/* $OpenBSD: ts102reg.h,v 1.1 1999/09/07 02:58:50 jason Exp $ */ /* $NetBSD: ts102reg.h,v 1.2 1999/08/11 00:46:06 matt Exp $ */ /*- * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Matt Thomas. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _SPARC_DEV_TS102REG_H #define _SPARC_DEV_TS102REG_H /* There are two separate register blocks within the TS102. The first * gives access to PCMCIA card specific resources, and the second gives * access to the microcontroller interface */ #define TS102_REG_CARD_A_INT 0x0000 /* Card A Interrupt Register */ #define TS102_REG_CARD_A_STS 0x0004 /* Card A Status Register */ #define TS102_REG_CARD_A_CTL 0x0008 /* Card A Control Register */ #define TS102_REG_CARD_B_INT 0x0010 /* Card B Interrupt Register */ #define TS102_REG_CARD_B_STS 0x0014 /* Card B Status Register */ #define TS102_REG_CARD_B_CTL 0x0018 /* Card B Control Register */ struct uctrl_regs { volatile u_int8_t intr; /* Microcontroller Interrupt Reg */ volatile u_int8_t filler0[3]; volatile u_int8_t data; /* Microcontroller Data Reg */ volatile u_int8_t filler1[3]; volatile u_int8_t stat; /* Microcontroller Status Reg */ volatile u_int8_t filler2[3]; }; /* TS102 Card Interrupt Register defintions. * * There is one 16-bit interrupt register for each card. Each register * contains interrupt status (read) and clear (write) bits and an * interrupt mask for each of the four interrupt sources. * * The request bit is the logical AND of the status and the mask bit, * and indicated and an interrupt is being requested. The mask bits * allow masking of individual interrupts. An interrupt is enabled when * the mask is set to 1 and is clear by write a 1 to the associated * request bit. * * The card interrupt register also contain the soft reset flag. * Setting this bit to 1 will the SPARCbook 3 to be reset. */ #define TS102_CARD_INT_RQST_IRQ 0x0001 #define TS102_CARD_INT_RQST_WP_STATUS_CHANGED 0x0002 #define TS102_CARD_INT_RQST_BATTERY_STATUS_CHANGED 0x0004 #define TS102_CARD_INT_RQST_CARDDETECT_STATUS_CHANGED 0x0008 #define TS102_CARD_INT_STATUS_IRQ 0x0010 #define TS102_CARD_INT_STATUS_WP_STATUS_CHANGED 0x0020 #define TS102_CARD_INT_STATUS_BATTERY_STATUS_CHANGED 0x0040 #define TS102_CARD_INT_STATUS_CARDDETECT_STATUS_CHANGED 0x0080 #define TS102_CARD_INT_MASK_IRQ 0x0100 #define TS102_CARD_INT_MASK_WP_STATUS 0x0200 #define TS102_CARD_INT_MASK_BATTERY_STATUS 0x0400 #define TS102_CARD_INT_MASK_CARDDETECT_STATUS 0x0800 #define TS102_CARD_INT_SOFT_RESET 0x1000 /* TS102 Card Status Register definitions. The Card Status Register * contains card status and control bit. */ #define TS102_CARD_STS_PRES 0x0001 /* Card Present (1) */ #define TS102_CARD_STS_IO 0x0002 /* (1) I/O