/* $OpenBSD: amldwusb.c,v 1.1 2019/08/29 17:20:03 kettenis Exp $ */ /* * Copyright (c) 2019 Mark kettenis * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #include #include #include #include #include #include #include #include #include #include #include /* Glue registers. */ #define U2P_R0(i) (0x00 + (i) * 0x20) #define U2P_R0_HOST_DEVICE (1 << 0) #define U2P_R0_POWER_OK (1 << 1) #define U2P_R0_HAST_MODE (1 << 2) #define U2P_R0_POWER_ON_RESET (1 << 3) #define U2P_R0_ID_PULLUP (1 << 4) #define U2P_R0_DRV_VBUS (1 << 5) #define U2P_R1(i) (0x04 + (i) * 0x20) #define U2P_R1_PHY_READY (1 << 0) #define U2P_R1_ID_DIG (1 << 1) #define U2P_R1_OTG_SESSION_VALID (1 << 2) #define U2P_R1_VBUS_VALID (1 << 3) #define USB_R0 0x80 #define USB_R0_P30_LANE0_TX2RX_LOOPBACK (1 << 17) #define USB_R0_P30_LANE0_EXT_PCLK_REQ (1 << 18) #define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK (0x3ff << 19) #define USB_R0_P30_PCS_RX_LOS_MASK_VAL_SHIFT 19 #define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK (0x3 << 29) #define USB_R0_U2D_SS_SCALEDOWN_MODE_SHIFT 29 #define USB_R0_U2D_ACT (1U << 31) #define USB_R1 0x84 #define USB_R1_U3H_BIGENDIAN_GS (1 << 0) #define USB_R1_U3H_PME_ENABLE (1 << 1) #define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK (0x7 << 2) #define USB_R1_U3H_HUB_PORT_OVERCURRENT_SHIFT 2 #define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK (0x7 << 7) #define USB_R1_U3H_HUB_PORT_PERM_ATTACH_SHIFT 7 #define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK (0x3 << 12) #define USB_R1_U3H_HOST_U2_PORT_DISABLE_SHIFT 12 #define USB_R1_U3H_HOST_U3_PORT_DISABLE (1 << 16) #define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT (1 << 17) #define USB_R1_U3H_HOST_MSI_ENABLE (1 << 18) #define USB_R1_U3H_FLADJ_30MHZ_REG_MASK (0x3f << 19) #define USB_R1_U3H_FLADJ_30MHZ_REG_SHIFT 19 #define USB_R1_P30_PCS_TX_SWING_FULL_MASK (0x7f << 25) #define USB_R1_P30_PCS_TX_SWING_FULL_SHIFT 25 #define USB_R2 0x88 #define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK (0x3f << 20) #define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_SHIFT 20 #define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK (0x3f << 26) #define USB_R2_P30_PCS_TX_DEEMPH_6DB_SHIFT 26 #define USB_R3 0x8c #define USB_R3_P30_SSC_ENABLE (1 << 0) #define USB_R3_P30_SSC_RANGE_MASK (0x7 << 1) #define USB_R3_P30_SSC_RANGE_SHIFT 1 #define USB_R3_P30_SSC_REF_CLK_SEL_MASK (0x1ff << 4) #define USB_R3_P30_SSC_REF_CLK_SEL_SHIFT 4 #define USB_R3_P30_REF_SSP_EN (1 << 13) #define USB_R4 0x90 #define USB_R4_P21_PORT_RESET_0 (1 << 0) #define USB_R4_P21_SLEEP_M0 (1 << 1) #define USB_R4_MEM_PD_MASK (0x3 << 2) #define USB_R4_MEM_PD_SHIFT 2 #define USB_R4_P21_ONLY (1 << 4) #define USB_R5 0x94 #define USB_R5_ID_DIG_SYNC (1 << 0) #define USB_R5_ID_DIG_REG (1 << 1) #define USB_R5_ID_DIG_CFG_MASK (0x3 << 2) #define USB_R5_ID_DIG_CFG_SHIFT 2 #define USB_R5_ID_DIG_EN_0 (1 << 4) #define USB_R5_ID_DIG_EN_1 (1 << 5) #define USB_R5_ID_DIG_CURR (1 << 6) #define USB_R5_ID_DIG_IRQ (1 << 7) #define USB_R5_ID_DIG_TH_MASK (0xff << 8) #define USB_R5_ID_DIG_TH_SHIFT 8 #define USB_R5_ID_DIG_CNT_MASK (0xff << 16) #define USB_R5_ID_DIG_CNT_SHIFT 16 #define HREAD4(sc, reg) \ (bus_space_read_4((sc)->sc_iot, (sc)->sc_ioh, (reg))) #define HWRITE4(sc, reg, val) \ bus_space_write_4((sc)->sc_iot, (sc)->sc_ioh, (reg), (val)) #define HSET4(sc, reg, bits) \ HWRITE4((sc), (reg), HREAD4((sc), (reg)) | (bits)) #define HCLR4(sc, reg, bits) \ HWRITE4((sc), (reg), HREAD4((sc), (reg)) & ~(bits)) struct amldwusb_softc { struct simplebus_softc sc_sbus; bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; }; int amldwusb_match(struct device *, void *, void *); void amldwusb_attach(struct device *, struct device *, void *); struct cfattach amldwusb_ca = { sizeof(struct amldwusb_softc), amldwusb_match, amldwusb_attach }; struct cfdriver amldwusb_cd = { NULL, "amldwusb", DV_DULL }; void amldwusb_init_usb2(struct amldwusb_softc *); void amldwusb_init_usb3(struct amldwusb_softc *); void amldwusb_init_phys(struct amldwusb_softc *); int amldwusb_match(struct device *parent, void *match, void *aux) { struct fdt_attach_args *faa = aux; return OF_is_compatible(faa->fa_node, "amlogic,meson-g12a-usb-ctrl"); } void amldwusb_attach(struct device *parent, struct device *self, void *aux) { struct amldwusb_softc *sc = (struct amldwusb_softc *)self; struct fdt_attach_args *faa = aux; uint32_t vbus_supply; uint32_t reg; if (faa->fa_nreg < 1) { printf(": no registers\n"); return; } sc->sc_iot = faa->fa_iot; if (bus_space_map(sc->sc_iot, faa->fa_reg[0].addr, faa->fa_reg[0].size, 0, &sc->sc_ioh)) { printf(": can't map registers\n"); return; } clock_enable_all(faa->fa_node); reset_assert_all(faa->fa_node); delay(10); reset_deassert_all(faa->fa_node); vbus_supply = OF_getpropint(faa->fa_node, "vbus-supply", 0); if (vbus_supply) regulator_enable(vbus_supply); amldwusb_init_usb2(sc); reg = HREAD4(sc, USB_R1); reg &= ~USB_R1_U3H_FLADJ_30MHZ_REG_MASK; reg |= (0x20 << USB_R1_U3H_FLADJ_30MHZ_REG_SHIFT); HWRITE4(sc, USB_R1, reg); HSET4(sc, USB_R5, USB_R5_ID_DIG_EN_0); HSET4(sc, USB_R5, USB_R5_ID_DIG_EN_1); reg = HREAD4(sc, USB_R5); reg &= ~USB_R5_ID_DIG_TH_MASK; reg |= (0xff << USB_R5_ID_DIG_TH_SHIFT); HWRITE4(sc, USB_R5, reg); amldwusb_init_usb3(sc); /* Initialize PHYs. */ phy_enable(faa->fa_node, "usb2-phy0"); phy_enable(faa->fa_node, "usb2-phy1"); phy_enable(faa->fa_node, "usb3-phy0"); simplebus_attach(parent, &sc->sc_sbus.sc_dev, faa); } void amldwusb_init_usb2(struct amldwusb_softc *sc) { int i; for (i = 0; i < 3; i++) { HSET4(sc, U2P_R0(i), U2P_R0_POWER_ON_RESET); /* We don't support device mode, so always force host mode. */ HSET4(sc, U2P_R0(i), U2P_R0_HOST_DEVICE); HCLR4(sc, U2P_R0(i), U2P_R0_POWER_ON_RESET); } } void amldwusb_init_usb3(struct amldwusb_softc *sc) { uint32_t reg; reg = HREAD4(sc, USB_R3); reg &= ~USB_R3_P30_SSC_RANGE_MASK; reg |= USB_R3_P30_SSC_ENABLE; reg |= (2 << USB_R3_P30_SSC_RANGE_SHIFT); reg |= USB_R3_P30_REF_SSP_EN; HWRITE4(sc, USB_R3, reg); delay(2); reg = HREAD4(sc, USB_R2); reg &= ~USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK; reg |= (0x15 << USB_R2_P30_PCS_TX_DEEMPH_3P5DB_SHIFT); HWRITE4(sc, USB_R2, reg); reg = HREAD4(sc, USB_R2); reg &= ~USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK; reg |= (0x15 << USB_R2_P30_PCS_TX_DEEMPH_6DB_SHIFT); HWRITE4(sc, USB_R2, reg); delay(2); HSET4(sc, USB_R1, USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT); reg = HREAD4(sc, USB_R1); reg &= ~USB_R1_P30_PCS_TX_SWING_FULL_MASK; reg |= (0x7f << USB_R1_P30_PCS_TX_SWING_FULL_SHIFT); HWRITE4(sc, USB_R1, reg); }