/* $OpenBSD: mscpvar.h,v 1.7 2011/11/01 20:50:11 miod Exp $ */ /* $NetBSD: mscpvar.h,v 1.7 1999/06/06 19:16:18 ragge Exp $ */ /* * Copyright (c) 1996 Ludd, University of Lule}, Sweden. * Copyright (c) 1988 Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Chris Torek. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)mscpvar.h 7.3 (Berkeley) 6/28/90 */ /* * MSCP generic driver configuration */ /* * Enabling MSCP_PARANOIA makes the response code perform various checks * on the hardware. (Right now it verifies only the buffer pointer in * mscp_cmdref.) * * Enabling AVOID_EMULEX_BUG selects an alternative method of identifying * transfers in progress, which gets around a rather peculiar bug in the * SC41/MS. Enabling MSCP_PARANOIA instead should work, but will cause * `extra' Unibus resets. * * Either of these flags can simply be included as an `options' line in * your configuration file. */ /* #define MSCP_PARANOIA */ /* #define AVOID_EMULEX_BUG */ /* * Ring information, per ring (one each for commands and responses). */ struct mscp_ri { int mri_size; /* ring size */ int mri_next; /* next (expected|free) */ long *mri_desc; /* base address of descriptors */ struct mscp *mri_ring; /* base address of packets */ }; /* * Transfer info, one per command packet. */ struct mscp_xi { bus_dmamap_t mxi_dmam; /* Allocated DMA map for this entry */ struct buf * mxi_bp; /* Buffer used in this command */ struct mscp * mxi_mp; /* Packet used in this command */ int mxi_inuse; }; struct mscp_ctlr { /* controller operation complete */ void (*mc_ctlrdone)(struct device *); /* device-specific start routine */ void (*mc_go)(struct device *, struct mscp_xi *); /* ctlr error handling */ void (*mc_saerror)(struct device *, int); }; struct mscp_softc; struct mscp_device { /* error datagram */ void (*me_dgram)(struct device *, struct mscp *, struct mscp_softc *); /* normal I/O is done */ void (*me_iodone)(struct device *, struct buf *); /* drive on line */ int (*me_online)(struct device *, struct mscp *); /* got unit status */ int (*me_gotstatus)(struct device *, struct mscp *); /* replace done */ void (*me_replace)(struct device *, struct mscp *); /* read or write failed */ int (*me_ioerr)(struct device *, struct mscp *, struct buf *); /* B_BAD io done */ void (*me_bb)(struct device *, struct mscp *, struct buf *); /* Fill in mscp info for this drive */ void (*me_fillin)(struct buf *,struct mscp *); /* Non-data transfer operation is done */ void (*me_cmddone)(struct device *, struct mscp *); }; /* * This struct is used when attaching a mscpbus. */ struct mscp_attach_args { struct mscp_ctlr *ma_mc; /* Pointer to ctlr's mscp_ctlr */ int ma_type; /* disk/tape bus type */ struct mscp_pack *ma_uda; /* comm area virtual */ struct mscp_softc **ma_softc; /* backpointer to bus softc */ bus_dmamap_t ma_dmam; /* This comm area dma info */ bus_dma_tag_t ma_dmat; bus_space_tag_t ma_iot; bus_space_handle_t ma_iph; /* initialisation and polling */ bus_space_handle_t ma_sah; /* status & address (read part) */ bus_space_handle_t ma_swh; /* status & address (write part) */ short ma_ivec; /* Interrupt vector to use */ char ma_ctlrnr; /* Phys ctlr nr */ char ma_adapnr; /* Phys adapter nr */ }; #define MSCPBUS_DISK 001 /* Bus is used for disk mounts */ #define MSCPBUS_TAPE 002 /* Bus is used for tape mounts */ #define MSCPBUS_UDA 004 /* ctlr is disk on unibus/qbus */ #define MSCPBUS_KDB 010 /* ctlr is disk on BI */ #define MSCPBUS_KLE 020 /* ctlr is tape on unibus/qbus */ /* * Used when going for child devices. */ struct drive_attach_args { struct