#	$OpenBSD: RAMDISK,v 1.17 2001/01/03 02:03:28 miod Exp $
#	$NetBSD: RAMDISK,v 1.3.4.1 1996/08/19 23:35:10 gwr Exp $

# Machine architecture; required by config(8)
machine		sun3 m68k

# maxusers means mostly "let's get small" in terms of kernel malloc's
maxusers	2
# force default minimum number of buffers and dependents
option		NBUF=16

# Enable the hooks used for initializing the ram-disk.
option	 	RAMDISK_HOOKS
option	 	MINIROOTSIZE=3000

#option		DDB

option		TIMEZONE=0
option		DST=0

option		DIAGNOSTIC
option		FFS
option		NFSCLIENT
#option		CD9660
option		KERNFS
option		INET
option		BOOT_CONFIG
option		SWAPPAGER
option		DEVPAGER

# XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...)
option	 	NFS_BOOT_RWSIZE=1024

# Machines to be supported by this kernel
option	 	FPU_EMULATE		# XXX - Should not be needed!
option	 	HAVECACHE		# Sun3/260 VAC

# Generic swap; second partition of root disk or network.
config		bsd root on rd0a swap on rd0b

# The root node:
mainbus0 at root

# device space
obio0  at mainbus?
# main memory
obmem0 at mainbus?
# VME D16 space
vmes0 at mainbus?
# VME D32 space
vmel0 at mainbus?

# Devices that should be present in any Sun3 kernel.

# OBIO
zsc0    at obio0 addr 0x000000
zsc1    at obio0 addr 0x020000
eeprom0 at obio0 addr 0x040000
clock0  at obio0 addr 0x060000
memerr0 at obio0 addr 0x080000
intreg0 at obio0 addr 0x0A0000

#
# Serial ports
#
zstty0 at zsc1 channel 0	# ttya
zstty1 at zsc1 channel 1	# ttyb

kbd0   at zsc0 channel 0	# keyboard
ms0    at zsc0 channel 1	# mouse

#
# Network devices
#

# Intel Ethernet (onboard, or VME)
ie0 at obio0 addr   0x0C0000 level 3
ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75

# Lance Ethernet (only onboard)
le0 at obio0 addr   0x120000 level 3
# All Sun3 machines with an "le" (3/50, 3/60) should be
# presumed to have the old, buggy LANCE chip. (Rev. C)
options 	LANCE_REVC_BUG

#
# Disk and tape devices
#

# Sun3 "si" SCSI controller (NCR 5380)
si0 at obio0 addr   0x140000 level 2 flags 0x07
si0 at vmes0 addr 0xff200000 level 2 vect 0x40 flags 0x07
si1 at vmes0 addr 0xff204000 level 2 vect 0x41 flags 0x07

# Xylogics 7053 controllers
# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
# xd* at xdc? drive ?

# Xylogics 450/451 controllers
# xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
# xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
# xy* at xyc? drive ?

# Xylogics 472 tape controllers?

#
# Frame buffer devices
# (Not needed for the RAMDISK installation kernel)

#
# SCSI infrastructure
#
scsibus* at scsi?

sd* at scsibus? target ? lun ?
st* at scsibus? target ? lun ?
cd* at scsibus? target ? lun ?

# RAM-disk (root for install tape)
pseudo-device	rd		2	# RAM-disk
pseudo-device	loop		1	# network loopback
pseudo-device	pty		4	# pseudo-terminals