#	$NetBSD: RAMDISK,v 1.1 1995/10/08 23:38:44 gwr Exp $

#
# RAMDISK: Root/swap on ramdisk
# This kernel is used to:
#	format the disk (not yet implemented)
#	partition the disk (disklabel)
#	install the miniroot in the swap partition
#

include "std.sun3"

# Machines to be supported by this kernel
options 	HAVECACHE		# Sun3/260 VAC

# Enable the hooks used for initializing the ram-disk.
options 	RAMDISK_HOOKS
options 	MINIROOTSIZE=512	# 256K

# Needs to be set per system.  i.e change these as you see fit
maxusers	2

# Standard system options
options		SWAPPAGER, VNODEPAGER, DEVPAGER	# paging

# Filesystem options
# May need NFSCLIENT to get miniroot image
options 	NFSCLIENT			# nfs client support
# Need FFS for the ramdisk image
options 	FFS				# ufs file system
options		FIFO		# FIFOs; RECOMMENDED

# Networking options
options		INET				# IP prototol stack support
# XXX - Work-around for slow SunOS/Sun3 servers (sigh...)
options 	NFS_BOOT_RWSIZE=1024

# Compatability options (XXX - Need these?)
#options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
#options 	COMPAT_09	# NetBSD 0.9,
options 	COMPAT_10	# NetBSD 1.0,
options 	COMPAT_43	# and 4.3BSD
options 	TCP_COMPAT_42	# TCP bug compatibility with 4.2BSD

# Sun3-specific debugging options
# options 	DDB
options 	DIAGNOSTIC

# The config program assumes all devices have partions...
# Is it OK to put swap on a non-existent partition?
config		netbsd root on rd0a swap on rd0b

# Devices

# RAM Disk (root for install tape)
rd0 at mainbus?

# No frame-buffer devices.

ie0 at obio0 addr ? level ?
ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75

le0 at obio0 addr ? level ?

si0 at obio0 addr ? level ?
si0 at vmes0 addr 0xff200000 level 2 vect 0x40

scsibus* at scsi?

# Sun compatible scsi device mappings
sd0 at scsibus? target 0 lun 0
sd1 at scsibus? target 0 lun 1
sd2 at scsibus? target 1 lun 0
sd3 at scsibus? target 1 lun 1
sd* at scsibus? target ? lun ?

st0 at scsibus? target 4 lun 0
st1 at scsibus? target 5 lun 0
st* at scsibus? target ? lun ?

cd0 at scsibus? target 6 lun 0
cd* at scsibus? target ? lun ?

#ch* at scsibus? target ? lun ?

pseudo-device	loop	1		# network loopback