/* $OpenBSD: ubareg.h,v 1.8 2000/04/27 03:14:51 bjc Exp $ */ /* $NetBSD: ubareg.h,v 1.10 1998/10/18 18:51:30 ragge Exp $ */ /*- * Copyright (c) 1982, 1986 The Regents of the University of California. * All rights reserved. * (c) UNIX System Laboratories, Inc. * All or some portions of this file are derived from material licensed * to the University of California by American Telephone and Telegraph * Co. or Unix System Laboratories, Inc. and are reproduced herein with * the permission of UNIX System Laboratories, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)ubareg.h 7.8 (Berkeley) 5/9/91 */ /* * VAX UNIBUS adapter registers */ /* * "UNIBUS" adaptor types. * This code is used for both UNIBUSes and Q-buses * with different types of adaptors. * Definition of a type includes support code for that type. */ #if VAX780 || VAX8600 #define DW780 1 /* has adaptor regs, sr: 780/785/8600 */ #else #undef DW780 #endif #if VAX750 #define DW750 2 /* has adaptor regs, no sr: 750, 730 */ #endif #if VAX730 #define DW730 3 /* has adaptor regs, no sr: 750, 730 */ #endif #if VAX630 || VAX650 #define QBA 4 /* 22-bit Q-bus, no adaptor regs: uVAX II */ #endif /* * Size of unibus memory address space in pages * (also number of map registers). * QBAPAGES should be 8192, but we don't need nearly that much * address space, and the return from the allocation routine * can accommodate at most 2047 (ubavar.h: UBA_MAXMR); * QBAPAGES must be at least UBAPAGES. Choose pragmatically. * * Is there ever any need to have QBAPAGES != UBAPAGES??? * Wont work now anyway, QBAPAGES _must_ be .eq. UBAPAGES. */ #define UBAPAGES 496 #define NUBMREG 496 #define QBAPAGES 1024 #define UBAIOADDR 0760000 /* start of I/O page */ #define UBAIOPAGES 16 #ifndef _LOCORE /* * DW780/DW750 hardware registers */ struct uba_regs { int uba_cnfgr; /* configuration register */ int uba_cr; /* control register */ int uba_sr; /* status register */ int uba_dcr; /* diagnostic control register */ int uba_fmer; /* failed map entry register */ int uba_fubar; /* failed UNIBUS address register */ int pad1[2]; int uba_brsvr[4]; int uba_brrvr[4]; /* receive vector registers */ int uba_dpr[16]; /* buffered data path register */ int pad2[480]; struct pte uba_map[UBAPAGES]; /* unibus map register */ int pad3[UBAIOPAGES]; /* no maps for device address space */ }; #endif #ifdef DW780 /* uba_cnfgr */ #define UBACNFGR_UBINIT 0x00040000 /* unibus init asserted */ #define UBACNFGR_UBPDN 0x00020000 /* unibus power down */ #define UBACNFGR_UBIC 0x00010000 /* unibus init complete */ #define UBACNFGR_BITS \ "\40\40PARFLT\37WSQFLT\36URDFLT\35ISQFLT\34MXTFLT\33XMTFLT\30ADPDN\27ADPUP\23UBINIT\22UBPDN\21UBIC" /* uba_cr */ #define UBACR_MRD16 0x40000000 /* map reg disable bit 4 */ #define UBACR_MRD8 0x20000000 /* map reg disable bit 3 */ #define UBACR_MRD4 0x10000000 /* map reg disable bit 2 */ #define UBACR_MRD2 0x08000000 /* map reg disable bit 1 */ #define UBACR_MRD1 0x04000000 /* map reg disable bit 0 */ #define UBACR_IFS 0x00000040 /* interrupt field switch */ #define UBACR_BRIE 0x00000020 /* BR interrupt enable */ #define UBACR_USEFIE 0x00000010 /* UNIBUS to SBI error field IE */ #define UBACR_SUEFIE 0x00000008 /* SBI to UNIBUS error field IE */ #define UBACR_CNFIE 0x00000004 /* configuration IE */ #define UBACR_UPF 0x00000002 /* UNIBUS power fail */ #define UBACR_ADINIT 0x00000001 /* adapter