/* $OpenBSD: rz.c,v 1.15 1998/10/03 21:18:58 millert Exp $ */ /* $NetBSD: rz.c,v 1.38 1998/05/08 00:05:19 simonb Exp $ */ /* * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Van Jacobson of Lawrence Berkeley Laboratory and Ralph Campbell. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)rz.c 8.1 (Berkeley) 7/29/93 */ /* * SCSI CCS (Command Command Set) disk driver. * NOTE: The name was changed from "sd" to "rz" for DEC naming compatibility. * I guess I can't avoid confusion someplace. */ #include "rz.h" #if NRZ > 0 #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* XXX */ #include #include #include #include #include #include #include #include #include #define SDRETRIES 4 #define CDRETRIES 4 struct rz_softc; struct scsi_mode_sense_data; struct disk_parms; int rzprobe __P((void /*register struct pmax_scsi_device*/ *sd)); void rzgetdefaultlabel __P((struct rz_softc *, struct disklabel *lp)); void rzstart __P((int unit)); void rzdone __P((int unit, int error, int resid, int status)); void rzgetinfo __P((dev_t dev)); int rzsize __P((dev_t dev)); /* Machinery for format and drive inquiry commands. */ int rz_command __P((struct rz_softc *sc, struct scsi_generic *scsi_cmd, int cmdlen, u_char *data_addr, int data_len, int nretries, int timeout, struct buf *bp, u_int flags)); static int rz_mode_sense __P((struct rz_softc *sd, struct scsi_mode_sense_data *scsi_sense, int page, int pagelen, int flags)); static int rz_getsize __P((struct rz_softc *sc, int flags)); void rzgetgeom __P((struct rz_softc *, int flags)); void rz_setlabelgeom __P((struct disklabel *lp, struct disk_parms *dp)); u_long rz_cdsize __P((struct rz_softc *cd, int flags)); struct pmax_driver rzdriver = { "rz", rzprobe, (void (*) __P((struct ScsiCmd *cmd))) rzstart, rzdone, }; struct size { u_long strtblk; u_long nblocks; #define RZ_END ((u_long) -1) }; /* * Since the SCSI standard tends to hide the disk structure, we define * partitions in terms of DEV_BSIZE blocks. The default partition table * (for an unlabeled disk) reserves 8K for a boot area, has an 8 meg * root and 32 meg of swap. The rest of the space on the drive goes in * the G partition. As usual, the C partition covers the entire disk * (including the boot area). */ static struct size rzdefaultpart[MAXPARTITIONS] = { /* Start Size Partition */ { 0, 65536 }, /* A -- 32Mbyte root */ { 63356, 131072 }, /* B -- 64Mbyte swap */ { 0, RZ_END }, /* C -- entire disk */ { 196608, 16384 }, /* D -- 8meg for var or miniroots */ { 212992, 409600 }, /* E -- /usr */ { 622592, 409600 }, /* F -- /home, alternate /usr */ { 1032912, RZ_END }, /* G -- F to end of disk */ { 196608, RZ_END }, /* H -- B to end of disk */ { 0, 0 }, /* I */ { 0, 0 }, /* J */ { 0, 0 }, /* K */ { 0, 0 }, /* L */ { 0, 0 }, /* M */ { 0, 0 }, /* N */ { 0, 0 }, /* O */ { 0, 0 } /* P */ }; /* * Ultrix disklabel declarations */ #ifdef COMPAT_ULTRIX #include extern char * compat_label __P((dev_t dev, void (*strat) __P((struct buf *bp)), struct disklabel *lp, struct cpu_disklabel *osdep)); #endif /* COMPAT_ULTRIX */ struct rzstats { long rzresets; long rztransfers; long rzpartials; }; struct rz_softc { struct device sc_dev; /* new config glue */ struct pmax_scsi_device *sc_sd; /* physical unit info */ pid_t sc_format_pid; /* process using "format" mode */ short sc_flags; /* see below */ short sc_type; /* drive type from INQUIRY cmd */ u_int sc_blks; /* number of blocks on device */ int sc_blksize; /* device block size in bytes */ struct disk sc_dkdev; /* generic disk device info */ #define sc_label sc_dkdev.dk_label /* XXX compat */ #define sc_openpart sc_dkdev.dk_openmask /* XXX compat */ #define sc_bopenpart sc_dkdev.dk_bopenmask /* XXX compat */ #define sc_copenpart sc_dkdev.dk_copenmask /* XXX compat */ #define sc_bshift sc_dkdev.dk_blkshift /* XXX compat */ struct rzstats sc_stats; /* statisic counts */ struct buf sc_tab; /* queue of pending operations */ struct buf sc_buf; /* buf for doing I/O */ struct buf sc_errbuf; /* buf for doing REQUEST_SENSE */ struct ScsiCmd sc_cmd; /* command for controller */ ScsiGroup1Cmd sc_rwcmd; /* SCSI cmd if not in "format" mode */ struct scsi_fmt_cdb sc_cdb; /* SCSI cmd if in "format" mode */ struct scsi_fmt_sense sc_sense; /* sense data from last cmd */ struct disk_parms { u_char heads; /* number of heads */ u_short cyls; /* number of cylinders */ u_char sectors; /* number of sectors/track */ int blksize; /* number of bytes/sector */ u_long disksize; /* total number sectors */ } params; u_char sc_capbuf[128]; /* buffer for SCSI_READ_CAPACITY */ } rz_softc[NRZ]; /* sc_flags values */ #define RZF_ALIVE 0x0001 /* drive found and ready */ #define RZF_SENSEINPROGRESS 0x0002 /* REQUEST_SENSE command in progress */ #define RZF_ALTCMD 0x0004 /* alternate command in progress */ #define RZF_HAVELABEL 0x0008 /* valid label found on disk */ #define RZF_WLABEL 0x0010 /* label is writeable */ #define RZF_WAIT 0x0020 /* waiting for sc_tab