/* $OpenBSD: gbe.c,v 1.21 2013/10/21 10:36:16 miod Exp $ */ /* * Copyright (c) 2007, 2008, 2009 Joel Sing * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* * Graphics Back End (GBE) Framebuffer for SGI O2. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "gbereg.h" /* Amount of memory to allocate for framebuffer. */ #define GBE_FB_SIZE 8 * 1 << 20 /* * Colourmap data. */ struct gbe_cmap { u_int8_t cm_red[256]; u_int8_t cm_green[256]; u_int8_t cm_blue[256]; }; /* * Screen data. */ struct gbe_screen { struct device *sc; /* Back pointer. */ struct rasops_info ri; /* Screen raster display info. */ struct rasops_info ri_tile; /* Raster info for rasops tile. */ struct gbe_cmap cmap; /* Display colour map. */ int fb_size; /* Size of framebuffer memory. */ int tm_size; /* Size of tilemap memory. */ caddr_t tm; /* Address of tilemap memory. */ paddr_t tm_phys; /* Physical address of tilemap. */ caddr_t fb; /* Address of framebuffer memory. */ paddr_t fb_phys; /* Physical address of framebuffer. */ caddr_t ro; /* Address of rasops tile. */ paddr_t ro_phys; /* Physical address of rasops tile. */ int width; /* Width in pixels. */ int height; /* Height in pixels. */ int depth; /* Colour depth in bits. */ int mode; /* Display mode. */ int bufmode; /* Rendering engine buffer mode. */ int linebytes; /* Bytes per line. */ int ro_curpos; /* Current position in rasops tile. */ }; /* * GBE device data. */ struct gbe_softc { struct device sc_dev; bus_space_tag_t iot; bus_space_handle_t ioh; /* GBE registers. */ bus_space_handle_t re_ioh; /* Rendering engine registers. */ bus_dma_tag_t dmat; int rev; /* Hardware revision. */ int console; /* Is this the console? */ int screens; /* No of screens allocated. */ struct gbe_screen *curscr; /* Current screen. */ }; /* * Hardware and device related functions. */ void gbe_init_screen(struct gbe_screen *); void gbe_enable(struct gbe_softc *); void gbe_disable(struct gbe_softc *); void gbe_setup(struct gbe_softc *); void gbe_setcolour(struct gbe_softc *, u_int, u_int8_t, u_int8_t, u_int8_t); void gbe_wait_re_idle(struct gbe_softc *); /* * Colour map handling for indexed modes. */ int gbe_getcmap(struct gbe_cmap *, struct wsdisplay_cmap *); int gbe_putcmap(struct gbe_cmap *, struct wsdisplay_cmap *); void gbe_loadcmap(struct gbe_screen *, u_int, u_int); /* * Interfaces for wscons. */ int gbe_ioctl(void *, u_long, caddr_t, int, struct proc *); paddr_t gbe_mmap(void *, off_t, int); int gbe_alloc_screen(void *, const struct wsscreen_descr *, void **, int *, int *, long *); void gbe_free_screen(void *, void *); int gbe_show_screen(void *, void *, int, void (*)(void *, int, int), void *); int gbe_load_font(void *, void *, struct wsdisplay_font *); int gbe_list_font(void *, struct wsdisplay_font *); /* * Hardware acceleration for rasops. */ void gbe_rop(struct gbe_softc *, int, int, int, int, int); void gbe_copyrect(struct gbe_softc *, int, int, int, int, int, int, int); void gbe_fillrect(struct gbe_softc *, int, int, int, int, int); int gbe_do_cursor(struct rasops_info *); int gbe_putchar(void *, int, int, u_int, long); int gbe_copycols(void *, int, int, int, int); int gbe_erasecols(void *, int, int, int, long); int gbe_copyrows(void *, int, int, int); int gbe_eraserows(void *, int, int, long); static struct gbe_screen gbe_consdata; static int gbe_console; struct wsscreen_descr gbe_stdscreen = { "std", /* Screen name. */ }; struct wsdisplay_accessops gbe_accessops = { .ioctl = gbe_ioctl, .mmap = gbe_mmap, .alloc_screen = gbe_alloc_screen, .free_screen = gbe_free_screen, .show_screen = gbe_show_screen, .load_font = gbe_load_font, .list_font = gbe_list_font }; const struct wsscreen_descr *gbe_scrlist[] = { &gbe_stdscreen }; struct wsscreen_list gbe_screenlist = { sizeof(gbe_scrlist) / sizeof(struct wsscreen_descr *), gbe_scrlist }; int gbe_match(struct device *, void *, void *); void gbe_attach(struct device *, struct device *, void *); int gbe_activate(struct device *, int); struct cfattach gbe_ca = { sizeof (struct gbe_softc), gbe_match, gbe_attach, NULL, gbe_activate }; struct cfdriver gbe_cd = { NULL, "gbe", DV_DULL }; int gbe_match(struct device *parent, void *cf, void *aux) { struct mainbus_attach_args *maa = aux; if (strcmp(maa->maa_name, gbe_cd.cd_name) != 0) return 0; return 1; } void gbe_attach(struct device *parent, struct device *self, void *aux) { struct gbe_softc *gsc = (void*)self; struct gbe_screen *screen; struct