/* $OpenBSD: if_zereg.h,v 1.1 2000/04/27 03:14:43 bjc Exp $ */ /* $NetBSD: if_zereg.h,v 1.1 1998/07/01 10:52:10 ragge Exp $ */ /* * Copyright (c) 1988 Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Digital Equipment Corp. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ /* Driver for SGEC (second generation Ethernet controller) chip, type DC-541, found on the KA670 (and prob ably other) CPU. 17 May 1998...Jay Maynard, jmaynard@phoenix.net */ /* SGEC CSRs */ struct zedevice { u_long ze_nicsr0; /* vector address, IPL, sync mode */ u_long ze_nicsr1; /* TX poll demand */ u_long ze_nicsr2; /* RX poll demand */ struct ze_rdes *ze_nicsr3; /* RX descriptor list address */ struct ze_tdes *ze_nicsr4; /* TX descriptor list address */ u_long ze_nicsr5; /* SGEC status */ u_long ze_nicsr6; /* SGEC command/mode */ u_long ze_nicsr7; /* system page table base address */ u_long ze_nivcsr8; /* reserved virtual CSR */ u_long ze_nivcsr9; /* watchdog timers (virtual) */ u_long ze_nivcsr10; /* revision, missed frame count (v) */ u_long ze_nivcsr11; /* boot message verification (low) (v) */ u_long ze_nivcsr12; /* boot message verification (high) (v) */ u_long ze_nivcsr13; /* boot message processor (v) */ u_long ze_nivcsr14; /* diagnostic breakpoint (v) */ u_long ze_nicsr15; /* monitor command */ }; /* SGEC bit definitions */ /* NICSR0: */ #define ZE_NICSR0_IPL 0xc0000000 /* interrupt priority level: */ #define ZE_NICSR0_IPL14 0x00000000 /* 0x14 */ #define ZE_NICSR0_IPL15 0x40000000 /* 0x15 */ #define ZE_NICSR0_IPL16 0x80000000 /* 0x16 */ #define ZE_NICSR0_IPL17 0xc0000000 /* 0x17 */ #define ZE_NICSR0_SA 0x20000000 /* sync(1)/async mode */ #define ZE_NICSR0_MBO 0x1fff0003 /* must be set to one on write */ #define ZE_NICSR0_IV_MASK 0x0000fffc /* bits for the interrupt vector */ /* NICSR1: */ #define ZE_NICSR1_TXPD 0xffffffff /* transmit polling demand */ /* NICSR2: */ #define ZE_NICSR2_RXPD 0xffffffff /* receive polling demand */ /* NICSR3 and NICSR4 are pure addresses */ /* NICSR5: */ #define ZE_NICSR5_ID 0x80000000 /* init done */ #define ZE_NICSR5_SF 0x40000000 /* self-test failed */ #define ZE_NICSR5_SS 0x3c000000 /* self-test status field */ #define ZE_NICSR5_TS 0x03000000 /* transmission state: */ #define ZE_NICSR5_TS_STOP 0x00000000 /* stopped */ #define ZE_NICSR5_TS_RUN 0x01000000 /* running */ #define ZE_NICSR5_TS_SUSP 0x02000000 /* suspended */ #define ZE_NICSR5_RS 0x00c00000 /* reception state: */ #define ZE_NICSR5_RS_STOP 0x00000000 /* stopped */ #define ZE_NICSR5_RS_RUN 0x00400000 /* running */ #define ZE_NICSR5_RS_SUSP 0x00800000 /* suspended */ #define ZE_NICSR5_OM 0x00060000 /* operating mode: */ #define ZE_NICSR5_OM_NORM 0x00000000 /* normal */ #define ZE_NICSR5_OM_ILBK 0x00020000 /* internal loopback */ #define ZE_NICSR5_OM_ELBK 0x00040000 /* external loopback */ #define ZE_NICSR5_OM_DIAG 0x00060000 /* reserved for diags */ #define ZE_NICSR5_DN 0x00010000 /* virtual CSR access done */ #define ZE_NICSR5_MBO 0x0038ff00 /* must be one */ #define ZE_NICSR5_BO 0x00000080 /* boot message received */ #define ZE_NICSR5_TW 0x00000040 /* transmit watchdog timeout */ #define ZE_NICSR5_RW 0x00000020 /* receive watchdog timeout */ #define ZE_NICSR5_ME 0x00000010 /* memory error */ #define ZE_NICSR5_RU 0x00000008 /* receive buffer unavailable */ #define ZE_NICSR5_RI 0x00000004 /* receiver interrupt */ #define ZE_NICSR5_TI 0x00000002 /* transmitter interrupt */ #define ZE_NICSR5_IS 0x00000001 /* interrupt summary */ /* whew! */ /* NICSR6: */ #define ZE_NICSR6_RE 0x80000000 /* reset */ #define ZE_NICSR6_IE 0x40000000 /* interrupt enable */ #define ZE_NICSR6_MBO 0x01e7f000 /* must be one */ #define ZE_NICSR6_BL 0x1e000000 /* burst limit mask */ #define ZE_NICSR6_BL_8 0x10000000 /* 8 longwords */ #define ZE_NICSR6_BL_4 0x08000000 /* 4 longwords */ #define ZE_NICSR6_BL_2 0x04000000 /* 2 longwords */ #define ZE_NICSR6_BL_1 0x02000000 /* 1 longword */ #define ZE_NICSR6_BE 0x00100000 /* boot message enable */ #define ZE_NICSR6_SE 0x00080000 /* single cycle enable */ #define ZE_NICSR6_ST 0x00000800 /* start(1)/stop(0) transmission */ #define ZE_NICSR6_SR 0x00000400 /* start(1)/stop(0) reception */ #define ZE_NICSR6_OM 0x00000300 /* operating