/* $OpenBSD: ifb.c,v 1.19 2010/07/20 20:47:17 miod Exp $ */ /* * Copyright (c) 2007, 2008, 2009 Miodrag Vallat. * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* * Least-effort driver for the Sun Expert3D cards (based on the * ``Wildcat'' chips). * * There is no public documentation for these chips available. * Since they are no longer supported by 3DLabs (which got bought by * Creative), and Sun does not want to publish even minimal information * or source code, the best we can do is experiment. * * Quoting Alan Coopersmith in * http://mail.opensolaris.org/pipermail/opensolaris-discuss/2005-December/011885.html * ``Unfortunately, the lawyers have asked we not give details about why * specific components are not being released.'' */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef APERTURE extern int allowaperture; #endif /* * Parts of the following hardware knowledge come from David S. Miller's * XVR-500 Linux driver (drivers/video/sunxvr500.c). */ /* * The Expert3D and Expert3d-Lite cards are built around the Wildcat * 5110, 6210 and 7210 chips. * * The card exposes the following resources: * - a 32MB aperture window in which views to the different frame buffer * areas can be mapped, in the first BAR. * - a 64KB or 128KB PROM and registers area, in the second BAR. * - a 8MB ``direct burst'' memory mapping, in the third BAR. * * The location of this BAR range is pointed to by a board-specific PCI * configuration register. * * In the state the PROM leaves us in, the 8MB frame buffer windows map * the video memory as interleaved stripes, of which the non-visible parts * can still be addressed (probably for fast screen switching). * * Unfortunately, since we do not know how to reconfigure the stripes * to provide at least a linear frame buffer, we have to write to both * windows and have them provide the complete image. * * Moreover, high pixel values in the overlay planes (such as 0xff or 0xfe) * seem to enable other planes with random contents, so we'll limit ourselves * to 7bpp operation. */ /* * The Fcode driver sets up a communication structure, allowing third-party * code to reprogram the video mode while still allowing the Fcode routines * to access the overlay planes. * * We'll use this information as well, although so far it's unlikely * any code will do so, as long as the only documentation for this * hardware amounts to zilch. */ /* probably some form of signature */ #define IFB_SHARED_SIGNATURE 0x00 #define SIG_IFB 0x09209911 #define SIG_JFB 0x05140213 #define IFB_SHARED_MONITOR_MODE 0x10 #define IFB_SHARED_WIDTH 0x14 #define IFB_SHARED_HEIGHT 0x18 #define IFB_SHARED_V_FREQ 0x1c #define IFB_SHARED_TIMING_H_FP 0x20 #define IFB_SHARED_TIMING_H_SYNC 0x24 #define IFB_SHARED_TIMING_H_BP 0x28 #define IFB_SHARED_TIMING_V_FP 0x2c #define IFB_SHARED_TIMING_V_SYNC 0x30 #define IFB_SHARED_TIMING_V_BP 0x34 #define IFB_SHARED_TIMING_FLAGS 0x38 #define IFB_SHARED_CMAP_DIRTY 0x3c #define IFB_SHARED_TERM8_GSR 0x4c #define IFB_SHARED_TERM8_SPR 0x50 #define IFB_SHARED_TERM8_SPLR 0x54 /* * The Expert3D has an extra BAR that is not present on the -Lite * version. This register contains bits that tell us how many BARs to * skip before we get to the BARs that interest us. */ #define IFB_PCI_CFG 0x5c #define IFB_PCI_CFG_BAR_OFFSET(x) ((x & 0x000000e0) >> 3) /* * 6000 (jfb) / 8000 (ifb) engine command * This register is used to issue (some) commands sequences to the * acceleration hardware. */ #define JFB_REG_ENGINE 0x6000 #define IFB_REG_ENGINE 0x8000 /* * 8040 component configuration * This register controls which parts of the board will be addressed by * writes to other configuration registers. * Apparently the low two bytes control the frame buffer windows for the * given head (starting at 1). * The high two bytes are texture related. */ #define IFB_REG_COMPONENT_SELECT 0x8040 /* * 8044 status * This