wsemuldisplaydev_attach_args waa; bus_dma_segment_t tm_segs[1]; bus_dma_segment_t fb_segs[1]; bus_dma_segment_t ro_segs[1]; bus_dmamap_t tm_dmamap; bus_dmamap_t fb_dmamap; bus_dmamap_t ro_dmamap; int tm_nsegs; int fb_nsegs; int ro_nsegs; uint32_t val; long attr; printf(": "); /* GBE isn't strictly on the crimebus, but use this for now... */ gsc->iot = &crimebus_tag; gsc->dmat = &mace_bus_dma_tag; gsc->console = gbe_console; gsc->screens = 0; if (gsc->console == 1) { /* * We've already been setup via gbe_cnattach(). */ gsc->ioh = PHYS_TO_XKPHYS(GBE_BASE, CCA_NC); gsc->re_ioh = PHYS_TO_XKPHYS(RE_BASE, CCA_NC); gsc->rev = bus_space_read_4(gsc->iot, gsc->ioh, GBE_CTRL_STAT) & 0xf; gsc->curscr = &gbe_consdata; gbe_consdata.sc = (void*)self; printf("rev %u, %iMB, %dx%d at %d bits\n", gsc->rev, gbe_consdata.fb_size >> 20, gbe_consdata.width, gbe_consdata.height, gbe_consdata.depth); waa.console = gsc->console; waa.scrdata = &gbe_screenlist; waa.accessops = &gbe_accessops; waa.accesscookie = &gbe_consdata; waa.defaultscreens = 0; config_found(self, &waa, wsemuldisplaydevprint); return; } /* * Setup screen data. */ gsc->curscr = malloc(sizeof(struct gbe_screen), M_DEVBUF, M_NOWAIT); if (gsc->curscr == NULL) { printf("failed to allocate screen memory!\n"); return; } gsc->curscr->sc = (void *)gsc; screen = gsc->curscr; /* * Setup bus space mappings. */ if (bus_space_map(gsc->iot, GBE_BASE - CRIMEBUS_BASE, GBE_REG_SIZE, BUS_SPACE_MAP_LINEAR, &gsc->ioh)) { printf("failed to map framebuffer bus space!\n"); return; } if (bus_space_map(gsc->iot, RE_BASE - CRIMEBUS_BASE, RE_REG_SIZE, BUS_SPACE_MAP_LINEAR, &gsc->re_ioh)) { printf("failed to map rendering engine bus space!\n"); goto fail0; } /* Determine GBE revision. */ gsc->rev = bus_space_read_4(gsc->iot, gsc->ioh, GBE_CTRL_STAT) & 0xf; /* Determine resolution configured by firmware. */ val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_VT_HCMAP); screen->width = (val >> GBE_VT_HCMAP_ON_SHIFT) & 0xfff; val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_VT_VCMAP); screen->height = (val >> GBE_VT_VCMAP_ON_SHIFT) & 0xfff; if (screen->width == 0 || screen->height == 0) { printf("device has not been setup by firmware!\n"); goto fail1; } /* Setup screen defaults. */ screen->fb_size = GBE_FB_SIZE; screen->tm_size = GBE_TLB_SIZE * sizeof(uint16_t); screen->depth = 8; screen->linebytes = screen->width * screen->depth / 8; /* * Setup DMA for tilemap. */ if (bus_dmamap_create(gsc->dmat, screen->tm_size, 1, screen->tm_size, 0, BUS_DMA_NOWAIT, &tm_dmamap)) { printf("failed to create DMA map for tilemap!\n"); goto fail1; } if (bus_dmamem_alloc(gsc->dmat, screen->tm_size, 65536, 0, tm_segs, 1, &tm_nsegs, BUS_DMA_NOWAIT)) { printf("failed to allocate DMA memory for tilemap!\n"); goto fail2; } if (bus_dmamem_map(gsc->dmat, tm_segs, tm_nsegs, screen->tm_size, &screen->tm, BUS_DMA_COHERENT)) { printf("failed to map DMA memory for tilemap!\n"); goto fail3; } if (bus_dmamap_load(gsc->dmat, tm_dmamap, screen->tm, screen->tm_size, NULL, BUS_DMA_NOWAIT)){ printf("failed to load DMA map for tilemap\n"); goto fail4; } /* * Setup DMA for framebuffer. */ if (bus_dmamap_create(gsc->dmat, screen->fb_size, 1, screen->fb_size, 0, BUS_DMA_NOWAIT, &fb_dmamap)) { printf("failed to create DMA map for framebuffer!\n"); goto fail5; } if (bus_dmamem_alloc(gsc->dmat, screen->fb_size, 65536, 0, fb_segs, 1, &fb_nsegs, BUS_DMA_NOWAIT)) { printf("failed to allocate DMA memory for framebuffer!\n"); goto fail6; } if (bus_dmamem_map(gsc->dmat, fb_segs, fb_nsegs, screen->fb_size, &screen->fb, BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) { printf("failed to map DMA memory for framebuffer!\n"); goto fail7; } if (bus_dmamap_load(gsc->dmat, fb_dmamap, screen->fb, screen->fb_size, NULL, BUS_DMA_NOWAIT)) { printf("failed to load DMA map for framebuffer\n"); goto fail8; } /* * Setup DMA for rasops tile. */ if (bus_dmamap_create(gsc->dmat, GBE_TILE_SIZE, 1, GBE_TILE_SIZE, 0, BUS_DMA_NOWAIT, &ro_dmamap)) { printf("failed to create DMA map for rasops tile!\n"); goto fail9; } if (bus_dmamem_alloc(gsc->dmat, GBE_TILE_SIZE, 65536, 0, ro_segs, 1, &ro_nsegs, BUS_DMA_NOWAIT)) { printf("failed to allocate DMA memory for rasops tile!\n"); goto fail10; } if (bus_dmamem_map(gsc->dmat, ro_segs, ro_nsegs, GBE_TILE_SIZE, &screen->ro, BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) { printf("failed to map DMA memory for rasops tile!