to drain */ #define RZF_REMOVEABLE 0x0040 /* disk is removable */ #define RZF_TRYSYNC 0x0080 /* try synchronous operation */ #define RZF_NOERR 0x0100 /* don't print error messages */ #define RZF_FAKEGEOM 0x02000 /* couldn't get geometry */ #ifdef DEBUG #define RZB_ERROR 0x01 #define RZB_PARTIAL 0x02 #define RZB_PRLABEL 0x04 int rzdebug = RZB_ERROR; #endif #define b_cylin b_resid struct scsi_mode_sense_data { struct scsi_mode_header header; struct scsi_blk_desc blk_desc; union disk_pages pages; }; /* * Table of scsi commands users are allowed to access via "format" mode. * 0 means not legal. * 1 means legal. */ static char legal_cmds[256] = { /***** 0 1 2 3 4 5 6 7 8 9 A B C D E F */ /*00*/ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*10*/ 0, 0, 1, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, /*20*/ 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*30*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*40*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*50*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*60*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*70*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*80*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*90*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*a0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*b0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*c0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*d0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*e0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /*f0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; /* * Private forward declarations */ static int rzready __P((register struct rz_softc *sc)); static void rzlblkstrat __P((register struct buf *bp, register int bsize)); /* * Test to see if the unit is ready and if not, try to make it ready. * Also, find the drive capacity. */ static int rzready(sc) register struct rz_softc *sc; { register int tries; ScsiClass7Sense *sp; /* don't print SCSI errors */ sc->sc_flags |= RZF_NOERR; /* see if the device is ready */ for (tries = 10; ; ) { sc->sc_cdb.len = sizeof(ScsiGroup0Cmd); scsiGroup0Cmd(SCSI_TEST_UNIT_READY, sc->sc_rwcmd.unitNumber, 0, 0, (ScsiGroup0Cmd *)sc->sc_cdb.cdb); sc->sc_buf.b_flags = B_BUSY | B_PHYS | B_READ; sc->sc_buf.b_bcount = 0; sc->sc_buf.b_un.b_addr = (caddr_t)0; sc->sc_buf.b_actf = (struct buf *)0; sc->sc_tab.b_actf = &sc->sc_buf; sc->sc_cmd.cmd = sc->sc_cdb.cdb; sc->sc_cmd.cmdlen = sc->sc_cdb.len; sc->sc_cmd.buf = (caddr_t)0; sc->sc_cmd.buflen = 0; /* setup synchronous data transfers if the device supports it */ if (tries == 10 && (sc->sc_flags & RZF_TRYSYNC)) sc->sc_cmd.flags = SCSICMD_USE_SYNC; else sc->sc_cmd.flags = 0; disk_busy(&sc->sc_dkdev); /* XXX */ (*sc->sc_sd->sd_cdriver->d_start)(&sc->sc_cmd); if (!biowait(&sc->sc_buf)) break; if (--tries < 0) return (0); if (!(sc->sc_sense.status & SCSI_STATUS_CHECKCOND)) goto again; sp = (ScsiClass7Sense *)sc->sc_sense.sense; if (sp->error7 != 0x70) goto again; if (sp->key == SCSI_CLASS7_UNIT_ATTN && tries != 9) { /* drive recalibrating, give it a while */ DELAY(1000000); continue; } if (sp->key == SCSI_CLASS7_NOT_READY) { ScsiStartStopCmd *cp; /* try to spin-up disk with start/stop command */ sc->sc_cdb.len = sizeof(ScsiGroup0Cmd); cp = (ScsiStartStopCmd *)sc->sc_cdb.cdb; cp->command = SCSI_START_STOP; cp->unitNumber = sc->sc_rwcmd.unitNumber; cp->immed = 0; cp->loadEject = 0; cp->start = 1; cp->pad1 = 0; cp->pad2 = 0; cp->pad3 = 0; cp->pad4 = 0; cp->control = 0; sc->sc_buf.b_flags = B_BUSY | B_PHYS | B_READ; sc->sc_buf.b_bcount = 0; sc->sc_buf.b_un.b_addr = (caddr_t)0; sc->sc_buf.b_actf = (struct buf *)0; sc->sc_tab.b_actf = &sc->sc_buf; rzstart(sc->sc_cmd.unit); if (biowait(&sc->sc_buf)) return (0); continue; } again: DELAY(1000); } /* print SCSI errors */ sc->sc_flags &= ~RZF_NOERR; /* find out how big a disk this is; punt on error. */ if (rz_getsize(sc, 0) == 0) return 0; /* XXX perhaps move to rzprobe? */ rzgetgeom(sc, SCSI_SILENT); return (1); } int rz_getsize(sc, flags) struct rz_softc *sc; int flags; { register int i; if (sc->sc_type == SCSI_ROM_TYPE) { register int cdsize; cdsize = rz_cdsize(sc, flags); sc->params.disksize = cdsize; return (cdsize); } sc->sc_cdb.len = sizeof(ScsiGroup1Cmd); scsiGroup1Cmd(SCSI_READ_CAPACITY, sc->sc_rwcmd.unitNumber, 0, 0, (ScsiGroup1Cmd *)sc->sc_cdb.cdb); sc->sc_buf.b_flags = B_BUSY | B_PHYS | B_READ; sc->sc_buf.b_bcount = 8; /* XXX 8 was sizeof(sc->sc_capbuf). */ sc->sc_buf.b_un.b_addr = (caddr_t)sc->sc_capbuf; sc->sc_buf.b_actf = (struct buf *)0; sc->sc_tab.b_actf = &sc->sc_buf; sc->sc_flags |= RZF_ALTCMD; rzstart(sc->sc_cmd.unit); sc->sc_flags &= ~RZF_ALTCMD; if (biowait(&sc->sc_buf) || sc->sc_buf.b_resid != 0) return (0); sc->sc_blks = ((sc->sc_capbuf[0] << 24) | (sc->sc_capbuf[1] << 16) | (sc->sc_capbuf[2] << 8) | sc->sc_capbuf[3]) + 1; sc->sc_blksize = (sc->sc_capbuf[4] << 24) | (sc->sc_capbuf[5] << 