/* $OpenBSD: sxitwi.c,v 1.11 2018/12/04 11:25:48 kettenis Exp $ */ /* $NetBSD: gttwsi_core.c,v 1.2 2014/11/23 13:37:27 jmcneill Exp $ */ /* * Copyright (c) 2008 Eiji Kawauchi. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project by * Eiji Kawauchi. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 2005 Brocade Communcations, inc. * All rights reserved. * * Written by Matt Thomas for Brocade Communcations, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of Brocade Communications, Inc. may not be used to endorse * or promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY BROCADE COMMUNICATIONS, INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL EITHER BROCADE COMMUNICATIONS, INC. BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Marvell Two-Wire Serial Interface (aka I2C) master driver */ #include #include #include #include #include #define _I2C_PRIVATE #include #include #include #include #include #include #include #define TWSI_SLAVEADDR 0 #define TWSI_EXTEND_SLAVEADDR 1 #define TWSI_DATA 2 #define TWSI_CONTROL 3 #define TWSI_STATUS 4 #define TWSI_CLOCK 5 #define TWSI_SOFTRESET 6 #define TWSI_NREG 7 #define SLAVEADDR_GCE_MASK 0x01 #define SLAVEADDR_SADDR_MASK 0xfe #define EXTEND_SLAVEADDR_MASK 0xff #define DATA_MASK 0xff #define CONTROL_ACK (1 << 2) #define CONTROL_IFLG (1 << 3) #define CONTROL_STOP (1 << 4) #define CONTROL_START (1 << 5) #define CONTROL_TWSIEN (1 << 6) #define CONTROL_INTEN (1 << 7) #define STAT_BE 0x00 /* Bus Error */ #define STAT_SCT 0x08 /* Start condition transmitted */ #define STAT_RSCT 0x10 /* Repeated start condition transmitted */ #define STAT_AWBT_AR 0x18 /* Address + write bit transd, ack recvd */ #define STAT_AWBT_ANR 0x20 /* Address + write bit transd, ack not recvd */ #define STAT_MTDB_AR 0x28 /* Master transd data byte, ack recvd */ #define STAT_MTDB_ANR 0x30 /* Master transd data byte, ack not recvd */ #define STAT_MLADADT 0x38 /* Master lost arbitr during addr or data tx */ #define STAT_ARBT_AR 0x40 /* Address + read bit transd, ack recvd */ #define STAT_ARBT_ANR 0x48 /* Address + read bit transd, ack not recvd */ #define STAT_MRRD_AT 0x50 /* Master received read data, ack transd */ #define STAT_MRRD_ANT 0x58 /* Master received read data, ack not transd */ #define STAT_SAWBT_AR 0xd0 /* Second addr + write bit transd, ack recvd */ #define STAT_SAWBT_ANR 0xd8 /* S addr + write bit transd, ack not recvd */ #define STAT_SARBT_AR 0xe0 /* Second addr + read bit transd, ack recvd */ #define STAT_SARBT_ANR 0xe8 /* S addr + read bit transd, ack not recvd */ #define STAT_NRS 0xf8 /* No relevant status */ #define SOFTRESET_VAL 0 /* reset value */ struct sxitwi_softc { struct device sc_dev; bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; int sc_node; u_int sc_started; u_int sc_twsien_iflg; struct i2c_controller sc_ic; struct rwlock sc_buslock; void *sc_ih; uint8_t sc_regs[TWSI_NREG]; int sc_delay; }; void sxitwi_attach(struct device *, struct device *, void *); int sxitwi_match(struct device *, void *, void *); void sxitwi_bus_scan(struct device *, struct i2cbus_attach_args *, void *); int sxitwi_intr(void *); int sxitwi_acquire_bus(void *, int); void sxitwi_release_bus(void *, int); int sxitwi_send_start(void *, int); int sxitwi_send_stop(void *, int); int sxitwi_initiate_xfer(void *, i2c_addr_t, int); int sxitwi_read_byte(void *, uint8_t *, int); int sxitwi_write_byte(void *, uint8_t, int); int sxitwi_wait(struct sxitwi_softc *, u_int, u_int, int); static inline u_int sxitwi_read_4(struct sxitwi_softc *, u_int); static inline void sxitwi_write_4(struct sxitwi_softc *, u_int, u_int); struct cfdriver sxitwi_cd = { NULL, "sxitwi", DV_DULL }; struct cfattach sxitwi_ca = { sizeof(struct sxitwi_softc), sxitwi_match, sxitwi_attach }; int sxitwi_match(struct device *parent, void *match, void *aux) { struct fdt_attach_args *faa = aux; return (OF_is_compatible(faa->fa_node, "allwinner,sun4i-a10-i2c") || OF_is_compatible(faa->fa_node, "allwinner,sun6i-a31-i2c") || OF_is_compatible(faa->fa_node, "allwinner,sun7i-a20-i2c") || OF_is_compatible(faa->fa_node, "marvell,mv78230-i2c") || OF_is_compatible(faa->fa_node, "marvell,mv78230-a0-i2c")); } void sxitwi_attach(struct device *parent, struct device *self, void *aux) { struct sxitwi_softc *sc = (struct sxitwi_softc *)self; struct fdt_attach_args *faa = aux; struct i2cbus_attach_args iba; uint32_t freq, parent_freq; uint32_t m, n, nbase; if (faa->fa_nreg < 1) { printf(": no registers\n"); return; } nbase = 1; sc->sc_regs[TWSI_SLAVEADDR] = 0x00; sc->sc_regs[TWSI_EXTEND_SLAVEADDR] = 0x04; sc->sc_regs[TWSI_DATA] = 0x08; sc->sc_regs[TWSI_CONTROL] = 0x0c; sc->sc_regs[TWSI_STATUS] = 0x10; sc->sc_regs[TWSI_CLOCK] = 0x14; sc->sc_regs[TWSI_SOFTRESET] = 0x18; if (OF_is_compatible(faa->fa_node, "marvell,mv78230-i2c") || OF_is_compatible(faa->fa_node, "marvell,mv78230-a0-i2c")) { nbase = 2; sc->sc_delay = 1; sc->sc_regs[TWSI_SLAVEADDR] = 0x00; sc->sc_regs[TWSI_EXTEND_SLAVEADDR] = 0x10; sc->sc_regs[TWSI_DATA] = 0x04; sc->sc_regs[TWSI_CONTROL] = 0x08; sc->sc_regs[TWSI_STATUS] = 0x0c; sc->sc_regs[TWSI_CLOCK] = 0x0c; sc->sc_regs[TWSI_SOFTRESET] = 0x1c; } /* * Calculate clock dividers up front such that we can bail out * early if the desired clock rate can't be obtained. Make * sure the bus clock rate is never above the desired rate. */ parent_freq = clock_get_frequency(faa->fa_node, NULL); freq = OF_getpropint(faa->fa_node, "clock-frequency", 100000); if (parent_freq == 0) { printf(": unknown clock frequency\n"); return; } n = 0, m = 0; while ((freq * (nbase << n) * 16 * 10) < parent_freq) n++; while ((freq * (nbase << n) * (m + 1) * 10) < parent_freq) m++; if (n > 8 || m > 16) { printf(": clock frequency too high\n"); return; } sc->sc_node = faa->fa_node; sc->sc_iot = faa->fa_iot; if (bus_space_map(sc->sc_iot, faa->fa_reg[0].addr, faa->fa_reg[0].size, 0, &sc->sc_ioh)) { printf(": can't map registers\n"); return; } rw_init(&sc->sc_buslock, sc->sc_dev.dv_xname); /* * On the Allwinner A31 we need to write 1 to clear a pending * interrupt. */ sc->sc_twsien_iflg = CONTROL_TWSIEN; if (OF_is_compatible(sc->sc_node, "allwinner,sun6i-a31-i2c")) sc->sc_twsien_iflg |= CONTROL_IFLG; sc->sc_started = 0; sc->sc_ic.ic_cookie = sc; sc->sc_ic.ic_acquire_bus = sxitwi_acquire_bus; sc->sc_ic.ic_release_bus = sxitwi_release_bus; sc->sc_ic.ic_exec = NULL; sc->sc_ic.ic_send_start = sxitwi_send_start; sc->sc_ic.ic_send_stop = sxitwi_send_stop; sc->sc_ic.ic_initiate_xfer = sxitwi_initiate_xfer; sc->sc_ic.ic_read_byte = sxitwi_read_byte; sc->sc_ic.ic_write_byte = sxitwi_write_byte; pinctrl_byname(faa->fa_node, "default"); /* Enable clock */ clock_enable(faa->fa_node, NULL); reset_deassert_all(faa->fa_node); /* Set clock rate. */ sxitwi_write_4(sc, TWSI_CLOCK, (m << 3) | (n << 0)); /* Put the controller into Soft Reset. */ sxitwi_write_4(sc, TWSI_SOFTRESET, SOFTRESET_VAL); /* Establish interrupt */ sc->sc_ih = fdt_intr_establish(faa->fa_node, IPL_BIO, sxitwi_intr, sc, sc->sc_dev.dv_xname); if (sc->sc_ih == NULL) { printf(": can't establish interrupt\n"); return; } printf("\n"); /* Configure its children */ memset(&iba, 0, sizeof(iba)); iba.iba_name = "iic"; iba.iba_tag = &sc->sc_ic; iba.iba_bus_scan = sxitwi_bus_scan; iba.iba_bus_scan_arg = &sc->sc_node; config_found(&sc->sc_dev, &iba, iicbus_print); } void sxitwi_bus_scan(struct device *self, struct i2cbus_attach_args *iba, void *arg) { int iba_node = *(int *)arg; struct i2c_attach_args ia; char name[32]; uint32_t reg[1]; int node; for (node = OF_child(iba_node); node; node = OF_peer(node)) { memset(name, 0, sizeof(name)); memset(reg, 0, sizeof(reg)); if (OF_getprop(node, "compatible", name, sizeof(name)) == -1) continue; if (name[0] == '\0') continue; if (OF_getprop(node, "reg", ®, sizeof(reg)) != sizeof(reg)) continue; memset(&ia, 0, sizeof(ia)); ia.ia_tag = iba->iba_tag; ia.ia_addr = bemtoh32(®[0]); ia.ia_name = name; ia.ia_cookie = &node; config_found(self, &ia, iic_print); } } u_int sxitwi_read_4(struct sxitwi_softc *sc, u_int reg) { KASSERT(reg < TWSI_NREG); return bus_space_read_4(sc->sc_iot, sc->sc_ioh, sc->sc_regs[reg]); } void sxitwi_write_4(struct sxitwi_softc *sc, u_int reg, u_int val) { KASSERT(reg < TWSI_NREG); bus_space_write_4(sc->sc_iot, sc->sc_ioh, sc->sc_regs[reg], val); } int sxitwi_intr(void *arg) { struct sxitwi_softc *sc = arg; u_int val; val = sxitwi_read_4(sc, TWSI_CONTROL); if (val & CONTROL_IFLG) { sxitwi_write_4(sc, TWSI_CONTROL, val & ~CONTROL_INTEN); return 1; } return 0; } int sxitwi_acquire_bus(void *arg, int flags) { struct sxitwi_softc *sc = arg; if (flags & I2C_F_POLL) return 0; return rw_enter(&sc->sc_buslock, RW_WRITE); } void sxitwi_release_bus(void *arg, int flags) { struct sxitwi_softc *sc = arg; if (flags & I2C_F_POLL) return; rw_exit(&sc->sc_buslock); } int sxitwi_send_start(void *v, int flags) { struct sxitwi_softc *sc = v; int expect; if (sc->sc_started) expect = STAT_RSCT; else expect = STAT_SCT; sc->sc_started = 1; return sxitwi_wait(sc, CONTROL_START, expect, flags); } int sxitwi_send_stop(void *v, int flags) { struct sxitwi_softc *sc = v; sc->sc_started = 0; /* * No need to wait; the controller doesn't transmit the next * START condition until the bus is free. */ sxitwi_write_4(sc, TWSI_CONTROL, CONTROL_STOP | sc->sc_twsien_iflg); if (sc->sc_delay) delay(5); return 0; } int sxitwi_initiate_xfer(void *v, i2c_addr_t addr, int flags) { struct sxitwi_softc *sc = v; u_int data, expect; int error, read; sxitwi_send_start(v, flags); read = (flags & I2C_F_READ) != 0; if (read) expect = STAT_ARBT_AR; else expect = STAT_AWBT_AR; /* * First byte contains whether this xfer is a read or write. */ data = read; if (addr > 0x7f) { /* * If this is a 10bit request, the first address byte is * 0b11110. */ data |= 0xf0 | ((addr & 0x300) >> 7); sxitwi_write_4(sc, TWSI_DATA, data); error = sxitwi_wait(sc, 0, expect, flags); if (error) return error; /* * The first address byte has been sent, now to send * the second one. */ if (read) expect = STAT_SARBT_AR; else expect = STAT_SAWBT_AR; data = (uint8_t)addr; } else data |= (addr << 1); sxitwi_write_4(sc, TWSI_DATA, data); return sxitwi_wait(sc, 0, expect, flags); } int sxitwi_read_byte(void *v, uint8_t *valp, int flags) { struct sxitwi_softc *sc = v; int error; if (flags & I2C_F_LAST) error = sxitwi_wait(sc, 0, STAT_MRRD_ANT, flags); else error = sxitwi_wait(sc, CONTROL_ACK, STAT_MRRD_AT, flags); if (!error) *valp = sxitwi_read_4(sc, TWSI_DATA); if ((flags & (I2C_F_LAST | I2C_F_STOP)) == (I2C_F_LAST | I2C_F_STOP)) error = sxitwi_send_stop(sc, flags); return error; } int sxitwi_write_byte(void *v, uint8_t val, int flags) { struct sxitwi_softc *sc = v; int error; sxitwi_write_4(sc, TWSI_DATA, val); error = sxitwi_wait(sc, 0, STAT_MTDB_AR, flags); if (flags & I2C_F_STOP) sxitwi_send_stop(sc, flags); return error; } int sxitwi_wait(struct sxitwi_softc *sc, u_int control, u_int expect, int flags) { u_int status; int timo; sxitwi_write_4(sc, TWSI_CONTROL, control | sc->sc_twsien_iflg); for (timo = 10000; timo > 0; timo--) { control = sxitwi_read_4(sc, TWSI_CONTROL); if (control & CONTROL_IFLG) break; delay(1); } if (timo == 0) return ETIMEDOUT; if (sc->sc_delay) delay(5); status = sxitwi_read_4(sc, TWSI_STATUS); if (status != expect) return EIO; return 0; }