\n"); goto fail11; } if (bus_dmamap_load(gsc->dmat, ro_dmamap, screen->ro, GBE_TILE_SIZE, NULL, BUS_DMA_NOWAIT)) { printf("failed to load DMA map for rasops tile\n"); goto fail12; } screen->tm_phys = tm_dmamap->dm_segs[0].ds_addr; screen->fb_phys = fb_dmamap->dm_segs[0].ds_addr; screen->ro_phys = ro_dmamap->dm_segs[0].ds_addr; gbe_init_screen(screen); gbe_disable(gsc); gbe_setup(gsc); gbe_enable(gsc); /* Load colourmap if required. */ if (screen->depth == 8) gbe_loadcmap(screen, 0, 255); /* Clear framebuffer. */ gbe_fillrect(gsc, 0, 0, screen->width, screen->height, 0); printf("rev %u, %iMB, %dx%d at %d bits\n", gsc->rev, screen->fb_size >> 20, screen->width, screen->height, screen->depth); /* * Attach wsdisplay. */ /* Attach as console if necessary. */ if (strncmp(bios_console, "video", 5) == 0) { screen->ri.ri_ops.alloc_attr(&screen->ri, 0, 0, 0, &attr); wsdisplay_cnattach(&gbe_stdscreen, &screen->ri, 0, 0, attr); gsc->console = 1; } waa.console = gsc->console; waa.scrdata = &gbe_screenlist; waa.accessops = &gbe_accessops; waa.accesscookie = screen; waa.defaultscreens = 0; config_found(self, &waa, wsemuldisplaydevprint); return; fail12: bus_dmamem_unmap(gsc->dmat, screen->ro, GBE_TILE_SIZE); fail11: bus_dmamem_free(gsc->dmat, ro_segs, ro_nsegs); fail10: bus_dmamap_destroy(gsc->dmat, ro_dmamap); fail9: bus_dmamap_unload(gsc->dmat, fb_dmamap); fail8: bus_dmamem_unmap(gsc->dmat, screen->fb, screen->fb_size); fail7: bus_dmamem_free(gsc->dmat, fb_segs, fb_nsegs); fail6: bus_dmamap_destroy(gsc->dmat, fb_dmamap); fail5: bus_dmamap_unload(gsc->dmat, tm_dmamap); fail4: bus_dmamem_unmap(gsc->dmat, screen->tm, screen->tm_size); fail3: bus_dmamem_free(gsc->dmat, tm_segs, tm_nsegs); fail2: bus_dmamap_destroy(gsc->dmat, tm_dmamap); fail1: bus_space_unmap(gsc->iot, gsc->re_ioh, RE_REG_SIZE); fail0: bus_space_unmap(gsc->iot, gsc->ioh, GBE_REG_SIZE); } int gbe_activate(struct device *self, int act) { struct gbe_softc *gsc = (struct gbe_softc *)self; int ret = 0; switch (act) { case DVACT_POWERDOWN: gbe_disable(gsc); break; } return (ret); } /* * GBE hardware specific functions. */ void gbe_init_screen(struct gbe_screen *screen) { uint16_t *tm; int i; /* * Initialise screen. */ screen->mode = WSDISPLAYIO_MODE_EMUL; /* Initialise rasops. */ memset(&screen->ri, 0, sizeof(struct rasops_info)); screen->ri.ri_flg = RI_CENTER; screen->ri.ri_depth = screen->depth; screen->ri.ri_width = screen->width; screen->ri.ri_height = screen->height; screen->ri.ri_bits = (void *)screen->fb; screen->ri.ri_stride = screen->linebytes; if (screen->depth == 32) { screen->ri.ri_rpos = 24; screen->ri.ri_rnum = 8; screen->ri.ri_gpos = 16; screen->ri.ri_gnum = 8; screen->ri.ri_bpos = 8; screen->ri.ri_bnum = 8; } else if (screen->depth == 16) { screen->ri.ri_rpos = 10; screen->ri.ri_rnum = 5; screen->ri.ri_gpos = 5; screen->ri.ri_gnum = 5; screen->ri.ri_bpos = 0; screen->ri.ri_bnum = 5; } rasops_init(&screen->ri, screen->height / 8, screen->width / 8); /* Create a rasops instance that can draw into a single tile. */ memcpy(&screen->ri_tile, &screen->ri, sizeof(struct rasops_info)); screen->ri_tile.ri_flg = 0; screen->ri_tile.ri_width = GBE_TILE_WIDTH >> (screen->depth >> 4); screen->ri_tile.ri_height = GBE_TILE_HEIGHT; screen->ri_tile.ri_stride = screen->ri_tile.ri_width * screen->depth / 8; screen->ri_tile.ri_xorigin = 0; screen->ri_tile.ri_yorigin = 0; screen->ri_tile.ri_bits = screen->ro; screen->ri_tile.ri_origbits = screen->ro; screen->ro_curpos = 0; screen->ri.ri_hw = screen->sc; screen->ri.ri_do_cursor = gbe_do_cursor; screen->ri.ri_ops.putchar = gbe_putchar; screen->ri.ri_ops.copyrows = gbe_copyrows; screen->ri.ri_ops.copycols = gbe_copycols; screen->ri.ri_ops.eraserows = gbe_eraserows; screen->ri.ri_ops.erasecols = gbe_erasecols; gbe_stdscreen.ncols = screen->ri.ri_cols; gbe_stdscreen.nrows = screen->ri.ri_rows; gbe_stdscreen.textops = &screen->ri.ri_ops; gbe_stdscreen.fontwidth = screen->ri.ri_font->fontwidth; gbe_stdscreen.fontheight = screen->ri.ri_font->fontheight; gbe_stdscreen.capabilities = screen->ri.ri_caps; /* * Map framebuffer into tilemap. Each entry in the tilemap is 16 bits * wide. Each tile is 64KB or 2^16 bits, hence the last 16 bits of the * address will range from 0x0000 to 0xffff. As a result we simply * discard the lower 16 bits and store bits 17 through 32 as an entry * in the tilemap. */ tm = (void *)screen->tm; for (i = 0; i < (screen->fb_size >> GBE_TILE_SHIFT) && i < GBE_TLB_SIZE; i++) tm[i] = (screen->fb_phys >> GBE_TILE_SHIFT) + i; } void gbe_enable(struct gbe_softc *gsc) { struct gbe_screen *screen = gsc->curscr; uint32_t val; int i; /* Enable dot clock. */ val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_DOTCLOCK); bus_space_write_4(gsc->iot, gsc->ioh, GBE_DOTCLOCK, val | GBE_DOTCLOCK_RUN); for (i = 0; i < 10000; i++) { val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_DOTCLOCK); if ((val & GBE_DOTCLOCK_RUN) == GBE_DOTCLOCK_RUN) break; delay(10); } if (i == 10000) printf("timeout enabling dot clock!