/* $OpenBSD: atareg.h,v 1.12 2004/09/24 07:15:22 grange Exp $ */ /* $NetBSD: atareg.h,v 1.5 1999/01/18 20:06:24 bouyer Exp $ */ /* * Copyright (c) 1998, 2001 Manuel Bouyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Manuel Bouyer. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DEV_ATA_ATAREG_H_ #define _DEV_ATA_ATAREG_H_ /* * Drive parameter structure for ATA/ATAPI. * Bit fields: WDC_* : common to ATA/ATAPI * ATA_* : ATA only * ATAPI_* : ATAPI only. */ struct ataparams { /* drive info */ u_int16_t atap_config; /* 0: general configuration */ #define WDC_CFG_ATAPI_MASK 0xc000 #define WDC_CFG_ATAPI 0x8000 #define ATA_CFG_REMOVABLE 0x0080 #define ATA_CFG_FIXED 0x0040 #define ATAPI_CFG_TYPE_MASK 0x1f00 #define ATAPI_CFG_TYPE(x) (((x) & ATAPI_CFG_TYPE_MASK) >> 8) #define ATAPI_CFG_TYPE_DIRECT 0x00 #define ATAPI_CFG_TYPE_SEQUENTIAL 0x01 #define ATAPI_CFG_TYPE_CDROM 0x05 #define ATAPI_CFG_TYPE_OPTICAL 0x07 #define ATAPI_CFG_TYPE_NODEVICE 0x1F #define ATAPI_CFG_REMOV 0x0080 #define ATAPI_CFG_DRQ_MASK 0x0060 #define ATAPI_CFG_STD_DRQ 0x0000 #define ATAPI_CFG_IRQ_DRQ 0x0020 #define ATAPI_CFG_ACCEL_DRQ 0x0040 #define ATAPI_CFG_CMD_MASK 0x0003 #define ATAPI_CFG_CMD_12 0x0000 #define ATAPI_CFG_CMD_16 0x0001 /* words 1-9 are ATA only */ u_int16_t atap_cylinders; /* 1: # of non-removable cylinders */ u_int16_t __reserved1; u_int16_t atap_heads; /* 3: # of heads */ u_int16_t __retired1[2]; /* 4-5: # of unform. bytes/track */ u_int16_t atap_sectors; /* 6: # of sectors */ u_int16_t __retired2[3]; u_int8_t atap_serial[20]; /* 10-19: serial number */ u_int16_t __retired3[2]; u_int16_t __obsolete1; u_int8_t atap_revision[8]; /* 23-26: firmware revision */ u_int8_t atap_model[40]; /* 27-46: model number */ u_int16_t atap_multi; /* 47: maximum sectors per irq (ATA) */ u_int16_t __reserved2; u_int16_t atap_capabilities1; /* 49: capability flags */ #define WDC_CAP_IORDY 0x0800 #define WDC_CAP_IORDY_DSBL 0x0400 #define WDC_CAP_LBA 0x0200 #define WDC_CAP_DMA 0x0100 #define ATA_CAP_STBY 0x2000 #define ATAPI_CAP_INTERL_DMA 0x8000 #define ATAPI_CAP_CMD_QUEUE 0x4000 #define ATAPI_CAP_OVERLP 0x2000 #define ATAPI_CAP_ATA_RST 0x1000 u_int16_t atap_capabilities2; /* 50: capability flags (ATA) */ #if BYTE_ORDER == LITTLE_ENDIAN u_int8_t __junk2; u_int8_t atap_oldpiotiming; /* 51: old PIO timing mode */ u_int8_t __junk3; u_int8_t atap_olddmatiming; /* 52: old DMA timing mode (ATA) */ #else u_int8_t atap_oldpiotiming; /* 51: old PIO timing mode */ u_int8_t __junk2; u_int8_t atap_olddmatiming; /* 52: old DMA timing mode (ATA) */ u_int8_t __junk3; #endif u_int16_t atap_extensions; /* 53: extensions supported */ #define WDC_EXT_UDMA_MODES 0x0004 #define WDC_EXT_MODES 0x0002 #define WDC_EXT_GEOM 0x0001 /* words 54-62 are ATA only */ u_int16_t atap_curcylinders; /* 54: current logical cylinders */ u_int16_t atap_curheads; /* 55: current logical heads */ u_int16_t atap_cursectors; /* 56: current logical sectors/tracks */ u_int16_t atap_curcapacity[2]; /* 57-58: current capacity */ u_int16_t atap_curmulti; /* 59: current multi-sector setting */ #define WDC_MULTI_VALID 0x0100 #define WDC_MULTI_MASK 0x00ff u_int16_t atap_capacity[2]; /* 60-61: total capacity (LBA only) */ u_int16_t __retired4; #if BYTE_ORDER == LITTLE_ENDIAN u_int8_t atap_dmamode_supp; /* 63: multiword DMA mode supported */ u_int8_t atap_dmamode_act; /* multiword