, TTIPRI | PCATCH, ttopen, 0)) != 0) break; } splx(s); if (error) return (error); return ((*linesw[tp->t_line].l_open)(dev, tp)); } /*ARGSUSED*/ int dcclose(dev, flag, mode, p) dev_t dev; int flag, mode; struct proc *p; { register struct dc_softc *sc; register struct tty *tp; register int line, bit; int s; sc = dz_cd.cd_devs[DCUNIT(dev)]; line = DCLINE(dev); tp = sc->dc_tty[line]; bit = 1 << (line + 8); s = spltty(); /* turn off the break bit if it is set */ if (sc->dc_brk & bit) { sc->dc_brk &= ~bit; ttyoutput(0, tp); } splx(s); (*linesw[tp->t_line].l_close)(tp, flag); if ((tp->t_cflag & HUPCL) || (tp->t_state & TS_WOPEN) || !(tp->t_state & TS_ISOPEN)) (void) dcmctl(dev, 0, DMSET); return (ttyclose(tp)); } int dcread(dev, uio, flag) dev_t dev; struct uio *uio; { register struct dc_softc *sc; register struct tty *tp; sc = dz_cd.cd_devs[DCUNIT(dev)]; tp = sc->dc_tty[DCLINE(dev)]; #ifdef HW_FLOW_CONTROL if ((tp->t_cflag & CRTS_IFLOW) && (tp->t_state & TS_TBLOCK) && tp->t_rawq.c_cc < TTYHOG/5) { tp->t_state &= ~TS_TBLOCK; (void) dcmctl(dev, DML_RTS, DMBIS); } #endif /* HW_FLOW_CONTROL */ return ((*linesw[tp->t_line].l_read)(tp, uio, flag)); } int dcwrite(dev, uio, flag) dev_t dev; struct uio *uio; { register struct dc_softc *sc; register struct tty *tp; sc = dz_cd.cd_devs[DCUNIT(dev)]; tp = sc->dc_tty[DCLINE(dev)]; return ((*linesw[tp->t_line].l_write)(tp, uio, flag)); } struct tty * dctty(dev) dev_t dev; { register struct dc_softc *sc; register struct tty *tp; sc = dz_cd.cd_devs[DCUNIT(dev)]; tp = sc->dc_tty[DCLINE(dev)]; return (tp); } /*ARGSUSED*/ int dcioctl(dev, cmd, data, flag, p) dev_t dev; u_long cmd; caddr_t data; int flag; struct proc *p; { register struct dc_softc *sc; register struct tty *tp; register int unit; register int line; int error; unit = DCUNIT(dev); line = DCLINE(dev); sc = dz_cd.cd_devs[unit]; tp = sc->dc_tty[line]; error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p); if (error >= 0) return (error); error = ttioctl(tp, cmd, data, flag, p); if (error >= 0) return (error); switch (cmd) { case TIOCSBRK: sc->dc_brk |= 1 << (line + 8); ttyoutput(0, tp); break; case TIOCCBRK: sc->dc_brk &= ~(1 << (line + 8)); ttyoutput(0, tp); break; case TIOCSDTR: (void) dcmctl(dev, DML_DTR|DML_RTS, DMBIS); break; case TIOCCDTR: (void) dcmctl(dev, DML_DTR|DML_RTS, DMBIC); break; case TIOCMSET: (void) dcmctl(dev, *(int *)data, DMSET); break; case TIOCMBIS: (void) dcmctl(dev, *(int *)data, DMBIS); break; case TIOCMBIC: (void) dcmctl(dev, *(int *)data, DMBIC); break; case TIOCMGET: *(int *)data = dcmctl(dev, 0, DMGET); break; default: return (ENOTTY); } return (0); } /* * Set line parameters */ int dcparam(tp, t) register struct tty *tp; register struct termios *t; { register struct dc_softc *sc; register dcregs *dcaddr; /* * Extract softc data, and pass entire request onto * cold_dcparam() for argument checking and execution. */ sc = dz_cd.cd_devs[DCUNIT(tp->t_dev)]; dcaddr = (dcregs *)sc->dc_pdma[0].p_addr; return (cold_dcparam(tp, t, dcaddr, sc->dc_19200)); } int cold_dcparam(tp, t, dcaddr, allow_19200) register struct tty *tp; register