/* $OpenBSD: hid.h,v 1.1 2013/10/31 08:26:12 mpi Exp $ */ /*- * Copyright (c) 2000 Tsubai Masanari. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $NetBSD: hid.h,v 1.2 2001/08/22 21:05:25 matt Exp $ */ #ifndef _POWERPC_HID_H_ #define _POWERPC_HID_H_ /* Hardware Implementation Dependent registers for the PowerPC */ #define HID0_EMCP 0x80000000 /* Enable machine check pin */ #define HID0_DBP 0x40000000 /* Disable 60x bus parity generation */ #define HID0_EBA 0x20000000 /* Enable 60x bus address parity checking */ #define HID0_EBD 0x10000000 /* Enable 60x bus data parity checking */ #define HID0_BCLK 0x08000000 /* CLK_OUT clock type selection */ #define HID0_EICE 0x04000000 /* Enable ICE output */ #define HID0_TBEN 0x04000000 /* Time base enable (7450) */ #define HID0_ECLK 0x02000000 /* CLK_OUT clock type selection */ #define HID0_PAR 0x01000000 /* Disable precharge of ARTRY */ #define HID0_STEN 0x01000000 /* Software table search enable (7450) */ #define HID0_DEEPNAP 0x01000000 /* Enable deep nap mode (970) */ #define HID0_HBATEN 0x00800000 /* High BAT enable (74[45][578]) */ #define HID0_DOZE 0x00800000 /* Enable doze mode */ #define HID0_NAP 0x00400000 /* Enable nap mode */ #define HID0_SLEEP 0x00200000 /* Enable sleep mode */ #define HID0_DPM 0x00100000 /* Enable Dynamic power management */ #define HID0_RISEG 0x00080000 /* Read I-SEG */ #define HID0_TG 0x00040000 /* Timebase Granularity (OEA64) */ #define HID0_BHTCLR 0x00040000 /* Clear branch history table (7450) */ #define HID0_EIEC 0x00040000 /* Enable internal error checking */ #define HID0_XAEN 0x00020000 /* Enable eXtended Addressing (7450) */ #define HID0_NHR 0x00010000 /* Not hard reset */ #define HID0_ICE 0x00008000 /* Enable i-cache */ #define HID0_DCE 0x00004000 /* Enable d-cache */ #define HID0_ILOCK 0x00002000 /* i-cache lock */ #define HID0_DLOCK 0x00001000 /* d-cache lock */ #define HID0_ICFI 0x00000800 /* i-cache flush invalidate */ #define HID0_DCFI 0x00000400 /* d-cache flush invalidate */ #define HID0_SPD 0x00000200 /* Disable speculative cache access */ #define HID0_XBSEN 0x00000100 /* Extended BAT block-size enable (7457) */ #define HID0_IFEM 0x00000100 /* Enable M-bit for I-fetch */ #define HID0_XBSEN 0x00000100 /* Extended BAT block size enable (7455+) */ #define HID0_SGE 0x00000080 /* Enable store gathering */ #define HID0_DCFA 0x00000040 /* Data cache flush assist */ #define HID0_BTIC 0x00000020 /* Enable BTIC */ #define HID0_LRSTK 0x00000010 /* Link register stack enable (7450) */ #define HID0_ABE 0x00000008 /* Enable address broadcast */ #define HID0_FOLD 0x00000008 /* Branch folding enable (7450) */ #define HID0_BHT 0x00000004 /* Enable branch history table */ #define HID0_BTCD 0x00000002 /* Branch target addr cache disable (604) */ #define HID0_NOPTI 0x00000001 /* No-op the dcbt(st) */ #define HID0_603_BITMASK \ "\20" \ "\040EMCP\037DBP\036EBA\035EBD\034BCLK\033EICE\032ECLK\031PAR" \ "\030DOZE\027NAP\026SLEEP\025DPM\024RISEG\023EIEC\022res\021NHR" \ "\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011IFEM" \ "\010SGE\007DCFA\006BTIC\005FBIOB\004ABE\003BHT\002NOPDST\001NOPTI" #define HID0_7450_BITMASK \ "\20" \ "\040EMCP\037b1\036b2\035b3\034b4\033TBEN\032b6\031STEN" \ "\030HBATEN\027NAP\026SLEEP\025DPM\024b12\023BHTCLR\022XAEN\021NHR" \ "\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011XBSEN" \ "\010SGE\007b25\006BTIC\005LRSTK\004FOLD\003BHT\002NOPDST\001NOPTI" #define HID0_970_BITMASK \ "\20" \ "\040ONEPPC\037SINGLE\036ISYNCSC\035SERGP\031DEEPNAP\030DOZE" \ "\027NAP\025DPM\023TG\022HANGDETECT\021NHR\020INORDER" \ "\016TBCTRL\015TBEN\012CIABREN\011HDICEEN" \ "\010ENTHERM\001ENATTN" /* * HID0 bit definitions per cpu model * * bit 603 604 750 7400 7410 7450 7457 * 0 EMCP EMCP EMCP EMCP EMCP - - * 1 - ECP DBP - - - - * 2 EBA EBA EBA EBA EDA - - * 3 EBD EBD EBD EBD EBD - - * 4 SBCLK - BCLK BCKL BCLK - - * 5 EICE - - - - TBEN TBEN * 6 ECLK - ECLK ECLK ECLK - - * 7 PAR PAR PAR PAR PAR STEN STEN * 8 DOZE - DOZE DOZE DOZE - HBATEN * 9 NAP - NAP NAP NAP NAP NAP * 10 SLEEP - SLEEP SLEEP SLEEP SLEEP SLEEP * 11 DPM - DPM DPM DPM DPM DPM * 12 RISEG - - RISEG - - - * 13 - - - EIEC EIEC BHTCLR BHTCLR * 14 - - - - - XAEN XAEN * 15 - NHR NHR NHR NHR NHR NHR * 16 ICE ICE ICE ICE ICE ICE ICE * 17 DCE DCE DCE DCE DCE DCE DCE * 18 ILOCK ILOCK ILOCK ILOCK ILOCK ILOCK ILOCK * 19 DLOCK DLOCK DLOCK DLOCK DLOCK DLOCK DLOCK * 20 ICFI ICFI ICFI ICFI ICFI ICFI ICFI * 21 DCFI DCFI DCFI DCFI DCFI DCFI DCFI * 22 - - SPD SPD SPG SPD SPD * 23 - - IFEM IFTT IFTT - XBSEN * 24 - SIE SGE SGE SGE SGE SGE * 25 - - DCFA DCFA DCFA - - * 26 - - BTIC BTIC BTIC BTIC BTIC * 27 FBIOB - - - - LRSTK LRSTK * 28 - - ABE - - FOLD FOLD * 29 - BHT BHT BHT BHT BHT BHT * 30 - - - NOPDST NOPDST NOPDST NOPDST * 31 NOOPTI - NOOPTI NOPTI NOPTI NOPTI NOPTI * * 604: ECP = Enable cache parity checking * 604: SIE = Serial instruction execution disable * 604: BTCD = Branch target address cache disable * 7450: TBEN = Time Base Enable * 7450: STEN = Software table lookup enable * 7450: BHTCLR = Branch history clear * 7450: XAEN = Extended Addressing Enabled * 7450: LRSTK = Link Register Stack Enable * 7450: FOLD = Branch folding enable * 7457: HBATEN = High BAT Enable * 7457: XBSEN = Extended BAT Block Size Enable */ #define HID1_EMCP 0x80000000 /* Machine Check Signal Enable */ #define HID1_EBA 0x20000000 /* 60x bus address parity checking */ #define HID1_EBD 0x10000000 /* 60x bus data parity checking */ #define HID1_BCLK 0x08000000 /* CLK_OUT */ #define HID1_ECLK 0x02000000 /* CLK_OUT */ #define HID1_PAR 0x01000000 /* Disable precharge for ... */ #define HID1_DFS4 0x00800000 /* Dynamic freq scaling / 4 (7448) */ #define HID1_DFS2 0x00400000 /* Dynamic freq scaling / 2 (7447A) */ #endif /* _POWERPC_HID_H_ */