/*	$OpenBSD: zsvar.h,v 1.11 1998/07/21 22:33:44 marc Exp $	*/
/*	$NetBSD: zsvar.h,v 1.10 1997/04/14 21:26:28 pk Exp $ */

/*
 * Copyright (c) 1992, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * This software was developed by the Computer Systems Engineering group
 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
 * contributed to Berkeley.
 *
 * All advertising materials mentioning features or use of this software
 * must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Lawrence Berkeley Laboratory.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)zsvar.h	8.1 (Berkeley) 6/11/93
 */

/*
 * Register layout is machine-dependent...
 */

struct zschan {
	volatile u_char	zc_csr;		/* ctrl,status, and indirect access */
	u_char		zc_xxx0;
	volatile u_char	zc_data;	/* data */
	u_char		zc_xxx1;
};

struct zsdevice {
	struct	zschan zs_chan[2];
};

/*
 * Software state, per zs channel.
 *
 * The zs chip has insufficient buffering, so we provide a software
 * buffer using a two-level interrupt scheme.  The hardware (high priority)
 * interrupt simply grabs the `cause' of the interrupt and stuffs it into
 * a ring buffer.  It then schedules a software interrupt; the latter
 * empties the ring as fast as it can, hoping to avoid overflow.
 *
 * Interrupts can happen because of:
 *	- received data;
 *	- transmit pseudo-DMA done; and
 *	- status change.
 * These are all stored together in the (single) ring.  The size of the
 * ring is a power of two, to make % operations fast.  Since we need two
 * bits to distinguish the interrupt type, and up to 16 for the received
 * data plus RR1 status, we use 32 bits per ring entry.
 *
 * When the value is a character + RR1 status, the character is in the
 * upper 8 bits of the RR1 status.
 */

/* 0 is reserved (means "no interrupt") */
#define	ZRING_RINT	1		/* receive data interrupt */
#define	ZRING_XINT	2		/* transmit done interrupt */
#define	ZRING_SINT	3		/* status change interrupt */

#define	ZRING_TYPE(x)	((x) & 3)
#define	ZRING_VALUE(x)	((x) >> 8)
#define	ZRING_MAKE(t, v)	((t) | (v) << 8)

/* forard decl */
struct zs_softc;

struct zs_chanstate {
	struct	zs_chanstate *cs_next;	/* linked list for zshard() */
	struct	zs_softc *cs_sc;	/* pointer to softc */
	volatile struct zschan *cs_zc;	/* points to hardware regs */
	int	cs_unit;		/* unit number */
	struct	tty *cs_ttyp;		/* ### */

	/*
	 * We must keep a copy of the write registers as they are
	 * mostly write-only and we sometimes need to set and clear
	 * individual bits (e.g., in WR3).  Not all of these are
	 * needed but 16 bytes is cheap and this makes the addressing
	 * simpler.  Unfortunately, we can only write to some registers
	 * when the chip is not actually transmitting, so whenever
	 * we are expecting a `transmit done' interrupt the preg array
	 * is allowed to `get ahead' of the current values.  In a
	 * few places we must change the current value of a register,
	 * rather than (or in addition to) the pending value; for these
	 * cs_creg[] contains the current value.
	 */
	u_char	cs_creg[16];		/* current values */
	u_char	cs_preg[16];		/* pending values */
	u_char	cs_heldchange;		/* change pending (creg != preg) */
	u_char	cs_rr0;			/* last rr0 processed */

	/* pure software data, per channel */
	char	cs_softcar;		/* software carrier */
	char	cs_conk;		/* is console keyboard, decode L1-A */
	char	cs_brkabort;		/* abort (as if via L1-A) on BREAK */
	char	cs_kgdb;		/* enter debugger on frame char */
	char	cs_consio;		/* port does /dev/console I/O */
	char	cs_xxx;			/* (spare) */
	char	cs_deferred_cc;		/* deferred zscnputc() output */
        u_char  cs_cua;                 /* CUA mode flag */
	int	cs_speed;		/* default baud rate (from ROM) */

	/*
	 * The transmit byte count and address are used for pseudo-DMA
	 * output in the hardware interrupt code.  PDMA can be suspended
	 * to get pending changes done; heldtbc is used for this.  It can
	 * also be stopped for ^S; this sets TS_TTSTOP in tp->t_state.
	 */
	int	cs_tbc;			/* transmit byte count */
	caddr_t	cs_tba;			/* transmit buffer address */
	int	cs_heldtbc;		/* held tbc while xmission stopped */

	/*
	 * Printing an overrun error message often takes long enough to
	 * cause another overrun, so we only print one per second.
	 */
	long	cs_rotime;		/* time of last ring overrun */
	long	cs_fotime;		/* time of last fifo overrun */

	/*
	 * The ring buffer.
	 */
	u_int	cs_rbget;		/* ring buffer `get' index */
	volatile u_int cs_rbput;	/* ring buffer `put' index */
	u_int	cs_ringmask;		/* mask, reflecting size of `rbuf' */
	int	*cs_rbuf;		/* type, value pairs */
};

/*
 * N.B.: the keyboard is channel 1, the mouse channel 0; ttyb is 1, ttya
 * is 0.  In other words, the things are BACKWARDS.
 */
#define	ZS_CHAN_A	1
#define	ZS_CHAN_B	0

/*
 * Macros to read and write individual registers (except 0) in a channel.
 *
 * On the SparcStation the 1.6 microsecond recovery time is
 * handled in hardware. On the older Sun4 machine it isn't, and
 * software must deal with the problem.
 *
 * However, it *is* a problem on some Sun4m's (i.e. the SS20) (XXX: why?).
 * Thus we leave in the delay.
 *
 * XXX: (ABB) Think about this more.
 */
#if defined(SUN4)

#define	ZS_READ(c, r)		zs_read(c, r)
#define	ZS_WRITE(c, r, v)	zs_write(c, r, v)
#define	ZS_DELAY()		(CPU_ISSUN4C ? (0) : delay(1))

#else /* SUN4 */

#define	ZS_READ(c, r)		((c)->zc_csr = (r), (c)->zc_csr)
#define	ZS_WRITE(c, r, v)	((c)->zc_csr = (r), (c)->zc_csr = (v))
#define	ZS_DELAY()		(CPU_ISSUN4M ? delay(1) : 0)

#endif /* SUN4 */