struct termios *t; register dcregs *dcaddr; int allow_19200; { register int lpr; register int cflag = t->c_cflag; int unit = minor(tp->t_dev); int ospeed = ttspeedtab(t->c_ospeed, dcspeedtab); int s; int line; line = DCLINE(tp->t_dev); /* check requested parameters */ if (ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed) || (cflag & CSIZE) == CS5 || (cflag & CSIZE) == CS6 || (t->c_ospeed >= 19200 && allow_19200 != 1)) return (EINVAL); /* and copy to tty */ tp->t_ispeed = t->c_ispeed; tp->t_ospeed = t->c_ospeed; tp->t_cflag = cflag; /* * Handle console cases specially. */ if (raster_console()) { if (unit == DCKBD_PORT) { lpr = LPR_RXENAB | LPR_8_BIT_CHAR | LPR_B4800 | DCKBD_PORT; goto out; } else if (unit == DCMOUSE_PORT) { lpr = LPR_RXENAB | LPR_B4800 | LPR_OPAR | LPR_PARENB | LPR_8_BIT_CHAR | DCMOUSE_PORT; goto out; } } else if (tp->t_dev == cn_tab->cn_dev) { lpr = LPR_RXENAB | LPR_8_BIT_CHAR | LPR_B9600 | line; goto out; } if (ospeed == 0) { (void) dcmctl(unit, 0, DMSET); /* hang up line */ return (0); } lpr = LPR_RXENAB | ospeed | line; if ((cflag & CSIZE) == CS7) lpr |= LPR_7_BIT_CHAR; else lpr |= LPR_8_BIT_CHAR; if (cflag & PARENB) lpr |= LPR_PARENB; if (cflag & PARODD) lpr |= LPR_OPAR; if (cflag & CSTOPB) lpr |= LPR_2_STOP; out: s = spltty(); dcaddr->dc_lpr = lpr; wbflush(); splx(s); DELAY(10); return (0); } /* * Check for interrupts from all devices. */ int dcintr(xxxunit) void *xxxunit; { register struct dc_softc *sc = xxxunit; register dcregs *dcaddr; register unsigned csr; dcaddr = (dcregs *)sc->dc_pdma[0].p_addr; while ((csr = dcaddr->dc_csr) & (CSR_RDONE | CSR_TRDY)) { if (csr & CSR_RDONE) dcrint(sc); if (csr & CSR_TRDY) dcxint(sc->dc_tty[((csr >> 8) & 03)]); } /* XXX check for spurious interrupts */ return 0; } void dcrint(sc) register struct dc_softc * sc; { register dcregs *dcaddr; register struct tty *tp; register int c, cc; int overrun = 0; register struct tty **dc_tty; dc_tty = ((struct dc_softc*)dz_cd.cd_devs[0])->dc_tty; /* XXX */ dcaddr = (dcregs *)sc->dc_pdma[0].p_addr; /*XXX*/ while ((c = dcaddr->dc_rbuf) < 0) { /* char present */ cc = c & 0xff; tp = sc->dc_tty[((c >> 8) & 03)]; if ((c & RBUF_OERR) && overrun == 0) { log(LOG_WARNING, "%s,%d: silo overflow\n", sc->sc_dv.dv_xname, (c >> 8) & 03); overrun = 1; } /* the keyboard requires special translation */ if (raster_console() && tp == dc_tty[DCKBD_PORT]) { #ifdef KADB if (cc == LK_DO) { spl0(); kdbpanic(); return; } #endif #ifdef DEBUG debugChar = cc; #endif if (dcDivertXInput) { (*dcDivertXInput)(cc); return; } if ((cc = kbdMapChar(cc)) < 0) return; } else if (tp == dc_tty[DCMOUSE_PORT] && dcMouseButtons) { mouseInput(cc); return; } if (!(tp->t_state & TS_ISOPEN)) { wakeup((caddr_t)&tp->t_rawq); #ifdef PORTSELECTOR if (!(tp->t_state & TS_WOPEN)) #endif return; } if (c & RBUF_FERR) cc |= TTY_FE; if (c & RBUF_PERR) cc |= TTY_PE; #ifdef HW_FLOW_CONTROL if ((tp->t_cflag & CRTS_IFLOW) && !