DMA mode active */ u_int8_t atap_piomode_supp; /* 64: PIO mode supported */ u_int8_t __junk4; #else u_int8_t atap_dmamode_act; /* multiword DMA mode active */ u_int8_t atap_dmamode_supp; /* 63: multiword DMA mode supported */ u_int8_t __junk4; u_int8_t atap_piomode_supp; /* 64: PIO mode supported */ #endif u_int16_t atap_dmatiming_mimi; /* 65: minimum DMA cycle time */ u_int16_t atap_dmatiming_recom; /* 66: recommended DMA cycle time */ u_int16_t atap_piotiming; /* 67: mini PIO cycle time without FC */ u_int16_t atap_piotiming_iordy; /* 68: mini PIO cycle time with IORDY FC */ u_int16_t __reserved3[2]; /* words 71-72 are ATAPI only */ u_int16_t atap_pkt_br; /* 71: time (ns) to bus release */ u_int16_t atap_pkt_bsyclr; /* 72: tme to clear BSY after service */ u_int16_t __reserved4[2]; u_int16_t atap_queuedepth; /* 75: */ #define WDC_QUEUE_DEPTH_MASK 0x1f u_int16_t atap_sata_caps; /* 76: SATA capabilities */ #define SATA_SIGNAL_GEN1 0x0002 /* SATA Gen-1 signaling speed */ #define SATA_SIGNAL_GEN2 0x0004 /* SATA Gen-2 signaling speed */ #define SATA_NATIVE_CMDQ 0x0100 /* native command queuing */ #define SATA_HOST_PWR_MGMT 0x0200 /* power management (host) */ u_int16_t atap_sata_reserved; /* 77: reserved */ u_int16_t atap_sata_features_supp;/* 78: SATA features supported */ #define SATA_NONZERO_OFFSETS 0x0002 /* non-zero buffer offsets */ #define SATA_DMA_SETUP_AUTO 0x0004 /* DMA setup auto-activate */ #define SATA_DRIVE_PWR_MGMT 0x0008 /* power management (device) */ u_int16_t atap_sata_features_en; /* 79: SATA features enabled */ u_int16_t atap_ata_major; /* 80: Major version number */ #define WDC_VER_ATA1 0x0002 #define WDC_VER_ATA2 0x0004 #define WDC_VER_ATA3 0x0008 #define WDC_VER_ATA4 0x0010 #define WDC_VER_ATA5 0x0020 #define WDC_VER_ATA6 0x0040 #define WDC_VER_ATA7 0x0080 #define WDC_VER_ATA8 0x0100 #define WDC_VER_ATA9 0x0200 #define WDC_VER_ATA10 0x0400 #define WDC_VER_ATA11 0x0800 #define WDC_VER_ATA12 0x1000 #define WDC_VER_ATA13 0x2000 #define WDC_VER_ATA14 0x4000 u_int16_t atap_ata_minor; /* 81: Minor version number */ u_int16_t atap_cmd_set1; /* 82: command set supported */ #define WDC_CMD1_NOP 0x4000 #define WDC_CMD1_RB 0x2000 #define WDC_CMD1_WB 0x1000 #define WDC_CMD1_HPA 0x0400 #define WDC_CMD1_DVRST 0x0200 #define WDC_CMD1_SRV 0x0100 #define WDC_CMD1_RLSE 0x0080 #define WDC_CMD1_AHEAD 0x0040 #define WDC_CMD1_CACHE 0x0020 #define WDC_CMD1_PKT 0x0010 #define WDC_CMD1_PM 0x0008 #define WDC_CMD1_REMOV 0x0004 #define WDC_CMD1_SEC 0x0002 #define WDC_CMD1_SMART 0x0001 u_int16_t atap_cmd_set2; /* 83: command set supported */ #define ATAPI_CMD2_FCE 0x2000 /* Flush Cache Ext supported */ #define ATAPI_CMD2_FC 0x1000 /* Flush Cache supported */ #define ATAPI_CMD2_DCO 0x0800 /* Device Configuration Overlay supported */ #define ATAPI_CMD2_48AD 0x0400 /* 48bit address supported */ #define ATAPI_CMD2_AAM 0x0200 /* Automatic Acoustic Management supported */ #define ATAPI_CMD2_SM 0x0100 /* Set Max security extension supported */ #define ATAPI_CMD2_SF 0x0040 /* Set Features subcommand required */ #define ATAPI_CMD2_PUIS 0x0020 /* Power up in standby supported */ #define WDC_CMD2_RMSN 0x0010 #define ATA_CMD2_APM 0x0008 #define ATA_CMD2_CFA 0x0004 #define ATA_CMD2_RWQ 0x0002 #define WDC_CMD2_DM 0x0001 /* Download Microcode supported */ u_int16_t atap_cmd_ext; /* 84: command/features supp. ext. */ #define ATAPI_CMDE_MSER 0x0004 /* Media serial number supported */ #define ATAPI_CMDE_TEST 0x0002 /* SMART self-test supported */ #define ATAPI_CMDE_SLOG 0x0001 /* SMART error logging supported */ u_int16_t atap_cmd1_en; /* 85: cmd/features enabled */ /* bits are the same as atap_cmd_set1 */ u_int16_t atap_cmd2_en; /* 86: cmd/features enabled */ /* bits are the same as atap_cmd_set2 */ u_int16_t atap_cmd_def; /* 87: cmd/features default */ /* bits are NOT the same as atap_cmd_ext */ #if BYTE_ORDER == LITTLE_ENDIAN u_int8_t atap_udmamode_supp; /* 88: Ultra-DMA mode supported */ u_int8_t atap_udmamode_act; /* Ultra-DMA mode active */ #else u_int8_t atap_udmamode_act; /* Ultra-DMA mode active */ u_int8_t atap_udmamode_supp; /* 88: Ultra-DMA mode supported */ #endif /* 89-92 are ATA-only */ u_int16_t atap_seu_time; /* 89: Sec. Erase Unit compl. time */ u_int16_t atap_eseu_time; /* 90: Enhanced SEU compl. time */ u_int16_t atap_apm_val; /* 91: current APM value */ u_int16_t atap_mpasswd_rev; /* 92: Master Password revision */ u_int16_t atap_hwreset_res; /* 93: Hardware reset value */ #define ATA_HWRES_CBLID 0x2000 /* CBLID above Vih */ #define ATA_HWRES_D1_PDIAG 0x0800 /* Device 1 PDIAG detect OK */ #define ATA_HWRES_D1_CSEL 0x0400 /* Device 1 used CSEL for address */ #define ATA_HWRES_D1_JUMP 0x0200 /* Device 1 jumpered to address */ #define ATA_HWRES_D0_SEL 0x0040 /* Device 0 responds when Dev 1 selected */ #define ATA_HWRES_D0_DASP 0x0020 /* Device 0 DASP detect OK */ #define ATA_HWRES_D0_PDIAG 0x0010 /* Device 0 PDIAG detect OK */ #define ATA_HWRES_D0_DIAG 0x0008 /* Device 0 diag OK */ #define ATA_HWRES_D0_CSEL 0x0004 /* Device 0 used CSEL for address */ #define ATA_HWRES_D0_JUMP 0x0002 /* Device 0 jumpered to address */ #if BYTE_ORDER == LITTLE_ENDIAN u_int8_t atap_acoustic_val; /* 94: Current acoustic level */ u_int8_t atap_acoustic_def; /* recommended level */ #else u_int8_t atap_acoustic_def; /* recommended level */ u_int8_t atap_acoustic_val; /* 94: Current acoustic level */ #endif u_int16_t __reserved6[5]; /* 95-99: reserved */ u_int16_t atap_max_lba[4]; /* 100-103: Max. user LBA add */ u_int16_t __reserved7[23]; /* 104-126: reserved */ u_int16_t atap_rmsn_supp; /* 127: remov. media status notif. */ #define WDC_RMSN_SUPP_MASK 0x0003 #define WDC_RMSN_SUPP 0x0001 u_int16_t atap_sec_st; /* 128: security status */ #define WDC_SEC_LEV_MAX 0x0100 #define WDC_SEC_ESE_SUPP 0x0020 #define WDC_SEC_EXP 0x0010 #define WDC_SEC_FROZEN 0x0008 #define WDC_SEC_LOCKED 0x0004 #define WDC_SEC_EN 0x0002 #define WDC_SEC_SUPP 0x0001 u_int16_t __reserved8[31]; /* 129-159: vendor specific */ u_int16_t atap_cfa_power; /* 160: CFA powermode */ #define ATAPI_CFA_MAX_MASK 0x0FFF #define ATAPI_CFA_MODE1_DIS 0x1000 /* CFA Mode 1 Disabled */ #define ATAPI_CFA_MODE1_REQ 0x2000 /* CFA Mode 1 Required */ #define ATAPI_CFA_WORD160 0x8000 /* Word 160 supported */ u_int16_t __reserved9[15]; /* 161-175: reserved for CFA */ u_int8_t atap_media_serial[60]; /* 176-205: media serial number */ u_int16_t __reserved10[49]; /* 206-254: reserved */ #if BYTE_ORDER == LITTLE_ENDIAN u_int8_t atap_signature; /* 255: Signature */ u_int8_t atap_checksum; /* Checksum */ #else u_int8_t atap_checksum; /* Checksum */ u_int8_t atap_signature; /* 255: Signature */ #endif }; #endif /* !_DEV_ATA_ATAREG_H_ */