\n"); /* Unfreeze pixel counter. */ bus_space_write_4(gsc->iot, gsc->ioh, GBE_VT_XY, 0); for (i = 0; i < 10000; i++) { val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_VT_XY); if ((val & GBE_VT_XY_FREEZE) == 0) break; delay(10); } if (i == 10000) printf("timeout unfreezing pixel counter!\n"); /* Disable sync-on-green. */ if (strcmp(osloadoptions, "nosog") == 0) bus_space_write_4(gsc->iot, gsc->ioh, GBE_VT_FLAGS, GBE_VT_SYNC_LOW); /* Provide GBE with address of tilemap and enable DMA. */ bus_space_write_4(gsc->iot, gsc->ioh, GBE_FB_CTRL, ((screen->tm_phys >> 9) << GBE_FB_CTRL_TILE_PTR_SHIFT) | GBE_FB_CTRL_DMA_ENABLE); } void gbe_disable(struct gbe_softc *gsc) { uint32_t val; int i; /* Nothing to do if the pixel counter is frozen! */ val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_VT_XY); if ((val & GBE_VT_XY_FREEZE) == GBE_VT_XY_FREEZE) return; /* Enable sync-on-green. */ bus_space_write_4(gsc->iot, gsc->ioh, GBE_VT_FLAGS, 0); val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_DOTCLOCK); if ((val & GBE_DOTCLOCK_RUN) == 0) return; /* Disable overlay and turn off hardware cursor. */ bus_space_write_4(gsc->iot, gsc->ioh, GBE_OVERLAY_TILE, 0); bus_space_write_4(gsc->iot, gsc->ioh, GBE_CURSOR_CTRL, 0); bus_space_write_4(gsc->iot, gsc->ioh, GBE_DID_CTRL, 0); /* Disable DMA. */ val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_OVERLAY_CTRL); bus_space_write_4(gsc->iot, gsc->ioh, GBE_OVERLAY_CTRL, val & ~GBE_OVERLAY_CTRL_DMA_ENABLE); val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_FB_CTRL); bus_space_write_4(gsc->iot, gsc->ioh, GBE_FB_CTRL, val & ~GBE_FB_CTRL_DMA_ENABLE); bus_space_write_4(gsc->iot, gsc->ioh, GBE_DID_CTRL, 0); for (i = 0; i < 100000; i++) { if ((bus_space_read_4(gsc->iot, gsc->ioh, GBE_OVERLAY_HW_CTRL) & GBE_OVERLAY_CTRL_DMA_ENABLE) == 0 && (bus_space_read_4(gsc->iot, gsc->ioh, GBE_FB_HW_CTRL) & GBE_FB_CTRL_DMA_ENABLE) == 0 && bus_space_read_4(gsc->iot, gsc->ioh, GBE_DID_HW_CTRL) == 0) break; delay(10); } if (i == 100000) printf("timeout disabling DMA!\n"); /* Wait for the end of pixel refresh. */ val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_VT_VPIX) & GBE_VT_VPIX_OFF_MASK; for (i = 0; i < 100000; i++) { if (((bus_space_read_4(gsc->iot, gsc->ioh, GBE_VT_XY) & GBE_VT_XY_Y_MASK) >> GBE_VT_XY_Y_SHIFT) < val) break; delay(1); } if (i == 100000) printf("timeout waiting for pixel refresh!\n"); for (i = 0; i < 100000; i++) { if (((bus_space_read_4(gsc->iot, gsc->ioh, GBE_VT_XY) & GBE_VT_XY_Y_MASK) >> GBE_VT_XY_Y_SHIFT) > val) break; delay(1); } if (i == 100000) printf("timeout waiting for pixel refresh!\n"); /* Freeze pixel counter. */ bus_space_write_4(gsc->iot, gsc->ioh, GBE_VT_XY, GBE_VT_XY_FREEZE); for (i = 0; i < 100000; i++) { val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_VT_XY); if ((val & GBE_VT_XY_FREEZE) == GBE_VT_XY_FREEZE) break; delay(10); } if (i == 100000) printf("timeout freezing pixel counter!\n"); /* Disable dot clock. */ val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_DOTCLOCK); bus_space_write_4(gsc->iot, gsc->ioh, GBE_DOTCLOCK, val & ~GBE_DOTCLOCK_RUN); for (i = 0; i < 100000; i++) { val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_DOTCLOCK); if ((val & GBE_DOTCLOCK_RUN) == 0) break; delay(10); } if (i == 100000) printf("timeout disabling dot clock!