/* $OpenBSD: com_risc.c,v 1.3 1999/02/01 16:39:50 pefo Exp $ */ /* * Copyright (c) 1993, 1994 Charles Hannum. * Copyright (c) 1990 William F. Jolitz, TeleMuse * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This software is a component of "386BSD" developed by * William F. Jolitz, TeleMuse. * 4. Neither the name of the developer nor the name "386BSD" * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS A COMPONENT OF 386BSD DEVELOPED BY WILLIAM F. JOLITZ * AND IS INTENDED FOR RESEARCH AND EDUCATIONAL PURPOSES ONLY. THIS * SOFTWARE SHOULD NOT BE CONSIDERED TO BE A COMMERCIAL PRODUCT. * THE DEVELOPER URGES THAT USERS WHO REQUIRE A COMMERCIAL PRODUCT * NOT MAKE USE OF THIS WORK. * * FOR USERS WHO WISH TO UNDERSTAND THE 386BSD SYSTEM DEVELOPED * BY WILLIAM F. JOLITZ, WE RECOMMEND THE USER STUDY WRITTEN * REFERENCES SUCH AS THE "PORTING UNIX TO THE 386" SERIES * (BEGINNING JANUARY 1991 "DR. DOBBS JOURNAL", USA AND BEGINNING * JUNE 1991 "UNIX MAGAZIN", GERMANY) BY WILLIAM F. JOLITZ AND * LYNNE GREER JOLITZ, AS WELL AS OTHER BOOKS ON UNIX AND THE * ON-LINE 386BSD USER MANUAL BEFORE USE. A BOOK DISCUSSING THE INTERNALS * OF 386BSD ENTITLED "386BSD FROM THE INSIDE OUT" WILL BE AVAILABLE LATE 1992. * * THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPER BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Device Driver for AT parallel printer port */ #include #include #include #include #include #include #include #include /* XXX for isa_chipset_tag_t in com_softc */ #include #include #include /* Macros to clear/set/test flags. */ #define SET(t, f) (t) |= (f) #define CLR(t, f) (t) &= ~(f) #define ISSET(t, f) ((t) & (f)) #undef CONADDR /* This is stupid but using devs before config .. */ #define CONADDR 0xae400000 int com_risc_probe __P((struct device *, void *, void *)); void com_risc_attach __P((struct device *, struct device *, void *)); struct cfattach com_risc_ca = { sizeof(struct com_softc), com_risc_probe, com_risc_attach }; int com_risc_probe(parent, match, aux) struct device *parent; void *match, *aux; { bus_space_tag_t iot; bus_space_handle_t ioh; int iobase, needioh; int rv = 1; struct confargs *ca = aux; if(!BUS_MATCHNAME(ca, "com")) return(0); iobase = (long)BUS_CVTADDR(ca); iot = 0; needioh = 1; /* if it's in use as console, it's there. */ if (iobase == comconsaddr && !comconsattached) goto out; if (needioh && bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh)) { rv = 0; goto out; } rv = comprobe1(iot, ioh); if (needioh) bus_space_unmap(iot, ioh, COM_NPORTS); out: return (rv); } void com_risc_attach(parent, self, aux) struct device *parent, *self; void *aux; { struct com_softc *sc = (void *)self; int iobase; bus_space_tag_t iot; bus_space_handle_t ioh; struct confargs *ca = aux; sc->sc_hwflags = 0; sc->sc_swflags = 0; sc->sc_iobase = iobase = (bus_addr_t)BUS_CVTADDR(ca); sc->sc_ioh = ioh = (bus_space_handle_t)iobase; sc->sc_iot = iot = 0; if (iobase == comconsaddr) { comconsattached = 1; /* * Need to reset baud rate, etc. of next print so reset * comconsinit. Also make sure console is always "hardwired". */ delay(1000); /* wait for output to finish */ comconsinit = 0; SET(sc->sc_hwflags, COM_HW_CONSOLE); SET(sc->sc_swflags, COM_SW_SOFTCAR); } /* look for a NS 16550AF UART with FIFOs */ sc->sc_fifolen = 1; bus_space_write_1(iot, ioh, com_fifo, FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_14); delay(100); if (ISSET(bus_space_read_1(iot, ioh, com_iir), IIR_FIFO_MASK) == IIR_FIFO_MASK) { if (ISSET(bus_space_read_1(iot, ioh, com_fifo), FIFO_TRIGGER_14) == FIFO_TRIGGER_14) { SET(sc->sc_hwflags, COM_HW_FIFO); printf(": ns16550a, working fifo\n"); sc->sc_fifolen = 16; } else { printf(": ns16550, broken fifo\n"); } } else { printf(": ns8250 or ns16450, no fifo\n"); } bus_space_write_1(iot, ioh, com_fifo, 0); /* disable interrupts */ bus_space_write_1(iot, ioh, com_ier, 0); bus_space_write_1(iot, ioh, com_mcr, 0); BUS_INTR_ESTABLISH(ca, comintr, (void *)(long)sc); #ifdef KGDB if (kgdb_dev == makedev(commajor, unit)) { if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) kgdb_dev = -1; /* can't debug over console port */ else { cominit(iot, ioh, kgdb_rate); if (kgdb_debug_init) { /* * Print prefix of device name, * let kgdb_connect print the rest. */ printf("%s: ", sc->sc_dev.dv_xname); kgdb_connect(1); } else printf("%s: kgdb enabled\n", sc->sc_dev.dv_xname); } } #endif /* XXX maybe move up some? */ if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) printf("%s: console\n", sc->sc_dev.dv_xname); }