16) | (sc->sc_capbuf[6] << 8) | sc->sc_capbuf[7]; sc->sc_bshift = 0; for (i = sc->sc_blksize; i > DEV_BSIZE; i >>= 1) ++sc->sc_bshift; sc->sc_blks <<= sc->sc_bshift; return (sc->sc_blks); } /* * Test to see if device is present. * Return true if found and initialized ok. */ int rzprobe(xxxsd) void *xxxsd; { register struct pmax_scsi_device *sd = xxxsd; register struct rz_softc *sc = &rz_softc[sd->sd_unit]; register int i; register struct disk_parms *dp = &sc->params; ScsiInquiryData inqbuf; if (sd->sd_unit >= NRZ) return (0); /* init some parameters that don't change */ sc->sc_sd = sd; sc->sc_cmd.sd = sd; sc->sc_cmd.unit = sd->sd_unit; sc->sc_rwcmd.unitNumber = sd->sd_lun; /* XXX set up the external name */ bzero(&sc->sc_dev, sizeof(sc->sc_dev)); /* XXX */ sprintf(sc->sc_dev.dv_xname, "rz%d", sd->sd_unit); /* XXX */ sc->sc_dev.dv_unit = sd->sd_unit; /* XXX */ sc->sc_dev.dv_class = DV_DISK; /* XXX */ /* Initialize the disk structure. */ bzero(&sc->sc_dkdev, sizeof(sc->sc_dkdev)); sc->sc_dkdev.dk_name = sc->sc_dev.dv_xname; /* try to find out what type of device this is */ sc->sc_format_pid = 1; /* force use of sc_cdb */ sc->sc_flags = RZF_NOERR; /* don't print SCSI errors */ sc->sc_cdb.len = sizeof(ScsiGroup0Cmd); scsiGroup0Cmd(SCSI_INQUIRY, sd->sd_lun, 0, sizeof(inqbuf), (ScsiGroup0Cmd *)sc->sc_cdb.cdb); sc->sc_buf.b_flags = B_BUSY | B_PHYS | B_READ; sc->sc_buf.b_bcount = sizeof(inqbuf); sc->sc_buf.b_un.b_addr = (caddr_t)&inqbuf; sc->sc_buf.b_actf = (struct buf *)0; sc->sc_tab.b_actf = &sc->sc_buf; rzstart(sd->sd_unit); /*XXX*/ /*printf("probe rz%d\n", sd->sd_unit);*/ if (biowait(&sc->sc_buf) || (i = sizeof(inqbuf) - sc->sc_buf.b_resid) < 5) goto bad; switch (inqbuf.type) { case SCSI_DISK_TYPE: /* disk */ case SCSI_WORM_TYPE: /* WORM */ case SCSI_ROM_TYPE: /* CD-ROM */ case SCSI_OPTICAL_MEM_TYPE: /* Magneto-optical */ break; case SCSI_TAPE_TYPE: /* tape, handled by tz driver */ goto bad; default: /* not a disk */ printf("rz%d: unknown media code 0x%x\n", sd->sd_unit, inqbuf.type); goto bad; } sc->sc_type = inqbuf.type; if (inqbuf.flags & SCSI_SYNC) sc->sc_flags |= RZF_TRYSYNC; if (!inqbuf.rmb) { if (!rzready(sc)) goto bad; } printf("rz%d at %s%d drive %d lun %d", sd->sd_unit, sd->sd_cdriver->d_name, sd->sd_ctlr, sd->sd_drive, sd->sd_lun); if (inqbuf.version < 1 || i < 36) printf(" type 0x%x, qual 0x%x, ver %d", inqbuf.type, inqbuf.qualifier, inqbuf.version); else { char vid[9], pid[17], revl[5]; bcopy((caddr_t)inqbuf.vendorID, (caddr_t)vid, 8); bcopy((caddr_t)inqbuf.productID, (caddr_t)pid, 16); bcopy((caddr_t)inqbuf.revLevel, (caddr_t)revl, 4); for (i = 8; --i > 0; ) if (vid[i] != ' ') break; vid[i+1] = 0; for (i = 16; --i > 0; ) if (pid[i] != ' ') break; pid[i+1] = 0; for (i = 4; --i > 0; ) if (revl[i] != ' ') break; revl[i+1] = 0; printf(" %s %s rev %s", vid, pid, revl); } printf ("%s\n", (sc->sc_flags & RZF_FAKEGEOM) ? "; using fake geometry": ""); if (dp->blksize) printf("rz%d: %ldMB, %d cyl, %d head, %d sec, %d bytes/sec, %ld sec total\n", sd->sd_unit, dp->disksize / (1048576 / dp->blksize), dp->cyls, dp->heads, dp->sectors, dp->blksize, dp->disksize); if (!inqbuf.rmb && sc->sc_blksize != DEV_BSIZE) { if (sc->sc_blksize < DEV_BSIZE) { printf("rz%d: need %d byte blocks - drive ignored\n", sd->sd_unit, DEV_BSIZE); goto bad; } } /* Attach the disk. */ disk_attach(&sc->sc_dkdev); sc->sc_format_pid = 0; sc->sc_flags |= RZF_ALIVE; if (inqbuf.rmb) sc->sc_flags |= RZF_REMOVEABLE; sc->sc_buf.b_flags = 0; sd->sd_devp = &sc->sc_dev; /* XXX */ TAILQ_INSERT_TAIL(&alldevs, &sc->sc_dev, dv_list); /* XXX */ return (1); bad: /* doesn't exist or not a CCS device */ sc->sc_format_pid = 0; sc->sc_buf.b_flags = 0; return (0); } /* * This routine is called for partial block transfers and non-aligned * transfers (the latter only being possible on devices with a block size * larger than DEV_BSIZE). The operation is performed in three steps * using a locally allocated buffer: * 1. transfer any initial partial block * 2. transfer full blocks * 3. transfer any final partial block */ static void rzlblkstrat(bp, bsize) register struct buf *bp; register int bsize; { register struct buf *cbp; caddr_t cbuf; register int bn, resid; register caddr_t addr; cbp = (struct buf *)malloc(sizeof(struct buf), M_DEVBUF, M_WAITOK); cbuf = (caddr_t)malloc(bsize, M_DEVBUF, M_WAITOK); bzero((caddr_t)cbp, sizeof(*cbp)); cbp->b_proc = curproc; cbp->b_dev = bp->b_dev; bn = bp->b_blkno; resid = bp->b_bcount; addr = bp->b_un.b_addr; #ifdef DEBUG if (rzdebug & RZB_PARTIAL) printf("rzlblkstrat: bp %p flags %lx bn %x resid %x addr %p\n", bp, bp->b_flags, bn, resid, addr); #endif while (resid > 0) { register int boff = dbtob(bn) & (bsize - 1); register int count; if (boff || resid < bsize) { rz_softc[DISKUNIT(bp->b_dev)].sc_stats.rzpartials++; count = min(resid, bsize - boff); cbp->b_flags = B_BUSY | B_PHYS | B_READ; cbp->b_blkno = bn - btodb(boff); cbp->b_un.b_addr = cbuf; cbp->b_bcount = bsize; #ifdef DEBUG if (rzdebug & RZB_PARTIAL) printf(" readahead: bn %x cnt %x off %x addr %p\n", cbp->b_blkno, count, boff, addr); #endif rzstrategy(cbp); biowait(cbp); if (cbp->b_flags & B_ERROR) { bp->b_flags |= B_ERROR; bp->b_error = cbp->b_error; break; } if (bp->b_flags & B_READ) { bcopy(&cbuf[boff], addr, count); goto done; } bcopy(addr, &cbuf[boff], count); #ifdef DEBUG if (rzdebug & RZB_PARTIAL) printf(" writeback: bn %x cnt %x off %x addr %p\n", cbp->b_blkno, count, boff, addr); #endif } else { count = resid & ~(bsize - 1); cbp->b_blkno = bn; cbp->b_un.b_addr = addr; cbp->b_bcount = count; #ifdef DEBUG if (rzdebug & RZB_PARTIAL) printf(" fulltrans: bn %x cnt %x addr %p\n", cbp->b_blkno, count, addr); #endif } cbp->b_flags = B_BUSY | B_PHYS | (bp->b_flags & B_READ); rzstrategy(cbp); biowait(cbp); if (cbp->b_flags & B_ERROR) { bp->b_flags |= B_ERROR; bp->b_error = cbp->b_error; break; } done: bn += btodb(count); resid -= count; addr += count; #ifdef DEBUG if (rzdebug & RZB_PARTIAL) printf(" done: bn %x resid %x addr %p\n", bn, resid, addr); #endif } free(cbuf, M_DEVBUF); free(cbp, M_DEVBUF); } void rzstrategy(bp) register struct buf *bp; { register int unit = DISKUNIT(bp->b_dev); register int part = DISKPART(bp->b_dev); register struct rz_softc *sc = &rz_softc[unit]; register struct partition *pp = &sc->sc_label->d_partitions[part]; register daddr_t bn; register long sz, s; if (sc->sc_format_pid) { if (sc->sc_format_pid != curproc->p_pid) { bp->b_error = EPERM; goto bad; } bp->b_cylin = 0; } else { bn = bp->b_blkno; sz = howmany(bp->b_bcount, DEV_BSIZE); if ((unsigned)bn + sz > pp->p_size) { sz = pp->p_size - bn; /* if exactly at end of disk, return an EOF */ if (sz == 0) { bp->b_resid = bp->b_bcount; goto done; } /* if none of it fits, error */ if (sz < 0) { bp->b_error = EINVAL; goto bad; } /* otherwise, truncate */ bp->b_bcount = dbtob(sz); } /* check for write to write protected label */ if (bn + pp->p_offset <= LABELSECTOR && #if LABELSECTOR != 0 bn + pp->p_offset + sz > LABELSECTOR && #endif !(bp->b_flags & B_READ) && !(sc->sc_flags & RZF_WLABEL)) { bp->b_error = EROFS; goto bad; } /* * Non-aligned or partial-block transfers handled specially. */ s = sc->sc_blksize - 1; if ((dbtob(bn) & s) || (bp->b_bcount & s)) { rzlblkstrat(bp, sc->sc_blksize); goto done; } bp->b_cylin = (bn + pp->p_offset) >> sc->sc_bshift; } /* don't let disksort() see sc_errbuf */ while (sc->sc_flags & RZF_SENSEINPROGRESS) printf("SENSE\n"); /* XXX */ s = splbio(); disksort(&sc->sc_tab, bp); if (sc->sc_tab.b_active == 0) { sc->sc_tab.b_active = 1; rzstart(unit); } splx(s); return; bad: bp->b_flags |= B_ERROR; done: biodone(bp); } void rzstart(unit) int unit; { register struct rz_softc *sc = &rz_softc[unit]; register struct buf *bp = sc->sc_tab.b_actf; register int n; sc->sc_cmd.buf = bp->b_un.b_addr; sc->sc_cmd.buflen = bp->b_bcount; if (sc->sc_format_pid || (sc->sc_flags & (RZF_SENSEINPROGRESS | RZF_ALTCMD))) { sc->sc_cmd.flags = !(bp->b_flags & B_READ) ? SCSICMD_DATA_TO_DEVICE : 0; sc->sc_cmd.cmd = sc->sc_cdb.cdb; sc->sc_cmd.cmdlen = sc->sc_cdb.len; } else { if (bp->b_flags & B_READ) { sc->sc_cmd.flags = 0; sc->sc_rwcmd.command = SCSI_READ_EXT; } else { sc->sc_cmd.flags = SCSICMD_DATA_TO_DEVICE; sc->sc_rwcmd.command = SCSI_WRITE_EXT; } sc->sc_cmd.cmd = (u_char *)&sc->sc_rwcmd; sc->sc_cmd.cmdlen = sizeof(sc->sc_rwcmd); n = bp->b_cylin; sc->sc_rwcmd.highAddr = n >> 24; sc->sc_rwcmd.midHighAddr = n >> 16; sc->sc_rwcmd.midLowAddr = n >> 8; sc->sc_rwcmd.lowAddr = n; n = howmany(bp->b_bcount, (sc->sc_blksize) ? sc->sc_blksize : DEV_BSIZE); sc->sc_rwcmd.highBlockCount = n >> 8; sc->sc_rwcmd.lowBlockCount = n; #ifdef DEBUG if ((bp->b_bcount & (sc->sc_blksize - 1)) != 0) printf("rz%d: partial block xfer -- %lx bytes\n", unit, bp->b_bcount); #endif sc->sc_stats.rztransfers++; } /* Instrumentation. */ disk_busy(&sc->sc_dkdev); sc->sc_dkdev.dk_seek++; /* XXX */ /* tell controller to start this command */ (*sc->sc_sd->sd_cdriver->d_start)(&sc->sc_cmd); } /* * This is called by the controller driver when the command is done. */ void rzdone(unit, error, resid, status) register int unit; int error; /* error number from errno.h */ int resid; /* amount not transfered */ int status; /* SCSI status byte */ { register struct rz_softc *sc = &rz_softc[unit]; register struct buf *bp = sc->sc_tab.b_actf; register struct pmax_scsi_device *sd = sc->sc_sd; if (bp == NULL) { printf("rz%d: bp == NULL\n", unit); return; } disk_unbusy(&sc->sc_dkdev, (bp->b_bcount - resid)); if (sc->sc_flags & RZF_SENSEINPROGRESS) { sc->sc_flags &= ~RZF_SENSEINPROGRESS; sc->sc_tab.b_actf = bp = bp->b_actf; /* remove sc_errbuf */ if (error || (status & SCSI_STATUS_CHECKCOND)) { #ifdef DEBUG if (rzdebug & RZB_ERROR) printf("rz%d: error reading sense data: error %d scsi status 0x%x\n", unit, error, status); #endif /* * We got an error during the REQUEST_SENSE, * fill in no sense for data. */ sc->sc_sense.sense[0] = 0x70; sc->sc_sense.sense[2] = SCSI_CLASS7_NO_SENSE; } else if (!