/* $OpenBSD: kbd.h,v 1.7 1999/08/21 20:31:39 maja Exp $ */ /* $NetBSD: kbd.h,v 1.6 1996/03/31 22:21:35 pk Exp $ */ /* * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This software was developed by the Computer Systems Engineering group * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and * contributed to Berkeley. * * All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)kbd.h 8.1 (Berkeley) 6/11/93 */ /* * Keyboard `registers'. (This should be called kbd_reg.h but we need to * be compatible.) */ /* * Control codes sent from type 2, 3, and 4 keyboards. * * Note that KBD_RESET is followed by a keyboard ID, while KBD_IDLE is not. * KBD_IDLE does not take the place of any `up' transitions (it merely occurs * after them). */ #define KBD_RESET 0xff /* keyboard `reset' response */ #define KBD_IDLE 0x7f /* keyboard `all keys are up' code */ #define KBD_LAYOUT 0xfe /* keyboard `get layout' response */ /* Keyboard IDs */ #define KB_SUN2 2 /* type 2 keyboard */ #define KB_SUN3 3 /* type 3 keyboard */ #define KB_SUN4 4 /* type 4 keyboard */ /* Key codes are in 0x00..0x7e; KBD_UP is set if the key goes up */ #define KBD_KEYMASK 0x7f /* keyboard key mask */ #define KBD_UP 0x80 /* keyboard `up' transition */ /* Keyboard codes needed to recognize the L1-A sequence */ #define KBD_L1 1 /* keyboard code for `L1' key */ #define KBD_A 77 /* keyboard code for `A' key */ /* Control codes sent to the various keyboards */ #define KBD_CMD_RESET 1 /* reset keyboard */ #define KBD_CMD_BELL 2 /* turn bell on */ #define KBD_CMD_NOBELL 3 /* turn bell off */ #define KBD_CMD_CLICK 10 /* turn keyclick on */ #define KBD_CMD_NOCLICK 11 /* turn keyclick off */ #define KBD_CMD_SETLED 14 /* set LED state (type 4 kbd) */ #define KBD_CMD_GLAYOUT 15 /* get DIP switch (type 4 kbd) */ #define LED_NUM_LOCK 0x1 #define LED_COMPOSE 0x2 #define LED_SCROLL_LOCK 0x4 #define LED_CAPS_LOCK 0x8 #define CAPSLOCK 0 #define SHIFTLOCK 1 #define LEFTSHIFT 2 #define RIGHTSHIFT 3 #define LEFTCTRL 4 #define RIGHTCTRL 5 #define ALTGRAPH 9 #define ALT 10 #define NUMLOCK 11 #define SYSTEMBIT 1 #define SHIFTKEYS 0x100 #define BUCKYBITS 0x200 #define FUNNY 0x300 #define NOP 0x300 #define OOPS 0x301 /* HOLE 0x302 defined in kbio.h */ #define RESET 0x306 #define ERROR 0x307 #define IDLE 0x308 #define COMPOSE 0x309 #define NONL 0x30a #define FA_CLASS 0x400 #define FA_UMLAUT 0x400 #define FA_CFLEX 0x401 #define FA_TILDE 0x402 #define FA_CEDILLA 0x403 #define FA_ACUTE 0x404 #define FA_GRAVE 0x405 #define FA_CLASS_LAST 0x405 #define STRING 0x500 #define KTAB_STRLEN 10 #define HOMEARROW 0x00 #define UPARROW 0x01 #define DOWNARROW 0x02 #define LEFTARROW 0x03 #define RIGHTARROR 0x04 #define FUNCKEYS 0x600 #define LEFTFUNC 0x600 #define RIGHTFUNC 0x610 #define TOPFUNC 0x620 #define BOTTOMFUNC 0x630 #define LF(n) (LEFTFUNC+(n)-1) #define RF(n) (RIGHTFUNC+(n)-1) #define TF(n) (TOPFUNC+(n)-1) #define BF(n) (BOTTOMFUNC+(n)-1) #define PADKEYS 0x700 #define PADEQUAL 0x700 #define PADSLASH 0x701 #define PADSTAR 0x702 #define PADMINUS 0x703 #define PADSEP 0x704 #define PAD7 0x705 #define PAD8 0x706 #define PAD9 0x707 #define PADPLUS 0x708 #define PAD4 0x709 #define PAD5 0x70A #define PAD6 0x70B #define PAD1 0x70C #define PAD2 0x70D #define PAD3 0x70E #define PAD0 0x70F #define PADDOT 0x710 #define PADENTER 0x711 #ifdef _KERNEL void kbd_serial __P((struct tty *, void (*)(struct tty *), void (*)(struct tty *))); void ms_serial __P((struct tty *, void (*)(struct tty *), void (*)(struct tty *))); void kbd_rint __P((int)); void ms_rint __P((int)); void kbd_ascii __P((struct tty *)); int kbd_docmd __P((int, int)); #endif