init */ /* uba_sr */ #define UBASR_BR7FULL 0x08000000 /* BR7 receive vector reg full */ #define UBASR_BR6FULL 0x04000000 /* BR6 receive vector reg full */ #define UBASR_BR5FULL 0x02000000 /* BR5 receive vector reg full */ #define UBASR_BR4FULL 0x01000000 /* BR4 receive vector reg full */ #define UBASR_RDTO 0x00000400 /* UNIBUS to SBI read data timeout */ #define UBASR_RDS 0x00000200 /* read data substitute */ #define UBASR_CRD 0x00000100 /* corrected read data */ #define UBASR_CXTER 0x00000080 /* command transmit error */ #define UBASR_CXTMO 0x00000040 /* command transmit timeout */ #define UBASR_DPPE 0x00000020 /* data path parity error */ #define UBASR_IVMR 0x00000010 /* invalid map register */ #define UBASR_MRPF 0x00000008 /* map register parity failure */ #define UBASR_LEB 0x00000004 /* lost error */ #define UBASR_UBSTO 0x00000002 /* UNIBUS select timeout */ #define UBASR_UBSSYNTO 0x00000001 /* UNIBUS slave sync timeout */ #define UBASR_BITS \ "\20\13RDTO\12RDS\11CRD\10CXTER\7CXTMO\6DPPE\5IVMR\4MRPF\3LEB\2UBSTO\1UBSSYNTO" /* uba_brrvr[] */ #define UBABRRVR_AIRI 0x80000000 /* adapter interrupt request */ #define UBABRRVR_DIV 0x0000ffff /* device interrupt vector field */ #endif /* uba_dpr */ #ifdef DW780 #define UBADPR_BNE 0x80000000 /* buffer not empty - purge */ #define UBADPR_BTE 0x40000000 /* buffer transfer error */ #define UBADPR_DPF 0x20000000 /* DP function (RO) */ #define UBADPR_BS 0x007f0000 /* buffer state field */ #define UBADPR_BUBA 0x0000ffff /* buffered UNIBUS address */ #endif #ifdef DW750 #define UBADPR_ERROR 0x80000000 /* error occurred */ #define UBADPR_NXM 0x40000000 /* nxm from memory */ #define UBADPR_UCE 0x20000000 /* uncorrectable error */ #define UBADPR_PURGE 0x00000001 /* purge bdp */ #endif /* uba_mr[] */ #define UBAMR_MRV 0x80000000 /* map register valid */ #define UBAMR_BO 0x02000000 /* byte offset bit */ #define UBAMR_DPDB 0x01e00000 /* data path designator field */ #define UBAMR_SBIPFN 0x001fffff /* SBI page address field */ #define UBAMR_DPSHIFT 21 /* shift to data path designator */ /* * Number of unibus buffered data paths and possible uba's per cpu type. */ #define NBDP8600 15 #define NBDP780 15 #define NBDPBUA 5 #define NBDP750 3 #define NBDP730 0 #define MAXNBDP 15 /* * Symbolic BUS addresses for UBAs. */ #if VAX630 || VAX650 #define QBAMAP 0x20088000 #define QMEM 0x30000000 #define QIOPAGE 0x20000000 /* * Q-bus control registers */ #define QIPCR 0x1f40 /* from start of iopage */ /* bits in QIPCR */ #define Q_DBIRQ 0x0001 /* doorbell interrupt request */ #define Q_LMEAE 0x0020 /* local mem external access enable */ #define Q_DBIIE 0x0040 /* doorbell interrupt enable */ #define Q_AUXHLT 0x0100 /* auxiliary processor halt */ #define Q_DMAQPE 0x8000 /* Q22 bus address space parity error */ #endif #if VAX730 #define UMEM730 0xfc0000 #endif #if VAX750 #define UMEM750(i) (0xfc0000-(i)*0x40000) #endif #if VAX780 #define UMEM780(i) (0x20100000+(i)*0x40000) #endif #if VAX8200 /* BEWARE, argument is node, not ubanum */ #define UMEM8200(i) (0x20400000+(i)*0x40000) #endif #if VAX8600 || VAX780 #define UMEMA8600(i) (0x20100000+(i)*0x40000) #define UMEMB8600(i) (0x22100000+(i)*0x40000) #endif /* * Macro to offset a UNIBUS device address, often expressed as * something like 0172520, by forcing it into the last 8K * of UNIBUS memory space. */ #define ubdevreg(addr) ((addr) & 017777)