(tp->t_state & TS_TBLOCK) && tp->t_rawq.c_cc + tp->t_canq.c_cc >= TTYHOG) { tp->t_state &= ~TS_TBLOCK; (void) dcmctl(tp->t_dev, DML_RTS, DMBIC); } #endif /* HWW_FLOW_CONTROL */ (*linesw[tp->t_line].l_rint)(cc, tp); } DELAY(10); } void dcxint(tp) register struct tty *tp; { register struct dc_softc *sc; register struct pdma *dp; register dcregs *dcaddr; int line, linemask; sc = dz_cd.cd_devs[DCUNIT(tp->t_dev)]; /* XXX */ line = DCLINE(tp->t_dev); linemask = 1 << line; dp = &sc->dc_pdma[line]; if (dp->p_mem < dp->p_end) { dcaddr = (dcregs *)dp->p_addr; #ifdef HW_FLOW_CONTROL /* check for hardware flow control of output */ if ((tp->t_cflag & CCTS_OFLOW) && (sc->dc_rtscts & linemask)) { switch (line) { case 2: if (dcaddr->dc_msr & MSR_CTS2) break; goto stop; case 3: if (dcaddr->dc_msr & MSR_CTS3) break; stop: tp->t_state &= ~TS_BUSY; tp->t_state |= TS_TTSTOP; ndflush(&tp->t_outq, dp->p_mem - (caddr_t)tp->t_outq.c_cf); dp->p_end = dp->p_mem = tp->t_outq.c_cf; dcaddr->dc_tcr &= ~(1 << line); wbflush(); DELAY(10); return; } } #endif /* HW_FLOW_CONTROL */ dcaddr->dc_tdr = sc->dc_brk | *(u_char *)dp->p_mem; dp->p_mem++; wbflush(); DELAY(10); return; } tp->t_state &= ~TS_BUSY; if (tp->t_state & TS_FLUSH) tp->t_state &= ~TS_FLUSH; else { ndflush(&tp->t_outq, dp->p_mem - (caddr_t) tp->t_outq.c_cf); dp->p_end = dp->p_mem = tp->t_outq.c_cf; } if (tp->t_line) (*linesw[tp->t_line].l_start)(tp); else dcstart(tp); if (tp->t_outq.c_cc == 0 || !(tp->t_state & TS_BUSY)) { dcaddr = (dcregs *)dp->p_addr; dcaddr->dc_tcr &= ~(1 << line); wbflush(); DELAY(10); } } void dcstart(tp) register struct tty *tp; { register struct dc_softc *sc; register struct pdma *dp; register dcregs *dcaddr; register int cc; int line, s; sc = dz_cd.cd_devs[DCUNIT(tp->t_dev)]; line = DCLINE(tp->t_dev); dp = &sc->dc_pdma[line]; dcaddr = (dcregs *)dp->p_addr; s = spltty(); if (tp->t_state & (TS_TIMEOUT|TS_BUSY|TS_TTSTOP)) goto out; if (tp->t_outq.c_cc <= tp->t_lowat) { if (tp->t_state & TS_ASLEEP) { tp->t_state &= ~TS_ASLEEP; wakeup((caddr_t)&tp->t_outq); } selwakeup(&tp->t_wsel); } if (tp->t_outq.c_cc == 0) goto out; /* handle console specially */ if (raster_console() && tp == sc->dc_tty[DCKBD_PORT]) { while (tp->t_outq.c_cc > 0) { cc = getc(&tp->t_outq) & 0x7f; cnputc(cc); } /* * After we flush the output queue we may need to wake * up the process that made the output. */ if (tp->t_outq.c_cc <= tp->t_lowat) { if (tp->t_state & TS_ASLEEP) { tp->t_state &= ~TS_ASLEEP; wakeup((caddr_t)&tp->t_outq); } selwakeup(&tp->t_wsel); } goto out; } cc = ndqb(&tp->t_outq, 0); if (cc == 0) goto out; tp->t_state |= TS_BUSY; dp->p_end = dp->p_mem = tp->t_outq.c_cf; dp->p_end += cc; dcaddr->dc_tcr |= 1 << line; wbflush(); out: splx(s); } /* * Stop output on a line. */ /*ARGSUSED*/ int /* was void TTTTT */ dcstop(tp, flag) register struct tty *tp; { register struct dc_softc *sc; register struct pdma *dp; register int s; sc = dz_cd.cd_devs[DCUNIT(tp->t_dev)]; dp = &sc->dc_pdma[DCLINE(tp->t_dev)]; s = spltty(); if (tp->t_state & TS_BUSY) { dp->p_end = dp->p_mem; if (!