register has a bit that signals completion of commands issued * to the acceleration hardware. */ #define IFB_REG_STATUS 0x8044 #define IFB_REG_STATUS_DONE 0x00000004 /* * 8058 magnifying configuration * This register apparently controls magnifying. * bits 5-6 select the window width divider (00: by 2, 01: by 4, 10: by 8, * 11: by 16) * bits 7-8 select the zoom factor (00: disabled, 01: x2, 10: x4, 11: x8) */ #define IFB_REG_MAGNIFY 0x8058 #define IFB_REG_MAGNIFY_DISABLE 0x00000000 #define IFB_REG_MAGNIFY_X2 0x00000040 #define IFB_REG_MAGNIFY_X4 0x00000080 #define IFB_REG_MAGNIFY_X8 0x000000c0 #define IFB_REG_MAGNIFY_WINDIV2 0x00000000 #define IFB_REG_MAGNIFY_WINDIV4 0x00000010 #define IFB_REG_MAGNIFY_WINDIV8 0x00000020 #define IFB_REG_MAGNIFY_WINDIV16 0x00000030 /* * 8070 display resolution * Contains the size of the display, as ((height - 1) << 16) | (width - 1) */ #define IFB_REG_RESOLUTION 0x8070 /* * 8074 configuration register * Contains 0x1a000088 | ((Log2 stride) << 16) */ #define IFB_REG_CONFIG 0x8074 /* * 8078 32bit frame buffer window #0 (8 to 9 MB) * Contains the offset (relative to BAR0) of the 32 bit frame buffer window. */ #define IFB_REG_FB32_0 0x8078 /* * 807c 32bit frame buffer window #1 (8 to 9 MB) * Contains the offset (relative to BAR0) of the 32 bit frame buffer window. */ #define IFB_REG_FB32_1 0x807c /* * 8080 8bit frame buffer window #0 (2 to 2.2 MB) * Contains the offset (relative to BAR0) of the 8 bit frame buffer window. */ #define IFB_REG_FB8_0 0x8080 /* * 8084 8bit frame buffer window #1 (2 to 2.2 MB) * Contains the offset (relative to BAR0) of the 8 bit frame buffer window. */ #define IFB_REG_FB8_1 0x8084 /* * 8088 unknown window (as large as a 32 bit frame buffer) */ #define IFB_REG_FB_UNK0 0x8088 /* * 808c unknown window (as large as a 8 bit frame buffer) */ #define IFB_REG_FB_UNK1 0x808c /* * 8090 unknown window (as large as a 8 bit frame buffer) */ #define IFB_REG_FB_UNK2 0x8090 /* * 80bc RAMDAC palette index register */ #define IFB_REG_CMAP_INDEX 0x80bc /* * 80c0 RAMDAC palette data register */ #define IFB_REG_CMAP_DATA 0x80c0 /* * 80e4 DPMS state register * States ``off'' and ``suspend'' need chip reprogramming before video can * be enabled again. */ #define IFB_REG_DPMS_STATE 0x80e4 #define IFB_REG_DPMS_OFF 0x00000000 #define IFB_REG_DPMS_SUSPEND 0x00000001 #define IFB_REG_DPMS_STANDBY 0x00000002 #define IFB_REG_DPMS_ON 0x00000003 /* * (some) ROP codes */ #define IFB_ROP_CLEAR 0x00000000 /* clear bits in rop mask */ #define IFB_ROP_SRC 0x00330000 /* copy src bits matching rop mask */ #define IFB_ROP_XOR 0x00cc0000 /* xor src bits with rop mask */ #define IFB_ROP_SET 0x00ff0000 /* set bits in rop mask */ #define IFB_COORDS(x, y) ((x) | (y) << 16) /* blitter directions */ #define IFB_BLT_DIR_BACKWARDS_Y (0x08 | 0x02) #define IFB_BLT_DIR_BACKWARDS_X (0x04 | 0x01) #define IFB_PIXELMASK 0x7f /* 7bpp */ struct ifb_softc { struct sunfb sc_sunfb; bus_space_tag_t sc_mem_t; pcitag_t sc_pcitag; /* overlays mappings */ bus_space_handle_t sc_mem_h; bus_addr_t sc_membase, sc_fb8bank0_base, sc_fb8bank1_base; bus_size_t sc_memlen; vaddr_t sc_memvaddr, sc_fb8bank0_vaddr, sc_fb8bank1_vaddr; /* registers mapping */ bus_space_handle_t sc_reg_h; bus_addr_t sc_regbase; bus_size_t sc_reglen; /* communication area */ volatile uint32_t *sc_comm; /* acceleration information */ u_int sc_acceltype; #define IFB_ACCEL_NONE 0 #define IFB_ACCEL_IFB 1 /* Expert3D style */ #define IFB_ACCEL_JFB 2 /* XVR-500 style */ void (*sc_rop)(void *, int, int, int, int, int, int, uint32_t, int32_t); /* wsdisplay related goo */ u_int sc_mode; struct wsdisplay_emulops sc_old_ops; u_int8_t sc_cmap_red[256]; u_int8_t sc_cmap_green[256]; u_int8_t sc_cmap_blue[256]; }; int ifb_ioctl(void *, u_long, caddr_t, int, struct proc *); paddr_t ifb_mmap(void *, off_t, int); void ifb_burner(void *, u_int, u_int); struct