/* $OpenBSD: if_ie_vmes.c,v 1.5 1997/01/16 04:03:48 kstailey Exp $ */ /* $NetBSD: if_ie_vmes.c,v 1.5 1996/11/20 18:56:51 gwr Exp $ */ /*- * Copyright (c) 1996 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Gordon W. Ross. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Machine-dependent glue for the Intel Ethernet (ie) driver. */ #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif #include #include #include #include #include #include "i82586.h" #include "if_iereg.h" #include "if_ievar.h" static void ie_vmereset __P((struct ie_softc *)); static void ie_vmeattend __P((struct ie_softc *)); static void ie_vmerun __P((struct ie_softc *)); /* * zero/copy functions: OBIO can use the normal functions, but VME * must do only byte or half-word (16 bit) accesses... */ static void wcopy __P((const void *, void *, u_int)); static void wzero __P((void *, u_int)); /* * New-style autoconfig attachment */ static int ie_vmes_match __P((struct device *, void *, void *)); static void ie_vmes_attach __P((struct device *, struct device *, void *)); struct cfattach ie_vmes_ca = { sizeof(struct ie_softc), ie_vmes_match, ie_vmes_attach }; static int ie_vmes_match(parent, vcf, args) struct device *parent; void *vcf, *args; { struct confargs *ca = args; int x; #ifdef DIAGNOSTIC if (ca->ca_bustype != BUS_VME16) { printf("ie_vmes_match: bustype %d?\n", ca->ca_bustype); return (0); } #endif /* No default VME address. */ if (ca->ca_paddr == -1) return(0); /* Default interrupt level. */ if (ca->ca_intpri == -1) ca->ca_intpri = 3; x = bus_peek(ca->ca_bustype, ca->ca_paddr, 2); return (x != -1); } /* * *note*: we don't detect the difference between a VME3E and * a multibus/vme card. if you want to use a 3E you'll have * to fix this. */ void ie_vmes_attach(parent, self, args) struct device *parent; struct device *self; void *args; { struct ie_softc *sc = (void *) self; struct confargs *ca = args; volatile struct ievme *iev; u_long rampaddr; int lcv, off; sc->hard_type = IE_VME; sc->reset_586 = ie_vmereset; sc->chan_attn = ie_vmeattend; sc->run_586 = ie_vmerun; sc->sc_bcopy = wcopy; sc->sc_bzero = wzero; /* * There is 64K of memory on the VME board. * (determined by hardware - NOT configurable!) */ sc->sc_msize = 0x10000; /* MEMSIZE 64K */ /* Map in the board control regs. */ sc->sc_reg = bus_mapin(ca->ca_bustype, ca->ca_paddr, sizeof(struct ievme)); iev = (volatile struct ievme *) sc->sc_reg; /* * Find and map in the board memory. */ /* top 12 bits */ rampaddr = ca->ca_paddr & 0xfff00000; /* 4 more */ rampaddr |= ((iev->status & IEVME_HADDR) << 16); sc->sc_maddr = bus_mapin(ca->ca_bustype, rampaddr, sc->sc_msize); /* * On this hardware, the i82586 address is just * masked to 16 bits, so sc_iobase == sc_maddr */ sc->sc_iobase = sc->sc_maddr; /* * Set up on-board mapping registers for linear map. */ iev->pectrl |= IEVME_PARACK; /* clear to start */ for (lcv = 0; lcv < IEVME_MAPSZ; lcv++) iev->pgmap[lcv] = IEVME_SBORDR | IEVME_OBMEM | lcv; (sc->sc_bzero)(sc->sc_maddr, sc->sc_msize); /* * Set the System Configuration Pointer (SCP). * Its location is system-dependent because the * i82586 reads it from a fixed physical address. * On this hardware, the i82586 address is just * masked down to 16 bits, so the SCP is found * at the end of the RAM on the VME board. */ off = IE_SCP_ADDR & 0xFFFF; sc->scp = (volatile void *) (sc->sc_maddr + off); /* * The rest of ram is used for buffers, etc. */ sc->buf_area = sc->sc_maddr; sc->buf_area_sz = off; /* Set the ethernet address. */ idprom_etheraddr(sc->sc_addr); /* Do machine-independent parts of attach. */ ie_attach(sc); /* Install interrupt handler. */ isr_add_vectored(ie_intr, (void *)sc, ca->ca_intpri, ca->ca_intvec); } /* * MULTIBUS/VME support */ void ie_vmereset(sc) struct ie_softc *sc; { volatile struct ievme *iev = (struct ievme *) sc->sc_reg; iev->status = IEVME_RESET; delay(100); /* XXX could be shorter? */ iev->status = 0; } void ie_vmeattend(sc) struct ie_softc *sc; { volatile struct ievme *iev = (struct ievme *) sc->sc_reg; iev->status |= IEVME_ATTEN; /* flag! */ iev->status &= ~IEVME_ATTEN; /* down. */ } void ie_vmerun(sc) struct ie_softc *sc; { volatile struct ievme *iev = (struct ievme *) sc->sc_reg; iev->status |= (IEVME_ONAIR | IEVME_IENAB | IEVME_PEINT); } /* * wcopy/wzero - like bcopy/bzero but largest access is 16-bits, * and also does byte swaps... * XXX - Would be nice to have asm versions in some library... */ static void wzero(vb, l) void *vb; u_int l; { u_char *b = vb; u_char *be = b + l; u_short *sp; if (l == 0) return; /* front, */ if ((u_long)b & 1) *b++ = 0; /* back, */ if (b != be && ((u_long)be & 1) != 0) { be--; *be = 0; } /* and middle. */ sp = (u_short *)b; while (sp != (u_short *)be) *sp++ = 0; } static void wcopy(vb1, vb2, l) const void *vb1; void *vb2; u_int l; { const u_char *b1e, *b1 = vb1; u_char *b2 = vb2; u_short *sp; int bstore = 0; if (l == 0) return; /* front, */ if ((u_long)b1 & 1) { *b2++ = *b1++; l--; } /* middle, */ sp = (u_short *)b1; b1e = b1 + l; if (l & 1) b1e--; bstore = (u_long)b2 & 1; while (sp < (u_short *)b1e) { if (bstore) { b2[1] = *sp & 0xff; b2[0] = *sp >> 8; } else *((short *)b2) = *sp; sp++; b2 += 2; } /* and back. */ if (l & 1) *b2 = *b1e; }