/* $OpenBSD: dc7085cons.h,v 1.3 2003/06/02 23:27:59 millert Exp $ */ /* $NetBSD: dc7085cons.h,v 1.1 1996/07/20 18:55:10 ragge Exp $ */ /* * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Ralph Campbell and Rick Macklem. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)dc7085cons.h 8.1 (Berkeley) 6/10/93 * * dc7085.h -- * * Definitions for the dc7085 chip. * * Copyright (C) 1989 Digital Equipment Corporation. * Permission to use, copy, modify, and distribute this software and * its documentation for any purpose and without fee is hereby granted, * provided that the above copyright notice appears in all copies. * Digital Equipment Corporation makes no representations about the * suitability of this software for any purpose. It is provided "as is" * without express or implied warranty. * * from: Header: /sprite/src/kernel/dev/ds3100.md/RCS/dc7085.h, * * v 1.4 89/08/15 19:52:46 rab Exp SPRITE (DECWRL) */ #ifndef _DC7085 #define _DC7085 typedef volatile struct dc7085regs { u_short dc_csr; /* control and status (R/W) */ u_short pad0; short dc_rbuf_lpr; /* receiver data (R), line params (W) */ u_short pad1; u_short dc_tcr; /* transmitter control (R/W) */ u_short pad2; u_short dc_msr_tdr; /* modem status (R), transmit data (W) */ } dcregs; #define dc_rbuf dc_rbuf_lpr #define dc_lpr dc_rbuf_lpr #define dc_msr dc_msr_tdr #define dc_tdr dc_msr_tdr /* * Control status register bits. */ #define CSR_TRDY 0x8000 #define CSR_TIE 0x4000 /* not avail on VS2000 */ #define CSR_TX_LINE_NUM 0x0300 #define CSR_RDONE 0x0080 #define CSR_RIE 0x0040 /* not avail on VS2000 */ #define CSR_MSE 0x0020 #define CSR_CLR 0x0010 #define CSR_MAINT 0x0008 /* * Receiver buffer register bits. */ #define RBUF_DVAL 0x8000 #define RBUF_OERR 0x4000 #define RBUF_FERR 0x2000 #define RBUF_PERR 0x1000 #define RBUF_LINE_NUM 0x0300 #define RBUF_LINE_NUM_SHIFT 8 #define RBUF_CHAR 0x00FF /* * Transmit control register values. */ #define TCR_DTR2 0x0400 #define TCR_EN3 0x0008 #define TCR_EN2 0x0004 #define TCR_EN1 0x0002 #define TCR_EN0 0x0001 #define TCR_RTS2 0x0800 /* VS2000: LLBK_2 */ #define TCR_RTS3 0x0200 /* VS2000: DSRS_2 */ #define TCR_DTR3 0x0100 /* VS2000: RTS_2 */ /* * Line parameter register bits. */ #define LPR_RXENAB 0x1000 #define LPR_B50 0x0000 #define LPR_B75 0x0100 #define LPR_B110 0x0200 #define LPR_B134 0x0300 #define LPR_B150 0x0400 #define LPR_B300 0x0500 #define LPR_B600 0x0600 #define LPR_B1200 0x0700 #define LPR_B1800 0x0800 #define LPR_B2000 0x0900 #define LPR_B2400 0x0A00 #define LPR_B3600 0x0B00 #define LPR_B4800 0x0C00 #define LPR_B7200 0x0D00 #define LPR_B9600 0x0E00 #define LPR_B19200 0x0F00 #define LPR_B38400 0x0F00 #define LPR_OPAR 0x0080 #define LPR_PARENB 0x0040 #define LPR_2_STOP 0x0020 #define LPR_8_BIT_CHAR 0x0018 #define LPR_7_BIT_CHAR 0x0010 #define LPR_6_BIT_CHAR 0x0008 #define LPR_5_BIT_CHAR 0x0000 /* * Modem status register bits. */ #define MSR_DSR2 0x0200 #define MSR_RI2 0x0800 /* VS2000: 0x0004 */ #define MSR_CD2 0x0400 #define MSR_CTS2 0x0100 #define MSR_RI3 0x0008 /* VS2000: not used/available */ #define MSR_CD3 0x0004 /* VS2000: RI2 */ #define MSR_DSR3 0x0002 /* VS2000: MBZ */ #define MSR_CTS3 0x0001 /* VS2000: TMI_2 */ /* * The four serial ports. */ #define DCKBD_PORT 0 #define DCMOUSE_PORT 1 #define DCCOMM_PORT 2 #define DCPRINTER_PORT 3 /* bits in dm lsr, copied from dmreg.h */ #define DML_DSR 0000400 /* data set ready, not a real DM bit */ #define DML_RNG 0000200 /* ring */ #define DML_CAR 0000100 /* carrier detect */ #define DML_CTS 0000040 /* clear to send */ #define DML_SR 0000020 /* secondary receive */ #define DML_ST 0000010 /* secondary transmit */ #define DML_RTS 0000004 /* request to send */ #define DML_DTR 0000002 /* data terminal ready */ #define DML_LE 0000001 /* line enable */ #endif /* _DC7085 */