wsdisplay_accessops ifb_accessops = { ifb_ioctl, ifb_mmap, NULL, /* alloc_screen */ NULL, /* free_screen */ NULL, /* show_screen */ NULL, /* load_font */ NULL, /* scrollback */ NULL, /* getchar */ ifb_burner, NULL /* pollc */ }; int ifbmatch(struct device *, void *, void *); void ifbattach(struct device *, struct device *, void *); struct cfattach ifb_ca = { sizeof (struct ifb_softc), ifbmatch, ifbattach }; struct cfdriver ifb_cd = { NULL, "ifb", DV_DULL }; int ifb_accel_identify(const char *); static inline u_int ifb_dac_value(u_int, u_int, u_int); int ifb_getcmap(struct ifb_softc *, struct wsdisplay_cmap *); static inline int ifb_is_console(int); int ifb_mapregs(struct ifb_softc *, struct pci_attach_args *); int ifb_putcmap(struct ifb_softc *, struct wsdisplay_cmap *); void ifb_setcolor(void *, u_int, u_int8_t, u_int8_t, u_int8_t); void ifb_setcolormap(struct sunfb *, void (*)(void *, u_int, u_int8_t, u_int8_t, u_int8_t)); void ifb_copyrect(struct ifb_softc *, int, int, int, int, int, int); void ifb_fillrect(struct ifb_softc *, int, int, int, int, int); static inline void ifb_rop(struct ifb_softc *, int, int, int, int, int, int, uint32_t, int32_t); void ifb_rop_common(struct ifb_softc *, bus_addr_t, int, int, int, int, int, int, uint32_t, int32_t); void ifb_rop_ifb(void *, int, int, int, int, int, int, uint32_t, int32_t); void ifb_rop_jfb(void *, int, int, int, int, int, int, uint32_t, int32_t); int ifb_rop_wait(struct ifb_softc *); int ifb_putchar_dumb(void *, int, int, u_int, long); int ifb_copycols_dumb(void *, int, int, int, int); int ifb_erasecols_dumb(void *, int, int, int, long); int ifb_copyrows_dumb(void *, int, int, int); int ifb_eraserows_dumb(void *, int, int, long); int ifb_do_cursor_dumb(struct rasops_info *); int ifb_putchar(void *, int, int, u_int, long); int ifb_copycols(void *, int, int, int, int); int ifb_erasecols(void *, int, int, int, long); int ifb_copyrows(void *, int, int, int); int ifb_eraserows(void *, int, int, long); int ifb_do_cursor(struct rasops_info *); int ifbmatch(struct device *parent, void *cf, void *aux) { return ifb_ident(aux); } void ifbattach(struct device *parent, struct device *self, void *aux) { struct ifb_softc *sc = (struct ifb_softc *)self; struct pci_attach_args *paa = aux; struct rasops_info *ri; uint32_t dev_comm; int node, console; char *name, *text; sc->sc_mem_t = paa->pa_memt; sc->sc_pcitag = paa->pa_tag; node = PCITAG_NODE(paa->pa_tag); console = ifb_is_console(node); printf("\n"); /* * Multiple heads appear as PCI subfunctions. * However, the ofw node for it lacks most properties, * and its BAR only give access to registers, not * frame buffer memory. */ if (!node_has_property(node, "device_type")) { printf("%s: secondary output not supported yet\n", self->dv_xname); return; } /* * Describe the beast. */ name = text = getpropstring(node, "name"); if (strncmp(text, "SUNW,", 5) == 0) text += 5; printf("%s: %s", self->dv_xname, text); text = getpropstring(node, "model"); if (*text != '\0') printf(" (%s)", text); if (ifb_mapregs(sc, paa)) return; sc->sc_fb8bank0_base = bus_space_read_4(sc->sc_mem_t, sc->sc_reg_h, IFB_REG_FB8_0); sc->sc_fb8bank1_base = bus_space_read_4(sc->sc_mem_t, sc->sc_reg_h, IFB_REG_FB8_1); sc->sc_memvaddr = (vaddr_t)bus_space_vaddr(sc->sc_mem_t, sc->sc_mem_h); sc->sc_fb8bank0_vaddr = sc->sc_memvaddr + sc->sc_fb8bank0_base - sc->sc_membase; sc->sc_fb8bank1_vaddr = sc->sc_memvaddr + sc->sc_fb8bank1_base - sc->sc_membase; /* * The values stored into the node properties might have been * modified since the Fcode was last run. Pick the geometry * information from the configuration registers instead. * This replaces fb_setsize(&sc->sc_sunfb, 8, 1152, 900, node, 0); */ sc->sc_sunfb.sf_width = (bus_space_read_4(sc->sc_mem_t, sc->sc_reg_h, IFB_REG_RESOLUTION) & 0xffff) + 1; sc->sc_sunfb.sf_height = (bus_space_read_4(sc->sc_mem_t, sc->sc_reg_h, IFB_REG_RESOLUTION) >> 