# $OpenBSD: RAMDISKU1,v 1.10 2004/09/21 19:39:44 drahn Exp $ # Machine architecture; required by config(8) machine sparc64 option SUN4U # maxusers means mostly "let's get small" in terms of kernel malloc's maxusers 2 option RAMDISK_HOOKS option MINIROOTSIZE=6144 #option DDB # need this to see what's happening option TIMEZONE=0 # time zone to adjust RTC time by option DST=0 # daylight saving time used by RTC option SMALL_KERNEL option NO_PROPOLICE #option DIAGNOSTIC # internal consistency checks option FFS # UFS #option NFSCLIENT # Network File System client #option CD9660 # ISO 9660 + Rock Ridge file system option INET # IP + ICMP + TCP + UDP option BOOT_CONFIG # add support for boot -c # Generic swap; second partition of root disk or network. config bsd root on rd0a # Main bus and CPU .. all systems. mainbus0 at root cpu0 at mainbus0 # Bus types found on SPARC systems. sbus* at mainbus0 # Ultra 1 clock* at sbus? # Mostek clock timer* at mainbus0 # Timer chip ## PROM console driver -- if all else fails pcons0 at mainbus0 # PROM console le* at sbus? # Lance Ethernet - AMD7990 ledma* at sbus? le* at ledma? lebuffer* at sbus? le* at lebuffer? #qec* at sbus? # Quad-ethernet #qe* at qec? #be* at qec? hme* at sbus? # # Note the flags on the esp entries below, that work around # deficiencies in the current driver: # bits 0-7: disable disconnect/reselect for the corresponding target # bits 8-15: disable synch negotiation for target [bit-8] # Note: targets 4-7 have disconnect/reselect enabled on the premise # that tape devices normally have one of these targets. Tape # devices should be allowed to disconnect for the SCSI bus # to operate acceptably. # dma* at sbus? # SBus esp* at dma? flags 0x0000 # SBus esp* at sbus? scsibus* at esp? # These entries find devices on all SCSI busses and assign # unit numers dynamically. sd* at scsibus? # SCSI disks #cd* at scsibus? # SCSI CD-ROMs # Media Independent Interface (mii) drivers) nsphy* at mii? # NS and compatible PHYs qsphy* at mii? # Quality Semi QS6612 PHYs ukphy* at mii? # Unknown PHYs pseudo-device rd 2 # ramdisk pseudo-device loop 1 # network loopback