/* $OpenBSD: gpioow.c,v 1.5 2011/07/03 15:47:16 matthew Exp $ */ /* * Copyright (c) 2006 Alexander Yurchenko * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* * 1-Wire bus bit-banging through GPIO pin. */ #include #include #include #include #include #include #define GPIOOW_NPINS 1 #define GPIOOW_PIN_DATA 0 struct gpioow_softc { struct device sc_dev; void * sc_gpio; struct gpio_pinmap sc_map; int __map[GPIOOW_NPINS]; struct onewire_bus sc_ow_bus; struct device * sc_ow_dev; int sc_data; int sc_dying; }; int gpioow_match(struct device *, void *, void *); void gpioow_attach(struct device *, struct device *, void *); int gpioow_detach(struct device *, int); int gpioow_activate(struct device *, int); int gpioow_ow_reset(void *); int gpioow_ow_bit(void *, int); void gpioow_bb_rx(void *); void gpioow_bb_tx(void *); int gpioow_bb_get(void *); void gpioow_bb_set(void *, int); struct cfattach gpioow_ca = { sizeof(struct gpioow_softc), gpioow_match, gpioow_attach, gpioow_detach, gpioow_activate }; struct cfdriver gpioow_cd = { NULL, "gpioow", DV_DULL }; static const struct onewire_bbops gpioow_bbops = { gpioow_bb_rx, gpioow_bb_tx, gpioow_bb_get, gpioow_bb_set }; int gpioow_match(struct device *parent, void *match, void *aux) { struct cfdata *cf = match; struct gpio_attach_args *ga = aux; if (ga->ga_offset == -1) return 0; return (strcmp(cf->cf_driver->cd_name, "gpioow") == 0); } void gpioow_attach(struct device *parent, struct device *self, void *aux) { struct gpioow_softc *sc = (struct gpioow_softc *)self; struct gpio_attach_args *ga = aux; struct onewirebus_attach_args oba; int caps; /* Check that we have enough pins */ if (gpio_npins(ga->ga_mask) != GPIOOW_NPINS) { printf(": invalid pin mask\n"); return; } /* Map pins */ sc->sc_gpio = ga->ga_gpio; sc->sc_map.pm_map = sc->__map; if (gpio_pin_map(sc->sc_gpio, ga->ga_offset, ga->ga_mask, &sc->sc_map)) { printf(": can't map pins\n"); return; } /* Configure data pin */ caps = gpio_pin_caps(sc->sc_gpio, &sc->sc_map, GPIOOW_PIN_DATA); if (!(caps & GPIO_PIN_OUTPUT)) { printf(": data pin is unable to drive output\n"); goto fail; } if (!(caps & GPIO_PIN_INPUT)) { printf(": data pin is unable to read input\n"); goto fail; } printf(": DATA[%d]", sc->sc_map.pm_map[GPIOOW_PIN_DATA]); sc->sc_data = GPIO_PIN_OUTPUT; if (caps & GPIO_PIN_OPENDRAIN) { printf(" open-drain"); sc->sc_data |= GPIO_PIN_OPENDRAIN; } else if ((caps & GPIO_PIN_PUSHPULL) && (caps & GPIO_PIN_TRISTATE)) { printf(" push-pull tri-state"); sc->sc_data |= GPIO_PIN_PUSHPULL; } if (caps & GPIO_PIN_PULLUP) { printf(" pull-up"); sc->sc_data |= GPIO_PIN_PULLUP; } gpio_pin_ctl(sc->sc_gpio, &sc->sc_map, GPIOOW_PIN_DATA, sc->sc_data); printf("\n"); /* Attach 1-Wire bus */ sc->sc_ow_bus.bus_cookie = sc; sc->sc_ow_bus.bus_reset = gpioow_ow_reset; sc->sc_ow_bus.bus_bit = gpioow_ow_bit; bzero(&oba, sizeof(oba)); oba.oba_bus = &sc->sc_ow_bus; sc->sc_ow_dev = config_found(self, &oba, onewirebus_print); return; fail: gpio_pin_unmap(sc->sc_gpio, &sc->sc_map); } int gpioow_detach(struct device *self, int flags) { struct gpioow_softc *sc = (struct gpioow_softc *)self; int rv = 0; gpio_pin_unmap(sc->sc_gpio, &sc->sc_map); if (sc->sc_ow_dev != NULL) rv = config_detach(sc->sc_ow_dev, flags); return (rv); } int gpioow_activate(struct device *self, int act) { struct gpioow_softc *sc = (struct gpioow_softc *)self; int rv = 0; switch (act) { case DVACT_DEACTIVATE: sc->sc_dying = 1; if (sc->sc_ow_dev != NULL) rv = config_deactivate(sc->sc_ow_dev); break; } return (rv); } int gpioow_ow_reset(void *arg) { return (onewire_bb_reset(&gpioow_bbops, arg)); } int gpioow_ow_bit(void *arg, int value) { return (onewire_bb_bit(&gpioow_bbops, arg, value)); } void gpioow_bb_rx(void *arg) { struct gpioow_softc *sc = arg; int data = sc->sc_data; data &= ~(GPIO_PIN_INPUT | GPIO_PIN_OUTPUT | GPIO_PIN_TRISTATE); data |= GPIO_PIN_INPUT; if (data & GPIO_PIN_PUSHPULL) data |= GPIO_PIN_TRISTATE; if (sc->sc_data != data) { sc->sc_data = data; gpio_pin_ctl(sc->sc_gpio, &sc->sc_map, GPIOOW_PIN_DATA, sc->sc_data); } } void gpioow_bb_tx(void *arg) { struct gpioow_softc *sc = arg; int data = sc->sc_data; data &= ~(GPIO_PIN_INPUT | GPIO_PIN_OUTPUT | GPIO_PIN_TRISTATE); data |= GPIO_PIN_OUTPUT; if (sc->sc_data != data) { sc->sc_data = data; gpio_pin_ctl(sc->sc_gpio, &sc->sc_map, GPIOOW_PIN_DATA, sc->sc_data); } } int gpioow_bb_get(void *arg) { struct gpioow_softc *sc = arg; return (gpio_pin_read(sc->sc_gpio, &sc->sc_map, GPIOOW_PIN_DATA) == GPIO_PIN_HIGH ? 1 : 0); } void gpioow_bb_set(void *arg, int value) { struct gpioow_softc *sc = arg; gpio_pin_write(sc->sc_gpio, &sc->sc_map, GPIOOW_PIN_DATA, value ? GPIO_PIN_HIGH : GPIO_PIN_LOW); }