16) + 1; sc->sc_sunfb.sf_depth = 8; sc->sc_sunfb.sf_linebytes = 1 << (bus_space_read_4(sc->sc_mem_t, sc->sc_reg_h, IFB_REG_CONFIG) >> 16); sc->sc_sunfb.sf_fbsize = sc->sc_sunfb.sf_height * sc->sc_sunfb.sf_linebytes; printf(", %dx%d\n", sc->sc_sunfb.sf_width, sc->sc_sunfb.sf_height); ri = &sc->sc_sunfb.sf_ro; ri->ri_bits = NULL; ri->ri_hw = sc; fbwscons_init(&sc->sc_sunfb, RI_BSWAP, console); /* * Find out what flavour of ifb we are... */ sc->sc_acceltype = ifb_accel_identify(name); switch (sc->sc_acceltype) { case IFB_ACCEL_IFB: sc->sc_rop = ifb_rop_ifb; break; case IFB_ACCEL_JFB: /* * Remember the address of the communication area */ if (OF_getprop(node, "dev-comm", &dev_comm, sizeof dev_comm) != -1) { sc->sc_comm = (volatile uint32_t *)(vaddr_t)dev_comm; } sc->sc_rop = ifb_rop_jfb; break; } /* * Clear the unwanted pixel planes: all if non console (thus * white background), and all planes above 7bpp otherwise. * This also allows to check whether the accelerated code works, * or not. */ if (sc->sc_acceltype != IFB_ACCEL_NONE) { ifb_rop(sc, 0, 0, 0, 0, sc->sc_sunfb.sf_width, sc->sc_sunfb.sf_height, IFB_ROP_CLEAR, console ? ~IFB_PIXELMASK : ~0); if (ifb_rop_wait(sc) == 0) { /* fall back to dumb software operation */ sc->sc_acceltype = IFB_ACCEL_NONE; } } if (sc->sc_acceltype == IFB_ACCEL_NONE) { /* due to the way we will handle updates */ ri->ri_flg &= ~RI_FULLCLEAR; if (!console) { bzero((void *)sc->sc_fb8bank0_vaddr, sc->sc_sunfb.sf_fbsize); bzero((void *)sc->sc_fb8bank1_vaddr, sc->sc_sunfb.sf_fbsize); } } /* pick centering delta */ sc->sc_fb8bank0_vaddr += ri->ri_bits - ri->ri_origbits; sc->sc_fb8bank1_vaddr += ri->ri_bits - ri->ri_origbits; sc->sc_old_ops = ri->ri_ops; /* structure copy */ if (sc->sc_acceltype != IFB_ACCEL_NONE) { ri->ri_ops.copyrows = ifb_copyrows; ri->ri_ops.copycols = ifb_copycols; ri->ri_ops.eraserows = ifb_eraserows; ri->ri_ops.erasecols = ifb_erasecols; ri->ri_ops.putchar = ifb_putchar_dumb; ri->ri_do_cursor = ifb_do_cursor; } else { ri->ri_ops.copyrows = ifb_copyrows_dumb; ri->ri_ops.copycols = ifb_copycols_dumb; ri->ri_ops.eraserows = ifb_eraserows_dumb; ri->ri_ops.erasecols = ifb_erasecols_dumb; ri->ri_ops.putchar = ifb_putchar_dumb; ri->ri_do_cursor = ifb_do_cursor_dumb; } ifb_setcolormap(&sc->sc_sunfb, ifb_setcolor); sc->sc_mode = WSDISPLAYIO_MODE_EMUL; if (console) fbwscons_console_init(&sc->sc_sunfb, -1); fbwscons_attach(&sc->sc_sunfb, &ifb_accessops, console); } /* * Attempt to identify what kind of ifb we are talking to, so as to setup * proper acceleration information. */ int ifb_accel_identify(const char *name) { if (strcmp(name, "SUNW,Expert3D") == 0 || strcmp(name, "SUNW,Expert3D-Lite") == 0) return IFB_ACCEL_IFB; if (strcmp(name, "SUNW,XVR-1200") == 0) return IFB_ACCEL_JFB; /* XVR-500 is bobcat, XVR-600 is xvr600 */ return IFB_ACCEL_NONE; } int ifb_ioctl(void *v, u_long cmd, caddr_t data, int flags, struct proc *p) { struct ifb_softc *sc = v; struct wsdisplay_fbinfo *wdf; struct pcisel *sel; int mode; switch (cmd) { case WSDISPLAYIO_GTYPE: *(u_int *)data = WSDISPLAY_TYPE_IFB; break; case WSDISPLAYIO_SMODE: mode = *(u_int *)data; if (mode == WSDISPLAYIO_MODE_EMUL) ifb_setcolormap(&sc->sc_sunfb, ifb_setcolor); sc->sc_mode = mode; break; case WSDISPLAYIO_GINFO: wdf = (void *)data; wdf->height = sc->sc_sunfb.sf_height; wdf->width = sc->sc_sunfb.sf_width; wdf->depth = sc->sc_sunfb.sf_depth; wdf->cmsize = 256; break; case WSDISPLAYIO_LINEBYTES: *(u_int *)data = sc->sc_sunfb.sf_linebytes; break; case WSDISPLAYIO_GETCMAP: return ifb_getcmap(sc, (struct wsdisplay_cmap *)data); case WSDISPLAYIO_PUTCMAP: return ifb_putcmap(sc, (struct wsdisplay_cmap *)data); case WSDISPLAYIO_GPCIID: sel = (struct pcisel *)data; sel->pc_bus = PCITAG_BUS(sc->sc_pcitag); sel->pc_dev = PCITAG_DEV(sc->sc_pcitag); sel->pc_func = PCITAG_FUN(sc->sc_pcitag); break; case