# $NetBSD: GENERIC_KGDB,v 1.1.2.1 1996/08/19 23:35:07 gwr Exp $ # # GENERIC_KGDB Sun3 (3/50, 3/60, 3/110, 3/160, 3/260) # like GENERIC but supports KGDB (gdb -k on other machine) # include "arch/sun3/conf/std.sun3" # Machines to be supported by this kernel options GENERIC options FPU_EMULATE options HAVECACHE # Sun3/260 VAC # Needs to be set per system. i.e change these as you see fit maxusers 4 # Standard system options options KTRACE # system call tracing support # Debugging options. Uncomment either this: #options DDB # ... or these two: (for KGDB on another machine) makeoptions DEBUG="-g" # symbols for kgdb + nm options KGDB # Filesystem options options NFSSERVER # nfs server support options NFSCLIENT # nfs client support options FFS # ufs file system # options CD9660 # ISO 9660 + Rock Ridge file system options FDESC # /dev/fd/* options FIFO # FIFOs; RECOMMENDED options KERNFS # /kern options NULLFS # loopback file system options PROCFS # /proc options UNION # union file system options MFS # memory-based filesystem # Networking options options INET # IP prototol stack support #options GATEWAY # IP packet forwarding options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD # XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...) options NFS_BOOT_RWSIZE=1024 # Compatability options options COMPAT_SUNOS # can run SunOS 4.1.1 executables options COMPAT_43 # and 4.3BSD and ... options COMPAT_10 # NetBSD 1.0 options COMPAT_11 # NetBSD 1.1 options COMPAT_12 # NetBSD 1.2 # Sun3-specific debugging options options PMAP_DEBUG #options VMFAULT_TRACE #options SYSCALL_DEBUG #options EXEC_DEBUG options DIAGNOSTIC #options SCSIDEBUG options NCR5380_DEBUG config bsd swap generic # # Serial ports # zstty0 at zsc1 channel 0 # ttya zstty1 at zsc1 channel 1 # ttyb kbd0 at zsc0 channel 0 # keyboard ms0 at zsc0 channel 1 # mouse # # Network devices # # Intel Ethernet (onboard, or VME) ie0 at obio0 addr ? level ? ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75 # Lance Ethernet (only onboard) le0 at obio0 addr ? level ? # # Disk and tape devices # # Sun3 "si" SCSI controller (NCR 5380) si0 at obio0 addr ? level ? si0 at vmes0 addr 0xff200000 level 2 vect 0x40 si1 at vmes0 addr 0xff204000 level 2 vect 0x41 # Xylogics 7053 controllers # xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44 # xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45 # xd* at xdc? drive ? # Xylogics 450/451 controllers # xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48 # xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49 # xy* at xyc? drive ? # Xylogics 472 tape controllers? # # Frame buffer devices # # The default cgfour address depends on the machine: # 3/60: obmem 0xFF200000 .. 0xFF9fffff # 3/110: different? (not tested) cgfour0 at obmem0 addr ? # 3/60 P4 accelerated 8-bit color frame buffer # cgsix0 at obmem0 addr ? # 3/60 P4 24-bit color frame buffer # cgeight0 at obmem0 addr ? # The default bwtwo address depends on the machine: # 3/50: obmem 0x100000 # else: obmem 0xff000000 bwtwo0 at obmem0 addr ? # 3/60 P4 color frame buffer overlay plane, or P4 monochrome frame buffer #bwtwo1 at obmem0 addr 0xff300000 # 3/60 plug-in color frame buffer overlay plane #bwtwo1 at obmem0 addr 0xff400000 # Sun-3 color board, or CG5 8-bit VME frame buffer. cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8 # Support for the CG9 24-bit VME frame buffer. # cgnine0 at vmel0 addr 0x08000000 # # SCSI infrastructure # scsibus* at scsi? # Sun compatible scsi device mappings sd0 at scsibus? target 0 lun 0 sd1 at scsibus? target 0 lun 1 sd2 at scsibus? target 1 lun 0 sd3 at scsibus? target 1 lun 1 sd* at scsibus? target ? lun ? st0 at scsibus? target 4 lun 0 st1 at scsibus? target 5 lun 0 st* at scsibus? target ? lun ? cd0 at scsibus? target 6 lun 0 cd* at scsibus? target ? lun ? #ch* at scsibus? target ? lun ? # RAM-disk drivers pseudo-device rd 2 # Misc. pseudo-device loop 1 # network loopback pseudo-device bpfilter 8 # packet filter pseudo-device sl 2 # CSLIP pseudo-device ppp 2 # PPP pseudo-device tun 2 # network tunneling over tty pseudo-device pty 64 # pseudo-terminals #pseudo-device vnd 4 # paging to files