Card, (0) = Mem Card */ #define TS102_CARD_STS_TYPE3 0x0004 /* Type-3 PCMCIA card (disk) */ #define TS102_CARD_STS_VCC 0x0008 /* Vcc (0=5V, 1=3.3V) */ #define TS102_CARD_STS_VPP1_MASK 0x0030 /* Programming Voltage Control2 */ #define TS102_CARD_STS_VPP1_NC 0x0030 /* NC */ #define TS102_CARD_STS_VPP1_VCC 0x0020 /* Vcc (3.3V or 5V) */ #define TS102_CARD_STS_VPP1_VPP 0x0010 /* Vpp (12V) */ #define TS102_CARD_STS_VPP1_0V 0x0000 /* 0V */ #define TS102_CARD_STS_VPP2_MASK 0x00c0 /* Programming Voltage Control1 */ #define TS102_CARD_STS_VPP2_NC 0x00c0 /* NC */ #define TS102_CARD_STS_VPP2_VCC 0x0080 /* Vcc (3.3V or 5V) */ #define TS102_CARD_STS_VPP2_VPP 0x0040 /* Vpp (12V) */ #define TS102_CARD_STS_VPP2_0V 0x0000 /* 0V */ #define TS102_CARD_STS_WP 0x0100 /* Write Protect (1) */ #define TS102_CARD_STS_BVD_MASK 0x0600 /* Battery Voltage Detect */ #define TS102_CARD_STS_BVD_GOOD 0x0600 /* Battery good */ #define TS102_CARD_STS_BVD_LOW_OK 0x0400 /* Battery low, data OK */ #define TS102_CARD_STS_BVD_LOW_SUSPECT1 0x0200 /* Battery low, data suspect */ #define TS102_CARD_STS_BVD_LOW_SUSPECT0 0x0000 /* Battery low, data suspect */ #define TS102_CARD_STS_LVL 0x0800 /* Level (1) / Edge */ #define TS102_CARD_STS_RDY 0x1000 /* Ready (1) / Not Busy */ #define TS102_CARD_STS_VCCEN 0x2000 /* Powered Up (0) */ #define TS102_CARD_STS_RIEN 0x4000 /* Not Supported */ #define TS102_CARD_STS_ACEN 0x8000 /* Access Enabled (1) */ /* TS102 Card Control Register definitions */ #define TS102_CARD_CTL_AA_MASK 0x0003 /* Attribute Address A[25:24] */ #define TS102_CARD_CTL_IA_MASK 0x000c /* I/O Address A[25:24] */ #define TS102_CARD_CTL_IA_BITPOS 2 /* */ #define TS102_CARD_CTL_CES_MASK 0x0070 /* CE/address setup time */ #define TS102_CARD_CTL_CES_BITPOS 4 /* n+1 clocks */ #define TS102_CARD_CTL_OWE_MASK 0x0380 /* OE/WE width */ #define TS102_CARD_CTL_OWE_BITPOS 7 /* n+2 clocks */ #define TS102_CARD_CTL_CEH 0x0400 /* Chip enable hold time */ /* (0) - 1 clock */ /* (1) - 2 clocks */ #define TS102_CARD_CTL_SBLE 0x0800 /* SBus little endian */ #define TS102_CARD_CTL_PCMBE 0x1000 /* PCMCIA big endian */ #define TS102_CARD_CTL_RAHD 0x2000 /* Read ahead enable */ #define TS102_CARD_CTL_INCDIS 0x4000 /* Address increment disable */ #define TS102_CARD_CTL_PWRD 0x8000 /* Power down */ /* Microcontroller Interrupt Register */ #define TS102_UCTRL_INT_TXE_REQ 0x01 /* transmit FIFO empty */ #define TS102_UCTRL_INT_TXNF_REQ 0x02 /* transmit FIFO not full */ #define TS102_UCTRL_INT_RXNE_REQ 0x04 /* receive FIFO not empty */ #define TS102_UCTRL_INT_RXO_REQ 0x08 /* receive FIFO overflow */ #define TS102_UCTRL_INT_TXE_MSK 0x10 /* transmit FIFO empty */ #define TS102_UCTRL_INT_TXNF_MSK 0x20 /* transmit