/* $OpenBSD: atavar.h,v 1.21 2015/08/17 15:36:29 krw Exp $ */ /* $NetBSD: atavar.h,v 1.13 1999/03/10 13:11:43 bouyer Exp $ */ /* * Copyright (c) 1998, 2001 Manuel Bouyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #ifndef _DEV_ATA_ATAVAR_H_ #define _DEV_ATA_ATAVAR_H_ /* High-level functions and structures used by both ATA and ATAPI devices */ #include /* Datas common to drives and controller drivers */ struct ata_drive_datas { u_int8_t drive; /* drive number */ int8_t ata_vers; /* ATA version supported */ u_int16_t drive_flags; /* bitmask for drives present/absent and cap */ #define DRIVE_ATA 0x0001 #define DRIVE_ATAPI 0x0002 #define DRIVE_OLD 0x0004 #define DRIVE (DRIVE_ATA|DRIVE_ATAPI|DRIVE_OLD) #define DRIVE_CAP32 0x0008 #define DRIVE_DMA 0x0010 #define DRIVE_UDMA 0x0020 #define DRIVE_MODE 0x0040 /* the drive reported its mode */ #define DRIVE_RESET 0x0080 /* reset the drive state at next xfer */ #define DRIVE_DMAERR 0x0100 /* Udma transfer had crc error, don't try DMA */ #define DRIVE_DSCBA 0x0200 /* DSC in buffer availability mode */ #define DRIVE_DSCWAIT 0x0400 /* In wait for DSC to be asserted */ #define DRIVE_DEVICE_RESET 0x0800 /* Drive supports DEVICE RESET command */ #define DRIVE_SATA 0x1000 /* SATA drive */ /* * Current setting of drive's PIO, DMA and UDMA modes. * Is initialised by the disks drivers at attach time, and may be * changed later by the controller's code if needed */ u_int8_t PIO_mode; /* Current setting of drive's PIO mode */ u_int8_t DMA_mode; /* Current setting of drive's DMA mode */ u_int8_t UDMA_mode; /* Current setting of drive's UDMA mode */ /* Supported modes for this drive */ u_int8_t PIO_cap; /* supported drive's PIO mode */ u_int8_t DMA_cap; /* supported drive's DMA mode */ u_int8_t UDMA_cap; /* supported drive's UDMA mode */ /* * Drive state. This is drive-type (ATA or ATAPI) dependant * This is reset to 0 after a channel reset. */ u_int8_t state; #define ACAP_LEN 0x01 /* 16 byte commands */ #define ACAP_DSC 0x02 /* use DSC signalling */ /* 0x20-0x40 reserved for ATAPI_CFG_DRQ_MASK */ u_int8_t atapi_cap; /* Keeps track of the number of resets that have occurred in a row without a successful command completion. */ u_int8_t n_resets; u_int8_t n_dmaerrs; u_int32_t n_xfers; #define NERRS_MAX 4 #define NXFER 1000 char drive_name[31]; int cf_flags; void *chnl_softc; /* channel softc */ struct ataparams id; }; /* ATA/ATAPI common attachement datas */ struct ata_atapi_attach { u_int8_t aa_type; /* Type of device */ #define T_ATA 0 #define T_ATAPI 1 u_int8_t aa_channel; /* controller's channel */ u_int8_t aa_openings; /* Number of simultaneous commands possible */ struct ata_drive_datas *aa_drv_data; void *aa_bus_private; /* infos specifics to this bus */ }; /* User config flags that force (or disable) the use of a mode */ #define ATA_CONFIG_PIO_MODES 0x0007 #define ATA_CONFIG_PIO_SET 0x0008 #define ATA_CONFIG_PIO_OFF 0 #define ATA_CONFIG_DMA_MODES 0x0070 #define ATA_CONFIG_DMA_SET 0x0080 #define ATA_CONFIG_DMA_DISABLE 0x0070 #define ATA_CONFIG_DMA_OFF 4 #define ATA_CONFIG_UDMA_MODES 0x0700 #define ATA_CONFIG_UDMA_SET 0x0800 #define ATA_CONFIG_UDMA_DISABLE 0x0700 #define ATA_CONFIG_UDMA_OFF 8 /* * ATA/ATAPI commands description * * This structure defines the interface between the ATA/ATAPI device driver * and the controller for short commands. It contains the command's parameter, * the len of data's to read/write (if any), and a function to call upon * completion. * If no sleep is allowed, the driver can poll for command completion. * Once the command completed, if the error registed is valid, the flag * AT_ERROR is set and the error register value is copied to r_error . * A separate interface is needed for read/write or ATAPI packet commands * (which need multiple interrupts per commands). */ struct wdc_command { u_int8_t r_command; /* Parameters to upload to registers */ u_int8_t r_head; u_int16_t r_cyl; u_int8_t r_sector; u_int8_t r_count; u_int8_t r_features; u_int8_t r_st_bmask; /* status register mask to wait for before command */ u_int8_t r_st_pmask; /* status register mask to wait for after command */ u_int8_t r_error; /* error register after command done */ volatile u_int16_t flags; #define AT_READ 0x0001 /* There is data to read */ #define AT_WRITE 0x0002 /* There is data to write (excl. with AT_READ) */ #define AT_WAIT 0x0008 /* wait in controller code for command completion */ #define AT_POLL 0x0010 /* poll for command completion (no interrupts) */ #define AT_DONE 0x0020 /* command is done */ #define AT_ERROR 0x0040 /* command is done with error */ #define AT_TIMEOU 0x0080 /* command timed out */ #define AT_DF 0x0100 /* Drive fault */ #define AT_READREG 0x0200 /* Read registers on completion */ int timeout; /* timeout (in ms) */ void *data; /* Data buffer address */ int bcount; /* number of bytes to transfer */ void (*callback)(void *); /* command to call once command completed */ void *callback_arg; /* argument passed to *callback() */ }; extern int at_poll; int wdc_exec_command(struct ata_drive_datas *, struct wdc_command*); #define WDC_COMPLETE 0x01 #define WDC_QUEUED 0x02 #define WDC_TRY_AGAIN 0x03 void wdc_probe_caps(struct ata_drive_datas*, struct ataparams *); void wdc_print_caps(struct ata_drive_datas*); int wdc_downgrade_mode(struct ata_drive_datas*); void wdc_reset_channel(struct ata_drive_datas *, int); int wdc_ata_addref(struct ata_drive_datas *); void wdc_ata_delref(struct ata_drive_datas *); void wdc_ata_kill_pending(struct ata_drive_datas *); int ata_get_params(struct ata_drive_datas*, u_int8_t, struct ataparams *); int ata_set_mode(struct ata_drive_datas*, u_int8_t, u_int8_t); /* return code for these cmds */ #define CMD_OK 0 #define CMD_ERR 1 #define CMD_AGAIN 2 void ata_dmaerr(struct ata_drive_datas *); void ata_perror(struct ata_drive_datas *, int, char *, size_t); #endif /* !_DEV_ATA_ATAVAR_H_ */