/* $OpenBSD: imxuart.c,v 1.4 2018/08/06 10:52:30 patrick Exp $ */ /* * Copyright (c) 2005 Dale Rahn * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB #include #endif #include #include #include #include #include #include #define DEVUNIT(x) (minor(x) & 0x7f) #define DEVCUA(x) (minor(x) & 0x80) struct imxuart_softc { struct device sc_dev; bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; int sc_node; struct soft_intrhand *sc_si; void *sc_irq; struct tty *sc_tty; struct timeout sc_diag_tmo; struct timeout sc_dtr_tmo; int sc_overflows; int sc_floods; int sc_errors; int sc_halt; u_int16_t sc_ucr1; u_int16_t sc_ucr2; u_int16_t sc_ucr3; u_int16_t sc_ucr4; u_int8_t sc_hwflags; #define COM_HW_NOIEN 0x01 #define COM_HW_FIFO 0x02 #define COM_HW_SIR 0x20 #define COM_HW_CONSOLE 0x40 u_int8_t sc_swflags; #define COM_SW_SOFTCAR 0x01 #define COM_SW_CLOCAL 0x02 #define COM_SW_CRTSCTS 0x04 #define COM_SW_MDMBUF 0x08 #define COM_SW_PPS 0x10 u_int8_t sc_initialize; u_int8_t sc_cua; u_int16_t *sc_ibuf, *sc_ibufp, *sc_ibufhigh, *sc_ibufend; #define IMXUART_IBUFSIZE 128 #define IMXUART_IHIGHWATER 100 u_int16_t sc_ibufs[2][IMXUART_IBUFSIZE]; }; int imxuart_match(struct device *, void *, void *); void imxuart_attach(struct device *, struct device *, void *); void imxuartcnprobe(struct consdev *cp); void imxuartcninit(struct consdev *cp); int imxuartcnattach(bus_space_tag_t iot, bus_addr_t iobase, int rate, tcflag_t cflag); int imxuartcngetc(dev_t dev); void imxuartcnputc(dev_t dev, int c); void imxuartcnpollc(dev_t dev, int on); int imxuart_param(struct tty *tp, struct termios *t); void imxuart_start(struct tty *); void imxuart_pwroff(struct imxuart_softc *sc); void imxuart_diag(void *arg); void imxuart_raisedtr(void *arg); void imxuart_softint(void *arg); struct imxuart_softc *imxuart_sc(dev_t dev); int imxuart_intr(void *); /* XXX - we imitate 'com' serial ports and take over their entry points */ /* XXX: These belong elsewhere */ cdev_decl(com); cdev_decl(imxuart); struct cfdriver imxuart_cd = { NULL, "imxuart", DV_TTY }; struct cfattach imxuart_ca = { sizeof(struct imxuart_softc), imxuart_match, imxuart_attach }; bus_space_tag_t imxuartconsiot; bus_space_handle_t imxuartconsioh; bus_addr_t imxuartconsaddr; tcflag_t imxuartconscflag = TTYDEF_CFLAG; int imxuartdefaultrate = B115200; struct cdevsw imxuartdev = cdev_tty_init(3/*XXX NIMXUART */ ,imxuart); /* 12: serial port */ void imxuart_init_cons(void) { struct fdt_reg reg; void *node; if ((node = fdt_find_cons("fsl,imx21-uart")) == NULL && (node = fdt_find_cons("fsl,imx6q-uart")) == NULL) return; if (fdt_get_reg(node, 0, ®)) return; imxuartcnattach(fdt_cons_bs_tag, reg.addr, B115200, TTYDEF_CFLAG); } int imxuart_match(struct device *parent, void *match, void *aux) { struct fdt_attach_args *faa = aux; return (OF_is_compatible(faa->fa_node, "fsl,imx21-uart") || OF_is_compatible(faa->fa_node, "fsl,imx6q-uart")); } void imxuart_attach(struct device *parent, struct device *self, void *aux) { struct imxuart_softc *sc = (struct imxuart_softc *) self; struct fdt_attach_args *faa = aux; int maj; if (faa->fa_nreg < 1) return; pinctrl_byname(faa->fa_node, "default"); sc->sc_irq = fdt_intr_establish(faa->fa_node, IPL_TTY, imxuart_intr, sc, sc->sc_dev.dv_xname); sc->sc_node = faa->fa_node; sc->sc_iot = faa->fa_iot; if (bus_space_map(sc->sc_iot, faa->fa_reg[0].addr, faa->fa_reg[0].size, 0, &sc->sc_ioh)) panic("imxuartattach: bus_space_map failed!"); if (faa->fa_reg[0].addr == imxuartconsaddr) { /* Locate the major number. */ for (maj = 0; maj < nchrdev; maj++) if (cdevsw[maj].d_open == imxuartopen) break; cn_tab->cn_dev = makedev(maj, sc->sc_dev.dv_unit); printf(": console"); } timeout_set(&sc->sc_diag_tmo, imxuart_diag, sc); timeout_set(&sc->sc_dtr_tmo, imxuart_raisedtr, sc); sc->sc_si = softintr_establish(IPL_TTY, imxuart_softint, sc); if(sc->sc_si == NULL) panic("%s: can't establish soft interrupt.", sc->sc_dev.dv_xname); printf("\n"); } int imxuart_intr(void *arg) { struct imxuart_softc *sc = arg; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct tty *tp = sc->sc_tty; u_int16_t sr1; u_int16_t *p; u_int16_t c; sr1 = bus_space_read_2(iot, ioh, IMXUART_USR1); if (ISSET(sr1, IMXUART_SR1_TRDY) && ISSET(tp->t_state, TS_BUSY)) { CLR(tp->t_state, TS_BUSY | TS_FLUSH); if (sc->sc_halt > 0) wakeup(&tp->t_outq); (*linesw[tp->t_line].l_start)(tp); } if (sc->sc_tty == NULL) return(0); if(!ISSET(bus_space_read_2(iot, ioh, IMXUART_USR2), IMXUART_SR2_RDR)) return 0; p = sc->sc_ibufp; while(ISSET(bus_space_read_2(iot, ioh, IMXUART_USR2), IMXUART_SR2_RDR)) { c = bus_space_read_1(iot, ioh, IMXUART_URXD); if (p >= sc->sc_ibufend) { sc->sc_floods++; if (sc->sc_errors++ == 0) timeout_add(&sc->sc_diag_tmo, 60 * hz); } else { *p++ = c; if (p == sc->sc_ibufhigh && ISSET(tp->t_cflag, CRTSCTS)) { /* XXX */ CLR(sc->sc_ucr3, IMXUART_CR3_DSR); bus_space_write_2(iot, ioh, IMXUART_UCR3, sc->sc_ucr3); } } /* XXX - msr stuff ? */ } sc->sc_ibufp = p; softintr_schedule(sc->sc_si); return 1; } int imxuart_param(struct tty *tp, struct termios *t) { struct imxuart_softc *sc = imxuart_cd.cd_devs[DEVUNIT(tp->t_dev)]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int ospeed = t->c_ospeed; int error; tcflag_t oldcflag; if (t->c_ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed)) return EINVAL; switch (ISSET(t->c_cflag, CSIZE)) { case CS5: return EINVAL; case CS6: return EINVAL; case CS7: CLR(sc->sc_ucr2, IMXUART_CR2_WS); break; case CS8: SET(sc->sc_ucr2, IMXUART_CR2_WS); break; } // bus_space_write_2(iot, ioh, IMXUART_UCR2, sc->sc_ucr2); if (ISSET(t->c_cflag, PARENB)) { SET(sc->sc_ucr2, IMXUART_CR2_PREN); bus_space_write_2(iot, ioh, IMXUART_UCR2, sc->sc_ucr2); } /* STOPB - XXX */ if (ospeed == 0) { /* lower dtr */ } if (ospeed != 0) { while (ISSET(tp->t_state, TS_BUSY)) { ++sc->sc_halt; error = ttysleep(tp, &tp->t_outq, TTOPRI | PCATCH, "imxuartprm", 0); --sc->sc_halt; if (error) { imxuart_start(tp); return (error); } } /* set speed */ } /* setup fifo */ /* When not using CRTSCTS, RTS follows DTR. */ /* sc->sc_dtr = MCR_DTR; */ /* and copy to tty */ tp->t_ispeed = t->c_ispeed; tp->t_ospeed = t->c_ospeed; oldcflag = tp->t_cflag; tp->t_cflag = t->c_cflag; /* * If DCD is off and MDMBUF is changed, ask the tty layer if we should * stop the device. */ /* XXX */ imxuart_start(tp); return 0; } void imxuart_start(struct tty *tp) { struct imxuart_softc *sc = imxuart_cd.cd_devs[DEVUNIT(tp->t_dev)]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int s; s = spltty(); if (ISSET(tp->t_state, TS_BUSY)) { splx(s); return; } if (ISSET(tp->t_state, TS_TIMEOUT | TS_TTSTOP)) goto stopped; #ifdef DAMNFUCKSHIT /* clear to send (IE the RTS pin on this shit) is not directly \ * readable - skip check for now */ if (ISSET(tp->t_cflag, CRTSCTS) && !ISSET(sc->sc_msr, IMXUART_CTS)) goto stopped; #endif if (tp->t_outq.c_cc <= tp->t_lowat) { if (ISSET(tp->t_state, TS_ASLEEP)) { CLR(tp->t_state, TS_ASLEEP); wakeup(&tp->t_outq); } if (tp->t_outq.c_cc == 0) goto stopped; selwakeup(&tp->t_wsel); } SET(tp->t_state, TS_BUSY); if (!ISSET(sc->sc_ucr1, IMXUART_CR1_TXMPTYEN)) { SET(sc->sc_ucr1, IMXUART_CR1_TXMPTYEN); bus_space_write_2(iot, ioh, IMXUART_UCR1, sc->sc_ucr1); } { u_char buf[32]; int n = q_to_b(&tp->t_outq, buf, 32/*XXX*/); int i; for (i = 0; i < n; i++) bus_space_write_1(iot, ioh, IMXUART_UTXD, buf[i]); } splx(s); return; stopped: if (ISSET(sc->sc_ucr1, IMXUART_CR1_TXMPTYEN)) { CLR(sc->sc_ucr1, IMXUART_CR1_TXMPTYEN); bus_space_write_2(iot, ioh, IMXUART_UCR1, sc->sc_ucr1); } splx(s); } void imxuart_pwroff(struct imxuart_softc *sc) { } void imxuart_diag(void *arg) { struct imxuart_softc *sc = arg; int overflows, floods; int s; s = spltty(); sc->sc_errors = 0; overflows = sc->sc_overflows; sc->sc_overflows = 0; floods = sc->sc_floods; sc->sc_floods = 0; splx(s); log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf overflow%s\n", sc->sc_dev.dv_xname, overflows, overflows == 1 ? "" : "s", floods, floods == 1 ? "" : "s"); } void imxuart_raisedtr(void *arg) { struct imxuart_softc *sc = arg; SET(sc->sc_ucr3, IMXUART_CR3_DSR); /* XXX */ bus_space_write_2(sc->sc_iot, sc->sc_ioh, IMXUART_UCR3, sc->sc_ucr3); } void imxuart_softint(void *arg) { struct imxuart_softc *sc = arg; struct tty *tp; u_int16_t *ibufp; u_int16_t *ibufend; int c; int err; int s; if (sc == NULL || sc->sc_ibufp == sc->sc_ibuf) return; tp = sc->sc_tty; s = spltty(); ibufp = sc->sc_ibuf; ibufend = sc->sc_ibufp; if (ibufp == ibufend || tp == NULL || !ISSET(tp->t_state, TS_ISOPEN)) { splx(s); return; } sc->sc_ibufp = sc->sc_ibuf = (ibufp == sc->sc_ibufs[0]) ? sc->sc_ibufs[1] : sc->sc_ibufs[0]; sc->sc_ibufhigh = sc->sc_ibuf + IMXUART_IHIGHWATER; sc->sc_ibufend = sc->sc_ibuf + IMXUART_IBUFSIZE; if (ISSET(tp->t_cflag, CRTSCTS) && !ISSET(sc->sc_ucr3, IMXUART_CR3_DSR)) { /* XXX */ SET(sc->sc_ucr3, IMXUART_CR3_DSR); bus_space_write_2(sc->sc_iot, sc->sc_ioh, IMXUART_UCR3, sc->sc_ucr3); } splx(s); while (ibufp < ibufend) { c = *ibufp++; if (ISSET(c, IMXUART_RX_OVERRUN)) { sc->sc_overflows++; if (sc->sc_errors++ == 0) timeout_add(&sc->sc_diag_tmo, 60 * hz); } /* This is ugly, but fast. */ err = 0; if (ISSET(c, IMXUART_RX_PRERR)) err |= TTY_PE; if (ISSET(c, IMXUART_RX_FRMERR)) err |= TTY_FE; c = (c & 0xff) | err; (*linesw[tp->t_line].l_rint)(c, tp); } } int imxuartopen(dev_t dev, int flag, int mode, struct proc *p) { int unit = DEVUNIT(dev); struct imxuart_softc *sc; bus_space_tag_t iot; bus_space_handle_t ioh; struct tty *tp; int s; int error = 0; if (unit >= imxuart_cd.cd_ndevs) return ENXIO; sc = imxuart_cd.cd_devs[unit]; if (sc == NULL) return ENXIO; s = spltty(); if (sc->sc_tty == NULL) tp = sc->sc_tty = ttymalloc(0); else tp = sc->sc_tty; splx(s); tp->t_oproc = imxuart_start; tp->t_param = imxuart_param; tp->t_dev = dev; if (!ISSET(tp->t_state, TS_ISOPEN)) { SET(tp->t_state, TS_WOPEN); ttychars(tp); tp->t_iflag = TTYDEF_IFLAG; tp->t_oflag = TTYDEF_OFLAG; if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) tp->t_cflag = imxuartconscflag; else tp->t_cflag = TTYDEF_CFLAG; if (ISSET(sc->sc_swflags, COM_SW_CLOCAL)) SET(tp->t_cflag, CLOCAL); if (ISSET(sc->sc_swflags, COM_SW_CRTSCTS)) SET(tp->t_cflag, CRTSCTS); if (ISSET(sc->sc_swflags, COM_SW_MDMBUF)) SET(tp->t_cflag, MDMBUF); tp->t_lflag = TTYDEF_LFLAG; tp->t_ispeed = tp->t_ospeed = imxuartdefaultrate; s = spltty(); sc->sc_initialize = 1; imxuart_param(tp, &tp->t_termios); ttsetwater(tp); sc->sc_ibufp = sc->sc_ibuf = sc->sc_ibufs[0]; sc->sc_ibufhigh = sc->sc_ibuf + IMXUART_IHIGHWATER; sc->sc_ibufend = sc->sc_ibuf + IMXUART_IBUFSIZE; iot = sc->sc_iot; ioh = sc->sc_ioh; sc->sc_ucr1 = bus_space_read_2(iot, ioh, IMXUART_UCR1); sc->sc_ucr2 = bus_space_read_2(iot, ioh, IMXUART_UCR2); sc->sc_ucr3 = bus_space_read_2(iot, ioh, IMXUART_UCR3); sc->sc_ucr4 = bus_space_read_2(iot, ioh, IMXUART_UCR4); /* interrupt after one char on tx/rx */ /* reference frequency divider: 1 */ bus_space_write_2(iot, ioh, IMXUART_UFCR, 1 << IMXUART_FCR_TXTL_SH | 5 << IMXUART_FCR_RFDIV_SH | 1 << IMXUART_FCR_RXTL_SH); bus_space_write_2(iot, ioh, IMXUART_UBIR, (imxuartdefaultrate / 100) - 1); /* formula: clk / (rfdiv * 1600) */ bus_space_write_2(iot, ioh, IMXUART_UBMR, clock_get_frequency(sc->sc_node, "per") / 1600); SET(sc->sc_ucr1, IMXUART_CR1_EN|IMXUART_CR1_RRDYEN); SET(sc->sc_ucr2, IMXUART_CR2_TXEN|IMXUART_CR2_RXEN); bus_space_write_2(iot, ioh, IMXUART_UCR1, sc->sc_ucr1); bus_space_write_2(iot, ioh, IMXUART_UCR2, sc->sc_ucr2); /* sc->sc_mcr = MCR_DTR | MCR_RTS; XXX */ SET(sc->sc_ucr3, IMXUART_CR3_DSR); /* XXX */ bus_space_write_2(iot, ioh, IMXUART_UCR3, sc->sc_ucr3); SET(tp->t_state, TS_CARR_ON); /* XXX */ } else if (ISSET(tp->t_state, TS_XCLUDE) && p->p_ucred->cr_uid != 0) return EBUSY; else s = spltty(); if (DEVCUA(dev)) { if (ISSET(tp->t_state, TS_ISOPEN)) { splx(s); return EBUSY; } sc->sc_cua = 1; } else { /* tty (not cua) device; wait for carrier if necessary */ if (ISSET(flag, O_NONBLOCK)) { if (sc->sc_cua) { /* Opening TTY non-blocking... but the CUA is busy */ splx(s); return EBUSY; } } else { while (sc->sc_cua || (!ISSET(tp->t_cflag, CLOCAL) && !ISSET(tp->t_state, TS_CARR_ON))) { SET(tp->t_state, TS_WOPEN); error = ttysleep(tp, &tp->t_rawq, TTIPRI | PCATCH, ttopen, 0); /* * If TS_WOPEN has been reset, that means the * cua device has been closed. We don't want * to fail in that case, * so just go around again. */ if (error && ISSET(tp->t_state, TS_WOPEN)) { CLR(tp->t_state, TS_WOPEN); if (!sc->sc_cua && !ISSET(tp->t_state, TS_ISOPEN)) imxuart_pwroff(sc); splx(s); return error; } } } } splx(s); return (*linesw[tp->t_line].l_open)(dev,tp,p); } int imxuartclose(dev_t dev, int flag, int mode, struct proc *p) { int unit = DEVUNIT(dev); struct imxuart_softc *sc = imxuart_cd.cd_devs[unit]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct tty *tp = sc->sc_tty; int s; /* XXX This is for cons.c. */ if (!ISSET(tp->t_state, TS_ISOPEN)) return 0; (*linesw[tp->t_line].l_close)(tp, flag, p); s = spltty(); if (ISSET(tp->t_state, TS_WOPEN)) { /* tty device is waiting for carrier; drop dtr then re-raise */ CLR(sc->sc_ucr3, IMXUART_CR3_DSR); bus_space_write_2(iot, ioh, IMXUART_UCR3, sc->sc_ucr3); timeout_add(&sc->sc_dtr_tmo, hz * 2); } else { /* no one else waiting; turn off the uart */ imxuart_pwroff(sc); } CLR(tp->t_state, TS_BUSY | TS_FLUSH); sc->sc_cua = 0; splx(s); ttyclose(tp); return 0; } int imxuartread(dev_t dev, struct uio *uio, int flag) { struct tty *tty; tty = imxuarttty(dev); if (tty == NULL) return ENODEV; return((*linesw[tty->t_line].l_read)(tty, uio, flag)); } int imxuartwrite(dev_t dev, struct uio *uio, int flag) { struct tty *tty; tty = imxuarttty(dev); if (tty == NULL) return ENODEV; return((*linesw[tty->t_line].l_write)(tty, uio, flag)); } int imxuartioctl( dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p) { struct imxuart_softc *sc; struct tty *tp; int error; sc = imxuart_sc(dev); if (sc == NULL) return (ENODEV); tp = sc->sc_tty; if (tp == NULL) return (ENXIO); error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p); if (error >= 0) return (error); error = ttioctl(tp, cmd, data, flag, p); if (error >= 0) return (error); switch(cmd) { case TIOCSBRK: /* */ break; case TIOCCBRK: /* */ break; case TIOCSDTR: #if 0 (void) clmctl(dev, TIOCM_DTR | TIOCM_RTS, DMBIS); #endif break; case TIOCCDTR: #if 0 (void) clmctl(dev, TIOCM_DTR | TIOCM_RTS, DMBIC); #endif break; case TIOCMSET: #if 0 (void) clmctl(dev, *(int *) data, DMSET); #endif break; case TIOCMBIS: #if 0 (void) clmctl(dev, *(int *) data, DMBIS); #endif break; case TIOCMBIC: #if 0 (void) clmctl(dev, *(int *) data, DMBIC); #endif break; case TIOCMGET: #if 0 *(int *)data = clmctl(dev, 0, DMGET); #endif break; case TIOCGFLAGS: #if 0 *(int *)data = cl->cl_swflags; #endif break; case TIOCSFLAGS: error = suser(p); if (error != 0) return(EPERM); #if 0 cl->cl_swflags = *(int *)data; cl->cl_swflags &= /* only allow valid flags */ (TIOCFLAG_SOFTCAR | TIOCFLAG_CLOCAL | TIOCFLAG_CRTSCTS); #endif break; default: return (ENOTTY); } return 0; } int imxuartstop(struct tty *tp, int flag) { return 0; } struct tty * imxuarttty(dev_t dev) { int unit; struct imxuart_softc *sc; unit = DEVUNIT(dev); if (unit >= imxuart_cd.cd_ndevs) return NULL; sc = (struct imxuart_softc *)imxuart_cd.cd_devs[unit]; if (sc == NULL) return NULL; return sc->sc_tty; } struct imxuart_softc * imxuart_sc(dev_t dev) { int unit; struct imxuart_softc *sc; unit = DEVUNIT(dev); if (unit >= imxuart_cd.cd_ndevs) return NULL; sc = (struct imxuart_softc *)imxuart_cd.cd_devs[unit]; return sc; } /* serial console */ void imxuartcnprobe(struct consdev *cp) { } void imxuartcninit(struct consdev *cp) { } int imxuartcnattach(bus_space_tag_t iot, bus_addr_t iobase, int rate, tcflag_t cflag) { static struct consdev imxuartcons = { NULL, NULL, imxuartcngetc, imxuartcnputc, imxuartcnpollc, NULL, NODEV, CN_MIDPRI }; int maj; if (bus_space_map(iot, iobase, IMXUART_SPACE, 0, &imxuartconsioh)) return ENOMEM; /* Look for major of com(4) to replace. */ for (maj = 0; maj < nchrdev; maj++) if (cdevsw[maj].d_open == comopen) break; if (maj == nchrdev) return ENXIO; cn_tab = &imxuartcons; cn_tab->cn_dev = makedev(maj, 0); cdevsw[maj] = imxuartdev; /* KLUDGE */ imxuartconsiot = iot; imxuartconsaddr = iobase; imxuartconscflag = cflag; // XXXX: Overwrites some sensitive bits, recheck later. /* bus_space_write_2(imxuartconsiot, imxuartconsioh, IMXUART_UCR1, IMXUART_CR1_EN); bus_space_write_2(imxuartconsiot, imxuartconsioh, IMXUART_UCR2, IMXUART_CR2_TXEN|IMXUART_CR2_RXEN); */ return 0; } int imxuartcngetc(dev_t dev) { int c; int s; s = splhigh(); while((bus_space_read_2(imxuartconsiot, imxuartconsioh, IMXUART_USR2) & IMXUART_SR2_RDR) == 0) ; c = bus_space_read_1(imxuartconsiot, imxuartconsioh, IMXUART_URXD); splx(s); return c; } void imxuartcnputc(dev_t dev, int c) { int s; s = splhigh(); bus_space_write_1(imxuartconsiot, imxuartconsioh, IMXUART_UTXD, (uint8_t)c); while((bus_space_read_2(imxuartconsiot, imxuartconsioh, IMXUART_USR2) & IMXUART_SR2_TXDC) == 0) ; splx(s); } void imxuartcnpollc(dev_t dev, int on) { }