mode: */ #define ZE_NICSR6_OM_NORM 0x00000000 /* normal */ #define ZE_NICSR6_OM_ILBK 0x00000100 /* internal loopback */ #define ZE_NICSR6_OM_ELBK 0x00000200 /* external loopback */ #define ZE_NICSR6_OM_DIAG 0x00000300 /* reserved for diags */ #define ZE_NICSR6_DC 0x00000080 /* disable data chaining */ #define ZE_NICSR6_FC 0x00000040 /* force collision mode */ #define ZE_NICSR6_PB 0x00000008 /* pass bad frames */ #define ZE_NICSR6_AF 0x00000006 /* address filtering mode: */ #define ZE_NICSR6_AF_NORM 0x00000000 /* normal filtering */ #define ZE_NICSR6_AF_PROM 0x00000002 /* promiscuous mode */ #define ZE_NICSR6_AF_ALLM 0x00000004 /* all multicasts */ /* NICSR7 is an address, NICSR8 is reserved */ /* NICSR9: */ #define ZE_VNICSR9_RT 0xffff0000 /* receiver timeout, *1.6 us */ #define ZE_VNICSR9_TT 0x0000ffff /* transmitter timeout */ /* NICSR10: */ #define ZE_VNICSR10_RN 0x001f0000 /* SGEC version */ #define ZE_VNICSR10_MFC 0x0000ffff /* missed frame counter */ /* if you want to know what's in NICSRs 11-15, define them yourself! */ /* Descriptors: */ /* Receive descriptor */ struct ze_rdes { u_short ze_rdes0; /* descriptor word 0 flags */ u_short ze_framelen; /* received frame length */ u_char ze_rsvd1[3]; /* unused bytes */ u_char ze_rdes1; /* descriptor word 1 flags */ short ze_pageoffset; /* offset of buffer in page */ short ze_bufsize; /* length of data buffer */ u_char *ze_bufaddr; /* address of data buffer */ }; /* Receive descriptor bits */ #define ZE_FRAMELEN_OW 0x8000 /* SGEC owns this descriptor */ #define ZE_RDES0_ES 0x8000 /* an error has occurred */ #define ZE_RDES0_LE 0x4000 /* length error */ #define ZE_RDES0_DT 0x3000 /* data type: */ #define ZE_RDES0_DT_NORM 0x0000 /* normal frame */ #define ZE_RDES0_DT_ILBK 0x1000 /* internally looped back frame */ #define ZE_RDES0_DT_ELBK 0x2000 /* externally looped back frame */ #define ZE_RDES0_RF 0x0800 /* runt frame */ #define ZE_RDES0_BO 0x0400 /* buffer overflow */ #define ZE_RDES0_FS 0x0200 /* first segment */ #define ZE_RDES0_LS 0x0100 /* last segment */ #define ZE_RDES0_TL 0x0080 /* frame too long */ #define ZE_RDES0_CS 0x0040 /* collision seen */ #define ZE_RDES0_FT 0x0020 /* Ethernet frame type */ #define ZE_RDES0_TN 0x0008 /* address translation not valid */ #define ZE_RDES0_DB 0x0004 /* dribbling bits seen */ #define ZE_RDES0_CE 0x0002 /* CRC error */ #define ZE_RDES0_OF 0x0001 /* internal FIFO overflow */ #define ZE_RDES1_CA 0x80 /* chain address */ #define ZE_RDES1_VA 0x40 /* virtual address */ #define ZE_RDES1_VT 0x20 /* virtual(1)/phys PTE address */ /* Transmit descriptor */ struct ze_tdes { u_short ze_tdes0; /* descriptor word 0 flags */ u_short ze_tdr; /* TDR count of cable fault */ u_char ze_rsvd1[2]; /* unused bytes */ u_short ze_tdes1; /* descriptor word 1 flags */ short ze_pageoffset; /* offset of buffer in page */ short ze_bufsize; /* length of data buffer */ u_char *ze_bufaddr; /* address of data buffer */ }; /* Receive descriptor bits */ #define ZE_TDR_OW 0x8000 /* SGEC owns this descriptor */ #define ZE_TDES0_ES 0x8000 /* an error has occurred */ #define ZE_TDES0_TO 0x4000 /* transmit watchdog timeout */ #define ZE_TDES0_LE 0x1000 /* length error */ #define ZE_TDES0_LO 0x0800 /* loss of carrier */ #define ZE_TDES0_NC 0x0400 /* no carrier */ #define ZE_TDES0_LC 0x0200 /* late collision */ #define ZE_TDES0_EC 0x0100 /* excessive collisions */ #define ZE_TDES0_HF 0x0080 /* heartbeat fail */ #define ZE_TDES0_CC 0x0078 /* collision count mask */ #define ZE_TDES0_TN 0x0004 /* address translation invalid */ #define ZE_TDES0_UF 0x0002 /* underflow */ #define ZE_TDES0_DE 0x0001 /* transmission deferred */ #define ZE_TDES1_CA 0x8000 /* chain address */ #define ZE_TDES1_VA 0x4000 /* virtual address */ #define ZE_TDES1_DT 0x3000 /* data type: */ #define ZE_TDES1_DT_NORM 0x0000 /* normal transmit frame */ #define ZE_TDES1_DT_SETUP 0x2000 /* setup frame */ #define ZE_TDES1_DT_DIAG 0x3000 /* diagnostic frame */ #define ZE_TDES1_AC 0x0800 /* CRC disable */ #define ZE_TDES1_FS 0x0400 /* first segment */ #define ZE_TDES1_LS 0x0200 /* last segment */ #define ZE_TDES1_IC 0x0100 /* interrupt on completion */ #define ZE_TDES1_VT 0x0080 /* virtual(1)/phys PTE address */