WSDISPLAYIO_SVIDEO: case WSDISPLAYIO_GVIDEO: break; case WSDISPLAYIO_GCURPOS: case WSDISPLAYIO_SCURPOS: case WSDISPLAYIO_GCURMAX: case WSDISPLAYIO_GCURSOR: case WSDISPLAYIO_SCURSOR: default: return -1; /* not supported yet */ } return 0; } static inline u_int ifb_dac_value(u_int r, u_int g, u_int b) { /* * Convert 8 bit values to 10 bit scale, by shifting and inserting * the former high bits in the low two bits. * Simply shifting is sligthly too dull. */ r = (r << 2) | (r >> 6); g = (g << 2) | (g >> 6); b = (b << 2) | (b >> 6); return (b << 20) | (g << 10) | r; } int ifb_getcmap(struct ifb_softc *sc, struct wsdisplay_cmap *cm) { u_int index = cm->index; u_int count = cm->count; int error; if (index >= 256 || count > 256 - index) return EINVAL; error = copyout(&sc->sc_cmap_red[index], cm->red, count); if (error) return error; error = copyout(&sc->sc_cmap_green[index], cm->green, count); if (error) return error; error = copyout(&sc->sc_cmap_blue[index], cm->blue, count); if (error) return error; return 0; } int ifb_putcmap(struct ifb_softc *sc, struct wsdisplay_cmap *cm) { u_int index = cm->index; u_int count = cm->count; u_int i; int error; u_char *r, *g, *b; if (index >= 256 || count > 256 - index) return EINVAL; if ((error = copyin(cm->red, &sc->sc_cmap_red[index], count)) != 0) return error; if ((error = copyin(cm->green, &sc->sc_cmap_green[index], count)) != 0) return error; if ((error = copyin(cm->blue, &sc->sc_cmap_blue[index], count)) != 0) return error; r = &sc->sc_cmap_red[index]; g = &sc->sc_cmap_green[index]; b = &sc->sc_cmap_blue[index]; for (i = 0; i < count; i++) { bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, IFB_REG_CMAP_INDEX, index); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, IFB_REG_CMAP_DATA, ifb_dac_value(*r, *g, *b)); r++, g++, b++, index++; } return 0; } void ifb_setcolor(void *v, u_int index, u_int8_t r, u_int8_t g, u_int8_t b) { struct ifb_softc *sc = v; sc->sc_cmap_red[index] = r; sc->sc_cmap_green[index] = g; sc->sc_cmap_blue[index] = b; bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, IFB_REG_CMAP_INDEX, index); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, IFB_REG_CMAP_DATA, ifb_dac_value(r, g, b)); } /* similar in spirit to fbwscons_setcolormap() */ void ifb_setcolormap(struct sunfb *sf, void (*setcolor)(void *, u_int, u_int8_t, u_int8_t, u_int8_t)) { struct rasops_info *ri = &sf->sf_ro; int i; const u_char *color; /* * Compensate for overlay plane limitations. Since we'll operate * in 7bpp mode, our basic colors will use positions 00 to 0f, * and the inverted colors will use positions 7f to 70. */ for (i = 0x00; i < 0x10; i++) { color = &rasops_cmap[i * 3]; setcolor(sf, i, color[0], color[1], color[2]); } for (i = 0x70; i < 0x80; i++) { color = &rasops_cmap[(0xf0 | i) * 3]; setcolor(sf, i, color[0], color[1], color[2]); } /* * Proper operation apparently needs black to be 01, always. * Replace black, red and white with white, black and red. * Kind of ugly, but it works. */ ri->ri_devcmap[WSCOL_WHITE] = 0x00000000; ri->ri_devcmap[WSCOL_BLACK] = 0x01010101; ri->ri_devcmap[WSCOL_RED] = 0x07070707; color = &rasops_cmap[(WSCOL_WHITE + 8) * 3]; /* real white */ setcolor(sf, 0, color[0], color[1], color[2]); setcolor(sf, IFB_PIXELMASK ^ 0, ~color[0], ~color[1], ~color[2]); color = &rasops_cmap[WSCOL_BLACK * 3]; setcolor(sf, 1, color[0], color[1], color[2]); setcolor(sf, IFB_PIXELMASK ^ 1, ~color[0], ~color[1], ~color[2]); color = &rasops_cmap[WSCOL_RED * 3]; setcolor(sf, 7, color[0], color[1], color[2]); setcolor(sf, IFB_PIXELMASK ^ 7, ~color[0], ~color[1], ~color[2]); } paddr_t ifb_mmap(void *v, off_t off, int prot) { struct ifb_softc *sc = (struct ifb_softc *)v; switch (sc->sc_mode) { case WSDISPLAYIO_MODE_MAPPED: /* * In mapped mode, provide access to the two overlays, * followed by the control registers, at the following * addresses: * 