\n"); /* Reset DMA fifo. */ val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_FB_SIZE_TILE); val &= ~(1 << GBE_FB_SIZE_TILE_FIFO_RESET_SHIFT); bus_space_write_4(gsc->iot, gsc->ioh, GBE_FB_SIZE_TILE, val | (1 << GBE_FB_SIZE_TILE_FIFO_RESET_SHIFT)); bus_space_write_4(gsc->iot, gsc->ioh, GBE_FB_SIZE_TILE, val); } void gbe_setup(struct gbe_softc *gsc) { struct gbe_screen *screen = gsc->curscr; int i, t, cmode, tile_width, tiles_x, tiles_y; u_char *colour; uint16_t *tm; uint32_t val; uint64_t reg; /* * Setup framebuffer. */ switch (screen->depth) { case 32: cmode = GBE_CMODE_RGB8; screen->bufmode = COLOUR_DEPTH_32 << BUFMODE_BUFDEPTH_SHIFT | PIXEL_TYPE_RGB << BUFMODE_PIXTYPE_SHIFT | COLOUR_DEPTH_32 << BUFMODE_PIXDEPTH_SHIFT; break; case 16: cmode = GBE_CMODE_ARGB5; screen->bufmode = COLOUR_DEPTH_16 << BUFMODE_BUFDEPTH_SHIFT | PIXEL_TYPE_RGBA << BUFMODE_PIXTYPE_SHIFT | COLOUR_DEPTH_16 << BUFMODE_PIXDEPTH_SHIFT; break; case 8: default: cmode = GBE_CMODE_I8; screen->bufmode = COLOUR_DEPTH_8 << BUFMODE_BUFDEPTH_SHIFT | PIXEL_TYPE_CI << BUFMODE_PIXTYPE_SHIFT | COLOUR_DEPTH_8 << BUFMODE_PIXDEPTH_SHIFT; break; } /* Calculate tile width in bytes and screen size in tiles. */ tile_width = GBE_TILE_WIDTH >> (screen->depth >> 4); tiles_x = (screen->width + tile_width - 1) >> (GBE_TILE_WIDTH_SHIFT - (screen->depth >> 4)); tiles_y = (screen->height + GBE_TILE_HEIGHT - 1) >> GBE_TILE_HEIGHT_SHIFT; if (screen->mode != WSDISPLAYIO_MODE_EMUL) { /* * Setup the framebuffer in "linear" mode. We trick the * framebuffer into linear mode by telling it that it is one * tile wide and specifying an adjusted framebuffer height. */ bus_space_write_4(gsc->iot, gsc->ioh, GBE_FB_SIZE_TILE, ((screen->depth >> 4) << GBE_FB_SIZE_TILE_DEPTH_SHIFT) | (1 << GBE_FB_SIZE_TILE_WIDTH_SHIFT)); bus_space_write_4(gsc->iot, gsc->ioh, GBE_FB_SIZE_PIXEL, (screen->width * screen->height / tile_width) << GBE_FB_SIZE_PIXEL_HEIGHT_SHIFT); } else { /* * Setup the framebuffer in tiled mode. Provide the tile * colour depth, screen width in whole and partial tiles, * and the framebuffer height in pixels. */ bus_space_write_4(gsc->iot, gsc->ioh, GBE_FB_SIZE_TILE, ((screen->depth >> 4) << GBE_FB_SIZE_TILE_DEPTH_SHIFT) | ((screen->width / tile_width) << GBE_FB_SIZE_TILE_WIDTH_SHIFT) | (((screen->width % tile_width) >> (screen->depth >> 4)) / 32)); bus_space_write_4(gsc->iot, gsc->ioh, GBE_FB_SIZE_PIXEL, screen->height << GBE_FB_SIZE_PIXEL_HEIGHT_SHIFT); } /* Set colour mode registers. */ val = (cmode << GBE_WID_MODE_SHIFT) | GBE_BMODE_BOTH; for (i = 0; i < (32 * 4); i += 4) bus_space_write_4(gsc->iot, gsc->ioh, GBE_MODE + i, val); /* * Initialise colourmap if required. */ if (screen->depth == 8) { for (i = 0; i < 16; i++) { colour = (u_char *)&rasops_cmap[i * 3]; screen->cmap.cm_red[i] = colour[0]; screen->cmap.cm_green[i] = colour[1]; screen->cmap.cm_blue[i] = colour[2]; } for (i = 240; i < 256; i++) { colour = (u_char *)&rasops_cmap[i * 3]; screen->cmap.cm_red[i] = colour[0]; screen->cmap.cm_green[i] = colour[1]; screen->cmap.cm_blue[i] = colour[2]; } } /* * Setup an alpha ramp. */ for (i = 0; i < GBE_GMAP_ENTRIES; i++) bus_space_write_4(gsc->iot, gsc->ioh, GBE_GMAP + i * sizeof(u_int32_t), (i << 24) | (i << 16) | (i << 8)); /* * Initialise the rendering engine. */ val = screen->mode | BUF_TYPE_TLB_A << BUFMODE_BUFTYPE_SHIFT; bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_BUFMODE_SRC, val); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_BUFMODE_DST, val); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_CLIPMODE, 0); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_COLOUR_MASK, 0xffffffff); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_PIXEL_XFER_X_STEP, 1); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_PIXEL_XFER_Y_STEP, 1); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_WINOFFSET_DST, 0); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_WINOFFSET_SRC, 0); /* * Load framebuffer tiles into TLB A. Each TLB consists of a 16x16 * tile array representing 2048x2048 pixels. Each entry in the TLB * consists of four 16-bit entries which represent bits 17:32 of the * 64KB tile address. As a result, we can make use of the tilemap * which already stores tile entries in the same format. */ tm = (void *)screen->tm; for (i = 0, t = 0; i < GBE_TLB_SIZE; i++) { reg <<= 16; if (i % 16 < tiles_x) reg |= (tm[t++] | 0x8000); if (i % 4 == 3) bus_space_write_8(gsc->iot, gsc->re_ioh, RE_TLB_A + (i >> 2) * 8, reg); } /* Load single tile into TLB B for rasops. */ bus_space_write_8(gsc->iot, gsc->re_ioh, RE_TLB_B, (screen->ro_phys >> 16 | 0x8000) << 48); } void gbe_wait_re_idle(struct gbe_softc *gsc) { int i; /* Wait until rendering engine is idle. */ for (i = 0; i < 100000; i++) { if (bus_space_read_4(gsc->iot, gsc->re_ioh, RE_PP_STATUS) & RE_PP_STATUS_IDLE) break; delay(1); } if (i == 100000) printf("%s: rendering engine did not become idle!