FIFO not full */ #define TS102_UCTRL_INT_RXNE_MSK 0x40 /* receive FIFO not empty */ #define TS102_UCTRL_INT_RXO_MSK 0x80 /* receive FIFO overflow */ /* TS102 Microcontroller Data Register (only 8 bits are significant). */ #define TS102_UCTRL_DATA_MASK 0xff /* TS102 Microcontroller Status Register. * read 1 if asserted * write 1 to clear */ #define TS102_UCTRL_STS_TXE_STA 0x01 /* transmit FIFO empty */ #define TS102_UCTRL_STS_TXNF_STA 0x02 /* transmit FIFO not full */ #define TS102_UCTRL_STS_RXNE_STA 0x04 /* receive FIFO not empty */ #define TS102_UCTRL_STS_RXO_STA 0x08 /* receive FIFO overflow */ enum ts102_opcode { /* Argument Returned */ TS102_OP_RD_SERIAL_NUM=0x01, /* none ack + 4 bytes */ TS102_OP_RD_ETHER_ADDR=0x02, /* none ack + 6 bytes */ TS102_OP_RD_HW_VERSION=0x03, /* none ack + 2 bytes */ TS102_OP_RD_UCTLR_VERSION=0x04, /* none ack + 2 bytes */ TS102_OP_RD_MAX_TEMP=0x05, /* none ack + 1 bytes */ TS102_OP_RD_MIN_TEMP=0x07, /* none ack + 1 bytes */ TS102_OP_RD_CURRENT_TEMP=0x06, /* none ack + 1 bytes */ TS102_OP_RD_SYSTEM_VARIANT=0x08, /* none ack + 4 bytes */ TS102_OP_RD_POWERON_CYCLES=0x09, /* none ack + 4 bytes */ TS102_OP_RD_POWERON_SECONDS=0x0a, /* none ack + 4 bytes */ TS102_OP_RD_RESET_STATUS=0x0b, /* none ack + 1 bytes */ #define TS102_RESET_STATUS_RESERVED0 0x00 #define TS102_RESET_STATUS_POWERON 0x01 #define TS102_RESET_STATUS_KEYBOARD 0x02 #define TS102_RESET_STATUS_WATCHDOG 0x03 #define TS102_RESET_STATUS_TIMEOUT 0x04 #define TS102_RESET_STATUS_SOFTWARE 0x05 #define TS102_RESET_STATUS_BROWNOUT 0x06 #define TS102_RESET_STATUS_RESERVED1 0x07 TS102_OP_RD_EVENT_STATUS=0x0c, /* none ack + 2 bytes */ #define TS102_EVENT_STATUS_SHUTDOWN_REQUEST 0x0001 #define TS102_EVENT_STATUS_LOW_POWER_WARNING 0x0002 #define TS102_EVENT_STATUS_VERY_LOW_POWER_WARNING 0x0004 #define TS102_EVENT_STATUS_BATT_CHANGED 0x0008 #define TS102_EVENT_STATUS_EXT_KEYBOARD_STATUS_CHANGE 0x0010 #define TS102_EVENT_STATUS_EXT_MOUSE_STATUS_CHANGE 0x0020 #define TS102_EVENT_STATUS_EXTERNAL_VGA_STATUS_CHANGE 0x0040 #define TS102_EVENT_STATUS_LID_STATUS_CHANGE 0x0080 #define TS102_EVENT_STATUS_MICROCONTROLLER_ERROR 0x0100 #define TS102_EVENT_STATUS_RESERVED 0x0200 #define TS102_EVENT_STATUS_EXT_BATT_STATUS_CHANGE 0x0400 #define TS102_EVENT_STATUS_EXT_BATT_CHARGING_STATUS_CHANGE 0x0800 #define TS102_EVENT_STATUS_EXT_BATT_LOW_POWER 0x1000 #define TS102_EVENT_STATUS_DC_STATUS_CHANGE 0x2000 #define TS102_EVENT_STATUS_CHARGING_STATUS_CHANGE 0x4000 #define TS102_EVENT_STATUS_POWERON_BTN_PRESSED 0x8000 TS102_OP_RD_REAL_TIME_CLK=0x0d, /* none ack + 7 bytes */ TS102_OP_RD_EXT_VGA_PORT=0x0e, /* none ack + 1 bytes */ TS102_OP_RD_UCTRL_ROM_CKSUM=0x0f, /* none ack + 2 bytes */ TS102_OP_RD_ERROR_STATUS=0x10, /* none ack + 2 bytes */ #define TS102_ERROR_STATUS_NO_ERROR 0x00 #define TS102_ERROR_STATUS_COMMAND_ERROR 0x01 #define TS102_ERROR_STATUS_EXECUTION_ERROR 0x02 #define TS102_ERROR_STATUS_PHYSICAL_ERROR 0x04 TS102_OP_RD_EXT_STATUS=0x11, /* none ack + 2 bytes */ #define TS102_EXT_STATUS_MAIN_POWER_AVAILABLE 0x0001 #define TS102_EXT_STATUS_INTERNAL_BATTERY_ATTACHED 0x0002 #define TS102_EXT_STATUS_EXTERNAL_BATTERY_ATTACHED 0x0004 #define TS102_EXT_STATUS_EXTERNAL_VGA_ATTACHED 0x0008 #define TS102_EXT_STATUS_EXTERNAL_KEYBOARD_ATTACHED 0x0010 #define TS102_EXT_STATUS_EXTERNAL_MOUSE_ATTACHED 0x0020 #define TS102_EXT_STATUS_LID_DOWN 0x0040 #define TS102_EXT_STATUS_INTERNAL_BATTERY_CHARGING 0x0080 #define TS102_EXT_STATUS_EXTERNAL_BATTERY_CHARGING 0x0100 #define TS102_EXT_STATUS_INTERNAL_BATTERY_DISCHARGING 0x0200 #define TS102_EXT_STATUS_EXTERNAL_BATTERY_DISCHARGING 0x0400 TS102_OP_RD_USER_CONFIG=0x12, /* none ack + 2 bytes */ TS102_OP_RD_UCTRL_VLT=0x13, /* none ack + 1 bytes */ TS102_OP_RD_INT_BATT_VLT=0x14, /* none ack + 1 bytes */ TS102_OP_RD_DC_IN_VLT=0x15, /* none ack + 1 bytes */ TS102_OP_RD_HORZ_PRT_VLT=0x16, /* none ack + 1 bytes */ TS102_OP_RD_VERT_PTR_VLT=0x17, /* none ack + 1 bytes */ TS102_OP_RD_INT_CHANGE_LEVEL=0x18, /* none ack + 1 bytes */ TS102_OP_RD_EXT_CHARGE_LEVEL=0x19, /* none ack + 1 bytes */ TS102_OP_RD_RTC_ALARM=0x1a, /* none ack + 7 bytes */ TS102_OP_RD_EVENT_STATUS_NO_RESET=0x1b, /* none ack + 2 bytes */ TS102_OP_RD_INT_KBD_LAYOUT=0x1c, /* none ack + 2 bytes */ TS102_OP_RD_EXT_KBD_LAYOUT=0x1d, /* none ack + 2 bytes */ TS102_OP_RD_EEPROM_STATUS=0x1e, /* none ack + 2 bytes */ #define TS102_EEPROM_STATUS_FACTORY_AREA_CHECKSUM_FAIL 0x01 #define TS102_EEPROM_STATUS_CONSUMER_AREA_CHECKSUM_FAIL 0x02 #define TS102_EEPROM_STATUS_USER_AREA_CHECKSUM_FAIL 0x04 #define TS102_EEPROM_STATUS_VPD_AREA_CHECKSUM_FAIL 0x08 /* Read/Write/Modify Commands */ TS102_OP_CTL_LCD=0x20, /* mask ack + 2 bytes */ #define TS102_LCD_CAPS_LOCK 0x0001 #define TS102_LCD_SCROLL_LOCK 0x0002 #define TS102_LCD_NUMLOCK 0x0004 #define TS102_LCD_DISK_ACTIVE 0x0008 #define TS102_LCD_LAN_ACTIVE 0x0010 #define TS102_LCD_WAN_ACTIVE 0x0020 #define TS102_LCD_PCMCIA_ACTIVE 0x0040 #define TS102_LCD_DC_OK 0x0080 #define TS102_LCD_COMPOSE 0x0100 TS102_OP_CTL_BITPORT=0x21, /* mask ack + 1 byte */ #define TS102_BITPORT_TFTPWR 0x01 /* TFT power (low) */ #define TS102_BITPORT_SYNCINVA 0x04 /* ext. monitor sync (low) */ #define TS102_BITPORT_SYNCINVB 0x08 /* ext. monitor sync (low) */ #define TS102_BITPORT_BP_DIS 0x10 /* no bootprom from pcmcia (high) */ /* boot from pcmcia (low */ #define TS102_BITPORT_ENCSYNC 0x20 /* enab composite sync (low) */ TS102_OP_CTL_SPEAKER_VOLUME=0x23, /* mask