00000000 overlay 0, size up to 2MB (visible fb size) * 01000000 overlay 1, size up to 2MB (visible fb size) * 02000000 control registers */ off -= 0x00000000; if (off >= 0 && off < round_page(sc->sc_sunfb.sf_fbsize)) { return bus_space_mmap(sc->sc_mem_t, sc->sc_fb8bank0_base, off, prot, BUS_SPACE_MAP_LINEAR); } off -= 0x01000000; if (off >= 0 && off < round_page(sc->sc_sunfb.sf_fbsize)) { return bus_space_mmap(sc->sc_mem_t, sc->sc_fb8bank1_base, off, prot, BUS_SPACE_MAP_LINEAR); } #ifdef APERTURE off -= 0x01000000; if (allowaperture != 0 && sc->sc_acceltype != IFB_ACCEL_NONE) { if (off >= 0 && off < round_page(sc->sc_reglen)) { return bus_space_mmap(sc->sc_mem_t, sc->sc_regbase, off, prot, BUS_SPACE_MAP_LINEAR); } } #endif break; } return -1; } void ifb_burner(void *v, u_int on, u_int flags) { struct ifb_softc *sc = (struct ifb_softc *)v; int s; uint32_t dpms; s = splhigh(); if (on) dpms = IFB_REG_DPMS_ON; else { #ifdef notyet if (flags & WSDISPLAY_BURN_VBLANK) dpms = IFB_REG_DPMS_SUSPEND; else #endif dpms = IFB_REG_DPMS_STANDBY; } bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, IFB_REG_DPMS_STATE, dpms); splx(s); } static inline int ifb_is_console(int node) { extern int fbnode; return fbnode == node; } int ifb_mapregs(struct ifb_softc *sc, struct pci_attach_args *pa) { u_int32_t cf; int bar, rc; cf = pci_conf_read(pa->pa_pc, pa->pa_tag, IFB_PCI_CFG); bar = PCI_MAPREG_START + IFB_PCI_CFG_BAR_OFFSET(cf); cf = pci_conf_read(pa->pa_pc, pa->pa_tag, bar); if (PCI_MAPREG_TYPE(cf) == PCI_MAPREG_TYPE_IO) rc = EINVAL; else { rc = pci_mapreg_map(pa, bar, cf, BUS_SPACE_MAP_LINEAR, NULL, &sc->sc_mem_h, &sc->sc_membase, &sc->sc_memlen, 0); } if (rc != 0) { printf("\n%s: can't map video memory\n", sc->sc_sunfb.sf_dev.dv_xname); return rc; } cf = pci_conf_read(pa->pa_pc, pa->pa_tag, bar + 4); if (PCI_MAPREG_TYPE(cf) == PCI_MAPREG_TYPE_IO) rc = EINVAL; else { rc = pci_mapreg_map(pa, bar + 4, cf, 0, NULL, &sc->sc_reg_h, &sc->sc_regbase, &sc->sc_reglen, 0x9000); } if (rc != 0) { printf("\n%s: can't map register space\n", sc->sc_sunfb.sf_dev.dv_xname); return rc; } return 0; } /* * Non accelerated routines. */ int ifb_putchar_dumb(void *cookie, int row, int col, u_int uc, long attr) { struct rasops_info *ri = cookie; struct ifb_softc *sc = ri->ri_hw; ri->ri_bits = (void *)sc->sc_fb8bank0_vaddr; sc->sc_old_ops.putchar(cookie, row, col, uc, attr); ri->ri_bits = (void *)sc->sc_fb8bank1_vaddr; sc->sc_old_ops.putchar(cookie, row, col, uc, attr); return 0; } int ifb_copycols_dumb(void *cookie, int row, int src, int dst, int num) { struct rasops_info *ri = cookie; struct ifb_softc *sc = ri->ri_hw; ri->ri_bits = (void *)sc->sc_fb8bank0_vaddr; sc->sc_old_ops.copycols(cookie, row, src, dst, num); ri->ri_bits = (void *)sc->sc_fb8bank1_vaddr; sc->sc_old_ops.copycols(cookie, row, src, dst, num); return 0; } int ifb_erasecols_dumb(void *cookie, int row, int col, int num, long attr) { struct rasops_info *ri = cookie; struct ifb_softc *sc = ri->ri_hw; ri->ri_bits = (void *)sc->sc_fb8bank0_vaddr; sc->sc_old_ops.erasecols(cookie, row, col, num, attr); ri->ri_bits = (void *)sc->sc_fb8bank1_vaddr; sc->sc_old_ops.erasecols(cookie, row, col, num, attr); return 0; } int ifb_copyrows_dumb(void *cookie, int src, int dst, int num) { struct rasops_info *ri = cookie; struct ifb_softc *sc = ri->ri_hw; ri->ri_bits = (void *)sc->sc_fb8bank0_vaddr; sc->sc_old_ops.copyrows(cookie, src, dst, num); ri->ri_bits = (void *)sc->sc_fb8bank1_vaddr; sc->sc_old_ops.copyrows(cookie, src, dst, num); return 0; } int ifb_eraserows_dumb(void *cookie, int row, int num, long attr) { struct rasops_info *ri = cookie; struct ifb_softc *sc = ri->ri_hw; ri->ri_bits = (void *)sc->sc_fb8bank0_vaddr; sc->sc_old_ops.eraserows(cookie, row, num, attr); ri->ri_bits = (void *)sc->sc_fb8bank1_vaddr; sc->sc_old_ops.eraserows(cookie, row, num, attr); return 0; } /* Similar to