\n", gsc->sc_dev.dv_xname); } /* * Interfaces for wscons. */ int gbe_ioctl(void *v, u_long cmd, caddr_t data, int flags, struct proc *p) { struct gbe_screen *screen = (struct gbe_screen *)v; int rc, mode; switch (cmd) { case WSDISPLAYIO_GTYPE: *(u_int *)data = WSDISPLAY_TYPE_GBE; break; case WSDISPLAYIO_GINFO: { struct wsdisplay_fbinfo *fb = (struct wsdisplay_fbinfo *)data; fb->height = screen->height; fb->width = screen->width; fb->depth = screen->depth; fb->cmsize = screen->depth == 8 ? 256 : 0; } break; case WSDISPLAYIO_LINEBYTES: *(u_int *)data = screen->linebytes; break; case WSDISPLAYIO_GETCMAP: if (screen->depth == 8) { struct wsdisplay_cmap *cm = (struct wsdisplay_cmap *)data; rc = gbe_getcmap(&screen->cmap, cm); if (rc != 0) return (rc); } break; case WSDISPLAYIO_PUTCMAP: if (screen->depth == 8) { struct wsdisplay_cmap *cm = (struct wsdisplay_cmap *)data; rc = gbe_putcmap(&screen->cmap, cm); if (rc != 0) return (rc); gbe_loadcmap(screen, cm->index, cm->index + cm->count); } break; case WSDISPLAYIO_GMODE: *(u_int *)data = screen->mode; break; case WSDISPLAYIO_SMODE: mode = *(u_int *)data; if (mode == WSDISPLAYIO_MODE_EMUL || mode == WSDISPLAYIO_MODE_MAPPED || mode == WSDISPLAYIO_MODE_DUMBFB) { screen->mode = mode; gbe_disable((struct gbe_softc *)screen->sc); gbe_setup((struct gbe_softc *)screen->sc); gbe_enable((struct gbe_softc *)screen->sc); /* Clear framebuffer if entering emulated mode. */ if (screen->mode == WSDISPLAYIO_MODE_EMUL) gbe_fillrect((struct gbe_softc *)screen->sc, 0, 0, screen->width, screen->height, 0); } break; case WSDISPLAYIO_GVIDEO: case WSDISPLAYIO_SVIDEO: /* Handled by the upper layer. */ break; default: return (-1); } return (0); } paddr_t gbe_mmap(void *v, off_t offset, int protection) { struct gbe_screen *screen = (void *)v; paddr_t pa; if (offset >= 0 && offset < screen->fb_size) pa = screen->fb_phys + offset; else pa = -1; return (pa); } int gbe_alloc_screen(void *v, const struct wsscreen_descr *type, void **cookiep, int *curxp, int *curyp, long *attrp) { struct gbe_screen *screen = (struct gbe_screen *)v; struct gbe_softc *gsc = (struct gbe_softc *)screen->sc; /* We do not allow multiple consoles at the moment. */ if (gsc->screens > 0) return (ENOMEM); gsc->screens++; /* Return rasops_info via cookie. */ *cookiep = &screen->ri; /* Move cursor to top left of screen. */ *curxp = 0; *curyp = 0; /* Correct screen attributes. */ screen->ri.ri_ops.alloc_attr(&screen->ri, 0, 0, 0, attrp); return (0); } void gbe_free_screen(void *v, void *cookie) { /* We do not allow multiple consoles at the moment. */ } int gbe_show_screen(void *v, void *cookie, int waitok, void (*cb)(void *, int, int), void *cbarg) { /* We do not allow multiple consoles at the moment. */ return (0); } int gbe_load_font(void *v, void *emulcookie, struct wsdisplay_font *font) { struct gbe_screen *screen = (struct gbe_screen *)v; return rasops_load_font(&screen->ri, emulcookie, font); } int gbe_list_font(void *v, struct wsdisplay_font *font) { struct gbe_screen *screen = (struct gbe_screen *)v; return rasops_list_font(&screen->ri, font); } /* * Colour map handling for indexed modes. */ void gbe_setcolour(struct gbe_softc *gsc, u_int index, u_int8_t r, u_int8_t g, u_int8_t b) { int i; /* Wait until the colourmap FIFO has free space. */ for (i = 0; i < 10000; i++) { if (bus_space_read_4(gsc->iot, gsc->ioh, GBE_CMAP_FIFO) < GBE_CMAP_FIFO_ENTRIES) break; delay(10); } if (i == 10000) printf("colourmap FIFO has no free space!\n"); bus_space_write_4(gsc->iot, gsc->ioh, GBE_CMAP + index * sizeof(u_int32_t), ((u_int)r << 24) | ((u_int)g << 16) | ((u_int)b << 8)); } int gbe_getcmap(struct gbe_cmap *cm, struct wsdisplay_cmap *rcm) { u_int index = rcm->index, count = rcm->count; int rc; if (index >= 256 || count > 256 - index) return (EINVAL); if ((rc = copyout(&cm->cm_red[index], rcm->red, count)) != 0) return (rc); if ((rc = copyout(&cm->cm_green[index], rcm->green, count)) != 0) return (rc); if ((rc = copyout(&cm->cm_blue[index], rcm->blue, count)) != 0) return (rc); return (0); } int gbe_putcmap(struct gbe_cmap *cm, struct wsdisplay_cmap *rcm) { u_int index = rcm->index, count = rcm->count; int rc; if (index >= 256 || count > 256 - index) return (EINVAL); if ((rc = copyin(rcm->red, &cm->cm_red[index], count)) != 0) return (rc); if ((rc = copyin(rcm->green, &cm->cm_green[index], count)) != 0) return (rc); if ((rc = copyin(rcm->blue, &cm->cm_blue[index], count)) != 0) return (rc); return (0); } void gbe_loadcmap(struct gbe_screen *screen, u_int start, u_int end) { struct gbe_softc *gsc = (void *)screen->sc; struct gbe_cmap *cm = &screen->cmap; for (; start <= end; start++) gbe_setcolour(gsc, start, cm->cm_red[start], cm->cm_green[start], cm->cm_blue[start]); } /* * Hardware accelerated functions for rasops. */ void gbe_rop(struct gbe_softc *gsc, int x, int y, int w, int h, int op) { gbe_wait_re_idle(gsc); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_PRIMITIVE, PRIMITIVE_RECTANGLE | PRIMITIVE_LRTB); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_DRAWMODE, DRAWMODE_BITMASK | DRAWMODE_BYTEMASK | DRAWMODE_PIXEL_XFER | DRAWMODE_LOGIC_OP); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_LOGIC_OP, op); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_PIXEL_XFER_SRC, (x << 16) | (y & 0xffff)); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_VERTEX_X_0, (x << 16) | (y & 0xffff)); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_VERTEX_X_1 | RE_START, ((x + w - 1) << 16) | ((y + h - 1) & 0xffff)); } void gbe_copyrect(struct gbe_softc *gsc, int src, int sx, int sy, int dx, int dy, int w, int h) { int direction, x0, y0, x1, y1; if (sx >= dx && sy >= dy) { direction = PRIMITIVE_LRTB; x0 = dx; y0 = dy; x1 = dx + w - 1; y1 = dy + h - 1; } else if (sx >= dx && sy < dy) { direction = PRIMITIVE_LRBT; sy = sy + h - 1; x0 = dx; y0 = dy + h - 1; x1 = dx + w - 1; y1 = dy; } else if (sx < dx && sy >= dy) { direction = PRIMITIVE_RLTB; sx = sx + w - 1; x0 = dx + w - 1; y0 = dy; x1 = dx; y1 = dy + h - 1; } else if (sx < dx && sy < dy) { direction = PRIMITIVE_RLBT; sy = sy + h - 1; sx = sx + w - 1; x0 = dx + w - 1; y0 = dy + h - 1; x1 = dx; y1 = dy; } gbe_wait_re_idle(gsc); if (src != BUF_TYPE_TLB_A) bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_BUFMODE_SRC, gsc->curscr->bufmode | (src << BUFMODE_BUFTYPE_SHIFT)); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_PRIMITIVE, PRIMITIVE_RECTANGLE | direction); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_DRAWMODE, DRAWMODE_BITMASK | DRAWMODE_BYTEMASK | DRAWMODE_PIXEL_XFER); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_PIXEL_XFER_SRC, (sx << 16) | (sy & 0xffff)); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_VERTEX_X_0, (x0 << 16) | (y0 & 0xffff)); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_VERTEX_X_1 | RE_START, (x1 << 16) | (y1 & 0xffff)); if (src != BUF_TYPE_TLB_A) { gbe_wait_re_idle(gsc); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_BUFMODE_SRC, gsc->curscr->bufmode | (BUF_TYPE_TLB_A << BUFMODE_BUFTYPE_SHIFT)); } } void gbe_fillrect(struct gbe_softc *gsc, int x, int y, int w, int h, int bg) { gbe_wait_re_idle(gsc); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_PRIMITIVE, PRIMITIVE_RECTANGLE | PRIMITIVE_LRTB); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_DRAWMODE, DRAWMODE_BITMASK | DRAWMODE_BYTEMASK); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_SHADE_FG_COLOUR, bg); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_VERTEX_X_0, (x << 16) | (y & 0xffff)); bus_space_write_4(gsc->iot, gsc->re_ioh, RE_PP_VERTEX_X_1 | RE_START, ((x + w - 1) << 16) | ((y + h - 1) & 0xffff)); } int gbe_do_cursor(struct rasops_info *ri) { struct gbe_softc *sc = ri->ri_hw; int y, x, w, h; w = ri->ri_font->fontwidth; h = ri->ri_font->fontheight; x = ri->ri_xorigin + ri->ri_ccol * w; y = ri->ri_yorigin + ri->ri_crow * h; gbe_rop(sc, x, y, w, h, OPENGL_LOGIC_OP_COPY_INVERTED); return 0; } int gbe_putchar(void *cookie, int row, int col, u_int uc, long attr) { struct rasops_info *ri = cookie; struct gbe_softc *gsc = ri->ri_hw; struct gbe_screen *screen = gsc->curscr; struct rasops_info *ri_tile = &screen->ri_tile; int x, y, w, h; w = ri->ri_font->fontwidth; h = ri->ri_font->fontheight; x = ri->ri_xorigin + col * w; y = ri->ri_yorigin + row * h; ri_tile->ri_ops.putchar(ri_tile, 0, screen->ro_curpos, uc, attr); gbe_copyrect(gsc, BUF_TYPE_TLB_B, screen->ro_curpos * w, 0, x, y, w, h); screen->ro_curpos++; if ((screen->ro_curpos + 1) * w > screen->ri_tile.ri_width) screen->ro_curpos = 0; return 0; } int gbe_copycols(void *cookie, int row, int src, int dst, int num) { struct rasops_info *ri = cookie; struct gbe_softc *sc = ri->ri_hw; num *= ri->ri_font->fontwidth; src *= ri->ri_font->fontwidth; dst *= ri->ri_font->fontwidth; row *= ri->ri_font->fontheight; gbe_copyrect(sc, BUF_TYPE_TLB_A, ri->ri_xorigin + src, ri->ri_yorigin + row, ri->ri_xorigin + dst, ri->ri_yorigin + row, num, ri->ri_font->fontheight); return 0; } int gbe_erasecols(void *cookie, int row, int col, int num, long attr) { struct rasops_info *ri = cookie; struct gbe_softc *sc = ri->ri_hw; int bg, fg; ri->ri_ops.unpack_attr(cookie, attr, &fg, &bg, NULL); row *= ri->ri_font->fontheight; col *= ri->ri_font->fontwidth; num *= ri->ri_font->fontwidth; gbe_fillrect(sc, ri->ri_xorigin + col, ri->ri_yorigin + row, num, ri->ri_font->fontheight, ri->ri_devcmap[bg]); return 0; } int gbe_copyrows(void *cookie, int src, int dst, int num) { struct rasops_info *ri = cookie; struct gbe_softc *sc = ri->ri_hw; num *= ri->ri_font->fontheight; src *= ri->ri_font->fontheight; dst *= ri->ri_font->fontheight; gbe_copyrect(sc, BUF_TYPE_TLB_A, ri->ri_xorigin, ri->ri_yorigin + src, ri->ri_xorigin, ri->ri_yorigin + dst, ri->ri_emuwidth, num); return 0; } int gbe_eraserows(void *cookie, int row, int num, long attr) { struct rasops_info *ri = cookie; struct gbe_softc *sc = ri->ri_hw; int x, y, w, bg, fg; ri->ri_ops.unpack_attr(cookie, attr, &fg, &bg, NULL); if ((num == ri->ri_rows) && ISSET(ri->ri_flg, RI_FULLCLEAR)) { num = ri->ri_height; x = y = 0; w = ri->ri_width; } else { num *= ri->ri_font->fontheight; x = ri->ri_xorigin; y = ri->ri_yorigin + row * ri->ri_font->fontheight; w = ri->ri_emuwidth; } gbe_fillrect(sc, x, y, w, num, ri->ri_devcmap[bg]); return 0; } /* * Console functions for early display. */ int gbe_cnprobe(bus_space_tag_t iot, bus_addr_t addr) { bus_space_handle_t ioh; int val, width, height; /* Setup bus space mapping. */ ioh = PHYS_TO_XKPHYS(addr, CCA_NC); /* Determine resolution configured by firmware. */ val = bus_space_read_4(iot, ioh, GBE_VT_HCMAP); width = (val >> GBE_VT_HCMAP_ON_SHIFT) & 0xfff; val = bus_space_read_4(iot, ioh, GBE_VT_VCMAP); height = (val >> GBE_VT_VCMAP_ON_SHIFT) & 0xfff; /* Ensure that the firmware has setup the device. */ if (width != 0 && height != 0) return (1); else return (0); } int gbe_cnattach(bus_space_tag_t iot, bus_addr_t addr) { struct gbe_softc *gsc; uint32_t val; paddr_t pa; vaddr_t va; long attr; /* * Setup GBE for use as early console. */ va = pmap_steal_memory(sizeof(struct gbe_softc), NULL, NULL); gsc = (struct gbe_softc *)va; gsc->curscr = &gbe_consdata; gbe_consdata.sc = (struct device *)gsc; /* Setup bus space mapping. */ gsc->iot = iot; gsc->ioh = PHYS_TO_XKPHYS(addr, CCA_NC); gsc->re_ioh = PHYS_TO_XKPHYS(RE_BASE, CCA_NC); /* Determine GBE revision. */ gsc->rev = bus_space_read_4(gsc->iot, gsc->ioh, GBE_CTRL_STAT) & 0xf; /* Determine resolution configured by firmware. */ val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_VT_HCMAP); gbe_consdata.width = (val >> GBE_VT_HCMAP_ON_SHIFT) & 0xfff; val = bus_space_read_4(gsc->iot, gsc->ioh, GBE_VT_VCMAP); gbe_consdata.height = (val >> GBE_VT_VCMAP_ON_SHIFT) & 0xfff; /* Ensure that the firmware has setup the device. */ if (gbe_consdata.width == 0 || gbe_consdata.height == 0) return (ENXIO); /* Setup screen defaults. */ gbe_consdata.fb_size = GBE_FB_SIZE; gbe_consdata.tm_size = GBE_TLB_SIZE * sizeof(uint16_t); gbe_consdata.depth = 8; gbe_consdata.linebytes = gbe_consdata.width * gbe_consdata.depth / 8; /* * Steal memory for tilemap - 64KB aligned and coherent. */ va = pmap_steal_memory(gbe_consdata.tm_size + 65536, NULL, NULL); pmap_extract(pmap_kernel(), va, &pa); gbe_consdata.tm_phys = ((pa >> 16) + 1) << 16; gbe_consdata.tm = (caddr_t)PHYS_TO_XKPHYS(gbe_consdata.tm_phys, CCA_NC); /* * Steal memory for framebuffer - 64KB aligned and coherent. */ va = pmap_steal_memory(gbe_consdata.fb_size + 65536, NULL, NULL); pmap_extract(pmap_kernel(), va, &pa); gbe_consdata.fb_phys = ((pa >> 16) + 1) << 16; gbe_consdata.fb = (caddr_t)PHYS_TO_XKPHYS(gbe_consdata.fb_phys, CCA_NC); /* * Steal memory for rasops tile - 64KB aligned and coherent. */ va = pmap_steal_memory(GBE_TILE_SIZE + 65536, NULL, NULL); pmap_extract(pmap_kernel(), va, &pa); gbe_consdata.ro_phys = ((pa >> 16) + 1) << 16; gbe_consdata.ro = (caddr_t)PHYS_TO_XKPHYS(gbe_consdata.ro_phys, CCA_NC); /* * Setup GBE hardware. */ gbe_init_screen(&gbe_consdata); gbe_disable(gsc); gbe_setup(gsc); gbe_enable(gsc); /* Load colourmap if required. */ if (gbe_consdata.depth == 8) gbe_loadcmap(&gbe_consdata, 0, 255); /* Clear framebuffer. */ gbe_fillrect(gsc, 0, 0, gbe_consdata.width, gbe_consdata.height, 0); /* * Attach wsdisplay. */ gbe_consdata.ri.ri_ops.alloc_attr(&gbe_consdata.ri, 0, 0, 0, &attr); wsdisplay_cnattach(&gbe_stdscreen, &gbe_consdata.ri, 0, 0, attr); gbe_console = 1; return (0); }