(tp->t_state & TS_TTSTOP)) tp->t_state |= TS_FLUSH; } splx(s); } int dcmctl(dev, bits, how) dev_t dev; int bits, how; { register struct dc_softc *sc; register dcregs *dcaddr; register int line, mbits; int b, s; register int tcr, msr; line = DCLINE(dev); sc = dz_cd.cd_devs[DCUNIT(dev)]; b = 1 << line; dcaddr = (dcregs *)sc->dc_pdma[line].p_addr; s = spltty(); /* only channel 2 has modem control on a DECstation 2100/3100 */ mbits = DML_DTR | DML_DSR | DML_CAR; #ifdef HW_FLOW_CONTROL mbits != DML_RTS; #endif /* HW_FLOW_CONTROL */ switch (line) { case 2: /* pmax partial-modem comms port, full-modem port on 3max */ mbits = 0; tcr = dcaddr->dc_tcr; if (tcr & TCR_DTR2) mbits |= DML_DTR; if ((sc->dc_rtscts & (1<dc_msr; if (msr & MSR_CD2) mbits |= DML_CAR; if (msr & MSR_DSR2) { /* * XXX really tests for DS_PMAX instead of DS_3MAX * but close enough for now. Vaxes? */ if ((sc->dc_rtscts & (1 << line )) == 0 && (sc->dc_modem & (1 << line ))) mbits |= DML_CAR | DML_DSR; else mbits |= DML_DSR; } break; case 3: /* no modem control on pmax, console port on 3max */ /* * XXX really tests for DS_3MAX instead of DS_PMAX * but close enough for now. Vaxes? */ if ( sc->dc_modem & (1 << line )) { mbits = 0; tcr = dcaddr->dc_tcr; if (tcr & TCR_DTR3) mbits |= DML_DTR; #ifdef HW_FLOW_CONTROL /* XXX OK for get, but not for set? */ /*if ( sc->dc_rtscts & (1 << line ))*/ if (tcr & TCR_RTS3) mbits |= DML_RTS; #endif /*HW_FLOW_CONTROL*/ msr = dcaddr->dc_msr; if (msr & MSR_CD3) mbits |= DML_CAR; if (msr & MSR_DSR3) mbits |= DML_DSR; } } switch (how) { case DMSET: mbits = bits; break; case DMBIS: mbits |= bits; break; case DMBIC: mbits &= ~bits; break; case DMGET: (void) splx(s); return (mbits); } switch (line) { case 2: /* 2 */ tcr = dcaddr->dc_tcr; if (mbits & DML_DTR) tcr |= TCR_DTR2; else tcr &= ~TCR_DTR2; /*if (pmax_boardtype != DS_PMAX)*/ if (sc->dc_rtscts & (1 << line)) { if (mbits & DML_RTS) tcr |= TCR_RTS2; else tcr &= ~TCR_RTS2; } dcaddr->dc_tcr = tcr; break; case 3: /* XXX DTR not supported on this line on 2100/3100 */ /*if (pmax_boardtype != DS_PMAX)*/ if (sc->dc_modem & (1 << line)) { tcr = dcaddr->dc_tcr; if (mbits & DML_DTR) tcr |= TCR_DTR3; else tcr &= ~TCR_DTR3; #ifdef HW_FLOW_CONTROL /*if (sc->dc_rtscts & (1 << line))*/ if (mbits & DML_RTS) tcr |= TCR_RTS3; else tcr &= ~TCR_RTS3; #endif /* HW_FLOW_CONTROL */ dcaddr->dc_tcr = tcr; } } (void) splx(s); return (mbits); } /* * This is called by timeout() periodically. * Check to see if modem status bits have changed. */ void dcscan(arg) void *arg; { register struct dc_softc *sc = dz_cd.cd_devs[0]; /* XXX */ register dcregs *dcaddr; register struct tty *tp; register int unit, limit, dtr, dsr; int s; /* only channel 2 has modem control on a DECstation 2100/3100 */ dtr = TCR_DTR2; dsr = MSR_DSR2; #ifdef HW_FLOW_CONTROL /*limit = (pmax_boardtype == DS_PMAX) ? 2 : 3;*/ limit = (sc->dc_rtscts & (1 << 3)) ? 3 : 2; /*XXX*/ #else limit = 2; #endif s = spltty(); for (unit = 2; unit <= limit; unit++, dtr >>= 2, dsr >>= 8) { tp = sc->dc_tty[unit]; dcaddr = (dcregs *)sc->dc_pdma[unit].p_addr; if ((dcaddr->dc_msr & dsr) || (sc->dcsoftCAR & (1 << unit))) { /* carrier present */ if (!