(sc->sc_flags & RZF_NOERR)) { ScsiClass7Sense *sp; sp = (ScsiClass7Sense *)sc->sc_sense.sense; printf("rz%d: ", unit); scsiPrintSense(sp, sizeof(sc->sc_sense.sense) - resid); if (sp->error7 == 0x70 && sp->key == SCSI_CLASS7_RECOVERABLE) { /* Recoverable error - clear error status */ bp->b_flags &= ~B_ERROR; bp->b_error = 0; } } } else if (error || (status & SCSI_STATUS_CHECKCOND)) { #ifdef DEBUG if (!(sc->sc_flags & RZF_NOERR) && (rzdebug & RZB_ERROR)) printf("rz%d: error %d scsi status 0x%x\n", unit, error, status); #endif /* save error info */ sc->sc_sense.status = status; bp->b_flags |= B_ERROR; bp->b_error = error; bp->b_resid = resid; if (status & SCSI_STATUS_CHECKCOND) { /* * Start a REQUEST_SENSE command. * Since we are called at interrupt time, we can't * wait for the command to finish; that's why we use * the sc_flags field. */ sc->sc_flags |= RZF_SENSEINPROGRESS; sc->sc_cdb.len = sizeof(ScsiGroup0Cmd); scsiGroup0Cmd(SCSI_REQUEST_SENSE, sd->sd_lun, 0, sizeof(sc->sc_sense.sense), (ScsiGroup0Cmd *)sc->sc_cdb.cdb); sc->sc_errbuf.b_flags = B_BUSY | B_PHYS | B_READ; sc->sc_errbuf.b_bcount = sizeof(sc->sc_sense.sense); sc->sc_errbuf.b_un.b_addr = (caddr_t)sc->sc_sense.sense; sc->sc_errbuf.b_actf = bp; sc->sc_tab.b_actf = &sc->sc_errbuf; rzstart(unit); return; } } else { sc->sc_sense.status = status; bp->b_resid = resid; } sc->sc_tab.b_actf = bp->b_actf; biodone(bp); if (sc->sc_tab.b_actf) rzstart(unit); else { sc->sc_tab.b_active = 0; /* finish close protocol */ if (sc->sc_openpart == 0) wakeup((caddr_t)&sc->sc_tab); } } /* * Read or constuct a disklabel */ void rzgetinfo(dev) dev_t dev; { register int unit = DISKUNIT(dev); register struct rz_softc *sc = &rz_softc[unit]; register struct disklabel *lp = sc->sc_label; char *msg; int part; struct cpu_disklabel cd; part = DISKPART(dev); sc->sc_flags |= RZF_HAVELABEL; if (sc->sc_type == SCSI_ROM_TYPE) { lp->d_type = DTYPE_SCSI; lp->d_secsize = sc->sc_blksize; lp->d_nsectors = 100; lp->d_ntracks = 1; lp->d_ncylinders = (sc->sc_blks / 100) + 1; lp->d_secpercyl = 100; lp->d_secperunit = sc->sc_blks; lp->d_rpm = 300; lp->d_interleave = 1; lp->d_flags = D_REMOVABLE; /* 4.4bsd code set 'a'. Also set up 'c' for disklabel. */ lp->d_npartitions = 3; lp->d_partitions[0].p_offset = 0; lp->d_partitions[0].p_size = sc->sc_blks; lp->d_partitions[0].p_fstype = FS_ISO9660; lp->d_partitions[1].p_offset = 0; lp->d_partitions[1].p_size = 0; lp->d_partitions[2].p_offset = 0; lp->d_partitions[2].p_size = sc->sc_blks; lp->d_partitions[2].p_fstype = FS_ISO9660; lp->d_magic = DISKMAGIC; lp->d_magic2 = DISKMAGIC; lp->d_checksum = dkcksum(lp); return; } lp->d_type = DTYPE_SCSI; lp->d_secsize = DEV_BSIZE; lp->d_secpercyl = 1 << sc->sc_bshift; lp->d_npartitions = MAXPARTITIONS; lp->d_partitions[part].p_offset = 0; lp->d_partitions[part].p_size = sc->sc_blks; /* * Now try to read the disklabel */ if ((msg = readdisklabel(dev, rzstrategy, lp, &cd, 0)) == NULL) return; printf("rz%d: WARNING: %s\n", unit, msg); #ifdef COMPAT_ULTRIX /* * No native label, try and substitute Ultrix label */ msg = compat_label(dev, rzstrategy, lp, &cd); if (msg == NULL) { printf("rz%d: WARNING: using ULTRIX partition information", unit); /* Ultrix labels have no geom info. Use softc params. */ rz_setlabelgeom(lp, &sc->params); return; } printf("rz%d: WARNING: trying Ultrix label, %s\n", unit, msg); #endif /* COMPAT_ULTRIX */ /* * No label found, cons up a fake one based on disk geometry. */ rzgetdefaultlabel(sc, lp); } int rzopen(dev, flags, mode, p) dev_t dev; int flags, mode; struct proc *p; { register int unit = DISKUNIT(dev); register struct rz_softc *sc = &rz_softc[unit]; register int i; int part; int mask; if (unit >= NRZ || !(sc->sc_flags & RZF_ALIVE)) return (ENXIO); /* Make sure the disk is ready */ if (sc->sc_flags & RZF_REMOVEABLE) { if (!rzready(sc)) return (ENXIO); } /* Try to read disk label and partition table information */ part = DISKPART(dev); mask = 1 << part; if (!(sc->sc_flags & RZF_HAVELABEL)) rzgetinfo(dev); /* Check that the partition exists. */ if (part != RAW_PART && (part >= sc->sc_label->d_npartitions || sc->sc_label->d_partitions[part].p_fstype == FS_UNUSED)) return (ENXIO); /* Ensure only one open at a time. */ switch (mode) { case S_IFCHR: sc->sc_copenpart |= mask; break; case S_IFBLK: sc->sc_bopenpart |= mask; break; } sc->sc_openpart |= mask; return (0); } int rzclose(dev, flags, mode, p) dev_t dev; int flags, mode; struct proc *p; { register struct rz_softc *sc = &rz_softc[DISKUNIT(dev)]; int mask = (1 << DISKPART(dev)); int s; switch (mode) { case S_IFCHR: sc->sc_copenpart &= ~mask; break; case S_IFBLK: sc->sc_bopenpart &= ~mask; break; } sc->sc_openpart = sc->sc_copenpart | sc->sc_bopenpart; /* * Should wait for I/O to complete on this partition even if * others are open, but wait for work on blkflush(). */ if (sc->sc_openpart == 0) { s = splbio(); while (sc->sc_tab.b_actf) sleep((caddr_t)&sc->sc_tab, PZERO - 1); splx(s); } return (0); } int rzread(dev, uio, ioflag) dev_t dev; struct uio *uio; int ioflag; { register struct rz_softc *sc = &rz_softc[DISKUNIT(dev)]; if (sc->sc_type == SCSI_ROM_TYPE) return (EROFS); if (sc->sc_format_pid && sc->sc_format_pid != curproc->p_pid) return (EPERM); return (physio(rzstrategy, (struct buf *)0, dev, B_READ, minphys, uio)); } int rzwrite(dev, uio, ioflag) dev_t dev; struct uio *uio; int ioflag; { register struct rz_softc *sc = &rz_softc[DISKUNIT(dev)]; if (sc->sc_format_pid && sc->sc_format_pid != curproc->p_pid) return (EPERM); return (physio(rzstrategy, (struct buf *)0, dev, B_WRITE, minphys, uio)); } int rzioctl(dev, cmd, data, flag, p) dev_t dev; u_long cmd; caddr_t data; int flag; struct proc *p; { register struct rz_softc *sc = &rz_softc[DISKUNIT(dev)]; int error; int flags; struct cpu_disklabel cd; switch (cmd) { default: return (EINVAL); case SDIOCSFORMAT: /* take this device into or out of "format" mode */ if (suser(p->p_ucred, &p->p_acflag)) return (EPERM); if (*(int *)data) { if (sc->sc_format_pid) return (EPERM); sc->sc_format_pid = p->p_pid; } else sc->sc_format_pid = 0; return (0); case SDIOCGFORMAT: /* find out who has the device in format mode */ *(int *)data = sc->sc_format_pid; return (0); case SDIOCSCSICOMMAND: /* * Save what user gave us as SCSI cdb to use with next * read or write to the char device. */ if (sc->sc_format_pid != p->p_pid) return (EPERM); if (legal_cmds[((struct scsi_fmt_cdb *)data)->cdb[0]] == 0) return (EINVAL); bcopy(data, (caddr_t)&sc->sc_cdb, sizeof(sc->sc_cdb)); return (0); case SDIOCSENSE: /* * return the SCSI sense data saved after the last * operation that completed with "check condition" status. */ bcopy((caddr_t)&sc->sc_sense, data, sizeof(sc->sc_sense)); return (0); case DIOCGDINFO: /* get the current disk label */ *(struct disklabel *)data = *(sc->sc_label); return (0); case DIOCSDINFO: /* set the current disk label */ if (!(flag & FWRITE)) return (EBADF); error = setdisklabel(sc->sc_label, (struct disklabel *)data, (sc->sc_flags & RZF_WLABEL) ? 0 : sc->sc_openpart, &cd); return (error); case DIOCGPART: /* return the disk partition data */ ((struct partinfo *)data)->disklab = sc->sc_label; ((struct partinfo *)data)->part = &sc->sc_label->d_partitions[DISKPART(dev)]; return (0); case DIOCWLABEL: if (!(flag & FWRITE)) return (EBADF); if (*(int *)data) sc->sc_flags |= RZF_WLABEL; else sc->sc_flags &= ~RZF_WLABEL; return (0); case DIOCWDINFO: /* write the disk label to disk */ if (!(flag & FWRITE)) return (EBADF); error = setdisklabel(sc->sc_label, (struct disklabel *)data, (sc->sc_flags & RZF_WLABEL) ? 0 : sc->sc_openpart, &cd); if (error) return (error); /* simulate opening partition 0 so write succeeds */ flags = sc->sc_flags; sc->sc_flags = RZF_ALIVE | RZF_WLABEL; error = writedisklabel(dev, rzstrategy, sc->sc_label, &cd); sc->sc_flags = flags; return (error); } /*NOTREACHED*/ } int rzsize(dev) dev_t dev; { register int unit = DISKUNIT(dev); register int part = DISKPART(dev); register struct rz_softc *sc = &rz_softc[unit]; int omask, size; if (unit >= NRZ || !(sc->sc_flags & RZF_ALIVE)) return (-1); omask = sc->sc_openpart & (1 << part); if (omask == 0 && rzopen(dev, 0, S_IFBLK, NULL) != 0) return (-1); if (part >= sc->sc_label->d_npartitions || sc->sc_label->d_partitions[part].p_fstype != FS_SWAP) size = -1; else size = sc->sc_label->d_partitions[part].p_size; if (omask == 0 && rzclose(dev, 0, S_IFBLK, NULL) != 0) return (-1); return (size); } /* * Find out from a CD-rom device what it's capacity is */ u_long rz_cdsize(cd, flags) struct rz_softc *cd; int flags; { struct scsi_read_cd_cap_data rdcap; struct scsi_read_cd_capacity scsi_cmd; int blksize; u_long size; int error; /* * make up a scsi command and ask the scsi driver to do * it for you. */ bzero(&scsi_cmd, sizeof(scsi_cmd)); scsi_cmd.opcode = READ_CD_CAPACITY; /* * If the command works, interpret the result as a 4 byte * number of blocks and a blocksize */ error = rz_command(cd, (struct scsi_generic *)&scsi_cmd, sizeof(scsi_cmd), (u_char *)&rdcap, sizeof(rdcap), CDRETRIES, 20000, NULL, flags | SCSI_DATA_IN | SCSI_SILENT); if (error != sizeof(rdcap)) { /* * the drive doesn't support the READ_CD_CAPACITY command * use a fake size */ cd->sc_flags |= RZF_FAKEGEOM; /* Must jumper CDs to 512-byte blocks to boot on pmax. */ cd->sc_blksize = 512; cd->sc_blks = 400000 * 4; return (cd->sc_blks); } blksize = _4btol(rdcap.length); if ((blksize < 512) || ((blksize & 511) != 0)) blksize = 2048; /* some drives lie ! */ cd->sc_blksize = blksize; size = _4btol(rdcap.addr) + 1; if (size < 100) size = 400000; /* ditto */ cd->sc_blks = size; return (size); } /* * Send a SCSI command to a target drive, using the 4.4bsd/pmax driver * formatting support RZ_ALTCMD machinery. * * Returns byte count returned by cmd, computed as datalen - resid * or -1 on failure. */ int rz_command(sc, scsi_cmd, cmdlen, data_addr, datalen, nretries, timeout, bp, flags) struct rz_softc *sc; struct scsi_generic *scsi_cmd; int cmdlen; u_char *data_addr; int datalen; int nretries; int timeout; struct buf *bp; u_int flags; { int retried = 0; register int recvlen, savedflags; /* * Make sure the command will fit. */ if (cmdlen > sizeof(sc->sc_cdb)) { printf("%s: rz_commamd: command too large (%d > %d)\n", sc->sc_dev.dv_xname, cmdlen, sizeof(sc->sc_cdb)); return (-1); } /* * Map OpenBSD MI scsi command flags onto 4.4bsd SCSI (rz) * flags. */ savedflags = sc->sc_flags; if (flags & SCSI_SILENT) sc->sc_flags |= RZF_NOERR; /* * Zero out the data buffer. */ bzero(data_addr, datalen); again: /* copy request into cdb */ bcopy(scsi_cmd, &sc->sc_cdb.cdb, cmdlen); sc->sc_cdb.len = cmdlen; /* * Send the command to the drive and wait for it to * complete. */ sc->sc_buf.b_flags = B_BUSY | B_PHYS | (flags & SCSI_DATA_IN) ? B_READ : B_WRITE; sc->sc_buf.b_bcount = datalen; sc->sc_buf.b_un.b_addr = (caddr_t)data_addr; sc->sc_buf.b_actf = (struct buf *)0; sc->sc_tab.b_actf = &sc->sc_buf; sc->sc_flags |= RZF_ALTCMD; rzstart(sc->sc_cmd.unit); sc->sc_flags &= ~RZF_ALTCMD; DELAY(timeout); if (biowait(&sc->sc_buf)) { recvlen = -1; goto done; } recvlen = datalen - sc->sc_buf.b_resid; if (recvlen == 0) { /* * Gack, command didn't work; try again. */ DELAY(timeout); if (retried++ < nretries) goto again; } done: sc->sc_flags = savedflags; /* Restore flags. */ return (recvlen); } /* * mode-sense code, lifted from scsi/sd.c. * Returns 0 on no error. */ static int rz_mode_sense(sd, scsi_sense, page, pagelen, flags) struct rz_softc *sd; struct scsi_mode_sense_data *scsi_sense; int page, pagelen, flags; { struct scsi_mode_sense scsi_cmd; register int nbytes; /* * Make sure the sense buffer is clean before we do * the mode sense, so that checks for bogus values of * 0 will work in case the mode sense fails. */ bzero(scsi_sense, sizeof(*scsi_sense)); bzero(&scsi_cmd, sizeof(scsi_cmd)); scsi_cmd.opcode = SCSI_MODE_SENSE; scsi_cmd.page = page; scsi_cmd.length = 0x20; /* XXX verbatim from MI scsi sd.c */ /* * If the command worked, use the results to fill out * the parameter structure */ nbytes = rz_command(sd, (struct scsi_generic *)&scsi_cmd, sizeof(scsi_cmd), (u_char *)scsi_sense, sizeof(*scsi_sense), /* actual size of data buffer */ SDRETRIES, 6000, NULL, flags | SCSI_DATA_IN | SCSI_SILENT); /* * the MI scsi_cmd.len always sets cmd.length to 0x20 bytes. * sizeof(*scsip_sense) is 44, causing a 12-byte residual error * with the pmax rz.c driver. * So ask for sizeof(*scsi_sense) but make sure we got at least * 0x20 bytes back instead. */ #if defined(RZ_DEBUG) printf("rz_mode_sense: page %d,rz_command, nbytes %d\n", page, nbytes); #endif if (nbytes <= 0) return (-1); if (nbytes < pagelen) return (pagelen); /* We got at least as much as the caller wanted. Return 0 as OK. */ return(0); } void rzgetgeom(sc, flags) struct rz_softc *sc; int flags; { struct disk_parms *dp = &sc->params; struct scsi_mode_sense_data scsi_sense; int page; int error; if ((error = rz_mode_sense(sc, &scsi_sense, page = 4, sizeof(scsi_sense.pages.rigid_geometry), flags)) == 0) { SC_DEBUG(sc_link, SDEV_DB3, ("%d cyls, %d heads, %d precomp, %d red_write, %d land_zone\n", _3btol(scsi_sense.pages.rigid_geometry.ncyl), scsi_sense.pages.rigid_geometry.nheads, _2btol(scsi_sense.pages.rigid_geometry.st_cyl_wp), _2btol(scsi_sense.pages.rigid_geometry.st_cyl_rwc), _2btol(scsi_sense.pages.rigid_geometry.land_zone))); /* * KLUDGE!! (for zone recorded disks) * give a number of sectors so that sec * trks * cyls * is <= disk_size * can lead to wasted space! THINK ABOUT THIS ! */ dp->heads = scsi_sense.pages.rigid_geometry.nheads; dp->cyls = _3btol(scsi_sense.pages.rigid_geometry.ncyl); dp->blksize = _3btol(scsi_sense.blk_desc.blklen); if (dp->heads == 0 || dp->cyls == 0) goto fake_it; if (dp->blksize == 0) dp->blksize = DEV_BSIZE; /* Our caller just called rz_getsize(sc, flags). */ dp->disksize = sc->sc_blks; /* XXX dubious on SCSI */ dp->sectors = sc->sc_blks / (dp->heads * dp->cyls); return; } if ((error = rz_mode_sense(sc, &scsi_sense, page = 5, sizeof(scsi_sense.pages.flex_geometry), flags)) == 0) { dp->heads = scsi_sense.pages.flex_geometry.nheads; dp->cyls = _2btol(scsi_sense.pages.flex_geometry.ncyl); dp->blksize = _3btol(scsi_sense.blk_desc.blklen); dp->sectors = scsi_sense.pages.flex_geometry.ph_sec_tr; dp->disksize = dp->heads * dp->cyls * dp->sectors; if (dp->disksize == 0) goto fake_it; if (dp->blksize == 0) dp->blksize = DEV_BSIZE; return; } fake_it: sc->sc_flags |= RZF_FAKEGEOM; /* * use adaptec standard fictitious geometry * this depends on which controller (e.g. 1542C is * different. but we have to put SOMETHING here..) */ dp->disksize = sc->sc_blks; dp->blksize = DEV_BSIZE; dp->heads = 64; dp->sectors = 32; dp->cyls = dp->disksize / (dp->heads * dp->sectors); return; } /* * set fake or Ultrix