/* $OpenBSD: cpu.h,v 1.2 2006/10/06 22:30:26 mickey Exp $ */ /* $NetBSD: cpu.h,v 1.41 2006/01/21 04:24:12 uwe Exp $ */ /*- * Copyright (c) 2002 The NetBSD Foundation, Inc. All rights reserved. * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)cpu.h 5.4 (Berkeley) 5/9/91 */ /* * SH3/SH4 support. * * T.Horiuchi Brains Corp. 5/22/98 */ #ifndef _SH_CPU_H_ #define _SH_CPU_H_ #include #include #ifdef _KERNEL /* * Can't swapout u-area, (__SWAP_BROKEN) * since we use P1 converted address for trapframe. */ #define cpu_swapin(p) /* nothing */ #define cpu_swapout(p) /* nothing */ /* * Arguments to hardclock and gatherstats encapsulate the previous * machine state in an opaque clockframe. */ struct clockframe { int spc; /* program counter at time of interrupt */ int ssr; /* status register at time of interrupt */ int ssp; /* stack pointer at time of interrupt */ }; #define CLKF_USERMODE(cf) (!KERNELMODE((cf)->ssr)) #define CLKF_BASEPRI(cf) (((cf)->ssr & 0xf0) == 0) #define CLKF_PC(cf) ((cf)->spc) #define CLKF_INTR(cf) 0 /* XXX */ /* * This is used during profiling to integrate system time. It can safely * assume that the process is resident. */ #define PROC_PC(p) \ (((struct trapframe *)(p)->p_md.md_regs)->tf_spc) /* * Preempt the current process if in interrupt from user mode, * or after the current trap/syscall if in system mode. */ #define need_resched(ci) \ do { \ want_resched = 1; \ if (curproc != NULL) \ aston(curproc); \ } while (/*CONSTCOND*/0) /* * Give a profiling tick to the current process when the user profiling * buffer pages are invalid. On the MIPS, request an ast to send us * through trap, marking the proc as needing a profiling tick. */ #define need_proftick(p) \ do { \ (p)->p_flag |= P_OWEUPC; \ aston(p); \ } while (/*CONSTCOND*/0) /* * Notify the current process (p) that it has a signal pending, * process as soon as possible. */ #define signotify(p) aston(p) #define aston(p) ((p)->p_md.md_astpending = 1) extern int want_resched; /* need_resched() was called */ #define cpu_wait(p) ((void)(p)) /* * We need a machine-independent name for this. */ #define DELAY(x) delay(x) #endif /* _KERNEL */ /* * Logical address space of SH3/SH4 CPU. */ #define SH3_PHYS_MASK 0x1fffffff #define SH3_P0SEG_BASE 0x00000000 /* TLB mapped, also U0SEG */ #define SH3_P0SEG_END 0x7fffffff #define SH3_P1SEG_BASE 0x80000000 /* pa == va */ #define SH3_P1SEG_END 0x9fffffff #define SH3_P2SEG_BASE 0xa0000000 /* pa == va, non-cacheable */ #define SH3_P2SEG_END 0xbfffffff #define SH3_P3SEG_BASE 0xc0000000 /* TLB mapped, kernel mode */ #define SH3_P3SEG_END 0xdfffffff #define SH3_P4SEG_BASE 0xe0000000 /* peripheral space */ #define SH3_P4SEG_END 0xffffffff #define SH3_P1SEG_TO_PHYS(x) ((uint32_t)(x) & SH3_PHYS_MASK) #define SH3_P2SEG_TO_PHYS(x) ((uint32_t)(x) & SH3_PHYS_MASK) #define SH3_PHYS_TO_P1SEG(x) ((uint32_t)(x) | SH3_P1SEG_BASE) #define SH3_PHYS_TO_P2SEG(x) ((uint32_t)(x) | SH3_P2SEG_BASE) #define SH3_P1SEG_TO_P2SEG(x) ((uint32_t)(x) | 0x20000000) #define SH3_P2SEG_TO_P1SEG(x) ((uint32_t)(x) & ~0x20000000) #ifdef _KERNEL #ifndef __lint__ /* switch from P1 to P2 */ #define RUN_P2 do { \ void *p; \ p = &&P2; \ goto *(void *)SH3_P1SEG_TO_P2SEG(p); \ P2: (void)0; \ } while (0) /* switch from P2 to P1 */ #define RUN_P1 do { \ void *p; \ p = &&P1; \ __asm volatile("nop;nop;nop;nop;nop;nop;nop;nop"); \ goto *(void *)SH3_P2SEG_TO_P1SEG(p); \ P1: (void)0; \ } while (0) #else /* __lint__ */ #define RUN_P2 do {} while (/* CONSTCOND */ 0) #define RUN_P1 do {} while (/* CONSTCOND */ 0) #endif #endif #if defined(SH4) /* SH4 Processor Version Register */ #define SH4_PVR_ADDR 0xff000030 /* P4 address */ #define SH4_PVR (*(volatile uint32_t *) SH4_PVR_ADDR) #define SH4_PRR_ADDR 0xff000044 /* P4 address */ #define SH4_PRR (*(volatile uint32_t *) SH4_PRR_ADDR) #define SH4_PVR_MASK 0xffffff00 #define SH4_PVR_SH7750 0x04020500 /* SH7750 */ #define SH4_PVR_SH7750S 0x04020600 /* SH7750S */ #define SH4_PVR_SH775xR 0x04050000 /* SH775xR */ #define SH4_PVR_SH7751 0x04110000 /* SH7751 */ #define SH4_PRR_MASK 0xfffffff0 #define SH4_PRR_7750R 0x00000100 /* SH7750R */ #define SH4_PRR_7751R 0x00000110 /* SH7751R */ #endif /* * pull in #defines for kinds of processors */ #include /* * CTL_MACHDEP definitions. */ #define CPU_CONSDEV 1 /* dev_t: console terminal device */ #define CPU_MAXID 2 /* number of valid machdep ids */ #define CTL_MACHDEP_NAMES { \ { 0, 0 }, \ { "console_device", CTLTYPE_STRUCT }, \ } #ifdef _KERNEL void sh_cpu_init(int, int); void sh_startup(void); __dead void cpu_reset(void); /* soft reset */ void _cpu_spin(uint32_t); /* for delay loop. */ void delay(int); struct pcb; void savectx(struct pcb *); void dumpsys(void); #endif /* _KERNEL */ #endif /* !_SH_CPU_H_ */