(tp->t_state & TS_CARR_ON)) (void)(*linesw[tp->t_line].l_modem)(tp, 1); } else if ((tp->t_state & TS_CARR_ON) && (*linesw[tp->t_line].l_modem)(tp, 0) == 0) dcaddr->dc_tcr &= ~dtr; #ifdef HW_FLOW_CONTROL /* * If we are using hardware flow control and output is stopped, * then resume transmit. */ if ((tp->t_cflag & CCTS_OFLOW) && (tp->t_state & TS_TTSTOP) && /*pmax_boardtype != DS_PMAX*/ (sc->dc_rtscts & (1 << unit)) ) { switch (unit) { case 2: if (dcaddr->dc_msr & MSR_CTS2) break; continue; case 3: if (dcaddr->dc_msr & MSR_CTS3) break; continue; } tp->t_state &= ~TS_TTSTOP; dcstart(tp); } #endif /* HW_FLOW_CONTROL */ } splx(s); timeout(dcscan, (void *)0, hz); } /* * ---------------------------------------------------------------------------- * * dcGetc -- * * Read a character from a serial line. * * Results: * A character read from the serial port. * * Side effects: * None. * * ---------------------------------------------------------------------------- */ int dcGetc(dev) dev_t dev; { register dcregs *dcaddr; register int c; register int line; int s; line = DCLINE(dev); if (cold && dc_cons_addr) { dcaddr = dc_cons_addr; } else { struct dc_softc *sc; sc = dz_cd.cd_devs[DCUNIT(dev)]; dcaddr = (dcregs *)sc->dc_pdma[line].p_addr; } if (!dcaddr) return (0); s = spltty(); for (;;) { if (!(dcaddr->dc_csr & CSR_RDONE)) continue; c = dcaddr->dc_rbuf; DELAY(10); if (((c >> 8) & 03) == line) break; } splx(s); return (c & 0xff); } /* * Send a char on a port, non interrupt driven. */ void dcPutc(dev, c) dev_t dev; int c; { register dcregs *dcaddr; register u_short tcr; register int timeout; int s, out_line, activeline; int brk; s = spltty(); out_line = DCLINE(dev); if (cold && dc_cons_addr) { brk = 0; dcaddr = dc_cons_addr; } else { struct dc_softc *sc; sc = dz_cd.cd_devs[DCUNIT(dev)]; dcaddr = (dcregs *)sc->dc_pdma[out_line].p_addr; brk = sc->dc_brk; } tcr = dcaddr->dc_tcr; dcaddr->dc_tcr = tcr | (1 << out_line); wbflush(); DELAY(10); while (1) { /* * Wait for transmitter to be not busy. */ timeout = 1000000; while (!(dcaddr->dc_csr & CSR_TRDY) && timeout > 0) timeout--; if (timeout == 0) { printf("dcPutc: timeout waiting for CSR_TRDY\n"); break; } activeline = (dcaddr->dc_csr >> 8) & 3; /* * Check to be sure its the right port. */ if (activeline != out_line) { tcr |= 1 << activeline; dcaddr->dc_tcr &= ~(1 << out_line); wbflush(); DELAY(10); continue; } /* * Start sending the character. */ dcaddr->dc_tdr = brk | (c & 0xff); wbflush(); DELAY(10); /* * Wait for character to be sent. */ while (1) { /* * cc -O bug: this code produces and infinite loop! * while (!(dcaddr->dc_csr & CSR_TRDY)) * ; */ timeout = 1000000; while (!(dcaddr->dc_csr & CSR_TRDY) && timeout > 0) timeout--; activeline = (dcaddr->dc_csr >> 8) & 3; if (activeline != out_line) { tcr |= 1 << activeline; dcaddr->dc_tcr &= ~(1 << activeline); wbflush(); DELAY(10); continue; } dcaddr->dc_tcr &= ~(1 << out_line); wbflush(); DELAY(10); break; } break; } /* * Enable interrupts for other lines which became ready. */ if (tcr & 0xF) { dcaddr->dc_tcr = tcr; wbflush(); DELAY(10); } splx(s); } /* * Enable/disable polling mode */ void dcPollc(dev, on) dev_t dev; int on; { #if defined(DIAGNOSTIC) || defined(DEBUG) printf("dc_Pollc(%d, %d): not implemented\n", minor(dev), on); #endif }