rasops_do_cursor(), but using a 7bit pixel mask. */ #define CURSOR_MASK 0x7f7f7f7f int ifb_do_cursor_dumb(struct rasops_info *ri) { struct ifb_softc *sc = ri->ri_hw; int full1, height, cnt, slop1, slop2, row, col; int ovl_offset = sc->sc_fb8bank1_vaddr - sc->sc_fb8bank0_vaddr; u_char *dp0, *dp1, *rp; row = ri->ri_crow; col = ri->ri_ccol; ri->ri_bits = (void *)sc->sc_fb8bank0_vaddr; rp = ri->ri_bits + row * ri->ri_yscale + col * ri->ri_xscale; height = ri->ri_font->fontheight; slop1 = (4 - ((long)rp & 3)) & 3; if (slop1 > ri->ri_xscale) slop1 = ri->ri_xscale; slop2 = (ri->ri_xscale - slop1) & 3; full1 = (ri->ri_xscale - slop1 - slop2) >> 2; if ((slop1 | slop2) == 0) { /* A common case */ while (height--) { dp0 = rp; dp1 = dp0 + ovl_offset; rp += ri->ri_stride; for (cnt = full1; cnt; cnt--) { *(int32_t *)dp0 ^= CURSOR_MASK; *(int32_t *)dp1 ^= CURSOR_MASK; dp0 += 4; dp1 += 4; } } } else { /* XXX this is stupid.. use masks instead */ while (height--) { dp0 = rp; dp1 = dp0 + ovl_offset; rp += ri->ri_stride; if (slop1 & 1) { *dp0++ ^= (u_char)CURSOR_MASK; *dp1++ ^= (u_char)CURSOR_MASK; } if (slop1 & 2) { *(int16_t *)dp0 ^= (int16_t)CURSOR_MASK; *(int16_t *)dp1 ^= (int16_t)CURSOR_MASK; dp0 += 2; dp1 += 2; } for (cnt = full1; cnt; cnt--) { *(int32_t *)dp0 ^= CURSOR_MASK; *(int32_t *)dp1 ^= CURSOR_MASK; dp0 += 4; dp1 += 4; } if (slop2 & 1) { *dp0++ ^= (u_char)CURSOR_MASK; *dp1++ ^= (u_char)CURSOR_MASK; } if (slop2 & 2) { *(int16_t *)dp0 ^= (int16_t)CURSOR_MASK; *(int16_t *)dp1 ^= (int16_t)CURSOR_MASK; } } } return 0; } /* * Accelerated routines. */ int ifb_copycols(void *cookie, int row, int src, int dst, int num) { struct rasops_info *ri = cookie; struct ifb_softc *sc = ri->ri_hw; num *= ri->ri_font->fontwidth; src *= ri->ri_font->fontwidth; dst *= ri->ri_font->fontwidth; row *= ri->ri_font->fontheight; ifb_copyrect(sc, ri->ri_xorigin + src, ri->ri_yorigin + row, ri->ri_xorigin + dst, ri->ri_yorigin + row, num, ri->ri_font->fontheight); return 0; } int ifb_erasecols(void *cookie, int row, int col, int num, long attr) { struct rasops_info *ri = cookie; struct ifb_softc *sc = ri->ri_hw; int bg, fg; ri->ri_ops.unpack_attr(cookie, attr, &fg, &bg, NULL); row *= ri->ri_font->fontheight; col *= ri->ri_font->fontwidth; num *= ri->ri_font->fontwidth; ifb_fillrect(sc, ri->ri_xorigin + col, ri->ri_yorigin + row, num, ri->ri_font->fontheight, ri->ri_devcmap[bg]); return 0; } int ifb_copyrows(void *cookie, int src, int dst, int num) { struct rasops_info *ri = cookie; struct ifb_softc *sc = ri->ri_hw; num *= ri->ri_font->fontheight; src *= ri->ri_font->fontheight; dst *= ri->ri_font->fontheight; ifb_copyrect(sc, ri->ri_xorigin, ri->ri_yorigin + src, ri->ri_xorigin, ri->ri_yorigin + dst, ri->ri_emuwidth, num); return 0; } int ifb_eraserows(void *cookie, int row, int num, long attr) { struct rasops_info *ri = cookie; struct ifb_softc *sc = ri->ri_hw; int bg, fg; int x, y, w; ri->ri_ops.unpack_attr(cookie, attr, &fg, &bg, NULL); if ((num == ri->ri_rows) && ISSET(ri->ri_flg, RI_FULLCLEAR)) { num = ri->ri_height; x = y = 0; w = ri->ri_width; } else { num *= ri->ri_font->fontheight; x = ri->ri_xorigin; y = ri->ri_yorigin + row * ri->ri_font->fontheight; w = ri->ri_emuwidth; } ifb_fillrect(sc, x, y, w, num, ri->ri_devcmap[bg]); return 0; } void ifb_copyrect(struct ifb_softc *sc, int sx, int sy, int dx, int dy, int w, int h) { ifb_rop(sc, sx, sy, dx, dy, w, h, IFB_ROP_SRC, IFB_PIXELMASK); ifb_rop_wait(sc); } void ifb_fillrect(struct ifb_softc *sc, int x, int y, int w, int h, int bg) { int32_t mask; /* pixels to set... */ mask = IFB_PIXELMASK & bg; if (mask != 0) { ifb_rop(sc, x, y, x, y, w, h, IFB_ROP_SET, mask); ifb_rop_wait(sc); } /* pixels to clear... */ mask = IFB_PIXELMASK & ~bg; if (mask != 0) { ifb_rop(sc, x, y, x, y, w, h, IFB_ROP_CLEAR, mask); ifb_rop_wait(sc); } } /* * Perform a raster operation on both overlay