ack + 1 byte */ TS102_OP_CTL_TFT_BIRGHNESS=0x24, /* mask ack + 1 byte */ TS102_OP_CTL_WATCHDOG=0x25, /* mask ack + 1 byte */ TS102_OP_CTL_FCTRY_EEPROM=0x26, /* mask ack + 1 byte */ TS102_OP_CTL_KDB_TIME_UNTL_RTP=0x28, /* mask ack + 1 byte */ TS102_OP_CTL_KBD_TIME_BTWN_RPTS=0x29, /* mask ack + 1 byte */ TS102_OP_CTL_TIMEZONE=0x2a, /* mask ack + 1 byte */ TS102_OP_CTL_MARK_SPACE_RATIO=0x2b, /* mask ack + 1 byte */ TS102_OP_CTL_DIAGNOSTIC_MODE=0x2e, /* mask ack + 1 byte */ #define TS102_DIAGNOSTIC_MODE_CMD_DIAG_ON_LCD 0x01 #define TS102_DIAGNOSTIC_MODE_KDB_MS_9600 0x02 TS102_OP_CTL_SCREEN_CONTRAST=0x2f, /* mask ack + 1 byte */ /* Commands returning no status */ TS102_OP_CMD_RING_BELL=0x30, /* msb,lsb ack */ TS102_OP_CMD_DIAGNOSTIC_STATUS=0x32, /* msb,lsb ack */ TS102_OP_CMD_CLR_KEY_COMBO_TBL=0x33, /* none ack */ TS102_OP_CMD_SOFTWARE_RESET=0x34, /* none ack */ TS102_OP_CMD_SET_RTC=0x35, /* smhddmy ack */ TS102_OP_CMD_RECAL_PTR=0x36, /* none ack */ TS102_OP_CMD_SET_BELL_FREQ=0x37, /* msb,lsb ack */ TS102_OP_CMD_SET_INT_BATT_RATE=0x39, /* charge-lvl ack */ TS102_OP_CMD_SET_EXT_BATT_RATE=0x3a, /* charge-lvl ack */ TS102_OP_CMD_SET_RTC_ALARM=0x3b, /* smhddmy ack */ /* Block transfer commands */ TS102_OP_BLK_RD_EEPROM=0x40, /* len off ack */ TS102_OP_BLK_WR_EEPROM=0x41, /* len off ack */ TS102_OP_BLK_WR_STATUS=0x42, /* len off ack */ TS102_OP_BLK_DEF_SPCL_CHAR=0x43, /* len off ack */ #define TS102_BLK_OFF_DEF_WAN1 0 #define TS102_BLK_OFF_DEF_WAN2 1 #define TS102_BLK_OFF_DEF_LAN1 2 #define TS102_BLK_OFF_DEF_LAN2 3 #define TS102_BLK_OFF_DEF_PCMCIA 4 #define TS102_BLK_OFF_DEF_DC_GOOD 5 #define TS102_BLK_OFF_DEF_BACKSLASH 6 /* Generic commands */ TS102_OP_GEN_DEF_KEY_COMBO_ENT=0x50, /* seq com-length ack */ TS102_OP_GEN_DEF_STRING_TBL_ENT=0x51, /* str-code len ack */ TS102_OP_GEN_DEF_STS_CTRN_DISP=0x52, /* len ack */ /* Generic commands with optional status */ TS102_OP_GEN_STS_EMU_COMMAND=0x64, /* ack */ TS102_OP_GEN_STS_RD_EMU_REGISTER=0x65, /* reg ack + 1 byte */ TS102_OP_GEN_STS_WR_EMU_REGISTER=0x66, /* reg,val ack */ TS102_OP_GEN_STS_RD_EMU_RAM=0x67, /* addr ack + 1 byte */ TS102_OP_GEN_STS_WR_EMU_RAM=0x68, /* addr,val ack */ TS102_OP_GEN_STS_RD_BQ_REGISTER=0x69, /* reg ack + 1 byte */ TS102_OP_GEN_STS_WR_BQ_REGISTER=0x6a, /* reg,val ack */ /* Administration commands */ TS102_OP_ADMIN_SET_USER_PASS=0x70, /* len ack */ TS102_OP_ADMIN_VRFY_USER_PASS=0x71, /* len ack + status */ TS102_OP_ADMIN_GET_SYSTEM_PASS=0x72, /* none ack + <7bytekey> */ TS102_OP_ADMIN_VRFY_SYSTEM_PASS=0x73, /* len ack + status */ TS102_OP_ADMIN_POWER_OFF=0x82, /* len none */ TS102_OP_ADMIN_POWER_RESTART=0x83, /* msb,xx,lsb none */ }; #endif /* _SPARC_DEV_TS102REG_H */