mscp *da_mp; /* this devices response struct */ int da_typ; /* Parent of type */ }; /* * Return values from functions. * MSCP_RESTARTED is peculiar to I/O errors. */ #define MSCP_DONE 0 /* all ok */ #define MSCP_FAILED 1 /* no go */ #define MSCP_RESTARTED 2 /* transfer restarted */ /* * Per device information. * * mi_ip is a pointer to the inverting pointers (things that get `ui's * given unit numbers) FOR THIS CONTROLLER (NOT the whole set!). * * b_actf holds a queue of those transfers that were started but have * not yet finished. Other Unibus drivers do not need this as they hand * out requests one at a time. MSCP devices, however, take a slew of * requests and pick their own order to execute them. This means that * we have to have a place to move transfers that were given to the * controller, so we can tell those apart from those that have not yet * been handed out; b_actf is that place. */ struct mscp_softc { struct device mi_dev; /* Autoconf stuff */ struct mscp_ri mi_cmd; /* MSCP command ring info */ struct mscp_ri mi_rsp; /* MSCP response ring info */ bus_dma_tag_t mi_dmat; bus_dmamap_t mi_dmam; struct mscp_xi mi_xi[NCMD]; int mi_mxiuse; /* Bitfield of inuse mxi packets */ short mi_credits; /* transfer credits */ char mi_wantcmd; /* waiting for command packet */ char mi_wantcredits; /* waiting for transfer credits */ struct mscp_ctlr *mi_mc; /* Pointer to parent's mscp_ctlr */ struct mscp_device *mi_me; /* Pointer to child's mscp_device */ struct device **mi_dp; /* array of backpointers */ int mi_driveno; /* Max physical drive number found */ char mi_ctlrnr; /* Phys ctlr nr */ char mi_adapnr; /* Phys adapter nr */ int mi_flags; struct mscp_pack *mi_uda; /* virtual address */ int mi_type; short mi_ivec; /* Interrupt vector to use */ short mi_ierr; /* Init err counter */ bus_space_tag_t mi_iot; bus_space_handle_t mi_iph; /* initialisation and polling */ bus_space_handle_t mi_sah; /* status & address (read part) */ bus_space_handle_t mi_swh; /* status & address (write part) */ SIMPLEQ_HEAD(, buf) mi_resq; /* While waiting for packets */ }; /* mi_flags */ #define MSC_STARTPOLL 1 #define MSC_INSTART 2 #define MSC_IGNOREINTR 4 #define MSC_READY 8 /* * We have run out of credits when mi_credits is <= MSCP_MINCREDITS. * It is still possible to issue one command in this case, but it must * not be a data transfer. E.g., `get command status' or `abort command' * is legal, while `read' is not. */ #define MSCP_MINCREDITS 1 /* * Flags for mscp_getcp(). */ #define MSCP_WAIT 1 #define MSCP_DONTWAIT 0 /* * Unit flags */ #define UNIT_ONLINE 0x01 /* drive is on line */ #define UNIT_HAVESTATUS 0x02 /* got unit status */ #define UNIT_REQUEUE 0x04 /* requeue after response */ /* * Handle a command ring transition: wake up sleepers for command packets. * This is too simple to bother with a function call. */ #define MSCP_DOCMD(mi) { \ if ((mi)->mi_wantcmd) { \ (mi)->mi_wantcmd = 0; \ wakeup((caddr_t) &(mi)->mi_wantcmd); \ } \ } /* Prototypes */ struct mscp *mscp_getcp(struct mscp_softc *, int); void mscp_printevent(struct mscp *); void mscp_go(struct mscp_softc *, struct mscp *, int); void mscp_requeue(struct mscp_softc *); void mscp_dorsp(struct mscp_softc *); int mscp_decodeerror(char *, struct mscp *, struct mscp_softc *); int mscp_print(void *, const char *); void mscp_hexdump(struct mscp *); void mscp_strategy(struct buf *, struct device *); void mscp_printtype(int, int); int mscp_waitstep(struct mscp_softc *, int, int); void mscp_dgo(struct mscp_softc *, struct mscp_xi *); void mscp_intr(struct mscp_softc *);