planes. * Puzzled by all the magic numbers in there? So are we. Isn't a dire * lack of documentation wonderful? */ static inline void ifb_rop(struct ifb_softc *sc, int sx, int sy, int dx, int dy, int w, int h, uint32_t rop, int32_t planemask) { (*sc->sc_rop)(sc, sx, sy, dx, dy, w, h, rop, planemask); } void ifb_rop_common(struct ifb_softc *sc, bus_addr_t reg, int sx, int sy, int dx, int dy, int w, int h, uint32_t rop, int32_t planemask) { int dir = 0; /* * Compute rop direction. This only really matters for * screen-to-screen copies. */ if (sy < dy /* && sy + h > dy */) { sy += h - 1; dy += h; dir |= IFB_BLT_DIR_BACKWARDS_Y; } if (sx < dx /* && sx + w > dx */) { sx += w - 1; dx += w; dir |= IFB_BLT_DIR_BACKWARDS_X; } /* Which one of those below is your magic number for today? */ bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x61000001); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x6301c080); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x80000000); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, rop); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, planemask); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x64000303); /* * This value is a pixel offset within the destination area. It is * probably used to define complex polygon shapes, with the * last pixel in the list being back to (0,0). */ bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, IFB_COORDS(0, 0)); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x00030000); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x2200010d); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x33f01000 | dir); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, IFB_COORDS(dx, dy)); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, IFB_COORDS(w, h)); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, IFB_COORDS(sx, sy)); } void ifb_rop_ifb(void *v, int sx, int sy, int dx, int dy, int w, int h, uint32_t rop, int32_t planemask) { struct ifb_softc *sc = (struct ifb_softc *)v; bus_addr_t reg = IFB_REG_ENGINE; bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 2); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 1); /* the ``0101'' part is probably a component selection */ bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x540101ff); ifb_rop_common(sc, reg, sx, sy, dx, dy, w, h, rop, planemask); } void ifb_rop_jfb(void *v, int sx, int sy, int dx, int dy, int w, int h, uint32_t rop, int32_t planemask) { struct ifb_softc *sc = (struct ifb_softc *)v; bus_addr_t reg = JFB_REG_ENGINE; uint32_t spr, splr; /* * Pick the current spr and splr values from the communication * area if possible. */ if (sc->sc_comm != NULL) { spr = sc->sc_comm[IFB_SHARED_TERM8_SPR >> 2]; splr = sc->sc_comm[IFB_SHARED_TERM8_SPLR >> 2]; } else { /* supposedly sane defaults */ spr = 0x54ff0303; splr = 0x5c0000ff; } bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x00400016); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x5b000002); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x5a000000); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, spr); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, splr); ifb_rop_common(sc, reg, sx, sy, dx, dy, w, h, rop, planemask); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x5a000001); bus_space_write_4(sc->sc_mem_t, sc->sc_reg_h, reg, 0x5b000001); } int ifb_rop_wait(struct ifb_softc *sc) { int i; for (i = 1000000; i != 0; i--) { if (bus_space_read_4(sc->sc_mem_t, sc->sc_reg_h, IFB_REG_STATUS) & IFB_REG_STATUS_DONE) break; DELAY(1); } return i; } int ifb_do_cursor(struct rasops_info *ri) { struct ifb_softc *sc = ri->ri_hw; int y, x; y = ri->ri_yorigin + ri->ri_crow * ri->ri_font->fontheight; x = ri->ri_xorigin + ri->ri_ccol * ri->ri_font->fontwidth; ifb_rop(sc, x, y, x, y, ri->ri_font->fontwidth, ri->ri_font->fontheight, IFB_ROP_XOR, IFB_PIXELMASK); ifb_rop_wait(sc); return 0; }