label geometry info from softc params. */ void rz_setlabelgeom(lp, dp) struct disklabel *lp; struct disk_parms *dp; { lp->d_secsize = dp->blksize; lp->d_nsectors = dp->sectors; lp->d_ntracks = dp->heads; lp->d_ncylinders = dp->cyls; lp->d_secpercyl = lp->d_ntracks * lp->d_nsectors; /* XXX */ lp->d_secperunit = dp->disksize; /* * We must make sure d_nsectors is a sane value. * Adjust d_ncylinders to be reasonable if we * monkey with d_nsectors. */ if (lp->d_nsectors < 1) { lp->d_nsectors = 32; lp->d_ncylinders = lp->d_secperunit / (lp->d_ntracks * lp->d_nsectors); if (lp->d_ncylinders == 0) lp->d_ncylinders = dp->cyls; } } void rzgetdefaultlabel(sc, lp) struct rz_softc *sc; struct disklabel *lp; { register int i; bzero(lp, sizeof(struct disklabel)); strcpy(lp->d_packname, "fictitious"); lp->d_magic = DISKMAGIC; lp->d_magic2 = DISKMAGIC; lp->d_type = DTYPE_SCSI; lp->d_subtype = 0; if (sc->sc_type == SCSI_ROM_TYPE) strcpy(lp->d_typename, "SCSI CD-ROM"); else strcpy(lp->d_typename, "SCSI disk"); /* set geometry info from softc info. */ rz_setlabelgeom(lp, &sc->params); lp->d_rpm = 3600; lp->d_interleave = 1; lp->d_flags = 0; lp->d_npartitions = MAXPARTITIONS; /* XXX - these values for BBSIZE and SBSIZE assume ffs */ lp->d_bbsize = BBSIZE; lp->d_sbsize = SBSIZE; /* Set default partitions based on table in rzdefaultpart */ for (i = 0; i < MAXPARTITIONS; i++) { register struct partition *pp = & lp->d_partitions[i]; pp->p_size = rzdefaultpart[i].nblocks; pp->p_offset = rzdefaultpart[i].strtblk; /* Change RZ_END to be end-of-disk */ if (pp->p_size == RZ_END) pp->p_size = sc->params.disksize - pp->p_offset; /* * Clip end of partition against end of disk. * If both start and end beyond end of disk, set to zero. */ if (pp->p_offset > sc->params.disksize) { pp->p_size = 0; pp->p_offset = 0; } else if ((pp->p_size + pp->p_offset) > sc->params.disksize) pp->p_size = sc->params.disksize - pp->p_offset; } lp->d_checksum = dkcksum(lp); } /* * Non-interrupt driven, non-dma dump routine. */ int rzdump(dev, blkno, va, size) dev_t dev; daddr_t blkno; caddr_t va; size_t size; { static int rzdoingadump;/* mutex */ static dev_t rzreadydev = NODEV; /* hint: device already rzready()ed */ int sectorsize; /* size of a disk sector */ int nsects; /* number of sectors in partition */ int sectoff; /* sector offset of partition */ int nwrt, totwrt; /* total number of sectors left to write */ int unit, part; int error; struct rz_softc *sc; struct disklabel *lp; extern int cold; /* Check for recursive dump; if so, punt. */ if (rzdoingadump) return (EFAULT); rzdoingadump = 1; /* Decompose unit and partition. */ unit = DISKUNIT(dev); part = DISKPART(dev); if (unit >= NRZ) return (ENXIO); sc = &rz_softc[unit]; if ((sc->sc_flags & RZF_ALIVE) == 0) return (ENXIO); /* * XXX Prevent the tsleep() calls in biowait() in rzready() * XXX or later here from performing a switch. */ cold = 1; /* * Ready drive. rzready() does geometry-sense. Cache dev_t of * last rzready()ed device to avoid seeks to modepage. */ if (rzreadydev != dev) { if (rzready(sc) == 0) { /* Drive didn't reset. */ rzreadydev = NODEV; return (ENXIO); } rzreadydev = dev; } /* * Convert to disk sectors. Request must be a multiple of size. */ lp = sc->sc_label; sectorsize = lp->d_secsize; if ((size % sectorsize) != 0) return (EFAULT); totwrt = size / sectorsize; blkno = dbtob(blkno) / sectorsize; /* blkno in DEV_BSIZE units */ nsects = lp->d_partitions[part].p_size; sectoff = lp->d_partitions[part].p_offset; /* Check transfer bounds against partition size. */ if ((blkno < 0) || (blkno + totwrt) > nsects) return (EINVAL); /* Offset block number to start of partition. */ blkno += sectoff; while (totwrt > 0) { nwrt = totwrt; /* XXX */ #ifndef RZ_DUMP_NOT_TRUSTED /* * Create the SCSI command. */ sc->sc_rwcmd.command = SCSI_WRITE_EXT; sc->sc_rwcmd.highAddr = blkno >> 24; sc->sc_rwcmd.midHighAddr = blkno >> 16; sc->sc_rwcmd.midLowAddr = blkno >> 8; sc->sc_rwcmd.lowAddr = blkno; sc->sc_rwcmd.highBlockCount = nwrt >> 8; sc->sc_rwcmd.lowBlockCount = nwrt; /* * ...and send it to the device. */ sc->sc_buf.b_flags = B_BUSY | B_PHYS | B_WRITE; sc->sc_buf.b_bcount = nwrt * sectorsize; sc->sc_buf.b_un.b_addr = va; sc->sc_buf.b_actf = (struct buf *)0; sc->sc_tab.b_actf = &sc->sc_buf; sc->sc_cmd.flags = SCSICMD_DATA_TO_DEVICE; sc->sc_cmd.cmd = (u_char *)&sc->sc_rwcmd; sc->sc_cmd.cmdlen = sizeof(sc->sc_rwcmd); sc->sc_cmd.buf = va; sc->sc_cmd.buflen = nwrt * sectorsize; disk_busy(&sc->sc_dkdev); /* XXX */ (*sc->sc_sd->sd_cdriver->d_start)(&sc->sc_cmd); if ((error = biowait(&sc->sc_buf)) != 0) return (error); #else /* RZ_DUMP_NOT_TRUSTED */ /* Let's just talk about it first. */ printf("%s: dump addr %p, blk %d\n", sc->sc_dev.dv_xname, va, blkno); delay(500 * 1000); /* half a second */ #endif /* RZ_DUMP_NOT_TRUSTED */ /* update block count */ totwrt -= nwrt; blkno += nwrt; va += sectorsize * nwrt; } rzdoingadump = 0; return (0); } #endif /* NRZ */